Summer by Ingenuity Pop 'N Ride Wagon

Important Safety Information

WARNING: Read and follow all warnings and instructions. Failure to do so could result in serious injury or death.

• Adult assembly required. Exercise care when unpacking and assembling product.
• Maximum weight and height of child: 50 lbs. (22.7 kg), 43 in. (109cm) per seat.
• NEVER leave child unattended.
• Avoid serious injury from falling or sliding out. ALWAYS use safety harness.
• When making adjustments to the product, ALWAYS ENSURE that all parts of a child's body are clear of any moving parts of the product.
• Care must be taken when folding and unfolding the product to prevent finger entrapment.
• DO NOT carry additional children, goods or accessories in or on this product except as recommended in the manufacturer's instructions.
• DO NOT hang items on handle bar or place them on the canopy, as they can tip product over and injure child.
• DO NOT OVERLOAD STORAGE BAG. MAXIMUM 2.3 lbs. (1 kg).
• This product may become unstable if a parcel bag, other than the one recommended is used.
• DO NOT overload the cup holder. MAXIMUM weight for the cup holder is 1lb. (0.45 kg). Excessive weight may cause product to tip over.
• DO NOT place hot liquids in the cup holder. Spills can burn your child.
• Do not carry or roll stroller on stairs or escalators with child in it.
• Do not use the stroller if any part is lost or damaged.
• DO NOT allow child to stand while product is in motion.
• To avoid accidental rolling, always lock brakes when product is not being used.

Care and Maintenance

• Clean minor stains on fabric with cold water and mild soap.
• Clean plastic and metal surfaces with a soft damp cloth. Air dry.
• Do not use abrasive cleaners or solvents. Do not use bleach.
• Check seat pad harness and crotch straps weekly to ensure they are properly secured to frame.

Parts List

IMPORTANT! Before assembly, inspect this product for damaged hardware, loose joints or missing parts. Never use if any parts are missing or broken.

Assembly Instructions

Step 1: Assemble the Wagon

Follow the diagrams to assemble the main frame. This involves connecting frame pieces and securing them.

Diagram Description: Shows two frame pieces being connected, with arrows indicating the direction of assembly. A close-up shows a latch mechanism being engaged.

Step 2: Unfold the Wagon Frame

Unfold the wagon frame from its collapsed state. Ensure all locking mechanisms are engaged.

Diagram Description: Shows the central frame structure being pulled upwards and outwards to unfold. Arrows indicate the motion.

Step 3: Attach Wheels

Attach the front and rear wheels to the designated points on the frame. Ensure they click into place.

Diagram Description: Shows a wheel (labeled 3) being pushed onto an axle, with an indicator 'x2' suggesting this is done for two wheels. Another diagram shows a rear wheel (labeled 4) being attached similarly, also with 'x2'.

Step 4: Install Seat Pad and Harness

Place the seat pad (labeled 2) into the wagon and secure the safety harness. Adjust the harness for a snug fit.

Diagram Description: Shows the seat pad being placed inside the wagon. A close-up shows the harness buckles being connected and tightened. Text indicates 'Tighten' and 'Loosen' for the harness straps.

Safety Reminder: Avoid serious injury from falling or sliding out. ALWAYS use safety harness.

Step 5: Attach Handle

Attach the handle to the wagon frame. The handle may be adjustable.

Diagram Description: Shows the handle assembly being inserted into the wagon frame. Multiple circular insets show the handle's articulation and adjustment points.

Step 6: Attach Cup Holder

Attach the cup holder (labeled 6) to the designated spot on the wagon.

Diagram Description: Shows the cup holder being clipped onto the side of the wagon frame.

Step 7: Attach Canopy

Attach the canopy (labeled 5) to the top of the wagon frame using the provided clips.

Diagram Description: Shows the canopy being placed over the frame and secured with clips at four points ('x4').

Handle Usage

Instructions for extending and retracting the handle.

Diagram Description: Shows the handle being pulled up, rotated, and then extended. Another sequence shows the handle being collapsed and secured.

Handle Storage

Instructions for folding and storing the handle.

Diagram Description: Shows the handle being folded and tucked away, with specific connection points highlighted.

Locking the Wheels

Instructions on how to lock the wheels for stability.

Diagram Description: Shows a hand rotating a mechanism on the wheel assembly to lock it.

Locking the Brakes

Instructions on how to engage the brakes.

Diagram Description: Shows a foot pressing down on a brake pedal to engage it.

Unlocking the Wheels

Instructions on how to unlock the wheels.

Diagram Description: Shows a hand operating a lever or mechanism to release the wheel lock.

Unlocking the Brakes

Instructions on how to disengage the brakes.

Diagram Description: Shows a foot lifting a brake pedal to release it.

Remove the Wheels

Instructions for removing the wheels.

Diagram Description: Shows how to detach the wheels from the wagon frame, indicating a release mechanism.

Fold the Wagon

Step-by-step instructions for folding the wagon.

Diagram Description: Shows the sequence of actions to collapse the wagon, including disengaging locks, folding the frame, and securing the folded unit.