Application Programming Interface (API) Reference Guide

Cisco TelePresence Codec SX20 API Reference Guide (CE9.0)

Cisco TelePresence SX Series - Command References - Cisco

Application Programming Interface (API) Reference Guide

Google Docs
Google Drive
Download [pdf]

File Info : application/pdf, 190 Pages, 5.05MB

codec-sx20-api-reference-guide-ce90

Cisco TelePresence SX20 Codec

Introduction

About the API

Software version CE9.0 APRIL 2017

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Application Programming Interface (API) Reference Guide
Cisco TelePresence SX20 Codec

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

What's in this guide?
The top menu bar and the entries in the table of contents are all hyperlinks, just click on them to go to the topic.
We recommend you visit our web site regularly for updated versions of the user documentation.
Go to: http://www.cisco.com/go/sx-docs
TA - ToC - Hidden text anchor

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Table of Contents
Introduction............................................................................ 3
About this guide....................................................................... 4 Downloading the user documentation.................................. 4
What's new in CE9.0................................................................ 5
About the API....................................................................... 10
API fundamentals................................................................... 11 Connecting to the API......................................................... 11 Password............................................................................. 11 SSH..................................................................................... 11 Telnet................................................................................... 11 HTTP/HTTPS....................................................................... 11 RS-232 / serial connection................................................. 12 User roles............................................................................ 12
API output.............................................................................. 13 The output modes............................................................... 13
Using the command line........................................................ 14 API commands.................................................................... 14 Other commands................................................................ 14 Command line shortcuts..................................................... 15 Searching............................................................................ 15 Value types and formats..................................................... 15
Commands............................................................................. 16
Configurations........................................................................ 16
Status..................................................................................... 16
Events.................................................................................... 17
Feedback mechanism............................................................ 18 Feedback expressions........................................................ 18 Terminal connections.......................................................... 19

Using HTTP............................................................................20 HTTP XMLAPI Authentication..............................................20 HTTP XMLAPI Session Authentication................................20 Getting status and configurations....................................... 21 Sending commands and configurations.............................. 21 Using HTTP POST............................................................... 21
Feedback from codec over HTTP..........................................22 Registering for feedback.....................................................22 Translating from terminal mode to XML..............................23
Dos and don'ts....................................................................... 24
xConfiguration commands................................................... 25 Description of the xConfiguration commands.......................26
xCommand commands........................................................ 84 Description of the xCommand commands............................85
xStatus commands............................................................ 129 Description of the xStatus commands................................. 130
Appendices........................................................................ 184 About startup scripts...........................................................185 The SystemTools commands...............................................186 About disconnect cause types............................................188 User documentation on the Cisco web site.........................189

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Chapter 1
Introduction

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

About this guide
This guide introduces you to the Application Programmer Interface (API) for the TC software in general, and serve as a reference guide for the command line commands for the following product: · Cisco TelePresence SX20 Codec
NOTE: This guide doesn't apply to Cisco Spark registered devices. To find more information on Cisco Spark room devices, visit: https://help.webex.com/ ·

xConfiguration

xCommand

Downloading the user documentation
You can download the user documentation from the Cisco web site, go to: http://www.cisco.com/go/sx-docs
Guidelines for how to find the documentation on the Cisco web site are included in the User documentation on the Cisco web site appendix.

xStatus

API Reference Guide
Appendices

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

What's new in CE9.0
This section provides an overview of the new and changed system settings, and the new features and improvements in the Cisco Collaboration Endpoint software version 9.0 (CE9.0) compared to CE8.3.
The list of new commands includes all changes from CE8.3 to CE9.0.
As CE software is based on TC7, the structure and main functionality remains the same as in TC software.
For more details, we recommend reading the Software release notes:
http://www.cisco.com/c/en/us/support/collaborationendpoints/telepresence-quick-set-series/ products-release-notes-list.html
It is important to consider the upgrade requirements of CE9 before upgrading; otherwise upgrading to CE9 can leave you with a non-functioning deployment that requires you to downgrade.

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

New features and improvements
Updated user interface
The user interfaces on the Touch 10, on screen, and on the integrated touch screen have been updated. The main menu items on the home screen have been replaced with more prominent activities.
Some of the setting have been removed from the Touch 10 advanced settings menu to align with the on-screen display menu.
Wakeup on motion detection
Wakeup on motion detection senses when a person walks into the conference room and the system wakes up automatically. You need to enable the following setting for this feature to work:
xConfiguration Standby WakeupOnMotionDetection
You can't manually place the system in standby when this feature is enabled.

