... T46U, SIP-T46S, SIP-T48G, SIP-T46G, SIP-T42G,. SIP-T42S, SIP-T41P, SIP-T41S ... The MAC address of the Yealink IP phones is consisted of a prefix “001565”.
T31P/T31G/T31/T21(P) E2: X ranges from 1 to 2;. T19(P) E2/T30/T30P: X = 1. Note: If you enter an invalid account value for the selected phone model ...
Yealink Configuration Generator Tool User
Guide
SOFTWARE LICENSE AGREEMENT
SOFTWARE LICENSE AGREEMENT FOR YEALINK CONFIGURATION CONVERSION TOOL IS IMPORTANT. PLEASE READ THIS LICENSE AGREEMENT CAREFULLY BEFORE CONTINUING WITH THIS PROGRAM: YEALINK(XIAMEN) NETWORK TECHNOLOGY CO., LTD Software License Agreement (SLA) is a legal agreement between you (either an individual or a single entity) and Yealink(Xiamen) Network Technology CO., LTD. Yealink software product(s) identified above may include associated software components, media, printed materials, and "online" or electronic documentation ("SOFTWARE PRODUCT"). By installing, copying, or otherwise using the SOFTWARE PRODUCT, you agree to be bound by the terms of this SLA. This license agreement represents the entire agreement concerning the program between you and Yealink(Xiamen) Network Technology CO., LTD., (referred to as "licenser"), and it supersedes any prior proposal, representation, or understanding between the parties. If you do not agree to the terms of this SLA, do not install or use the SOFTWARE PRODUCT. The SOFTWARE PRODUCT is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties. The SOFTWARE PRODUCT is licensed, but not sold.
COPYRIGHT
All title, including but not limited to copyrights, in and to the SOFTWARE PRODUCT and any copies thereof are owned by Yealink(Xiamen) Network Technology CO., LTD. or its suppliers. All title and intellectual property rights in and to the content which may be accessed through use of the SOFTWARE PRODUCT is the property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and treaties. This EULA grants you no rights to use such content. All rights not expressly granted are reserved by Yealink(Xiamen) Network Technology CO., LTD.
WARRANTIES
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS GUIDE ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS GUIDE ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF PRODUCTS. YEALINK(XIAMEN) NETWORK TECHNOLOGY CO., LTD. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS GUIDE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Yealink(Xiamen) Network Technology CO., LTD. shall not be liable for errors contained herein nor for incidental or consequential
i
damages in connection with the furnishing, performance, or use of this guide. ii
Yealink Configuration Generator Tool User Guide
Introduction
Yealink Configuration Generator Tool (CGT) provides you with quicker and easier configuration generation, modification, conversion and encryption. This tool includes four interfaces: Phone Configuration, Advanced Configuration, CSV Configurations and Configuration Conversion. This guide provides detailed instructions on each interface. This guide applies to the following IP phones: SIP-T2X IP phones: SIP-T29G, SIP-T27P, SIP-T28P, SIP-T26P, SIP-T23P, SIP-T23G, SIP-T22P,
SIP-T21(P) E2, and SIP-T19(P) E2 SIP-T3X IP phones: SIP-T33G, SIP-T33P, SIP-T31, SIP-T31G, SIP-T31P, SIP-T30, and SIP-T30P SIP-T4X IP phones: SIP-T48U, SIP-T48S, SIP-T46U, SIP-T46S, SIP-T48G, SIP-T46G, SIP-T42G,
SIP-T42S, SIP-T41P, SIP-T41S, SIP-T40G, SIP-T42U, and SIP-T43U SIP-T5X IP phones: SIP-T52S, SIP-T53, SIP-T53W, SIP-T54S, SIP-T54W, SIP-T56A, SIP-T58A,
and SIP-T57W T49G, VP59, and VP530 W52P, W60B, W80B, and W90B Ask Yealink FAE (Field Application Engineer) for Configuration Generator Tool or download it online: http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage. Double click Yealink-supplied "CfgGenerator.exe" to start the application tool and then click the desired tab to access the desired interface. This guide takes Configuration Generator Tool "CGT_2.0.0.17" as an example.
