Westinghouse Built-in Microwave
WMB2522SC & WMB2522DSC
Dimension and installation guide
Wall Cabinet Installation
Diagram showing dimensions for installing the microwave in a wall cabinet. Key dimensions include 400mm width, 460mm height, and 596mm depth for the unit. The cabinet opening requires a minimum height of 500mm and a width of 600mm. A diagram on the right illustrates the internal cabinet space, indicating a 20mm packer set back from the front trim to avoid obstructing the front vent, with a minimum ventilation gap of 3.5mm below the trim and a minimum airflow gap of 200cm² at the front.
Under-bench Installation
Diagram illustrating dimensions for installing the microwave under a bench. Key dimensions for the unit are approximately 466mm height, 600mm width, and 596mm depth. The under-bench opening requires a minimum height of 466mm and a width of 600mm. A detailed view shows a 6mm packer set back 20mm from the front trim to avoid front vent obstruction, secured to the base of the cabinet, with a minimum ventilation gap of 3.5mm below the trim and a minimum airflow gap of 200cm² at the front.
Important Information
These dimensions are a guide only. All measurements are in millimetres (mm). For complete installation instructions, refer to the manual provided with the product.
Product Dimensions
| Product WxHxD (mm) | Flush mount cut-out WxHxD (mm) |
|---|---|
| 596 x 460 x 400 | 600 x 466 x 500 |
