Mitsubishi Electric MXZ-4C36NA2 Multi-Zone Inverter Heat-Pump System Specifications

Specifications: MXZ-4C36NA2

For data on specific indoor units, refer to the MXZ-C Technical and Service Manual.

Category	Parameter	Unit	Value
Cooling* (Non-ducted / Ducted)	Rated Capacity	Btu/h	35,400 / 34,400
	Capacity Range	Btu/h	9,500 - 36,400 / 9,500 - 34,400
	Rated Total Input	W	3,760 / 3,940
	Rated Capacity	Btu/h	36,000 / 34,400
Heating at 47°F* (Non-ducted / Ducted)	Capacity Range	Btu/h	15,500 - 43,000 / 15,500 - 41,400
	Rated Total Input	W	3,020 / 3,100
	Rated Capacity	Btu/h	22,200 / 20,300
Heating at 17°F* (Non-ducted/Ducted)	Rated Total Input	W	3,340 / 3,450
Heating at 17°F* (Non-ducted/Ducted)	Connectable Capacity	Btu/h	12,000 - 42,000
Electrical Requirements	Power Supply	Voltage, Phase, Hertz	208 / 230V, 1-Phase, 60 Hz
	Recommended Fuse/Breaker Size	A	25
	MCA	A	22.1
Voltage	Indoor - Outdoor S1-S2	V	AC 208 / 230
Voltage	Indoor - Outdoor S2-S3	V	DC ±24
Compressor			INVERTER-driven Scroll Hermetic
Fan Motor (ECM)		F.L.A.	2.43
Sound Pressure Level	Cooling	dB(A)	54
Sound Pressure Level	Heating	dB(A)	56
External Dimensions (H x W x D)		In / mm	31-11/32 x 37-13/32 x 13 (796 x 950 x 330)
Net Weight		Lbs / kg	139 (63)
External Finish			Munsell 3.0Y 7.8/1.1
Refrigerant Pipe Size O.D.	Liquid (High Pressure)	In / mm	1/4 (12.7)
Refrigerant Pipe Size O.D.	Gas (Low Pressure)	In / mm	A: 1/2 (6.35); B,C,D: 3/8 (9.52) 230 (70)
Max. Refrigerant Line Length		Ft / m	230 (70)
Max. Piping Length for Each Indoor Unit		Ft / m	82 (25)
Max. Refrigerant Pipe Height Difference	If IDU is Above ODU	Ft / m	49 (15)
Max. Refrigerant Pipe Height Difference	If IDU is Below ODU	Ft / m	49 (15)
Connection Method			Flared/Flared
Refrigerant			R410A

Rating Conditions per AHRI Standard:

Cooling: Indoor: 80° F (27° C) DB / 67° F (19° C) WB; Outdoor: 95° F (35° C) DB / 75° F (24° C) WB
Heating at 47°F: Indoor: 70° F (21° C) DB; Outdoor: 47° F (8° C) DB / 43° F (6° C) WB
Heating at 17°F: Indoor: 70° F (21° C) DB; Outdoor: 17° F (-8° C) DB / 15° F (-9° C) WB

	Outdoor
Cooling	14 to 115° F (-10 to 46° C) DB
Heating	5 to 65° F (-15 to 18° C) WB

Indoor Unit Type	SEER	EER	HSPF	COP @ 47°F	COP @ 17°F
Non-ducted (09+09+09+09)	19.2	9.4	11.0	3.50	2.67
Ducted and Non-ducted	17.6	9.05	10.4	3.38	2.61
Ducted (09+09+09+09)	16.0	8.7	9.8	3.25	2.54

Notes

For actual capacity performance based on indoor unit type and number of indoor units connected, please refer to MXZ Operational Performance.

Although the maximum connectable capacity can exceed rated, the outdoor unit cannot provide more than 100% of the rated capacity. Mitsubishi Electric Trane HVAC US LLC advises utilizing this over capacity capability for load shedding or applications where it is known that all connected units will NOT be operating at the same time.

Outdoor Unit Accessories: MXZ-4C36NA2

Category	Accessory	Model Number
Ball Valve	Refrigeration Ball Valve - 1/2"	BV12FFS12
	Refrigeration Ball Valve - 1/4"	BV14FFS12
	Refrigeration Ball Valve - 3/8"	BV38FFS12
	Refrigeration Ball Valve - 5/8"	BV58FFS12
Centralized Drain Pan	Drain Pan	PAC-SH97DP-E
Drain Socket	Drain Socket	PAC-SG60DS-E
Hail Guards	Hail Guard	HG-A2
Mounting Pad	Condensing Unit Mounting Pad: 24" x 42" x 3"	ULTRILITE2
Mounting Pad	Outdoor Unit 3-1/4 inch Mounting Base (Pair) - Plastic	DSD-400P
Optional Defrost Heater	Optional Defrost Heater	PAC-645BH-E
Port Adapter	Adaptor: 1/2" x 3/8"	MAC-A455JP-E
	Adaptor: 1/2" x 5/8"	MAC-A456JP-E
	Adaptor: 3/8" x 1/2"	MAC-A454JP-E
	Adaptor: 3/8" x 5/8"	PAC-SG76RJ-E
	24" Dual Fan Stand	QSMS2402M
Stand	Condenser Wall Bracket	QSWB2000M-1
	Condenser Wall Bracket - Stainless Steel Finish	QSWBSS
	Outdoor Unit Stand - 12" High	QSMS1202M

Outdoor Unit Dimensions: MXZ-4C36NA2 (Unit: inch)

The MXZ-4C36NA2 outdoor unit has overall dimensions of approximately 31-11/32 inches (Height) x 37-13/32 inches (Width) x 13 inches (Depth). The unit features various access points and connection points for installation.

