AGPtEK SW01 Sports Watch User Manual

Important Instructions

1. Warning: Please consult your doctor before starting a new exercise. This smart watch is not intended for medicinal use, although it can dynamically monitor your real-time heart rate. Always consult your doctor before beginning any exercise or dieting program.
2. Device Requirement: This watch supports Android 4.3, iOS 7.0, and Bluetooth 4.0 or above.
3. Charging: Before using the watch, please charge it with a 5V/500mA USB device to ensure it is fully charged. To charge, remove the main unit from your wrist and place it on the USB charging base. Keep the main unit on the charging base for at least 2 hours. Ensure the metal contacts are clean and free from contamination, oxidation, or impurities for good contact. A charging symbol will appear on the screen to indicate charging progress. If the watch is left idle for a long time, recharge it at least once every 3 months.

Getting Started

1. Power On

Long press the bottom of the watch screen for 3 seconds. The watch will power on, and a pairing code may be displayed on the screen to identify the watch.

2. Power Off

Long press the button on the time interface for 3 seconds to enter the secondary menus. Browse through the menus to switch to the 'Power Off' option. Long press this option to enter the Power Off interface. Switch from 'ON' to 'OFF'; numbers 5, 4, 3, 2, 1 will be displayed on the screen. After '1' is displayed, the watch will power off.

3. Reset

From the secondary menus, select the 'Reset' icon and long press it to enter the Reset interface. Switch from 'Off' to 'On' to reset the system, time, and data to factory settings.

4. Install the App

Scan the QR code on the packing box with your phone, or search for "Smart Watch" on Google Play, the App Store, or Myapp store and download it.

5. Connect the Watch to the App

1. Keep your watch close to your phone and open the smart watch APP.
2. Follow the APP connection wizard to find the Bluetooth watch (Bluetooth name: "Smart Watch") and finish pairing. Click 'Next' to complete the connection.
3. For Apple Devices (iOS): A Bluetooth pairing request will be displayed after successfully connecting to the App for the first time. To receive notifications like incoming calls, short messages, QQ, and WeChat, click 'Pair'. Otherwise, you will not receive these notifications.

6. Delete the Watch

To delete the watch after connecting it to your phone, open the APP and choose Setting > My Watch. If you have registered an account and logged in to bind your watch, you need to unbind it by opening the App and choosing Setting > Device Management.

To delete on an Apple device: After following the steps above, choose System > Bluetooth on your phone. Then, tap the exclamation mark ❗ next to the device name and select 'Neglect the Device' from the popup dialog box. This removes the ANCS connection, and you will no longer receive notifications from Apple.

Note: When connecting the watch to the APP for the first time, ensure you grant the APP the necessary permissions. Denying permissions may disable some watch-phone functions.

Function Interface of the Watch

1. Time Mode

After successfully pairing your watch with the APP, the watch will synchronize its time and date with your phone.

2. Step-counting Mode

The watch is in step-counting mode by default when powered on. With the watch on your wrist, if you walk and swing your arms, the watch will record your motion data, which you can view immediately.

3. Riding Mode

On the bicycle interface, long press the button for 3 seconds to enter riding mode. In this mode, the watch records your riding time and calories burned. If you are not riding, the time is not recorded. This mode consumes more power, shortening battery life. To exit riding mode, long press the button for 3 seconds.

4. Heart Rate Detection

On the heart rate detection interface, long press the button to activate the real-time heart rate detection function. Battery life will be shortened in this mode. To exit, long press the button for 3 seconds.

4.1 Placement: Wear your watch on your wrist, approximately 2cm from the inside of your ulnaradius joint.

4.2 Sensor Contact: Ensure the heart rate sensor is snug against your skin for good contact. Otherwise, sensor light may leak, leading to inaccurate measurements. Do not look directly at the green sensor light, as it may cause discomfort.

4.3 Movement: While the watch can detect heart rate dynamically, it is recommended to keep still during detection for faster and more accurate results. You can view dynamic data after measurement.

4.4 Measurement Consistency: If measurements vary significantly, rest and try again. Taking an average of 5 successive measurements can yield a more accurate result.

