Heineken Signum LED Sign
Item: 20191075
Signum Assembly Instructions
Step 01: Unscrew both screws at the bottom side.
Step 02: Take off the top cap.
Step 03: (Re)place the battery and attach the battery connector inside the Signum.
Step 04: Place the cap back on top. Make sure there are 2 rubber rings placed in between.
Step 05: Screw both screws back at the bottom sides.
Step 06: Push the spindle with the rubber ring through the bottom hole. Orientation: The logo must face the customer, and the arrow must face the bartender.
Step 07: Screw the Signum on top of the tap and the handle, with the flat rubber ring on top of the Signum.
Signum LED Sign - Installation and Usage
Front View
The Heineken Signum LED Sign features the "Star Quality Heineken Draught" logo. It is an interactive LED sign; the animation will start when the tap handle is pulled down.
Back View and Mounting
The back of the sign includes components for mounting:
- Wall Mount: Use the provided brackets on the back side of the sign.
- Ceiling Mount: Use the 2 hanging chains for mounting at the ceiling.
Note: Ensure you use the correct materials suitable for the type of wall or ceiling.
Connection and Power
- Connect the 12V power cable from the transformer to the 12V power cable on the back side of the sign.
- Plug the transformer into a wall socket.
- Refer to the Signum assembly instructions for mounting the Signum on the tap.
Specifications
| Specification | Details |
|---|---|
| Input Voltage | 100-240V AC / 50-60 Hz |
| Output Voltage | 12V / 4 A DC |
| Weight | 4.1 Kg |
| Product Dimensions | W=540mm, H=540mm, D=60mm |
| Operating Temperature | 0°C ~ 40°C / 32°F ~ 104°F |
Usage and Safety Notes
- Only use the supplied 110 / 240V - 50-60 Hz, 12V/4000mA transformer.
- Always switch off the sign when cleaning.
- For indoor use only.
- Use in dry locations only.
- Never place in direct sunlight or nearby heaters/ovens or other heating equipment.
- The power cable must not be modified or damaged, as this could result in a dangerous situation.
- Only use the supplied battery for the Signum.
FCC Information
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This device complies with Part 15 of the FCC Rules, and operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Compliance Marks: CE