CHCNAV HCE600 GNSS Data Controller

Introduction

This user guide describes in detail how to install, configure, and use the HCE600. The operation process is clear and simple, enabling users to quickly and accurately become familiar with this controller.

Experience requirements

To use the HCE600 effectively, CHCNAV recommends reading this user guide carefully before use. If you are unfamiliar with HCE600 principles, please contact support@chcnav.com for more details.

Disclaimer

Before using this product, please read the user guide carefully. CHCNAV is not responsible for any damage caused by operation without following the requirements of this document or misuse due to lack of understanding. CHCNAV strives to continuously improve product functions and performance, enhance service quality, and reserves the right to change or optimize the manual's content, informing users via upgrade releases. Please pay attention to the latest information on the official website (www.chcnav.com).

Your suggestions

If you have questions, contact your local supplier or send an email to support@chcanv.com.

1. Introduction

1.1 Introduction

The CHCNAV HCE600 is a high-performance intelligent handheld terminal developed by Shanghai Huace Navigation Technology LTD. It incorporates powerful navigation features with improved sensitivity, delivering more accurate and faster location services. Powered by Android 10.0 OS with a 2.0GHz quad-core processor, it offers extended battery life.

1.2 Battery Notes

• Do not allow the battery to sit idle for too long, either in the product or in storage. If the battery is 6 months old, check its charge state or dispose of it properly.
• Lithium-ion batteries typically last two to three years or 300 to 500 charge cycles. A full charge cycle includes a complete charge, a complete discharge, and then a complete charge.
• Rechargeable lithium-ion batteries have a limited lifespan and gradually lose their ability to hold a charge; this aging process is unchangeable. As capacity decreases, service life (run time) is reduced.
• The lithium-ion battery slowly discharges automatically when not in use or idle. Check the battery charge status frequently or refer to the instruction manual for charging information.
• Observe and record a battery's runtime when new and fully charged. Battery runtime will vary based on product configuration and application.
• Check the battery charge status regularly. Battery charge time increases significantly as runtime drops below approximately 80% of the original.
• If the battery is left idle or unused for a long period, check its charge level. If it has no charge left, do not attempt to charge or use it; replace it with a new battery and store the old one separately.
• Battery storage temperature: 5°C to 20°C (41°F to 68°F).
• Note: Replacing batteries with the wrong type poses a risk of explosion. Dispose of used batteries according to instructions.

1.3 Adapter Notes

Products are shipped without adapters. If consumers use power adapters, they should purchase adapters that meet relevant safety standards or have obtained CCC certification.

2. Installation Guide

2.1 Appearance

The device is a handheld terminal featuring a large touchscreen display on the front, a numeric keypad below the screen, and buttons on the sides. The back has a textured grip and speaker grille. The NFC logo is visible on the back.

2.2 Install Micro SD, SIM card

The device uses a SIM/SD card tray with two slots: one for a SIM card and one for a microSD card (labeled "TF").

2.3 Battery charging

Charge the battery via the USB port using the original adapter. Do not use other brand adapters.

2.4 Button and function area display

The HCE600 device features one side button, one power button, and 23 main buttons on the keypad.

3. Telephone function

3.1 Make a phone call

Click the phone icon ?. Tap the number keys to enter the telephone number. Tap the call button ? to dial. Tap the end call button ? to end the call.

(Screen description: Dialer screen showing number '112' entered, with options to 'Create new contact', 'Add to a contact', and 'Send a message'.)

3.2 Contacts

Click 'Contacts' to open the contacts list. Click the '+' button to add a new contact.

(Screen description: Contacts screen displaying "No contacts in this account" and a '+' button for adding new contacts.)

3.3 SMS and MMS

Click the message icon ✉️ to open the message list. Click the text input field to type a message. Click the attachment icon ? to add photos or videos.

(Screen description: Messaging interface with recipient field, text message input area, and on-screen keyboard.)