4.5 Dynamic Readings: Heart rate values may differ based on your state (e.g., talking, eating, drinking). The actual heart rate depends on the current situation.

4.6 Heart Rate Warning: After connecting to the APP, you can set a maximum heart rate warning value. When this value is reached, your watch will vibrate, and the heart rate value will flash, prompting you to stop intensive exercise.

4.7 Consult Doctor: If you are unsure of your maximum or minimum heart rate, consult your doctor before exercising.

4.8 Sensor Cleanliness: Ensure the bottom of the heart rate sensor is clean before measurement. Factors like skin color, thick hair, tattoos, or scars can affect detection results.

4.9 PPG Principle: This heart rate detector uses the PPG measurement principle. Precision may vary due to physiological factors (blood circulation, blood pressure, skin conditions, blood vessel location, and density) affecting light absorption and reflection. Very high or low readings may be incorrect and require re-measurement.

4.10 Heat: Prolonged measurement may cause the watch to heat up. If uncomfortable, remove the watch and wear it again after it cools down.

4.11 Temperature: Measurement is recommended in warm conditions, as cold weather can affect results.

Function Menu

In time mode, long press the button for 3 seconds to access secondary menus. Options include: Back, Sleeping, Remote-control music, Remote-control photo, Find your phone, Vibration on/off, Power off, and Reset.

1. Back [Back Arrow]: Long press for 3 seconds to return to the main interface.
2. Sleeping [Sleep Icon]: Long press for 3 seconds to enter the sleeping setting interface. Two buttons allow switching sleeping mode on/off. A symbol indicates sleeping mode in time mode. Steps are not counted in sleeping mode.
3. Remote-control music [Music Icons]: Enter the music play interface to control your phone's music player (play/pause, previous/next song). Supports system music players. Long press the 'Back' button to return.
4. Remote-control photo and video [Camera Icons]: Enter the interface for remote photo/video control. Long press this button to start the phone's built-in camera for photos. For videos, it starts recording on the first press and stops on subsequent presses. Long pressing exits photo mode.
5. Find your phone [Magnifying Glass Icon]: Long press for 3 seconds to activate. Your phone will ring (if volume is on) to help you locate it. Phone vibration is not supported. Long pressing exits this function.
6. Vibration on/off [Vibration Icons]: Enter the interface to toggle vibration. By default, vibration is ON. When OFF, the watch will not vibrate for notifications.
7. Palming screen-on [Wrist Raise Icon]: If enabled, the watch screen lights up automatically when you raise your wrist to view the time.

APP Functions and Settings

1. Main Interface

The main interface displays step count, distance, and calories burned. Buttons in the upper right corner allow synchronization and sharing of history data. Clicking the heart-shaped icon ❤️ in the center initiates a heart rate test, recording your current heart rate. Detection stops automatically once completed.

Clicking the 'Setting' icon in the upper right corner allows you to configure the heart rate warning (vibration) switch and threshold. After synchronizing settings to the watch, it will vibrate and flash the heart rate value when the maximum is reached.

2. Trend

After synchronizing history data, view exercise records by day, month, and year. You can also see data on step counting, distance, calories burned, and achieved goals.

Synchronized history data also allows viewing sleeping quality and related records.

3. Outdoor Exercise

Enable GPS and network connection on your phone, then open the map in the APP to record your movement and share it to social platforms.

4. Multi-exercise Mode

Choose an exercise to start:

• Rope skipping: Click the icon, press START to begin, and FINISH to stop. The watch records the number of rope skippings.
• Jumping jack: Click the icon, press START to begin, and FINISH to stop. The watch records the number of jumping jacks.
• Sit-up: Click the icon, press START to begin, and FINISH to stop. The watch records the number of sit-ups.
• Treadmill: Click the icon, press START to begin, and FINISH to stop. The watch records the distance covered.

When multi-exercise mode is active, the watch displays corresponding exercise icons. To exit, close the APP or long press the Multi-exercise mode button.

5. Interface for Function Setting

5.1 Personal Information

After entering the APP, it is recommended to set your personal information by choosing Setting > Personal Information. You can set your nickname, head portrait, gender, date of birth, height, weight, step pitch, and unit (metric/imperial). After finishing settings, synchronize your personal information to your watch.

