Support for OptiPlex 3090 Ultra | ation | Dell US
Specs DELL OptiPlex 3090 Intel Core™ i5 i5-1145G7 8 GB DDR4-SDRAM 256 GB SSD Windows 10 Pro UFF Mini PC Black (F75MY)
OptiPlex 3090 Ultra All-in-One Bundle Setup and Specifications Regulatory Model: D13U Regulatory Type: D13U003 June 2021 Rev. A00 Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2021 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners. Contents Chapter 1: Set up your OptiPlex 3090 Ultra All-in-One Bundle....................................................... 4 Installing the device............................................................................................................................................................ 4 Stand tilt, pivot, and swivel images............................................................................................................................... 12 Chapter 2: Powering the system.................................................................................................. 14 Chapter 3: Dell power button sync............................................................................................... 15 Chapter 4: Create a USB recovery drive for Windows...................................................................16 Chapter 5: Views of OptiPlex 3090 Ultra All-in-One Bundle..........................................................17 Back view............................................................................................................................................................................. 17 Bottom view........................................................................................................................................................................ 18 Front view............................................................................................................................................................................18 Left and right view............................................................................................................................................................20 Service tag location.......................................................................................................................................................... 20 Chapter 6: Specifications of OptiPlex 3090 Ultra All-in-One Bundle.............................................21 External ports and connectors........................................................................................................................................21 Dimensions and weight.................................................................................................................................................... 22 Display settings and operations..................................................................................................................................... 22 Chapter 7: Getting help............................................................................................................... 23 Contacting Dell...................................................................................................................................................................23 Contents 3 1 Set up your OptiPlex 3090 Ultra All-in-One Bundle Installing the device 1. Align and insert the slots on the stand into the tab on the stand base. 2. Lift and tilt the stand base. 3. Tighten the captive screw to secure the stand to the base. 4. Write the service tag number of the OptiPlex device in the blank space provided in the service tag of the monitor. 4 Set up your OptiPlex 3090 Ultra All-in-One Bundle 5. Open the packaging from one side, to install the stand to the monitor. 6. Align and insert the hooks on the mounting bracket on the stand into the slots on the monitor, until you hear a click. 7. Remove the monitor along with the stands from the packaging box. Set up your OptiPlex 3090 Ultra All-in-One Bundle 5 8. Connect the USB Type-C cable of the OptiPlex device to the USB Type-C port on the monitor. 6 Set up your OptiPlex 3090 Ultra All-in-One Bundle 9. Connect the keyboard cable, mouse cable, and network cable to the monitor. Set up your OptiPlex 3090 Ultra All-in-One Bundle 7 10. Connect the monitor power cord to the power port. 8 Set up your OptiPlex 3090 Ultra All-in-One Bundle 11. Power On the computer. NOTE: To enable the Dell power button sync between the monitor and the computer, press the power button on the monitor first and then press the power button on the computer. Set up your OptiPlex 3090 Ultra All-in-One Bundle 9 NOTE: When connecting the OptiPlex device and the monitor for the next time, press the monitor power button, both the monitor and computer will turn On. 10 Set up your OptiPlex 3090 Ultra All-in-One Bundle NOTE: For more information on Dell power button sync feature, see Dell power button sync. 12. Lock the device and the stand cover. Set up your OptiPlex 3090 Ultra All-in-One Bundle 11 Stand tilt, pivot, and swivel images Monitor rotate: Monitor tilt: 12 Set up your OptiPlex 3090 Ultra All-in-One Bundle Monitor swivel: Set up your OptiPlex 3090 Ultra All-in-One Bundle 13 2 Powering the system This system can be powered using a 65 W adapter (4.5 mm input power source) or through the USB Type-C cable connected to a display capable of providing power delivery of 65 W or greater. During normal operation, when the device is connected with a single power source (primary power source), connecting a second power source and disconnecting the primary power source will shut down the device. However, if the secondary power source is disconnected while the primary power source is connected, the system continues to operate normally. When the device is powered with both the power sources--AC adapter and USB Type-C cable, the AC adapter is the primary power source and USB Type-C is the secondary power source. Disconnecting the AC adapter will shut down the system. If the secondary power source is disconnected, the system continues to operate normally. NOTE: Hotswap between the AC adapter and USB Type-C power source is not supported. Table 1. Powering the system Primary Power Source Secondary power source connected AC Adapter Rear Type-C AC Adapter Rear Type-C Rear Type-C AC Adapter Rear Type-C AC Adapter Power source disconnected Operation AC Adapter Rear Type-C AC Adapter Rear Type-C Shut down Normal operation Normal operation Shut down 14 Powering the system 3 Dell power button sync The C-series monitors are enabled with Dell power button sync feature to control computer power state from monitor power button. This feature is compatible with Dell OptiPlex 3090 Ultra platform, and is only supported over USB Type-C interface. For the first time, the user needs to establish a sync between the computer and the Dell power button sync enabled monitor by powering on the monitor first and then the computer. Connecting the monitor and the computer for Dell power button sync for the first time Please follow the instructions below: 1. Ensure the computer and the monitor is switched off. 2. Press the power button on the monitor to turn on the monitor. 