4. Multimedia

4.1 Camera

You can turn on the camera to capture moments. The camera interface displays a preview of the scene, a circular shutter button (?), options to switch between 'Camera' and 'Video' modes, and other control icons.

• Click ? to switch the photo mode.
• Click ⚡ to switch the flash mode.
• Click ?️ to check photos or videos.
• Click ? to take a photo.
• Click Video to switch to video mode, then click ▶️ to start recording.

4.2 Gallery

Users can view photos and videos through the gallery.

View pictures and video

1. In the pull-up menu, click ?️.
2. Select the folder of images to view.
3. Click on an image or video to view it full screen.

Show slide

1. In the pull-up menu, click ?️.
2. Select the folder of images to view.
3. Click the slideshow icon ▶️ and select to broadcast the slideshow.

Edit photos

1. In the pull-up menu, click ?️.
2. Select the folder of pictures you want to view.
3. Select a picture, touch it, click the edit icon ✏️ to start editing.

Delete image

1. In the pull-up menu, click ?️.
2. Select the folder of pictures you want to view.
3. Select a picture, click the delete icon ?️, and then click 'Delete' to delete the picture.

Share pictures and videos

You can share pictures and videos via email ✉️, Bluetooth ?, and other methods.

4.3 Music

The controller has a built-in music player.

Add music

Copy music files to the controller via USB connection cable to a computer, download via the Internet, or copy via USB cable or Bluetooth connection.

Play music

1. In the pull-up menu, click the music icon ?.
2. Click the 'Song' button to select the song you want to play.
3. Go to the player interface and enjoy the music.

5. Troubleshooting

5.1 Abnormal power on

If the device enters Recovery mode (triggered by Power + 1 + 6 simultaneously), use the [Down Arrow] key ⬇️ on the keyboard to select 'Normal Boot' and press OK. After reboot, check if the side buttons function normally. If not, contact your local supplier.

(Screen description: A text-based menu shows "Select Boot Mode:" with options like [Recovery Mode], [Fastboot Model], [Normal Boot].)

(Image description: An image of the Android robot mascot is shown, indicating a boot mode.)

If Recovery Mode or Fastboot Mode is accidentally selected, press and hold the power button for 11 seconds to force a reboot.

5.2 Hang up

If the device freezes and touch operations are unresponsive, long-press the power button for 11 seconds to restart.

Product Specifications

Equipment parameters

Performance Parameters

Working environment

wireless connection

Equipment Remarks

Restrictions

❗ Restrictions:

• AT, BE, BG, HR, CY, CZ, DK, EE, FI, FR, DE, GR, HU, IE, IT, LV, LT, LU, MT, NL, PL, PT, RO, SK, SI, ES, SE, UK

The European version of the device is limited to indoor use in European communities using frequencies from 5150MHz-5350MHz to reduce the potential for interference.

Declaration

Equipment declaration: Shanghai Huace Navigation Technology Ltd. hereby affirms that the radio equipment model HCE600 complies with Directive 2014/53/EU. The full text of the EU conformity declaration is available on the official website: https://www.chcnav.com/.

FCC Compliance

1) FCC 15.19

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

2) FCC 15.21

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

3) FCC 15.105

For a Class B digital device or peripheral, the instructions furnished shall include the following or similar statement, placed in a prominent location in the manual:

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Specific Absorption Rate (SAR) information

This Smart Phone meets the government's requirements for exposure to radio waves. The guidelines are based on standards developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.

FCC RF Exposure Information and Statement

The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Smart handheld printer (FCC ID: SY4-B01015) has also been tested against this SAR limit. During product certification, the maximum SAR value reported according to this standard is less than 1.6W/kg when correctly worn on the vehicle body. This device was tested for typical body-worn operations with the back of the Smart Phone kept 0cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0cm separation distance between the user's body and the back of the Tablet PC. The use of belt clips, holsters, and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided. Very high volume, prolonged listening to a mobile phone can damage your hearing.