If this is your first time using the APP, register an account with your email address. You can also try without logging in. If you forget your password, click 'Forget Password' to receive a reset link via email.

5.2 Exercise Goal

This function allows you to set your exercise goals.

5.3 Phone Anti-lost

This function helps prevent losing your phone. By default, it is disabled (grey). When enabled, your watch vibrates to alert you if your phone or watch goes beyond the Bluetooth connection distance.

5.4 Music Remote Control

Control your phone's music player (play, pause, previous/next song) via your watch. Supports system-integrated music players.

5.5 Remote-control Photo

Switch the photo function of the APP on or off.

5.6 Call Notification

Receive notifications for incoming calls from contacts in your phone's default address book. No notification is received for calls from third-party address books.

5.7 SMS Notification

Receive notifications for system SMS messages and view them. No notification is received for SMS from third-party applications.

5.8 QQ Notification

For Android devices, enabling this function prompts you to grant notification access permission. It is recommended to grant access for only one APP to avoid notification issues.

5.9 WeChat Notification

Receive WeChat notifications and view their content. This applies to other notifications as well.

Notifications from Foreign Social Applications: The watch supports notifications from applications like Facebook, Twitter, Line, SKYPE, and WhatsApp, displaying their content. When a notification arrives, the watch shows the corresponding social application icon. You can click to view the message or long press to exit.

For Apple systems, all notifications are uniformly pushed by the notification center.

5.10 Alarm Clock Notification

Set up to 4 alarm clocks with options for on/off, snooze time, and alarm cycle. Click 'Synchronize to Device' to apply settings. This function supports offline notification.

5.11 Long-time Sitting Notification

Set on/off, notification interval, time segment, and period for sedentary reminders.

5.12 My Watch

Search for or add a watch.

5.13 Find Watch

Click 'Start' to find your paired watch. If found, it will vibrate to prompt you.

5.14 Device Management

Manage, uninstall, and rename your bound watches.

5.15 Clear Data

Clear data on your watch and the APP.

5.16 Sleeping Preference

Set the sleeping switch manually on the watch or set sleeping start times in the APP. The APP allows setting sleeping for three time segments. The watch enters sleeping state at the start and stops at the end of each segment. Steps are not counted during sleep. Sleeping time can be viewed in the APP's history record.

5.17 User Manual

View help information about using the watch.

5.18 Device Update

Update the watch software.

5.19 About

View the APP version.

System Compatibility

1. Mobile Phone Support

This watch supports nearly 200 mainstream mobile phone models, including iPhone and Android devices.

• Supported iPhones: iPhone 4s, 5, 5C, 5S, 6, 6 Plus, 6S, 6S Plus.
• Supported Android Phones: Xiaomi: MI4, MI 3, NOTE LTE, HM NOTE 2, HM NOTE1S, 4C, HM 2A. HUAWEI: MT7, H60, P7. MEIZU: M1 NOTE, MX4, MX4 PRO, MX5, M2 NOTE. SAMSUNG: S4, S5, S6, NOTE2, NOTE3, NOTE4, NOTE5, A7. OPPO: R7. VIVO: X5 PRO, X5S. LG: NEXUS 5, D885. ONEPLUS: A0001.

2. Supported APP Languages

English, Japanese, Simplified Chinese, Traditional Chinese, French, German, Russian, and Romanian.

3. Supported Watch Information Languages

Japanese, Danish, Korean, Portuguese, Estonian, German, Spanish, Bulgarian, Russian, Czech, Greek, Swedish, Italian, Polish, French, Finnish, Hungarian, and Romanian.

