1080P HD AI PTZ Camera User Manual

Copyright

All contents of this manual, whose copyright belongs to our corporation, cannot be cloned, copied or translated without the permission of our corporation.

Notice

Product specifications and information which were referred to in this document are for reference only. We may change, delete, or update any content at any time and without prior notice.

FCC NOTICE (Class A)

This product complies with Part 15 of the FCC Rules. The operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.

Class A ITE

Class A ITE is a category of all other ITE which satisfies the class A ITE limits but not the class B ITE limits. Such equipment should not be restricted in its sale but the following warning shall be included in the instructions for use:

Warning: Operating this equipment in a residential environment may cause radio interference.

European Community Compliance Statement (Class A)

This product is herewith confirmed to comply with the requirements set out in the Council Directives on the Approximation of the laws of the Member States relating to Electromagnetic Compatibility Directive 2014/30/EU.

Catalogue

1. Safety Precautions
2. Packing List
3. Quick Start
4. Video Format
5. About Product
   • Features
   • Specifications
   • Interface and Switch
   • Dimension
   • Installation
   • Remote Control
6. GUI Settings
   • Menu
   • Exposure
   • Color
   • Image
   • Display
   • P/T/Z Setting
   • Setting
   • Version
   • Default
7. WEB Settings
   • Access Camera
   • Control Camera
   • Video Settings
   • Image Settings
   • Audio Settings
   • System Settings
   • Network Settings
   • NDI® Settings
   • Device Information
   • Download Upgrade Program
8. Troubleshooting

1 Safety Precautions

• During the installation and use of the equipment, all electrical safety regulations of the country and region of use must be strictly observed.
• Please use the power adapter that comes standard with this product.
• Please do not connect multiple devices to the same power adapter (exceeding the capacity of the adapter may generate excessive heat or cause a fire).
• Do not rotate head of the camera by hand, otherwise it may cause mechanical failure.
• When installing this product on a wall or ceiling, secure the device securely. When installing, make sure that there are no obstacles within the rotation range of the gimbal; do not turn on the power until all installations are completed.
• To avoid heat build-up, keep ventilation around the device smooth.
• If the device emits smoke, smells, or makes noises, please turn off the power immediately and unplug the power cord, and contact the dealer in time.
• This device is not waterproof, please keep the device dry.
• This product has no user serviceable parts, damage caused by disassembly by the user is not covered by the warranty.

Notice: Specific frequencies of electromagnetic field may affect the image of the camera!

2 Packing List

3 Quick Start

1) Please check connections are correct before starting.

2) Connect the power adapter to the power connector on the rear panel of the camera. The power indicator on the front panel of the camera is on.

3) After the camera is powered on, it starts to initialize, right up to the limit position, and then both horizontal and vertical go to the middle position, the motor stops running, and the initialization is completed. (Note: If preset 0 is saved, PTZ will be move to preset 0)

4 Video Format

5 About Product

5.1 Features

• 60.7° Wide-angle Lens + 30x Optical Zoom: 60.7° high-quality ultra-wide-angle lens, optical zoom up to 30x, support 8x digital zoom.
• 1080P Full HD: Using 1/2.8-inch high-quality HD CMOS sensor with effective 2.07 million pixels, it can achieve high-quality images with a maximum resolution of 1920x1080.
• New ISP Image Processing Algorithm: The new generation of ISP image processing algorithm provides more complete white balance and automatic exposure functions, which significantly improves the image output performance of the camera, and the imaging effect is also better. Widely used in education recording and broadcasting, distance education, video conferencing, live broadcasting, broadcasting and other industries.
• Upgraded AI Technology: Using upgraded AI technology, through face recognition, it can accurately determine the location of people, realize automatic tracking and automatic frame selection.
• 1080P60 NDI®|HB: It supports 1080P60 NDI®|HB technology, ultra-low latency high-quality audio and video signal transmission, and can achieve unparalleled ultra-high-resolution image quality and lossless effects that are closer to vision.
• Leading Auto Focus Technology: Using advanced focusing algorithm, the lens can focus quickly, accurately and stably.
• Audio Processing Algorithm: The exclusive audio processing algorithm can eliminate reverberation, effectively reduce environmental noise, and support EQ adjustment to optimize sound effects; the device supports dual mic pickup, and can also be connected to external microphones, wireless bees, etc., to meet the pickup needs of most scenarios.
• Multiple Interfaces: Support HDMI and 3G-SDI interface, effective transmission distance of 3G-SDI is up to 150 meters (1080P30). HDMI, 3G-SDI, LAN can output three HD digital signals at the same time.
• Remote Control: Through the RS232 and RS485 serial ports, the camera can be controlled remotely.