Updated In-Room Control Editor The In-Room Control editor is updated with a new look, improved logic and usability for producing a control interface more efficiently. In addition, a new directional pad widget and an In-Room Control simulator is added.
Added language support We have added support for Potuguese (Portugal) to the on-screen display and Touch controller menus.
Other changes · Support for HTTPS client certificates has been added. · Unplugging the presentation cable instantly stops the
presentation sharing.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

System configuration changes in CE9.0
New configurations NetworkServices HTTPS Server MinimumTLSVersion NetworkServices HTTPS StrictTransportSecurity NetworkServices UPnP Mode
Configurations that are removed Audio Microphones PhantomVoltage
Configurations that are modified Cameras Camera [n] *
OLD: User role: ADMIN, USER NEW: User role: ADMIN, INTEGRATOR Conference MultiStream Mode OLD: Value space: Auto/Off NEW: Value space: Off UserInterface Language NEW: Portuguese added to value space
Configurations with the new INTERATOR user role A new user role - INTEGRATOR - is introduced in CE9.0. It has been added to the following configurations: Audio DefaultVolume Audio Input Line [n] * Audio Input Microphone [n] * Audio Microphones Mute Enabled Audio Output Line [n] * Audio SoundsAndAlerts * Cameras Camera [n] * Conference DefaultCall Rate Conference DoNotDisturb DefaultTimeout

xCommand

xStatus

API Reference Guide
Appendices

Peripherals Profile * SerialPort BaudRate SerialPort Mode Standby * SystemUnit Name Time Zone UserInterface OSD Output Video Input Connector [n] CameraControl CameraId Video Input Connector [n] CameraControl Mode Video Input Connector [n] InputSourceType Video Input Connector [n] Name Video Input Connector [n] PresentationSelection Video Input Connector [n] Quality Video Input Connector [n] Visibility Video Monitors Video Output Connector [n] CEC Mode Video Output Connector [n] MonitorRole Video Output Connector [n] Resolution Video Presentation DefaultPIPPosition Video Selfview Default * Video Selfview OnCall *
<path> * means that the change applies to all configurations starting with <path>.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xCommand changes in CE9.0
New commands Audio Microphones ToggleMute Audio Volume ToggleMute Audio Sound Play Audio Sound Stop SystemUnit SignInBanner Clear SystemUnit SignInBanner Get SystemUnit SignInBanner Set
Commands that are modified SystemUnit FactoryReset
NEW: Keep: LocalSetup, Network, Spark, Provisioning
xCommand with INTEGRATOR role Audio Microphones Mute Audio Microphones ToggleMute Audio Microphones Unmute Audio Sound Play Audio SoundsAndAlerts Ringtone List Audio SoundsAndAlerts Ringtone Play Audio Sound Stop Cameras AutoFocus Diagnostics Start Cameras AutoFocus Diagnostics Stop Cameras SpeakerTrack Diagnostics Start Peripherals Connect Peripherals List Standby Activate Standby Deactivate

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

xConfiguration

xCommand

xStatus

SystemUnit Boot UserInterface Extensions Clear UserInterface Extensions List UserInterface Extensions Widget SetValue UserInterface Extensions Widget UnsetValue UserInterface Message Alert Clear UserInterface Message Alert Display UserInterface Message Prompt Clear UserInterface Message Prompt Display UserInterface Message Prompt Response UserInterface Message TextLine Clear UserInterface Message TextLine Display UserInterface Presentation ExternalSource Add UserInterface Presentation ExternalSource List UserInterface Presentation ExternalSource Remove UserInterface Presentation ExternalSource RemoveAll UserInterface Presentation ExternalSource Select UserInterface Presentation ExternalSource State Set UserManagement User Passphrase Change Video Input SetMainVideoSource

