Instruction Manual for Godox models including: 039, 2ABYN039, Waterproof LED Light, WL8P Waterproof LED Light
GODOX PHOTO EQUIPMENT CO.LTD 039 Waterproof LED Light 2ABYN039 2ABYN039 039
File Info : application/pdf, 2 Pages, 1.60MB
DocumentDocumentGODOX -WL4B 705-WL4B00-00 ±2mm 105G A 90*90 LED Waterproof LED Light WL8P 10 22 IP68 WL8P APP · 160 LED · IP68 · CCT · 22 · 3500mAh 1.5 · APP · 263g · 96+ · TLCI 97+ 10 2700K~8500K 100 40 Instruction Manual - + *1 *1 1/4" Type-C-USB *1 Type-C USB *1 *1 *1 1. 2. 3. 5V/2A () 1 40 5V/2A 1. 1.5 < > LED 2. <FN/MOD> CCT 8500k 100% CCT /FX / FX1 I 100% FX FX : ON Reset:NO MAC: 23CF 2.1 2.1.1 <FN/MOD> CCT 8500k 100% 2.1.2 - 1 +500 -500 +100 -100 2700K~8500K CCT 2700k 100% 2.1.3 1 +10 -10 +1 -1 0%-100% CCT 8500k 0 % 2.2 FX <FN/MOD> 2.2.1 FX 1~8 22 FX + - 22 FX1 I 100% 2.2.2 1 +10 -10 +1 -1 0%-100% 2.3 2.3.1 FN/MOD> FX 8 22 2.3.2 I II III - 1 2.3.3 GodoxLight 2 APP( ) 3 APP APP 4 5 6 7 8 2.3.4 - Reset ( APP ) APP Reset) CRI( ) TLCI( ) WL8P 3.6V/3500mAh/12.6Wh DC 5V/2A 8W IP68 10 2700K~8500K 96 97 0%-100% 10 100% 1.5h APP -10°-40° 11cm*5.7cm*3.25cm 263g * LED * *1 * LED * : CMIIT ID:2020DP13510 : \ 2800K 3200K 4300K 5600K 6500K 8500k : \ 2800K 3200K 4300K 5600K 6500K 8500k 0.5m 1070 lux 99.8(fc) 1100 lux 102(fc) 1160 lux 107(fc) 1180 lux 109(fc) 1200 lux 112(fc) 1250 lux 116(fc) 0.5m 456 lux 42.4(fc) 467 lux 43.4(fc) 490 lux 45.5(fc) 502 lux 46.6(fc) 515 lux 47.8(fc) 529 lux 49.2(fc) 1m 279 lux 25.9(fc) 285 lux 26.5(fc) 300 lux 27.9(fc) 308 lux 28.6(fc) 314 lux 29.1(fc) 323 lux 30(fc) 1m 116 lux 10.8(fc) 119 lux 11.1(fc) 127 lux 11.8(fc) 129 lux 12(fc) 131 lux 12.2(fc) 136 lux 12.6(fc) 2m 75.6 lux 7.03(fc) 78 lux 7.25(fc) 82.1 lux 7.63(fc) 83.6 lux (fc) 85.3 lux 7.93(fc) 88 lux 8.19(fc) 2m 32.4 lux 3.01(fc) 33.2 lux 3.09(fc) 35.2 lux 3.27(fc) 35.9 lux 3.3(fc) 36.6 lux 3.4(fc) 37.8 lux 3.51(fc) QC PASS : : 0755-29609320(8062) : godox@godox.com 2 : 0755-25723423 GODOX Photo Equipment Co., Ltd. Add: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao'an District, Shenzhen 518103, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423 E-mail: godox@godox.com Made in China ( ) ( ) () 12 3 12 0755-29609320-8062 godox.com 705-WL4B00-00 Forward Thank you for purchasing! Waterproof LED light WL8P features The waterproof LED light WL8P is specially designed for underwater photography. It not only has IP68 (waterproof depth of 10 meters) performance, but also freely switch between cold and warm color temperature. The brightness of the WL8P lamp body can be adjusted at any time. It has built-in 22 kinds of FX light effects and a large-capacity lithium battery. It is suitable for outdoor underwater shooting, professional diving lighting, underwater commercial photography and other scenes, creating a variety of creative lighting effects. Mobile APP intelligent control, flexible and convenient. Please safe-keep the instruction including warranty certification for future reference. Main Features · Built-in 160 LED beads, high brightness, wide illumination range · With IP68 waterproof performance, it can be waterproof to 10 meters underwater · CCT dual-color adjustment of warm and cool color temperature of 2700K~8500K · 22 kinds of FX light effects to create various video scenes · 3500mAh built-in lithium battery with long using life span, continuous working up to 1.5 hours with 100% brightness · Support mobile APP intelligent control, convenient and easy to operate · 263g light weight, compact and portable · CRI 96+, it produces high accurate color renditions · TLCI index 97+, it delivers pristine and natural results Warning Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center. Keep out of reach of children. Do not use the product in the presence of flammable gas.In certain circumstance, please pay attention to the relevant warnings. The built-in lithium battery is forbidden to be disassembled, hit, squeezed or put into fire. If there is severe swelling, please do not continue to use it. Do not leave or store the product if the ambient temperature reads over 40°C Always use dedicated chargers for charging, and use them within the specified voltage and temperature range following the operating instructions. The product's body will get hot when being used in hightemperature environment with max. power output for a long time. Please do not touch the body in case of being scalded. Body Display Power Switch Select Button - Button + Button What's in the Box LED Beads 1/4" Bottom Screw Hole Type-C-USB Port Waterproof Light×1 Cold Shoe×1 Type-C-USB Cable×1 Diffuser×1 Carry Case×1 Instruction Manual ×1 Battery 1. Product with built-in non-detachable lithium battery. 