1
Yealink Configuration Generator Tool User Guide
Overview
The following figure shows a graphical representation of the main interface for the configuration generator tool.
The following table lists description of each area.
Area
Description
Menu Bar
Provide common operation options, e.g., Open a configuration file (*.cfg).
Interface Tab
Access each interface. Four interfaces can be accessed: Phone Configuration, Advanced Configuration, CSV Configurations and Configuration Conversion.
Provide supported phone models.
Phone Model Selection
The interface will prompt: "Some of configurations you have created may not work on this new phone model. Are you sure to switch the model?" when you have configured the current phone model and would like to switch to a new one. In this case, we recommend you do not switch to a new phone model.
Note: It is unavailable when in the Configuration Conversion interface.
Configuration Preview
Preview configurations that have been added. You can double-click or right-click the configurations in the Configuration Preview area, and then modify (copy, cut, paste and delete) them.
2
Yealink Configuration Generator Tool User Guide
Menu Bar
The menu bar is a thin bar found at the top of the main interface. The following figure shows a graphical representation of a menu bar.
The following table provides description of supported menu options.
Menu Name
Menu Item
New(N)
File(F)
Open(O)
Save(S)
Menu Shortcut
Description
Ctrl+N
Create a new interface for the selected phone model.
If the configurations are not saved on the current interface, a pop-up message will prompt "Do you want to save your change?". Save the configurations when prompted, otherwise, the configurations will be cleared.
Ctrl+O
Open an existing configuration file (*.cfg). The configurations in the configuration file will be previewed in the Configuration Preview area on the right.
Ctrl+S
Save current configurations of the phone model to your local system in a CFG formatted file. If you save the file for the first time, you will be asked to give it a name and location.
The configuration file format must be *.cfg,
3
Yealink Configuration Generator Tool User Guide
Menu Name
Menu Item
Menu Shortcut
Description
refer to Yealink SIP IP Phone Auto Provisioning Guide for more information.
Save As(A)
Ctrl+Alt+S
Save current configurations of the phone model to local system as a CFG formatted file. You will be asked to rename the file and change the location where you save the file.
File(F)
FTP Upload(F) Alt+F+F
Save current configurations of the phone model to your local system in a CFG formatted file and then upload the file to a FTP server.
Exit(X)
Alt+F+X
Exit the configuration generator tool.
Phone(P)->Mem Alt+C+P+M
ory Key(M)
Configure memory keys for the phone model.
Phone(P)->Line Alt+C+P+L
Key(L)
Configure line keys for the phone model.
Configuratio n(C)
Phone(P)->EXT Key(E)
Alt+C+P+E
Account(A)
Alt+C+A
Configure expansion module keys for the phone model.
Configure account registration settings for the phone model.
Phone Settings(S)
Alt+C+S
Configure general information (language, time zone, NTP server, DST, time and date format, tone set) for the phone model.
Availability of the menu items may differ on different interfaces.
Phone Configuration
Phone configuration interface provides a graphic interface and allows you to click specific keys (e.g., memory keys, line keys, programmable keys) to configure them for the selected phone model, and then generate, modify or delete configuration of these keys.
