Airthereal Pristine Pro6H Reverse Osmosis Water Purifier User Manual

Safety Instructions

IMPORTANT SAFE GUARDS: To avoid the risk of serious injury when using your Reverse Osmosis Water Purifier, basic safety precautions must be followed, including but not limited to the following.

• All contents in this chapter are related to safety, users must comply with it.
• To protect against electric shock, do not place the power adapter, cord, base unit, or electronic module in water or other liquids.
• Keep out of reach of children. Do not let children operate the machine.
• Do not operate any appliance with a damaged electrical cord or plug or after the appliance malfunctions or has been dropped or damaged in any manner. If the power adapter cord is damaged, it must be replaced.
• Do not try to repair the machine yourself. If you have any problems, please contact Airthereal customer service for help.
• Use only factory-authorized replacement parts. The use of unauthorized replacement parts may degrade both the safety and the performance of this product and will void the limited warranty.
• The appliance must be dry before connecting to electrical power and be dry and free of leaks during operation.
• Avoid installing under direct sunlight and outdoor places.
• Do not expose this appliance to an environment below 32°F.
• Please make sure the temperature of the water source is 41-100°F.
• Do not store flammable items near the machine.
• When the machine will be inactive for more than 7 days, please empty the water tank and unplug the power supply.
• Regularly inspect product for water leaks as water leaks can cause property damage.
• Please only use accessories and filter cartridges from AIRTHEREAL.
• Unplug from the electrical outlet before cleaning or performing routine maintenance (i.e. replacing the filter cartridge).

Specifications

Components

The main components of the Airthereal Pristine Pro6H Water Purifier are:

• Water Tank Cover: The top lid of the unit.
• Raw Water Tank: Where the unfiltered water is placed.
• LED Display (Touch Control): The interactive control panel and display screen.
• Water Nozzle: Dispenses the purified water.
• Cup Rest: Supports cups placed under the nozzle.
• Drip Tray: Collects any drips from the nozzle.

Getting Started

Setting up

1. Please wash the water tank before first use.
2. Fill the water to the MAX volume line on the water tank.
3. Place the machine on a flat and stable surface that is within reach of a power outlet.
4. Ensure the filter is installed securely in its designated spot. (The filter is pre-installed before delivery).
5. Plug into the power outlet and turn on the switch behind the machine. The LCD display will illuminate.
6. Each time the power is switched on, the machine automatically enters the backflushing mode. The control panel cannot be operated during this time.
7. After backflushing, empty the water tank and long press the [Drain Button] to drain the water in the inner part of the machine until you hear the Water shortage alarm. This concludes one cycle of cleaning.
8. Repeat steps 2-7 at least 5-6 times before using or drinking any water.

Display Icons:

• Backflushing: When powered on, the [Flush Icon] will illuminate, and then the machine enters the water making mode.
• Water dispensing: The [Water Drop Icon] will illuminate until finished.

Note: When using the machine for the first time, during backflushing and water dispensing, the [Water Drop Icon] will illuminate, which is normal. The light will disappear after water dispensing is complete.

Function

The control panel features an LED Display and Touch controls.

Touch Controls:

• Water Making: Press to start or stop water making.
  Note: The machine automatically enters child lock mode after finishing water dispensing if there is no operation for more than 30 seconds. The child lock button will light up.
• Child Lock: Press to enter and release the child lock.
• Volume: Press to choose the volume of water. Options are 4/8/16/32 OZ.
• Temperature: Press to choose the dispensed water temperature. Options are: water temp in tank, 113°F, 158°F, 185°F, 212°F.

The setting function is consistent with the following table:

LED Display Indicators:

NOTE: EACH TIME THE POWER IS SWITCHED ON, YOU MUST DISPENSE A CUP OF WATER UNTIL THE SETTING BUTTON ILLUMINATES BEFORE YOU CAN ADJUST THE SETTING.

Maintenance

Filter Lifespans

The lifespan of the filters is estimated as follows:

• RO (Reverse Osmosis) Membrane Filter: [RO Filter Icon] need to replace the filter
• PCB (Pleated PP Membrane & Activated Carbon Block) Filter: [PCB Filter Icon] need to replace the filter

Note:

1. The filter lifespan is based on the power-on time of the whole machine or the time the machine is actively purifying water. Whichever time threshold is reached first will cause the filter reset indicator to illuminate.
2. The actual lifetime of the filters may differ depending on the input water quality, season, and how long the machine is powered on. The figures above are just an estimate. Your results may vary.

Filter replacement

1. Turn off the power and remove the raw water tank.
2. Open the buckle and pull the filter out.
3. Reinstall the new filter, then pull the buckle down to secure it.
4. Fill with raw water.
5. Power on and press the [Settings Button] for 5s to reset the filter (if an indicator alerts you to replace the filter).
6. Press the [Settings Button] for 5s to enter the settings. Press the [Flush Button] to select which filter needs to be reset, then press the [Settings Button] for 3s to reset. After reset, press the [Settings Button] for 3s to exit the settings (this applies if an indicator has not alerted you, but the filter needs replacement).

Automatic backflushing

The system automatically enters flushing mode under the following circumstances:

• For the first time using: When powered on, the system will automatically switch to auto-flushing mode and start back-flushing for 20 seconds.
• Every time before water making: The system will be forced to backflush for 20 seconds before a filtration cycle starts.
• For restored power: When the power is restored from an outage, the system will be forced to auto backflush for 20 seconds.
• Manual backflushing: Press the [Flush Button] to trigger the 20-second backflushing.

How to clean your water purifier

1. Please regularly wipe the exterior with a soft towel. Do not wipe the surface with chemical cleaners as this may damage the surface.
2. Do not rinse the product with water as it may cause water accumulation that is prone to bacteria and odors.
3. Please clean the water tank regularly to keep the tank clean and hygienic. Dirty water in the tank may cause damage to seals and other components.
4. If you need to stop using this machine for a long time (more than 7 days), please drain the water tank and unplug from the power supply. When using the water purifier again, you must clean the unit according to the "Product Instructions" above before drinking normally.

Troubleshooting

Error Codes

Limited Warranty

Airthereal provides a 1-year warranty. For more information, please visit: www.airthereal.com/warranty

What's covered?

Defects due to faulty materials and/or workmanship of the product.

What's not covered?

1. Damage caused by the owner when attempting to fix or alter the product by himself or herself.
2. Damage caused by misuse, abuse, neglect, alterations, or unauthorized repair.
3. Natural depreciation.

Warranty Period

Warranty becomes effective from the date of original purchase and will last for 1 year.

Who's covered?

This limited warranty is only effective for the original purchaser. It is non-transferable.

How to request warranty services?

To obtain the benefit of this warranty, please email support@airthereal.com. Airthereal's customer service team will address your issue as soon as possible!