Single Pack NLE8.0CN 115-127V 60Hz CSIR
Single pack code number: 195B4304
Overview and Specifications
Single Pack Details
| Position | Title | Code | Amount |
|---|---|---|---|
| 1 | Compressor NLE8.0CN | 105H6095 | 1 |
| 2 | Bolt joint for one compressor | M6 | ø16mm | 118-1917 | 1 |
Compressor Design
- Oil type
- Polyolester
- Oil viscosity
- 32cST
- Oil quantity
- 268cm³ / 9.1fl.oz
- Refr. charge - tech. limit
- 400g / 14.1oz
- Free gas volume comp.
- 2360cm³ / 79.8fl.oz
- Weight
- 10.95kg / 24.1lbs
- Motor protection
- 1# internal
- Winding resistance main
- 1.99Ω (at 25°C)
- Winding resistance aux
- 6.22Ω (at 25°C)
- Max. winding temp.
- 125°C / 257°F
- Max. discharge temp.
- 120°C / 248°F
A photograph of the Secop NLE8.0CN compressor, showing its compact, cylindrical design with electrical connections on top and a label indicating 'N-Series'.
General Configurations with NLE8.0CN
- Motorconfiguration
- CSIR
- Power supply (nominal)
- 115V/60Hz
- Number of phases
- 1
- Voltage range
- 95-135V
- Approvals
- UL
- Starting torque
- HST
- Note
- Electrical equipment is included and pre-assembled to compressor.
Applications with NLE8.0CN
- Refrigerant
- R290
- Application
- LBP+MBP
- System cooling
- fan 3m/s
- Hot gas defrost
- OK
- Long interval pull down
- OK
Electrical Data - Configurations with NLE8.0CN
- Starting device type
- relay
- Run capacitor
- -/-
- Start capacitor
- 240µF
- LRA (locked rotor amps / 4s)
- 23.1A
- RLA (rated load amps / 1s)
- 4.3A
- Cut in current
- 23.1A
Dimensions and Physical Data
Housing Dimensions
- A Height
- 203mm / 7.99in
- B Height
- 197mm / 7.76in
- C Length shell
- 205mm / 8.07in
- D Length w. cover
- 254mm / 10in
- E Width
- 166mm / 6.54in
Diagram showing the compressor outline with labels A, B, C, D, E representing height and width dimensions. Also shows Z, Y, X, W, h indicating connector positions and angles, with 'vertical angle' and 'horizontal angle' indicators.
Connectors
| Suction X | Discharge Y | Process Z | ||||
|---|---|---|---|---|---|---|
| [mm] | [in] | [mm] | [in] | [mm] | [in] | |
| Diameter (i:inside, o:outside) | øi 8,11-8,29 | øi 0,32-0,33 | øi 6,41-6,59 | øi 0,25-0,26 | øi 6,41-6,59 | øi 0,25-0,26 |
| Material | copper | copper | copper | |||
| Horizontal angle | +2° | 0° | 0° | |||
| Vertical angle | +2° | 15° | 21° | |||
| Position l/h/w | 132/69/57 | 5,2/2,7/2,2 | 94/102/81 | 3,7/4/3,2 | -109/94/72 | -4,3/3,7/2,8 |
| Straight tube l. | 12 | 0,5 | 12 | 0,5 | 12 | 0,5 |
Compressor Fixation
Diagram illustrating compressor mounting points. Shows a baseplate with dimensions (BI, Bw, E, ØL, ØS, Sl, Sw, Ll, Lw) in mm and inches. Also shows 'Large holes' and 'Small holes' with dimensions.
Mounting Accessories
| Accessory | One Comp. | Multi Pack |
|---|---|---|
| Bolt joint | M6 | ø16mm | 118-1917 | 118-1918 |
| Bolt joint | ø1/4" | ø16mm | 118-1946 | 118-1949 |
| Bolt joint | ø1/4" | ø19mm | 118-1947 | 118-1919 |
| Snap-on | ø7,3 | ø16mm |
Diagrams showing typical bolt joint and snap-on mounting methods, illustrating components like washers, nuts, sleeves, rubber grommets, clips, and steel pins.
Application Notes
LRA value on compressor label and datasheet may differ due to different test conditions for UL approval. Provision for PE Grounding is located at the PE Stamp on the compressor.
Performance and Operational Data
Configuration Details
- Motorconfiguration
- CSIR
- Power supply (nominal)
- 115V/60Hz 1~
- Refrigerant
- R290
- Application
- LBP+MBP
- Voltage range
- 95-135V
- Starting torque
- HST
- Approvals
- UL (SA3693)
Ambient and Machine Room Temperatures
- Ambient temperature range
- 10 - 43°C / 50 - 110°F
- Machine room temperature range
- 10 - 48°C / 50 - 119°F
- Compressor cooling
- fan 3m/s
Graph showing the operation pressure range for the compressor. The X-axis represents evaporating pressure in °C and °F, and the Y-axis represents condensing pressure in bara. Two lines indicate 'continuous operation' and 'transitory operation'.
Graph showing condensing pressure in bara versus evaporating pressure in bara. Two lines indicate 'continuous operation' and 'transitory operation'.