The following table lists the configurable keys for SIP-T2X and SIP-T19(P) E2 IP phones:
Keys
Line Keys Soft Keys
SIP-T29G/ T27P
SIP-T28 P/T26P
SIP-T23P/T23 G/T22P/T21(P)
E2
SIP-T19(P) E2 /
4
Yealink Configuration Generator Tool User Guide
Keys
Memory Keys Navigation Keys OK/ X CONF HOLD MUTE TRAN
SIP-T29G/ T27P
/
SIP-T28 P/T26P
SIP-T23P/T23 G/T22P/T21(P)
E2
/
SIP-T19(P) E2 /
/
/
/
/
/
/
The following table lists the configurable keys for SIP-T3X IP phones:
Keys
Line Keys Soft Keys Navigation Keys OK/ X MUTE Message TRAN Redial
SIP-T33G/ SIP-T31/T31G/
T33P
T31P
/
/
SIP-T30/T30P
/ /
The following table lists the configurable keys for SIP-T4X IP phones:
Keys
Line Keys Soft Keys Navigation Keys OK X
SIP-T48U/T4 8S/T46U/T4
6S
SIP-T48G/T 46G
SIP-T42G/T42S/T41P /T41S/T40G
SIP-T42U/ T43U
5
Yealink Configuration Generator Tool User Guide
Keys
HOLD MUTE TRANSFER Message Redial
SIP-T48U/T4 8S/T46U/T4
6S
SIP-T48G/T 46G
SIP-T42G/T42S/T41P /T41S/T40G
/
SIP-T42U/ T43U
/
/
/
/
/
/
/
The following table lists the configurable keys for T49G/VP59 IP video phone:
Keys Line Keys Soft Keys HOLD MUTE TRANSFER Redial
T49G /
VP59 /
The following table lists the configurable keys for SIP-T5X IP phones:
Keys
Line Keys Soft Keys Navigation Keys OK X CONF HOLD MUTE TRAN Message Redial
SIP-T52S
SIP-T53/T5 3W
SIP-T54S
/
/
/
/
/
/
/
/
/
/
/
SIP-T54W
SIP-T56A/ T58A
SIP-T57W
/
/
/
/
/
/
/
/
/
/
6
Yealink Configuration Generator Tool User Guide
The following table lists the configurable keys for VP530 IP video phone:
Keys Line Keys Memory Keys
VP530
If you hover your mouse pointer over a configurable key, a tooltip "Click to configure - XXX" (XXX stands for the key name) will appear.
Interface Description
Click Phone Configuration tab to access its interface. The screenshot of Phone Configuration interface is shown as below:
7
Yealink Configuration Generator Tool User Guide Select the desired phone model from the drop-down menu at the top-right corner, and then the corresponding phone image will be displayed on the interface.
Using the Phone Configuration Interface
This section shows some examples to help you use the phone configuration interface. To generate configurations of a speed dial key for SIP-T46G IP phones: 1. Select T46G from the drop-down menu at the top-right corner. 2. Click a desired key (e.g., linekey 1). 3. In the pop-up configuration box, configure the key as the speed dial key.
1) Select Speed Dial from the Type drop-down menu. 2) Enter the phone number you want to dial out in the Value field. 3) (Optional.) Enter the string that will appear on the LCD screen in the Label field. 4) Select the desired line from the Line drop-down menu.
8
Yealink Configuration Generator Tool User Guide 4. Click Add.
9
Yealink Configuration Generator Tool User Guide The configurations of speed dial key are previewed in the Configuration Preview area, the key name in the Key the drop-down menu is changed to Configured-key name (e.g., Configured-linekey 1), and the Add button is changed to Modify.
If you want to save the generated configurations in a CFG formatted file, you can click on File(F)->Save(S) or access the Advanced Configuration interface (refer to Advanced Configuration). The configurations generated from the Advanced Configuration interface (refer to Advanced Configuration) can be synchronized to the Configuration Preview area of the Phone Configuration interface, so they can also be saved to the CFG formatted file. We recommend you do not switch to a new phone model before saving configurations. The configuration settings later generated take effect if configurations are generated both from the Phone Configuration interface and Advanced Configuration interface (refer to Advanced Configuration). To modify configuration settings of the speed dial key for SIP-T46G IP phones: 1. Select T46G from the drop-down menu at the top-right corner. 2. Click the pre-configured speed dial key.
10
Yealink Configuration Generator Tool User Guide The key name in the Key drop-down menu is marked with Configured-.
3. Modify the desired parameter values. 4. Click Modify to modify the settings.
The parameter values previewed in the Configuration Preview area will be changed accordingly. If you want to save the changes to the CFG file, you can click on File(F)->Save(S) or access the Advanced Configuration interface (refer to Advanced Configuration). To delete configurations of the speed dial key for SIP-T46G IP phones: 1. Select T46G from the drop-down menu at the top-right corner. 2. Click the pre-configured speed dial key.
