Nextech QC3859 Outdoor Wireless Wi-Fi PTZ Camera User Manual
1. Product Introduction
Packing list:
- Smart Camera x 1
- Manual x 1
- USB Power Cord x 1
- Power Adapter x 1
- Screw Accessories Package x 1
Smart Camera
Manual
USB Power Cord
Screw Accessories Package
Power Adapter
Basic Parameters
Product Name: Smart Camera
Pixel: 1.0Mp/2.0MP
Video Compression: H.264 High Profile
Image Enhancement: Digital Wide Dynamic 3D Noise Reduction
Local Storage: MicroTF card
Wireless Encryption: WEP/WPA/WPA2 Encryption
Power Input: 5V 1A(Min)
Total Power Consumption: 5W (Max)
Wireless Standard: 2.4G 802.11 b/g/n
Support Platform: Android/iOS
Component Description
Reset Button: Long press "reset" hold 5 seconds.
It is recommended to use 8-64GB high-speed Micro SD card, otherwise it will be difficult for the camera to store and view past video recordings.
2. Install APP
Download APP: scan the QR code below to download and install.
Register and login: open the "Smart Life" APP to register and login according to the prompts.
3.1. Add The Device - Scan QR Code Mode
- Make sure Wi-Fi is available and connected to the Internet.
- Connect the camera to the power, then system startup completed.
- Open "Smart Life" APP, press the '+' in the upper right corner of the main screen (Figure 01); choose "Security & Sensor", click "Smart Camera" (Figure 02) to add camera; and then click "Next step" (Figure 03).
Figure 01: Main screen of the Smart Life app showing the '+' icon for adding a device.
Figure 02: Security & Sensor menu showing the Smart Camera option.
Figure 03: Next step prompt after selecting Smart Camera.
- If the mobile phone is not connected to Wi-Fi, please click "Connect to Wi-Fi" (Figure 04).
- It will jump to the WLAN interface and connect Wi-Fi (Figure 05). Please note that only 2.4 GH Wi-Fi network is supported.
- If the phone is connected to Wi-Fi (Figure 06).
Figure 04: Tip indicating the mobile phone is not connected to Wi-Fi.
Figure 05: WLAN interface showing available networks.
Figure 06: Enter Wi-Fi Password screen, showing 2.4GHz and 5GHz options, with 2.4G Wi-Fi networks supported.
- Click "Confirm". It will jump to the interface to prompt to scan the QR code with the camera and click "Continue" (Figure 07).
- A QR code will prompt on your screen and you need to scan it with the Smart Camera (the camera is about 20-30 cm away from the mobile phone lens). Then click "hear the prompt sound" (Figure 08).
- "Connecting" (Figure 09).
Figure 07: Use Camera to Scan QR Code screen with a prompt to continue.
Figure 08: QR code displayed on the screen for the camera to scan.
Figure 09: Connecting screen showing the progress of the device connection.
- When the progress reaches 100%, connection completed (Figure 13), and click "Finish".
- Then jump to preview interface (Figure 11).
- After closing the device preview interface, the interface returns to the APP home page. At this time, the connected device will appear on the APP home page (Figure 14). Then you can click directly to the device interface to see the monitoring situation without re-adding afterwards.
Figure 10: Device added successfully confirmation.
Figure 11: Preview interface of the Smart Camera.
Figure 12: APP home page showing the connected Smart Camera.
3.2. Add The Device - AP Mode
If you want to use AP Mode, press the reset button on the machine.
- Make sure Wi-Fi is available and connected to the Internet.
- Connect the camera to the power, system startup completed.
- Open "Smart Life" APP, press the '+' in the upper right corner of the main screen (Figure 13); choose "Security & Sensor", click "Smart Camera" (Figure 14) to add camera; Alternatively, choose "other ways" to add (as shown in Figure 15).
Figure 13: Main screen of the Smart Life app showing the '+' icon for adding a device.
Figure 14: Security & Sensor menu showing the Smart Camera option.
Figure 15: Other ways to add a device, including AP Mode.
Note: Before using the "AP Mode", you need to switch to "AP Mode" by lightly pressing the "Reset key" of the device.
- Then click "hot spot configuration" (Figure 16).
- Then click "compatibility mode", clicks "Next" (Figure 17).
- Then click "change Network" (Figure 18).
Figure 16: Select Network Configuration Mode screen showing AP Mode.
Figure 17: Reset the device first prompt.
Figure 18: Enter Wi-Fi Password screen.
- Then enter the password to complete the connection (Figure 19).
- Click Back and return to the APP compatible mode interface, where the Wi-Fi name and the connected Wi-Fi name are displayed. Password, click the "Confirm" button (Figure 20).
- The page jumps to where the interface prompts "Wi-Fi" to connect to the device hotspot and clicks "Connect" (Figure 21).
Figure 19: WLAN interface showing available networks for connection.
Figure 20: Enter Wi-Fi Password screen with a confirm button.
Figure 21: Connect your mobile phone to the device's hotspot screen.
- The interface jumps to the WLAN connection interface, finds the Wi-Fi at the beginning of "Smart Life", and clicks on the connection (Figure 22).
- When the connection is completed, click back and return to the APP interface, at which time the APP display device is connected (Figure 23).
- At this time, the device has been successfully connected; the interface jumps to "Add Device Successful" (Figure 24).
Figure 22: WLAN connection interface showing "Smart Life" Wi-Fi.
Figure 23: Connecting screen showing the progress of the device connection.
Figure 24: Add Device Successful screen.
- Then click "connected", it will jump to the Preview Interface of the Device (Figure 25).
- Close the device preview interface and the interface returns to the APP home page, at which point the connected device will appear on the APP home page (Fig. 26). After entering the device interface to view, no need to re-add, click directly into the device interface to view.
Figure 25: Preview Interface of the Smart Camera.
Figure 26: APP home page showing the connected Smart Camera.
Distribution Information
Distributed by:
Electus Distribution Pty. Ltd.
320 Victoria Rd, Rydalmere
NSW 2116 Australia
www.electusdistribution.com.au
Made in China