2. Battery circuit has overcharge protection, overdischarge protection, overcurrent protection, and short circuit protection. 3. Using 5V/2A power adapter (not included), it takes about 1 hour and 40 minutes to fully charge. Tip: To perform charging and using at same time, please use a 5V/2A power adapter. If the battery (due to overdischarge or unused for a long time) is in a state of power loss, please firstly charge it for a while to release the power loss state, then the charging and using at same time can be performed. Operation 1. Power on Long press power switch for 1.5 seconds to turn on or off the LED light. 2. Mode selection: CCT/FX/Bluetooth Long press FN/MOD selection button to switch the mode and functions. CCT FX1 8500k 100% I 100% CCT shown in the upper left corner of the display, it is bio-color temperature mode. FX+figure shown in the upper left corner of the display, it is FX light effects mode. : ON Reset:NO MAC: 23CF The bluetooth symbol, Reset, bluetooth code, etc. are shown on the display, it is the bluetooth setting function interface. 2.1 Bi-color mode 2.1.1 Short press FN/MOD select dial to switch color temperature adjustment and brightness adjustment. CCT 8500k 100% 2.1.2 Color temperature adjustment Press the "+" button to increase the color temperature value while "-" button to decrease. Short press the button once and the color temperature value will changes in 100K. Long press the button to adjust the value from 2700K to 8500K quickly. CCT 2700k 100% 2.1.3 Brightness adjustment Press the "+" button to increase the brightness value while "-" button to decrease. Short press the button once and the color temperature value will changes in 1%. Long press the button to adjust the value from 0 to 100% quickly. CCT 8500k 0 % 2.2 FX Light Effects Mode (22 kinds) Short press FN/MOD select button to switch FX effects mode selection and its brightness adjustment. 2.2.1 Press the FN/MOD select button to enter light effects modes. Then, short press the "+" and "-"to switch the 22 effects in recycle while long pressing to change them quickly. FX1 I 100% FX Light Effects22 kinds in 8 categories No. Display Scenes I II III 1 Flash Flash Press Paparazzi Conference Sustainable 2 Lightning Discontinuous Frequent Sustainable 3 Broken Bulb Discontinuous Frequent Quick speed 4 TV Slow speed Medium Sustainable speed 5 Candle Discontinuous Frequent Fire 6 Fire Firewood Bonfire Performance 7 Fireworks Short Continuous 8 Strong Light Strong light 2.2.2 FX Brightness Adjustment Press the "+" button to increase the brightness value while "-" button to decrease. Short press the button once and the color temperature value will changes in 1%. Long press the button to adjust the value from 0 to 100% quickly. 2.3 Bluetooth Settings 2.3.1 Short press FN/MOD Select button to switch Bluetooth ON/OFF and Bluetooth Reset. 2.3.2 Bluetooth ON/OFF Short press the "+" button or the "-" button to turn on or off Bluetooth. 2.3.3 Scan QR code following to download the "GodoxLight" mobile APP (available for both Android and Apple systems). For more smartphone APP operations, please open the "help" in APP to gain detailed guidance. 