Zikr Ring Flex Pro User Manual

Introduction

This section introduces the Zikr Ring Flex Pro and its components.

Components of the Zikr Ring:

• 1 Display screen: Shows information and status.
• 2 Button: Used for various operations like waking the screen, counting, and navigating.
• 3 Ring base change switch: Allows for changing the ring base.
• 4 Charging port: For connecting the ring to the charger.

Diagram Description: The Zikr Ring is shown from the front and side. The front view highlights the display screen (1) and the button (2). The side view shows the charging port (4) and the ring base change switch (3).

Charging

Follow these steps to charge your Zikr Ring:

1. Ensure the charging case is fully charged.
2. Align the Zikr Ring's charging port with the corresponding contact on the charging case and place the ring inside.
3. When charging begins, the display screen will show a charging animation.
4. The current battery level is displayed when the Zikr Ring is removed from the case.
5. The charging animation stops when charging is complete.

Note: Before charging, check and clean any water stains from the Zikr Ring's charging port.

Diagram Description: An illustration shows the Zikr Ring being placed into an open charging case.

Basic Operations

Button Operations:

1. Short Press:
   • Wakes up the screen and displays the home screen. (Before app binding, this is the tasbih counter; after binding, it shows the time).
   • When the time interface is displayed, a short press enters the tasbih counter.
   • When the Bluetooth address is displayed, a short press flips the screen display direction.
2. Long Press:
   • When the main screen or tasbih counter interface is displayed, a long press starts a new count.
   • When the tasbih counter is zero, a long press displays the Bluetooth address.

Note: Tasbih counts are updated to the app only after resetting the counts to zero.

Interface Display

The Zikr Ring's display shows the following information:

• 1 Customized Tasbih icon: Indicates custom tasbih settings.
• 2 Battery: Shows the current battery level.
• 3 Bluetooth connection status: Indicates if the ring is connected via Bluetooth.
• 4 Time: Displays the current time (requires app binding).
• 5 Tasbih counter: Shows the current count of tasbih.

Diagram Description: A digital display shows various icons and numbers. Number 1 points to a custom icon, 2 to a battery symbol, 3 to Bluetooth signal bars, 4 to the time "13:36", and 5 to the tasbih count "65000".

Connect to iQIBLA Life APP

Bind Zikr Ring:

1. Use your smartphone to scan the QR code (excluded) to enter Google Play or the App Store and download the iQIBLA Life APP.
2. Open the APP to register a new account and fill in your personal information.
3. Click the iQibla logo at the bottom of the new device interface and choose "Zikr Ring Flex".
4. Select the device corresponding to the ring's Bluetooth address.
5. Complete the binding of the Zikr Ring.

Note: Your ring can only be bound to one account at a time. To bind it to another account, you must first unbind it from the current account.

Unbind Zikr Ring

To unbind your Zikr Ring from the app:

1. Ensure you are connected to the device you wish to unbind.
2. Navigate to your ring's page in the application and go to settings at the bottom of the menu.
3. Select "Unbind".
4. Complete the unbinding process by entering the verification number.

Basic Functions

Tasbih Counter:

1. Tasbih Count: After the screen is turned on, use the button to perform Tasbih.
2. Re-counting: A long press of the button for 3 seconds will restart the counting and save the last tasbih count record.
3. Synchronization: Open the APP. The Zikr Ring will automatically synchronize tasbih counting data to the APP after you reset the ring's counter.

Adjusting Prayer Times

1. You can manually modify prayer times and reminders based on your region.
2. You can also customize prayer reminders via the Azan feature in the APP.

Customize Tasbih

From the iQIBLA Life APP, you can customize your Tasbih by setting your own goals.

A) Tasbih

1. Monitor the tasbih data displayed on the ring via the APP.
2. Customize tasbih notifications with specific numbers and their multiples.

B) Customized Tasbih

1. Go to the iQIBLA Life APP and set your Tasbih target from the "Custom Tasbih" section.
2. Choose the type of Zikr or set your own Zikr content.
3. Set your target goal and press start.
4. Begin using the ring to count. Once the number reaches your target, the ring vibrates, and your Zikr will be saved in the Custom Tasbih records in the APP.

Find Zikr Ring

Click "Find Ring" on the APP's device interface. The Zikr Ring will vibrate for 10 seconds. Press the ring's button to stop the vibration.

Prayer Reminder

Turn on "Prayer Reminder" in the APP and synchronize. The Zikr Ring will remind you for the five daily prayers.

Screen Sleep

You can customize the ring's screen sleep duration from 10 seconds to 60 seconds to suit your usage.

Tasbih Reminder

Turn on "Tasbih Reminder" in the APP and synchronize. The Zikr Ring will remind you to perform Tasbih.

Screen Flip

After connecting to the APP, set the screen display direction according to your wearing habits. You can also flip the screen by short-pressing the ring's button while the Bluetooth address is displayed.

Prayer Calculation Method

You can choose the prayer calculation method based on your region or manually adjust prayer calculation angles for your region. You can also select the Asr Juristic Method based on the juristic school of your region.

Multi-language Switching

In the device settings, you can switch and save the device language. The device supports the following languages: Arabic, English, French, German, Persian, Turkish, Simplified Chinese, Bahasa Indonesia, Gujarati, and Urdu.

Different Sizes

The Zikr Ring Flex comes with two different sizes in one box: a small size (18mm, 20mm) and a big size (20mm, 22mm). Choose the size that best fits your finger.

Diagram Description: Illustrations show the ring components and how to attach the base. Step 1 shows the ring and base separately. Step 2 shows the base attached to the ring, with the button facing the iQibla logo.

FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.