5.2 Specifications

General Specifications

Note: Product specifications and parameters are subject to change without notice.

5.3 Interface and Switch

The diagram shows the interfaces and switches on the camera.

Item Descriptions:

5.4 Dimension

The diagram shows the physical dimensions of the camera.

5.5 Installation

The manual provides instructions for both Wall-Mount and Ceiling-Mount installations. The installation diagrams are for reference only, and brackets and screws are not standard. Please refer to the actual product for packing accessories.

5.6 Remote Control

The manual details the functions of each button on the remote control:

• 1. Standby Key: Press to enter standby mode.
• 2. Number Key: Press to set preset or call preset.
• 3. * Key: Use with other keys.
• 4. PRESET Key: Set preset: [PRESET] + Number key (0-9).
• 5. HOME Key: Confirm selection or press to turn PTZ back to the middle position.
• 6. Return Key: Press to return to the previous menu.
• 7. ZOOM Key: SLOW: Zoom In [+] or Zoom Out [-] slowly; FAST: Zoom In [+] or Zoom Out [-] fast.
• 8. L/R SET Key: Standard: Simultaneously press L/R SET + 1; Reverse: Simultaneously press L/R SET + 2.
• 9. FOCUS Key: Auto/Manual/Far/Near focus.
• 10. CAMERA SELECT Key: Press to select and control the camera.
• 11. # Key: Use with other keys.
• 12. IR Remote Control Key: Used for addressing: [*]+[#]+[F1]: Address 1, [*]+[#]+[F2]: Address 2, [*]+[#]+[F3]: Address 3, [*]+[#]+[F4]: Address 4.
• 13. RESET Key: Clear preset position: [RESET] + Number key (0-9).
• 14. PTZ Control Key: PTZ moves according to the arrow indicators.
• 15. MENU Key: Press to enter or exit OSD Menu.
• 16. BACKLIGHT Key: Backlight ON/OFF: Press repeatedly to enable or disable the backlight compensation. NOTE: Effective only in auto exposure mode. If there is a light behind the subject, the subject will become dark, press the backlight key to enable the backlight compensation. Press again to disable this function.
• 17. P/T RST (PTZ Reset) Key: PTZ starts to self-test after pressed.

Shortcut Set:

• [*]+[#]+[1]: OSD menu default English
• [*]+[#]+[3]: OSD menu default Chinese
• [*]+[#]+[4]: Display current IP address
• [*]+[#]+[6]: Quickly recover the default
• [*]+[#]+[8]: View the camera version
• [*]+[#]+[9]: Quickly set up inversion
• [*]+[#]+[MANUAL]: Restore default IP address

6 GUI Settings

6.1 Menu

Press [MENU] key to display the main menu. Use arrow keys to navigate and [HOME] key to enter sub-menus.

Menu Options:

• ENG/中文: ENG, 中文.
• AI MODE: Off, Single Track, Frame Track, Demo Mode.
• Video Format: 1080P60, 1080P50, 1080I60, 1080I50, 1080P30, 1080P25, 720P60, 720P50.
• Style: Default, Cold, Warm, Clear, Soft, User1, User2, User3.

6.2 Exposure

Navigate to [Exposure] and press [HOME].

