Fanatec ClubSport Formula Wheel Base Quick Guide

Tuning Options

To enter the Tuning Menu, press the Tuning button. Use the right FunkySwitch™ to navigate within the menu. Press it up or down to access 5 setup profiles. Press the FunkySwitch™ right or left to cycle through tuning options, and rotate it to change option values.

Centre Calibration

If centre calibration is required (e.g., after a firmware update of the ClubSport Wheel Base), enter the Tuning Menu by pressing the Tuning Menu Button. With the Tuning Menu active, press the analogue stick and the FunkySwitch™ simultaneously to calibrate the wheel centre.

Diagram Description: Visual indicator shows pressing the Tuning Button and the FunkySwitch™ simultaneously for calibration.

Shifter Calibration

To enter shifter calibration mode, simultaneously press the Tuning Menu Button and the button highlighted below.

Diagram Description: Visual indicator shows pressing the Tuning Button and a specific highlighted button simultaneously for shifter calibration.

Attaching the Steering Wheel

Remove the storage pin.
Align the ClubSport Wheel Base axle to the correct position.
Compress and hold the Quick Release mechanism.
Slide the wheel onto the ClubSport Wheel Base axle.
Release the Quick Release mechanism.

Detaching the Steering Wheel

Compress and hold the Quick Release mechanism.
Slide the wheel off the ClubSport Wheel Base axle.

Modes

To switch between modes, simultaneously press and hold the two highlighted buttons for one second. The wheel base LED indicates the active mode:

Red: PC mode
Blue: PS4™ mode*
Purple: Compatibility mode*

*Not applicable for every Fanatec wheel base. Please check the individual user manual of your Fanatec wheel base.

Button Mapping

The steering wheel features a variety of buttons for control:

R1 Button
R2 Button
L1 Button
L2 Button
L3 Button (Pressable Analogue Stick)
R3 Button (Pressable Analogue Stick)
D-Pad (Directional Pad)
Options Button
Tuning Button
PS Button (PlayStation Button)
Touch Pad Button
Other buttons may be present for specific game functions or compatibility.