11
Yealink Configuration Generator Tool User Guide The key name in the Key drop-down menu is marked with Configured-.
3. Click Delete to delete the settings. The parameters previewed in the Configuration Preview area will be deleted accordingly. If you want to save the changes to the CFG file, you can click on File(F)->Save(S) or access the Advanced Configuration interface (refer to Advanced Configuration).
You can also double-click or right-click the configurations in the Configuration Preview area, and then modify (copy, cut, paste and delete) them.
Advanced Configuration
Advanced configuration interface provides available M7 parameter prefixes to search for configurations for each phone model, and allows you to generate configurations of phone features (e.g., ACD, call park, LDAP) for the selected phone model, modify or delete configuration settings of these features.
12
Yealink Configuration Generator Tool User Guide
Interface Description
Click Advanced Configuration tab to access its interface. The screenshot of Advanced Configuration interface is shown as below:
Click the Option field to list the available configuration parameter prefixes for the selected phone model. The parameter prefixes are listed in alphabetical order. You can refer to M7 template files or SIP IP Phones Auto Provisioning Guide to find the configuration parameters.
13
Yealink Configuration Generator Tool User Guide
Using the Advanced Configuration Interface
This section shows some examples to help you use the advanced configuration interface. To generate configurations of LDAP feature for SIP-T46G IP phones: 1. Select T46G from the drop-down menu at the top-right corner. 2. Select the M7 parameter prefix of LDAP feature "ldap" from the Option drop-down menu. 3. Do one of the following:
- Configure a desired parameter and then click Add to add the configuration to the Configuration Preview area, and repeat this step until all desired configurations are added.
- Configure all the desired parameters and then click Add/Modify All to add all parameters to the Configuration Preview area.
The configurations of LDAP are previewed in the Configuration Preview area, the Add button is changed to Modify, and the Delete button is added.
14
Yealink Configuration Generator Tool User Guide
4. Click Save or File(F)->Save(S) to save the configurations in the Configuration Preview area to your local system in a CFG formatted file. If you save the file for the first time, you will be asked to give it a name and location.
The configurations generated from the Phone Configuration interface can be synchronized to the Configuration Preview area of the Advanced Configuration interface, so they can also be saved to the CFG formatted file. We recommend you do not switch to a new phone model before saving configurations. The configuration settings later generated take effect if configurations are generated both from the Phone Configuration interface and Advanced Configuration interface.
To modify configuration settings of LDAP feature for SIP-T46G IP phones: 1. Select T46G from the drop-down menu at the top-right corner. 2. Select the M7 parameter prefix of LDAP feature "ldap" from the Option drop-down menu. 3. Do one of the following:
- Modify a desired parameter value and then click Modify, and repeat this step until all the desired parameters are modified.
- Modify all the desired parameters and then click Add/Modify All. The parameter values previewed in the Configuration Preview area will be changed accordingly. 4. Click Save or File(F)->Save(S) to save the changes to the CFG file. To delete configurations of LDAP for SIP-T46G IP phones: 1. Select T46G from the drop-down menu at the top-right corner. 2. Select the M7 parameter prefix of LDAP feature "ldap" from the Option drop-down menu. 3. Do one of the following: - Click Delete to delete a desired parameter, and repeat this step until all the desired parameters
are deleted. - Click Delete All to delete all parameters. The parameter previewed in the Configuration Preview area will be deleted accordingly. 4. Click Save or File(F)->Save(S) to save the changes to the CFG file. You can also double-click or right-click the configurations in the Configuration Preview area, and then modify (copy, cut, paste and delete) them.
CSV Configurations
CSV Configurations interface allows you to type account registration information manually or import a CSV file, and then generate <MAC>.cfg files in batch. Click CSV Configurations tab to access its interface. The screenshot of CSV Configurations interface
15
Yealink Configuration Generator Tool User Guide is shown as below:
You can enter the desired values in the corresponding fields. The following table lists description and valid values of these fields.