Key Dimensions and Features:

Top View: Features a rear air intake, air discharge area, and multiple knockout holes for wiring. Dimensions include 6-7/8" from front to rear for various sections, and a total width of 37-13/32".
Front View: Shows the main fan grille. The unit has handles on the sides.
Side View: Displays the depth of 13 inches. Key features include a side air intake, and various pipe connections.
Bottom View: Includes a 6-1-5/16" drain hole.
Electrical Connections: Two knockout holes (2-7/8" and 3-7/8") are provided for connecting wires.
Foundation Bolt Holes: The base has two U-shaped notched holes and two oval holes (15/32" x 1-13/32") for M10 foundation bolts, with a bolt pitch of 14-9/16" and 16-13/32".
Refrigerant Pipe Connections: Located on the side, these include:
- Unit D: Liquid 1/4" (Ø6.35) FLARE, Gas 3/8" (Ø9.52) FLARE
- Unit C: Liquid 1/4" (Ø6.35) FLARE, Gas 3/8" (Ø9.52) FLARE
- Unit B: Liquid 1/4" (Ø6.35) FLARE, Gas 3/8" (Ø9.52) FLARE
- Unit A: Liquid 1/4" (Ø6.35) FLARE, Gas 1/2" (Ø12.7) FLARE
Conduit Connections: Conduit plates and a conduit connector are present for electrical wiring.

Required Installation Space:

Free Space: A minimum of 19-11/16" or more is required above the unit. A minimum of 3-15/16" or more is required on the sides and rear.
Service Space: A minimum of 13-25/32" or more is required in front of the unit for service access.

	Mitsubishi Electric MXZ-4C36NA2-U1 M-Series Multi-Indoor Inverter Heat Pump System Specifications Technical specifications and submittal data for the Mitsubishi Electric MXZ-4C36NA2-U1 M-Series Multi-Indoor Inverter Heat Pump System, detailing features, capacities, electrical requirements, and dimensions.
	Mitsubishi Electric PVA-AA60NL & PUY-AK60NL HVAC System Specifications Detailed specifications, features, and accessories for the Mitsubishi Electric PVA-AA60NL air handler indoor unit and PUY-AK60NL cooling-only outdoor unit. Learn about performance, efficiency, and installation details for this HVAC system.
	Mitsubishi Electric MXZ-2D20NL: 20,000 BTU/H Heat Pump Outdoor Unit Specifications Detailed technical specifications for the Mitsubishi Electric MXZ-2D20NL outdoor heat pump unit, including general features, performance data for cooling and heating at various temperatures, electrical requirements, dimensions, operating temperature ranges, and available accessories.
	Mitsubishi Electric MXZ-3D30NLHZ Hyper Heat Outdoor Unit Specifications Detailed technical specifications and features for the Mitsubishi Electric MXZ-3D30NLHZ 28,400 BTU/H Hyper Heat Pump Outdoor Unit, including performance data, dimensions, and accessories.
	Mitsubishi Electric NAXMMX24A132AA Multi-Zone Inverter Heat-Pump System: Specifications and Features Comprehensive technical specifications, key features, operating ranges, energy efficiencies, and available accessories for the Mitsubishi Electric NAXMMX24A132AA Multi-Zone Inverter Heat-Pump System.
	Mitsubishi Electric Multi-Split Air Conditioning Systems: MXZ, PUMY Series Comprehensive guide to Mitsubishi Electric's MXZ, MXZ-VFHZ, MXZ-HA, PUMY-SP, PUMY-P, and PUMY-SM series multi-split air conditioning systems, detailing features, specifications, and installation guidelines.
	Mitsubishi Electric MXZ-SM72TAM-U1, MXZ-SM96TAM-U1, MXZ-SM120TAM-U1 Service Manual This service manual provides detailed technical information, troubleshooting guides, and specifications for Mitsubishi Electric MXZ-SM72TAM-U1, MXZ-SM96TAM-U1, and MXZ-SM120TAM-U1 outdoor units.
	Mitsubishi Electric M-Series Zoned Comfort Solutions Catalog Explore the Mitsubishi Electric M-Series Zoned Comfort Solutions catalog, featuring advanced HVAC systems, energy-efficient heat pumps, and smart climate control for residential comfort. Discover model specifications, Hyper-Heating INVERTER technology, and kumo cloud app integration.

MXZ-4C36NA2 Multi-Zone Inverter Heat-Pump System

Features