Exposure Settings: AE, Flicker, Expcomp Mode, Expmode, Backlight, Bright, Gain Limit, Iris, Shutter, Gain, DRC Mode.

Detailed explanations for each setting are provided, including their effective modes and ranges.

6.3 Color

Navigate to [Color] and press [HOME].

Color Settings: AWB, Sens, R-Tuning, B-Tuning, Hue, Saturation.

AWB: Auto, VAR, Manual, One Push, Indoor, Outdoor.

Sens: Low, Middle, High.

R-Gain, B-Gain, R-Tuning, B-Tuning, Hue, Saturation, Temp settings are also detailed with their respective ranges and effective modes.

6.4 Image

Navigate to [Image] and press [HOME].

Image Settings: Brightness, Contrast, Sharpness Mode, Gamma Mode, Gamma, NR-2D Mode, NR-3D Mode.

Detailed explanations for each setting are provided, including their effective modes and ranges.

6.5 Display

Navigate to [Display] and press [HOME].

Display Settings: OSD-Dir, Frac Rate, HDMI Mode, SDI Mode, Flip-H, Flip-V, Freeze.

OSD-Dir: 0, 90, 180, 270.

HDMI Mode: HDMI, DVI.

SDI Mode: Level A, Level B.

Flip-H, Flip-V, Freeze: On, Off.

6.6 P/T/Z Setting

Navigate to [P/T/Z Setting] and press [HOME].

P/T/Z Settings: AF-Sense, AF-Zone, Focus Limit, LR Mode, Motion Sync, Horizontal Speed, Vertical Speed, Zoom Speed, PTbyZoom.

AF-Sense: High, Normal, Low.

AF-Zone: Front, Top, Center, Bottom.

Focus Limit: On, Off.

Near Focus Limit: 1M, 1.5M, 2M, 3M, 4M, 5M, 6M, 8M, 10M, 15M, 20M (Effective only in Focus Limit to On).

Far Focus Limit: 15M, 20M, Infinity (Effective only in Focus Limit to On).

LR Mode: STD, REV.

Motion Sync: On, Off.

Horizontal Speed: 0~23.

Vertical Speed: 0~19.

Zoom Speed: 0~7.

PTbyZoom: On, Off.

6.7 Setting

Navigate to [Setting] and press [HOME].

Setting Options: Visca Addr, Visca Mode, Baud Rate, DHCP, IP Addr, MAC.

Visca Addr: 1~7 (Effective only in VISCA protocol).

Visca Mode: Serial, Paral.

Baud Rate: 2400, 4800, 9600, 19200, 38400, 57600, 115200.

DHCP: On, Off.

IP Addr: 192.168.100.88.

MAC: d4e08e548d13.

6.8 Version

Navigate to [Version] and press [HOME].

Version Information: Main, AF, Date, Code, NDI License.

Main: Displays the version number of the main program.

AF: Displays the camera autofocus version number.

Date: Displays the burning date of the main program version.

Code: Displays the camera code.

NDI License: Displays NDI license verification results.

6.9 Default

Navigate to [Default] and press [HOME].

Default Settings: Reset (Yes/No).

Note: GUI menu and parameters are subject to change without notice.

7 WEB Settings

7.1 Access Camera

Access http://192.168.100.88 to log in with default credentials (username: admin, password: admin). The interface displays live video, image, audio, system, network, NDI, and information sections.

7.2 Control Camera

The interface includes real-time monitoring and parameter setup with function buttons.

Video Viewing Window: Video resolution determines the viewing area size. Double-clicking toggles full-screen mode.

Status Bar: Includes video playback controls (pause, stop, recover), audio controls (volume, mute), and a full-screen switch button.

B. PTZ Setup

1) Pan and Tilt Control: Use arrow keys and the HOME button for manual camera movement.

2) Zoom: Zoom In/Out buttons adjust the view.

3) Focus: Focus In/Out buttons for manual focus adjustment.