Field Name MAC
account
Description
Valid Values
Specify the MAC address of the phone.
12-bit hexadecimal number
Specify the desired account.
VP59/T56A/T58A/T57W/T54W/T48U/T48S/T 48G/T46U/T46S/T46G/T29G: X ranges from 1 to 16; T53W/T53/T53C/T43U/T42G/T42U/T42S: X ranges from 1 to 12; T41P/T41S/T27G: X ranges from 1 to 6; T33P/T33G: X ranges from 1 to 4; T40P/T40G/T26P/T23P/T23G/T22P: X ranges from 1 to 3; T31P/T31G/T31/T21(P) E2: X ranges from 1 to 2; T19(P) E2/T30/T30P: X = 1. Note: If you enter an invalid account value for the selected phone model, configurations of this row will not be generated.
16
Yealink Configuration Generator Tool User Guide
Field Name label
Description
Specify the label of the account.
String
display_name
Specify the display name of the account.
String
user_name
Specify the user name of the String
account for registration.
auth_name
Specify the user name of the String
account for authentication.
password
Specify the password of the account for authentication.
String
enable
Enable or disable the account. 0-Disabled 1-Enabled
0 or 1
sip_server.1.addres s
Specify the IP address or domain name of SIP server1 for the account.
String
sip_server.2.addres s
Specify the IP address or domain name of SIP server2 for the account.
String
ip_address_mode
Specify the IP address mode of the phone.
0-IPv4 1-IPv6
0, 1 or 2
2-IPv4 & IPv6
Valid Values
Specify the Internet port (WAN) type for IPv4/IPv6.
For IPv4:
0-DHCP
For IPv4: 0, 1 or 2
type
2-Static IP Address
For IPv6: 0 or 1
For IPv6:
0-DHCP
1-Static IP Address
17
Yealink Configuration Generator Tool User Guide
Field Name ip
Description
Valid Values
Specify the IP address of the IP address
phone.
mask
Specify the IPv4 subnet mask.
Subnet mask
gateway
Specify the default gateway of the phone.
IP address
In the Add Account column, click + to add a row to configure a new account registration setting for the corresponding phone.
You can click the buttons on the CSV Configurations interface to do the following:
Click Generate to generate <MAC>.cfg files in batch.
You will be asked to give a location for the <MAC>.cfg files.
The configurations generated from the Phone Configuration interface and Advanced Configuration interface can be synchronized to the Configuration Preview area of the CSV Configurations interface. The configurations generated from the CSV Configurations interface can be saved to corresponding <MAC>.cfg file. The configurations in the Configuration Preview area can also be saved to every <MAC>.cfg file. The configuration settings generated from the CSV Configurations interface take effect if those are also generated from the Phone Configuration interface or Advanced Configuration interface.
Click Load CSV File to import a CSV file. The screenshot of a CSV file is shown as below:
The tool is compatible with the old CSV file (only one SIP server). The title names in the CSV file is the same as the field names in the CSV Configurations interface.
18
Yealink Configuration Generator Tool User Guide
Click Save CSV File to save configurations generated from the CSV Configurations interface to your local system in a CSV formatted file.
Click New CSV File to clear configurations generated from the CSV Configurations interface.
Configuration Conversion
Configuration conversion interface allows you to convert and encrypt configuration files. The detailed functions include: Generate <MAC>.cfg files in batch based on specific MAC addresses Encrypt the configuration files
Interface Description
Click Configuration Conversion tab to access its interface. The screenshot of Configuration Conversion interface is shown as below:
1. Mode You can select the conversion mode from the Mode drop-down menu. The conversion mode includes:
Conversion Mode Unified Template MAC(s) Generation File Encryption
Abbreviation M7-MAC(s)
19
Yealink Configuration Generator Tool User Guide
2. AES Key AES key filled in the AES Key field is used to encrypt the configuration files. If the AES Key field is left blank, the configuration file will not be encrypted. The AES key must be a string within 16 characters.