Precautions About Watch Use

1. Theoretically, the watch supports phones/tablets with iOS 7.0+, Android 4.3+, and Bluetooth 4.0, but not all models. Supported models are subject to actual conditions.
2. This watch contains precision components. Do not drop it or hit it against hard objects, as this may cause abrasion or damage.
3. Never dismantle or modify the watch, as this may cause problems or void the warranty.
4. The watch uses 5V/500mA for charging. Do not use power supplies exceeding this voltage load, as it may cause hardware damage.
5. Never throw the watch into fire; it may cause explosion.
6. The watch has a built-in, non-detachable battery. Do not attempt to replace it.
7. The watch operates between 0-45°C, and its charging temperature is also 0-45°C.
8. Care Instructions: If you have sensitive skin or wear the watch too tightly, you may feel uncomfortable. Wipe off sweat promptly. If the watch strap contacts soap, sweat, allergens, or contaminants frequently, it may cause skin irritation. If the watch gets wet, dry it thoroughly before charging to prevent failure or corrosion of charging contacts.
9. Avoid using the watch in environments with high static electricity, high pressure, or strong magnetic fields, as these may cause display issues or malfunction.

Maintenance

• Use mild soap and water to clean the sensor and connector. Cleaning the watch weekly is recommended for frequent users.
• Protect the sensor from scratches.
• Wipe the watch with a damp cloth, using mild soap to remove oil contamination or dust.
• Keep the watch away from powerful chemicals like gasoline, clean solvents, propyl alcohol, alcohol, or insect repellent, as they can damage seals, the case, and the surface.
• After swimming, wash the watch with running water and wipe it dry with a soft cloth.
• Protect the watch from intense impact, extreme temperatures, and direct sunlight.
• The watch is waterproof only when its lens and case are intact. Violent dismantling or assembly may damage its waterproof feature.

FAQs

1. My watch cannot connect to Bluetooth. What should I do?

Answer:

1. Check if your phone supports Bluetooth connection (iPhone 4s with iOS 7.0+, Android 4.3+ or above, or Bluetooth 4.0 compatible devices).
2. Signal interference can affect connection times. If connection fails repeatedly, ensure you are not in an environment with magnetic fields or other Bluetooth devices.
3. Try disconnecting and reconnecting Bluetooth.
4. Close background applications on your phone or restart your phone.
5. Avoid connecting to other Bluetooth devices or functions simultaneously.
6. Ensure the APP is running in the background; otherwise, connection may fail.

2. The watch cannot be found on my phone. Why?

Answer: This is likely due to an ongoing Bluetooth broadcast. Ensure your watch has power, is activated, and is not connected to another phone. Keep it close to your phone. If the issue persists, disconnect Bluetooth on your phone and reconnect in 20 seconds.

3. Should I keep the Bluetooth connection connected always? Will data be lost if disconnected?

Answer: Data from exercise and sleep before synchronization remains on the watch. Once connected via Bluetooth, data uploads automatically. The watch stores approximately one week's data; full storage will overwrite the earliest data. Synchronize data regularly.

Note: Call and SMS notifications require an active Bluetooth connection. Alarm clock notifications support offline use.

4. The distance and calories displayed on the APP differ from the watch. Why?

Answer: Individual physical mechanisms vary, affecting calorie consumption during exercise. Set your personal information in the APP and synchronize it to the watch before viewing exercise data.

5. The watch cannot be charged. Why?

1. Check if the main unit is inserted correctly.
2. If the main unit's electricity is below 3.6V, it may enter a battery precharging phase.

Note: The watch typically enters normal charging state within 3-5 minutes after plugging in the charger.

6. Will Bluetooth radiation from the watch damage my body if worn continuously?

Answer: The Bluetooth radiation is well below American FCC standards and is negligible. Continuous wear does not cause radiation damage to the human body.

7. If I have multiple sleeping periods in a day, does the watch record them together?

Answer: The watch records data for multiple sleeping modes if you manually switch them on.

8. The watch vibrates abnormally. Why?

Answer: Abnormal vibration might be due to the 'phone anti-lost' function being active. Wireless Bluetooth signals can be subject to interference, causing vibration when the signal is weak or the connection is lost. Turn off 'phone anti-lost' if not needed. If abnormal vibration persists, try powering off and on your watch or phone.

9. Is the watch waterproof?

Answer: This watch has a waterproof design with an IP67 rating. It is dustproof and waterproof, allowing normal use when washing your face and hands. With an IP67 rating, it can be used for 30 minutes at a depth of 1 meter underwater.