Optimization and Standard Conditions
| pe [°C] | pe [°F] | pc [°C] | pc [°F] | RGT [°C] | RGT [°F] | Tliq [°C] | Tliq [°F] | Cooling capacity [W] | [Btu/h] | [kcal/h] | COP [W/W] | [Btu/Wh] | [kcal/Wh] | EER | P1 [W] | I [A] | m [kg/h] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| -23 | -10 | 54 | 130 | 32 | 90 | 32 | 90 | 452.8 | 1546 | 389.7 | 1.57 | 5.36 | 1.35 | 288.4 | 3.52 | 4.59 | |
| -25 | -13 | 55 | 131 | 32 | 90 | 55 | 131 | 339.0 | 1158 | 291.7 | 1.22 | 4.16 | 1.05 | 278.3 | 3.45 | 4.22 | |
| -35 | -31 | 40 | 104 | 20 | 68 | 40 | 104 | 267.8 | 915 | 230.5 | 1.24 | 4.25 | 1.07 | 215.5 | 3.11 | 3.06 | |
| -7 | 20 | 54 | 130 | 35 | 95 | 46 | 115 | 807.2 | 2757 | 694.7 | 2.07 | 7.08 | 1.78 | 389.5 | 4.26 | 9.21 | |
| -10 | 14 | 55 | 131 | 32 | 90 | 55 | 131 | 639.9 | 2185 | 550.7 | 1.72 | 5.88 | 1.48 | 371.7 | 4.12 | 8.09 | |
| -10 | 14 | 45 | 113 | 20 | 68 | 45 | 113 | 718.2 | 2453 | 618.1 | 2.10 | 7.17 | 1.81 | 342.2 | 3.92 | 8.82 |
Performance Tables
| [°C/°F] | Cooling capacity [W] | [Btu/h] | [kcal/h] | COP [W/W] | [Btu/Wh] | [kcal/Wh] | EER | P1 [W] | I [A] | m [kg/h] |
|---|---|---|---|---|---|---|---|---|---|---|
| cond. pressure pc= 45/113 | ||||||||||
| -35 [-31] | 252.3 | 861 | 217.1 | 1.16 | 3.97 | 1.00 | 216.7 | 3.12 | 2.83 | |
| -23 [-10] | 437.5 | 1494 | 376.5 | 1.57 | 5.37 | 1.35 | 278.4 | 3.47 | 4.94 | |
| return gas temp. RGT= 32/90 | ||||||||||
| -15 [5] | 615.8 | 2103 | 529.9 | 1.93 | 6.59 | 1.66 | 319.3 | 3.75 | 7.01 | |
| -9 [15] | 763.6 | 2608 | 657.2 | 2.22 | 7.57 | 1.91 | 344.6 | 3.94 | 8.74 | |
| -4 [25] | 939.5 | 3208 | 808.5 | 2.55 | 8.72 | 2.20 | 368.0 | 4.12 | 10.83 | |
| liquid temp Tliq= 45/113 | ||||||||||
| 0 [32] | 1081.3 | 3693 | 930.6 | 2.82 | 9.64 | 2.43 | 383.1 | 4.23 | 12.54 | |
| 7.2 [45] | 1391.2 | 4751 | 1197.3 | 3.41 | 11.65 | 2.94 | 407.8 | 4.41 | 16.35 | |
| cond. pressure pc= 55/131 | ||||||||||
| -35 [-31] | 196.1 | 670 | 168.7 | 0.92 | 3.14 | 0.79 | 213.2 | 3.07 | 2.42 | |
| -23 [-10] | 366.3 | 1251 | 315.2 | 1.27 | 4.33 | 1.09 | 289.0 | 3.52 | 4.57 | |
| return gas temp RGT= 32/90 | ||||||||||
| -15 [5] | 524.1 | 1790 | 451.0 | 1.54 | 5.24 | 1.32 | 341.4 | 3.89 | 6.59 | |
| -9 [15] | 653.9 | 2233 | 562.7 | 1.74 | 5.95 | 1.50 | 375.0 | 4.15 | 8.28 | |
| -4 [25] | 808.0 | 2760 | 695.4 | 1.98 | 6.78 | 1.71 | 407.3 | 4.40 | 10.31 | |
| liquid temp Tliq= 55/131 | ||||||||||
| 0 [32] | 932.6 | 3185 | 802.6 | 2.17 | 7.43 | 1.87 | 428.8 | 4.57 | 11.98 | |
| 7.2 [45] | 1205.7 | 4118 | 1037.6 | 2.59 | 8.83 | 2.22 | 466.4 | 4.87 | 15.71 |
Electrical Accessories and Wiring
Wiring Diagram Description
Diagram showing electrical accessories and wiring for CSIR configuration. Includes components labeled a2 (relay), c (start capacitor), b (plastic cover), and d (cord relief). A schematic shows main winding, winding protector, and start winding connections with numbered components (10-14).
Components (Already Pre-assembled)
- a2 relay: 117U7013
- start capacitor (240µF, 6.3mm): 117U5073
- plastic cover: 103N2011
- cord relief: 103N1010
Service and Safety Information
Service/Repair Notes
Information related to R600a and R290 service.
Brazing Information
Brazing on Suction Connectors (Direct Intake). Warning: Maximum 150°C/302°F at socket. Brazing solder: phosphor (LP7) or silver.
Safety Warnings
- Warning symbol for R600a refrigerant ⚠️.
- Warning symbol for R290 refrigerant ⚠️.
- Exclamation mark symbol indicating caution ❗.
- Symbol indicating incorrect brazing technique (crossed out) ❌.
- Symbol indicating correct brazing technique (checkmark) ✔️.
- Maximum temperature warning for brazing: 150°C/302°F.