The supported characters of the AES key are: 0 ~ 9, A ~ Z, a ~ z.
3. CFG-MAC Mode This field is used to specify the way for generating the <MAC>.cfg files in batch. It is only configurable when the mode is configured as Unified Template MAC(s) Generation. Available ways: Manual--Specify the range of the MAC addresses for the <MAC>.cfg files manually and then
generate <MAC>.cfg files in batch based on specified MAC addresses and the imported configuration file. For more information on how to specify the MAC addresses, refer to Sequence on page 20. Import File--Import the custom CSV/XLS file and then generate <MAC>.cfg files in batch based on the imported CSV/XLS file and configuration file. For more information on how to customize the CSV/XLS file, refer to File on page 20.
4. Sequence You can specify the range of the MAC addresses in this field for the generated <MAC>.cfg files when the CFG-MAC Mode field is configured as Manual. The value values must be 12 characters and the valid characters are: 0~9, a~f and A~F.
5. Listing You can specify additional MAC addresses in this field for the generated <MAC>.cfg file when the CFG-MAC Mode field is configured as Manual. The valid values are the same as that of the Sequence field. Multiple MAC addresses are separated automatically by carriage returns.
6. Unit This field is used to display the number of the MAC addresses configured in the Sequence and the Listing fields.
7. File This field is configurable when the CFG-MAC Mode field is configured as Import File. The supported file formats are: .csv or .xls. For example, specify 100 MAC addresses in the imported file, and configure account settings for each MAC address. After converting, 100 <MAC>.cfg files which are named after the 100 MAC addresses will be generated. Only when the account configuration parameters generated from the CSV or XLS file have existed in the imported configuration file, the account settings will be written into the corresponding <MAC>.cfg file. For more information on how to import a configuration file, refer to Cfg Template on page 23.
20
Yealink Configuration Generator Tool User Guide
The following table lists the available parameters can be specified in the CSV or XLS file:
Field Mac
Description
Specify the MAC address of the phone.
Valid Values 12-bit hexadecimal number
account
label display_name user_name
Specify the desired account.
VP59/T56A/T58A/T57W/T54W/T48U/T48S /T48G/T46U/T46S/T46G/T29G: X ranges from 1 to 16; T53W/T53/T53C/T43U/T42G/T42U/T42S: X ranges from 1 to 12; T41P/T41S/T27G: X ranges from 1 to 6; T33P/T33G: X ranges from 1 to 4; T40P/T40G/T26P/T23P/T23G/T22P: X ranges from 1 to 3; T31P/T31G/T31/T21(P) E2: X ranges from 1 to 2; T19(P) E2/T30/T30P: X = 1.
Specify the label of the account.
String
Specify the display name of the String
account.
Specify the user name of the account for registration.
String
auth_name
Specify the user name of the account for authentication.
String
password
Specify the password of the account for authentication.
String
enable
Enable or disable the account. 0-Disabled 1-Enabled
0 or 1
sip_server.1.addres Specify the SIP server1 of the
s
account.
String
21
Yealink Configuration Generator Tool User Guide
Field
Description
sip_server.2.addres Specify the SIP server2 of the
s
account.
String
ip_address_mode
Specify the IP address mode of the phone. 0-IPv4
0, 1 or 2
1-IPv6
2-IPv4 & IPv6
Valid Values
Specify the Internet port (WAN) type for IPv4/IPv6.
For IPv4:
0-DHCP
For IPv4: 0, 1 or 2
type
2-Static IP Address
For IPv6: 0 or 1
For IPv6:
0-DHCP
1-Static IP Address
Specify the IP address of the
ip
IP address
phone.
mask
Specify the IPv4 subnet mask. Subnet mask
gateway
Specify the default gateway of IP address
the phone.
22
Yealink Configuration Generator Tool User Guide The following figure shows an example of the CSV or XLS file:
The tool is compatible with the old CSV or XLS file (only one SIP server).
