DA&T Audio System Connection Diagrams
This document provides visual guides and textual descriptions for connecting various DA&T audio equipment, including integrated amplifiers, power amplifiers, and pre-amplifiers.
K-221+K-200 Bi-Amp Connection Diagram
This section details a bi-amplification setup using the DA&T K-221 Integrated Amplifier and the DA&T K-200 Stereo Power Amplifier to drive two speakers.
Components:
- DA&T K-221 Integrated Amplifier (with DAC)
- DA&T K-200 Stereo Power Amplifier
- Two Speakers
Connection Description:
In this bi-amp configuration, the K-221 Integrated Amplifier acts as the primary control unit. It outputs audio signals to the speakers via its dedicated SPEAKER OUT terminals (labeled RIGHT and LEFT). Simultaneously, it sends a signal to the K-200 Stereo Power Amplifier. The K-200 then amplifies this signal and outputs it to the speakers via its own SPEAKER OUT terminals. This allows for separate amplification of different frequency ranges within the speakers. The diagram shows red lines connecting the K-221's SPEAKER OUT to the positive terminals of the speakers and the K-200's SPEAKER OUT to the negative terminals of the speakers. The K-221 features inputs such as USB, ANALOG (OPTICAL, COAXIAL), and TRIG OUT. The K-200 features XLR IN and RCA IN for receiving audio signals, along with AC IN for power and a FUSE holder.
K-200+Q-J Pre-Amplifier Connection Diagram
This section illustrates the connection between the DA&T Q-j Pre-Amplifier and the DA&T K-200 Stereo Power Amplifier, driving two speakers.
Components:
- DA&T Q-j Pre-Amplifier
- DA&T K-200 Stereo Power Amplifier
- Two Speakers
Connection Description:
This setup utilizes the Q-j Pre-Amplifier to control audio sources and provide a line-level signal to the K-200 Stereo Power Amplifier. Red cables connect the output of the Q-j Pre-Amplifier (likely RCA or XLR, with the diagram showing connections to the K-200's RCA IN ports) to the input of the K-200 Power Amplifier. The K-200 then amplifies the signal and sends it to the two connected speakers via its SPEAKER OUT terminals (LEFT and RIGHT). Both units have AC IN ports for power and FUSE holders. The Q-j Pre-Amplifier also shows TRIG IN/OUT connections, suggesting integration with other components.
K-200 Stereo Power Amplifier Connection to Surround Amplifier
This section describes how the DA&T K-200 Stereo Power Amplifier can be integrated with an external surround amplifier to power front speakers.
Components:
- DA&T K-200 Stereo Power Amplifier
- External Surround Amplifier (source of pre-outs)
- Two Speakers
Connection Description:
In this configuration, the DA&T K-200 Stereo Power Amplifier functions as a dedicated stereo power amplifier for the front left and right channels. An external surround amplifier (not pictured, but implied by the "Surround Amplifier" label and PREOUT connections) provides the audio signal via its pre-amplifier outputs (PREOUT L and R). Red cables connect these pre-outs from the surround amplifier to the XLR IN ports on the DA&T K-200. The K-200 then amplifies these signals and delivers them to the two connected speakers through its SPEAKER OUT terminals (LEFT and RIGHT). The K-200 is powered via its AC IN port and protected by a FUSE. The diagram also shows RCU IN on the K-200, which might be for remote control.