3. Connect the USB Type-C cable from the computer to the monitor. 4. Both the monitor and the computer will turn on momentarily. After a while (approximately 6 seconds), both the computer and the monitor will turn off. 5. When connecting the computer and the monitor for the next time, press either the monitor or the computer power button, both the monitor and computer will turn On. 6. The computer power state will automatically contract and sync with the monitor. Dell power button sync 15 4 Create a USB recovery drive for Windows Create a recovery drive to troubleshoot and fix problems that may occur with Windows. An empty USB flash drive with a minimum capacity of 16 GB is required to create the recovery drive. NOTE: This process may take up to an hour to complete. NOTE: The following steps may vary depending on the version of Windows installed. Refer to the Microsoft support site for latest instructions. 1. Connect the USB flash drive to your computer. 2. In Windows search, type Recovery. 3. In the search results, click Create a recovery drive. The User Account Control window is displayed. 4. Click Yes to continue. The Recovery Drive window is displayed. 5. Select Back up system files to the recovery drive and click Next. 6. Select the USB flash drive and click Next. A message appears, indicating that all data in the USB flash drive will be deleted. 7. Click Create. 8. Click Finish. For more information about reinstalling Windows using the USB recovery drive, see the Troubleshooting section of your product's Service Manual at www.dell.com/support/manuals. 16 Create a USB recovery drive for Windows 5 Views of OptiPlex 3090 Ultra All-in-One Bundle Back view 1. Monitor 3. Power button status light 5. Joystick 2. Height Adjustable Stand 4. Power button Views of OptiPlex 3090 Ultra All-in-One Bundle 17 Bottom view 1. Security lock slot 3. HDMI port 5. USB Type-C upstream/DisplayPort 7. USB-B upstream port 9. RJ-45 connector 11. Headphone jack Front view 2. Power port connector 4. DisplayPort in 6. DisplayPort out 8. Two super speed USB 5 Gbps (USB 3.2 Gen1) 10. Super speed USB 5 Gbps (USB 3.2 Gen1) 12. USB Type-C downstream port 1. Webcam 3. Power LED indicator Webcam: 2. Display 4. In-built speakers 18 Views of OptiPlex 3090 Ultra All-in-One Bundle 1. Microphones 3. Webcam lens Front controls: 2. IR LED 4. Webcam LED indicator 1. Teams button and LED 3. Volume down and LED 5. Microphone mute and LED 2. Hookswitch and LED 4. Volume up and LED Views of OptiPlex 3090 Ultra All-in-One Bundle 19 Left and right view 1. Power button 3. Security screw hole to secure stand cover 5. Headset/Universal audio jack 7. USB 3.2 Gen 2 Type-A port with PowerShare Service tag location 2. Stand release button 4. Service tag label 6. USB 3.2 Gen 2 Type-A port 1. Service tag location of the computer 2. Service tag location of the monitor 20 Views of OptiPlex 3090 Ultra All-in-One Bundle 6 Specifications of OptiPlex 3090 Ultra All-inOne Bundle External ports and connectors The following table lists the external ports and connectors of your OptiPlex 3090 Ultra All-in-One Bundle. Table 2. External ports Description Network port Values One RJ-45 Ethernet port USB ports Audio port One USB Type-C upstream/DisplayPort (bottom) One USB-B upstream port (bottom) Three super speed USB 5 Gbps (USB 3.2 Gen1) (bottom) One USB Type-C downstream port (bottom) One USB 3.2 Gen 2 Type-A port (right) One USB 3.2 Gen 2 Type-A port with PowerShare (right) One Headset/Universal audio jack One Headphone jack Video port HDMI port DisplayPort in DisplayPort out Power button Power button on the monitor Power button on the computer Power-adapter port DC-in port Security-cable slot One Security screw hole to secure stand cover One Monitor security lock slot Status LED lights Others Power button status light (back) Power LED indicator (front) Teams button and LED (front) Hookswitch and LED (front) Volume down and LED (front) Volume up and LED (front) Microphone mute and LED (front) Joystick (back) Webcam (front) Stand release button (left) Service tag label on the computer (right) Service tag label on the monitor (back) NOTE: For more information about the ports and connectors of OptiPlex 3090 Ultra see the Views and Specifications section of your product's Setup and specifications guide at www.dell.com/support/manuals. Specifications of OptiPlex 3090 Ultra All-in-One Bundle 21 Dimensions and weight The following table lists the height, width, depth, and weight of your OptiPlex 3090 Ultra All-in-One Bundle. Table 3. Dimensions and weight Description Height Values Minimum: 364.00 mm (14.33 in.) Maximum: 514.00 mm (20.24 in.) NOTE: The Height Adjustable Stand is height adjustable. Width Depth Weight NOTE: The weight of your computer depends on the configuration ordered and manufacturing variability. 538.40 mm (21.19 in.) 185.00 mm (7.28 in.) Minimum: 7.60 kg (16.75 lb) Maximum: 7.80 kg (17.19 lb) Display settings and operations For more information in display settings and operations, see the user guide Dell-C2422HE. 22 Specifications of OptiPlex 3090 Ultra All-in-One Bundle 7 Getting help Contacting Dell NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: 1. Go to Dell.com/support. 2. Select your support category. 3. Verify your country or region in the Choose a Country/Region drop-down list at the bottom of the page. 4. Select the appropriate service or support link based on your need. Getting help 23Antenna House PDF Output Library 7.1.1629