8. Cfg Template The Cfg Template field is used to locate the configuration file to be converted on your local system. Click Browse to locate the configuration file. 9. Destination Path You can set the destination path for the converted configuration file in the Destination Path. The default directory is: D:\. 10. Reset Click Reset to reset the settings of the Configuration Conversion interface to the defaults. 11. Generate Click Generate to convert or encrypt the configuration file.
Using the Configuration Conversion Interface
This section shows some examples to help you use the configuration conversion interface. To convert a M7 configuration file into multiple <MAC>.cfg files when the CFG-MAC mode is configured as Manual: You can convert the M7 configuration file to multiple <MAC>.cfg files, which will be named after the specified MAC addresses. 1. Select Unified Template MAC(s) Generation from the Mode drop-down menu. 2. Mark the Manual radio box in the CFG-MAC Mode field. 3. Enter the range of the MAC addresses in the Sequence field. For example, "001565a10030" -
"001565a10039". You can also enter the additional MAC addresses in the Listing field (the tool will automatically break the line after entering 12 characters).
23
Yealink Configuration Generator Tool User Guide The Unit field shows the number of the MAC addresses configured in the Sequence and the Listing fields.
4. Click Browse in the Cfg Template field to locate the M7 configuration file from your local system. The configurations in the M7 configuration file are previewed in the Configuration Preview area.
5. Click Browse in the Destination Path field to set the directory for saving the converted files. The default directory is "D:\".
6. Click Generate to generate the <MAC>.cfg files. A folder named "Deploy_Generation" is created automatically in the destination directory. You can find the <MAC>.cfg files in this folder. Operation interface is shown as the following figure:
If you want to register accounts on multiple IP phones using <MAC>.cfg files, you need the <MAC>.cfg files with the desired account configurations. Specify the MAC addresses (the MAC addresses of the phones you want to register on) and account configurations in the CSV or XLS file introduced above in advance. The tool will generate multiple <MAC>.cfg files which are named after the specified MAC addresses, and may write the account configurations in the CSV or XLS file into the corresponding generated <MAC>.cfg files. To convert a M7 configuration file into multiple <MAC>.cfg files when the CFG-MAC mode is configured as Import File: 1. Select Unified Template MAC(s) Generation from the Mode drop-down menu. 2. Mark the Import File radio box in the CFG-MAC Mode field. 3. In the File field, click Browse to locate a CSV or XLS file from your local system. Only when the
account configuration parameters generated from the CSV or XLS file have existed in the configuration file, the account settings will be written into the corresponding <MAC>.cfg file. The MAC address of the Yealink IP phones is consisted of a prefix "001565". When generating the 24
Yealink Configuration Generator Tool User Guide CSV formatted file, the "00" of the prefix may be omitted. It will cause the conversion failure, you need to add "00" manually. 4. Click Browse in the Cfg Template field to locate the M7 configuration file from your local system. The configurations in the M7 configuration file are previewed in the Configuration Preview area. 5. Click Browse in the Destination Path to locate the destination directory for saving the converted file. The default directory is "D:\". 6. Click Generate to convert the configuration file. A folder named "Deploy_Generation" is created automatically in the destination directory. You can find the <MAC>.cfg files in this folder. Operation interface is shown as the following figure:
To encrypt the configuration file: 1. Select File Encryption from the Mode drop-down menu. 2. Enter 16 characters in the AES Key field. 3. Click Browse in the Cfg Template field to locate the configuration file to be encrypted.
The configurations in the configuration file are previewed in the Configuration Preview area. 4. Click Browse in the Destination Path to locate the destination directory for saving the encrypted
file. The default directory is "D:\". 5. Click Generate to encrypt the configuration file.
A folder named "Deploy_Generation" is created automatically in the destination directory. You can find the encrypted configuration file in this folder. The name of the configuration file is not changed. Operation interface is shown as the following figure:
25
Yealink Configuration Generator Tool User Guide 26
Microsoft Word 2016 Microsoft Word 2016