4) PTZ Speeds: Pan speed (1-24), Tilt speed (1-20), Zoom and Focus speeds (1-7) can be set.

5) PTZ Presets: Save and recall camera positions using preset numbers (0-254). Use 'Set' to save and 'Call' to recall.

6) PTZ/OSD Dropdown: Access the on-screen display menu for camera control.

C. Language Selection

Select from English, Chinese (Simplified), or Russian to change the webpage language.

7.3 Video Settings

Configure video stream settings for the first and second streams.

1) Frac Rate: Turn On/Off Frac Rate.

2) Encode Level: Supports baseline, mainprofile, highprofile, and svc-t.

3) Encode Protocol: Supports H.264 and H.265.

4) Resolution: Configure resolutions for both streams. Higher resolution provides better image quality but uses more bandwidth.

5) Bit Rate: Adjust bit rate for image clarity and network bandwidth compatibility.

6) Frame Rate: Higher frame rates result in smoother motion.

7) I Key Frame Interval: Affects response time.

8) Bit Rate Control: CBR (Constant Bit Rate) or VBR (Variable Bit Rate).

9) Slice Split Enable: Enable or disable slice split function.

10) Slice Size: Set the size of the slice.

7.4 Image Settings

Adjust image parameters:

• Brightness: 0-99 (Default 50).
• Saturation: 0-200 (Default 100).
• Contrast: 0-99 (Default 50).
• Sharpness: 0-99 (Default 20).
• Hue: 0-99 (Default 50).
• Flip: Turn On/Off Flip function.
• Mirror: Turn On/Off Mirror function.

7.5 Audio Settings

Configure audio settings:

• Audio Switch: Turn On/Off audio switch.
• Audio Type: Optional: AAC.
• Sample Rate: Optional: 32K, 48K.
• Bit Rate: Optional: 96K, 128K, 256K.
• Input Type: Optional: LINE IN, MIC.
• Input Vol L: Volume of the left channel.
• Input Vol R: Volume of the right channel.

7.6 System Settings

• Reboot: Click 'Reboot' to restart the system.
• Username and Password: Modify the username and password (letters and numbers only).

7.7 Network Settings

LAN Settings: Configure IP address, Subnet Mask, Gateway, DNS Address, and MAC Address.

NTP Settings: Set Time Zone, Server Address, Time Show, and Subtitle Display.

Port Settings: Configure HTTP Port, RTSP Port, TCP Port, UDP Port, and Sony Visca port.

7.8 NDI® Settings

• NDI® HB: Turn On/Off NDI® HB.
• NDI License: Display NDI License verification results.
• Server IP: Set NDI® Server IP address.
• Group Name: Set NDI® Group Name.
• Key: Set NDI® Key.
• NDI® Firmware Version: Display NDI® Firmware Version.

7.9 Device Information

View device information including Device ID, Device Type, Software Version, Webware Version, and Device Serial Number.

7.10 Download Upgrade Program

Contact the manufacturer for the camera upgrade program. WEB interface and parameters are subject to change without notice.

8 Troubleshooting

Image

• No Image: Check power supply, voltage, power indicator. Turn off power switch to check self-testing. Verify video platform and TV connections.
• Jittery Image: Ensure stable camera installation. Check for vibrating machinery nearby.

Browser Access Issues

• Unable to access camera through Browser: Test network connectivity. Disconnect and reconnect network, reset IP. Verify IP address, subnet mask, gateway. Check for MAC address conflicts and modified web ports. Remember default IP (192.168.100.88), username (admin), and password (admin).

Control Issues

• Remote control cannot control: Check remote battery. Verify camera working mode and remote control address.
• Serial port cannot control: Ensure camera protocol, address, and baud rate match. Check control line connection.

No Video Image in Browser

IE browser may require VLC plug-in. Download and install the 32-bit VLC media player from http://www.videolan.org/vlc. Other browsers generally support H5 and do not require the VLC plug-in.