2.3.4 Bluetooth Reset Short press the "+" button or the "-" button to reset the Bluetooth. "Reset" appears on the display, indicating that Bluetooth is resetting. Note: the APP can be used directly on the firstly installed device (smartphone or tablet). When changing to other mobile device, the light shall be reset before the normal usage of APP. Technical Data Model Built-in Lithium Battery Standard Charging Power Source 0utput Power Waterproof Level Color Temperature Range CRI() TLCI() Brightness Range Booth transmission distance Continuous Working Time Control Method Working Environment Temperature Dimension Net Weight WL8P 3.6V/3500mAh/12.6Wh DC 5V/2A 8W Ip68 (10m) 2700K~8500K 96 97 0%-100% 10m 100% brightness1.5h Mobile phone APP -10°C - 40°C 11cm*5.7cm*3.25cm 263g Maintenance - Please wash the LED light with clean freshwater after being used underwater. - This product, except consumables e.g.charger cable and cold shoe and other accessory, is supported with a one-year warranty. - Unauthorized service will void the one-year LED light warranty and will charge relevant maintenance fees. - All repairs and maintenance must be carried out by authorized maintenance center. - Changes made to the specifications or designs may not be reflected in this manual. FCC statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Naked light source Temperature\Distance 2800K 3200K 4300K 5600K 6500K 8500k 0.5m 1070(lux) 99.8(fc) 1100(lux) 102 (fc) 1160(lux) 107(fc) 1180(lux) 109(fc) 1200(lux) 112(fc) 1250(lux) 116(fc) 1m 279(lux) 25.9(fc) 285(lux) 26.5(fc) 300(lux) 27.9(fc) 308(lux) 28.6(fc) 314(lux) 29.1(fc) 323(lux) 30(fc) 2m 75.6(lux) 7.03(fc) 78(lux) 7.25(fc) 82.1(lux) 7.63(fc) 83.6(lux) (fc) 85.3(lux) 7.93(fc) 88(lux) 8.19(fc) With standard cover Temperature\Distance 2800K 3200K 4300K 5600K 6500K 8500k 0.5m 456(lux) 42.4(fc) 467(lux) 43.4(fc) 490(lux) 45.5(fc) 502(lux) 46.6(fc) 515(lux) 47.8(fc) 529(lux) 49.2(fc) 1m 116(lux) 10.8(fc) 119(lux) 11.1(fc) 127(lux) 11.8(fc) 129(lux) 12(fc) 131(lux) 12.2(fc) 136(lux) 12.6(fc) 2m 32.4(lux) 3.01(fc) 33.2(lux) 3.09(fc) 35.2(lux) 3.27(fc) 35.9(lux) 3.3(fc) 36.6(lux) 3.4(fc) 37.8(lux) 3.51(fc) Warranty Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you! Product Model Information Product Code Number Customer Name Information Contact Number Address Seller Name Information Contact Number Address Note: Date of Sale How to Get the Maintenance Service If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation. Inapplicable Cases The guarantee and service offered by this document are not applicable in the following cases: . The product or accessory has expired its warranty period; . Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc; . Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment; . The original identifying information of product or accessory is modified, alternated, or removed; . No valid warranty card; . Breakage or damage caused by using illegally authorized, nonstandard or non-public released software; . Breakage or damage caused by force majeure or accident; . Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope. Note: This form shall be sealed by the seller. Applicable Products The document applies to the products listed on the Product Maintenance lnformation (see below for further information). Other products or accessories (e.g. promotional items, giveaways and additional accessories attached, etc.) aer not included in this warranty scope. Warranty Period The warranty period of products and accessoriesisimplementedaccording to the relevant Product Maintenancelnformation.The warranty period is calculatedfrom the day(purchase date) when the product is bought for the first time,And the purchase date is considered as the date registered onthe warranty card when buying the product. Maintenance and Service Support Information The warranty period and service types of products are implemented according to the following Product Maintenance Information: Product Name Type Parts Circuit Board Maintenance Warranty Service Period(month) Type 12 Customer sends the product to designated site Battery Electrical parts e.g. battery charger, power cord, sync cable, etc. 3 Customer sends the product to designated site 12 Customer sends the product to designated site Other Items Flash tube, modeling lamp, lamp body, lamp cover, lockingdevice, package, etc. No Without warranty Godox After-sale Service Call 0755-29609320-8062 FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The equipment conforms to the RF specification and the use is not restricted.Adobe Acrobat Pro 9.0.0