Seville Classics UltraDurable NSF Commercial Heavy Duty Metal Rolling Utility Cart, w/ Steel Shelves, Handle Bar for Restaurant, Garage, Warehouse, Kitchen, Office, Top Shelf (36"W x 18"D) : Office Products
Additional parts and accessories are available for purchase online at: www.SevilleClassics.com WEB089 Shelf Liners for Utility Cart (3-Pack) SHE24023 1" Slip Sleeves (8-Pair) FAQS Q. Can I use it outside? A. Our cart is designed for temporary outdoor use. Storing the cart outdoors increases the risk of corrosion from moisture. Q. Can I use it with fewer shelves? Without the handle? A. Yes! You can use the cart with a minimum of two shelves and without the handle. Specifications Dimensions: 34" W x 18" D x 33.5" H Weight capacity: 500 lbs. evenly distributed Weight: 42 lbs. Customer Service Information Telephone: (800) 323-5565 Fax: (310) 533-3899 Hours: 8:30 AM 4:30 PM (PST) Email: Support@SevilleClassics.com Homepage: www.SevilleClassics.com 112018 Commercial-Grade 3-Tier NSF Utility Cart Model: SHE18304BZ Thank you for choosing Seville Classics! We hope that you enjoy your new wallmounted shelving. Please read through this user guide for parts list, assembly instructions, frequently asked questions and further contact information. 112018 Parts List A. Handle (1) D. Slip sleeves (14) B. Shelf (3) E. Locking wheels (2) C. Poles (4) F. Locking wheels (2) Please make sure you have all the parts on this list. If you're missing parts, contact us for replacements at (800) 323-5565 or send an email to Support@SevilleClassics.com Assembly Instructions STEP 1. Press stem of WHEELS (E, F) into bottom of POLES (C). Wheel should "click" when installed. Repeat for all POLES (C). 1 STEP 2. Snap SLIP SLEEVES (D) to the lowest groove on POLES (C). STEP 3. Fit SHELF (B) over the top of the 4 poles and over SLIP SLEEVES (D). TIP: If needed, use a rubber mallet to fasten the shelf. Repeat STEPS 2-3 at chosen height for 2nd shelf. STEP 4. Snap 2 SLIP SLEEVES (D) to poles on the narrow side of the cart. Slide HANDLE (A) over SLIP SLEEVES (D). TIP: Leave space at top of POLES (D) for final shelf. STEP 5. Repeat STEPS 2-3 for final shelf. TIP: If necessary, use a rubber mallet to fasten the shelf. 2Microsoft Publisher 2013 Microsoft Publisher 2013