API Reference Guide
Appendices

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xStatus changes in CE9.0
New statuses
Video Output Connector [n] ConnectedDevice CEC [n] Name
Video Output Connector [n] ConnectedDevice CEC [n] VendorId
Statuses that are modified
Diagnostics Message [n] Type
OLD: CAPFOperationState, CTLinstallation, CUCMVendorConfigurationFile, CallProtocolDualStackConfig, CallProtocolIPStackPlatformCompatibility, CallProtocolVcsProvisioningCompatibility, CameraId, CameraPairing, CameraSerial, CameraSoftwareVersion, CameraStatus, CamerasDetected, ConfigurationFile, DefaultCallProtocolRegistered, EthernetDuplexMatches, FanStatus, PresenterTrack, H320GatewayStatus, H323GatekeeperStatus, HasValidReleaseKey, IpCameraStatus, IPv4Assignment, IPv6Assignment, IPv6Mtu, ISDNLinkCompatibility, ISDNLinkIpStack, ITLinstallation, InvalidSIPTransportConfig, LockDown, RoomControl, MediaBlockingDetected, NetLinkStatus, NetSpeedAutoNegotiated, NetworkQuality, NTPStatus, OSDVideoOutput, OutputConnectorLocations, ProvisioningStatus, SIPEncryption, SIPListenPortAndOutboundMode, SIPProfileRegistration, SIPProfileType, SelectedVideoInputSourceConnected, SipIceAndAnatConflict, TCPMediaFallback, TemperatureCheck, TLSVerifyRequiredCerts, TouchPanelConnection, ControlSystemConnection, TurnBandwidth, UdpPortRangeViolation, UltrasoundSpeakerAvailability, ValidPasswords, VideoFromInternalCamera, VideoInputStability, SparkConnectivity, SpeakerTrackFrontPanelMountedCorrectly, SpeakerTrackMicrophoneConnection, SpeakerTrackVideoInputs, SpeakerTrackEthernetConnection, ANATOnVCS, ECReferenceDelay, AudioECRefDelay, AudioPairingNoise, AudioPairingRate, AudioPairingSNR, AudioPairingInterference, AudioPairingTokenDecode, AudioInternalSpeakerDisabled, AbnormalCallTermination, HasActiveCallProtocol, SipOrH323ButNotBothEnabled, PresentationSourceSelection, SoftwareUpgrade, PlatformSanity, ContactInfoMismatch, MicrophoneReinforcement
NEW: CAPFOperationState, CTLinstallation, CUCMVendorConfigurationFile, CallProtocolDualStackConfig, CallProtocolIPStackPlatformCompatibility, CallProtocolVcsProvisioningCompatibility, CameraId, CameraPairing, CameraSerial, CameraSoftwareVersion, CameraStatus, CamerasDetected, ConfigurationFile, DefaultCallProtocolRegistered, EthernetDuplexMatches, FanStatus, PresenterTrack, H320GatewayStatus, H323GatekeeperStatus, HasValidReleaseKey, IpCameraStatus, IPv4Assignment, IPv6Assignment, IPv6Mtu, ISDNLinkCompatibility, ISDNLinkIpStack, ITLinstallation, InvalidSIPTransportConfig, LockDown, RoomControl, MediaBlockingDetected, NetLinkStatus, NetSpeedAutoNegotiated, NetworkQuality, NTPStatus, OSDVideoOutput, OutputConnectorLocations, ProvisioningDeveloperOptions, ProvisioningStatus, SIPEncryption, SIPListenPortAndOutboundMode, SIPProfileRegistration,

SIPProfileType, SelectedVideoInputSourceConnected, SipIceAndAnatConflict, SIPListenPortAndRegistration, TCPMediaFallback, TemperatureCheck, TLSVerifyRequiredCerts, TouchPanelConnection, ControlSystemConnection, TurnBandwidth, UdpPortRangeViolation, UltrasoundSpeakerAvailability, ValidPasswords, VideoFromInternalCamera, VideoInputStability, VideoInputSignalQuality, SparkConnectivity, SpeakerTrackFrontPanelMountedCorrectly, SpeakerTrackMicrophoneConnection, SpeakerTrackVideoInputs, SpeakerTrackEthernetConnection, ANATOnVCS, ECReferenceDelay, AudioECRefDelay, AudioPairingNoise, AudioPairingRate, AudioPairingSNR, AudioPairingInterference, AudioPairingTokenDecode, AudioInternalSpeakerDisabled, AbnormalCallTermination, HasActiveCallProtocol, SipOrH323ButNotBothEnabled, PresentationSourceSelection, SoftwareUpgrade, PlatformSanity, ContactInfoMismatch, MicrophoneReinforcement, FirstTimeWizardNotCompleted, CaptivePortalDetected, MonitorDelay
xStatus with INTEGRATOR role
Audio Input Connectors Microphone[n] ConnectionStatus
Audio Microphones Mute
Audio Output Connectors Line[n] DelayMs
Audio Volume
Call[n] FacilityServiceId
Call[n] ReceiveCallRate
Call[n] TransmitCallRate
Cameras Camera[n] Capabilities Options
Cameras Camera[n] Connected
Cameras Camera[n] Flip
Cameras Camera[n] HardwareID
Cameras Camera[n] MacAddress
Cameras Camera[n] Manufacturer
Cameras Camera[n] Model
Cameras Camera[n] Position Focus
Cameras Camera[n] Position Pan
Cameras Camera[n] Position Tilt
Cameras Camera[n] Position Zoom

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

Cameras Camera[n] SerialNumber Cameras Camera[n] SoftwareID Cameras SpeakerTrack Availability Cameras SpeakerTrack Status Conference DoNotDisturb Conference Presentation CallId Conference Presentation LocalInstance[n] SendingMode Conference Presentation LocalInstance[n] Source Conference Presentation Mode Peripherals ConnectedDevice[n] HardwareInfo Peripherals ConnectedDevice[n] ID Peripherals ConnectedDevice[n] Name Peripherals ConnectedDevice[n] SoftwareInfo Peripherals ConnectedDevice[n] Status Peripherals ConnectedDevice[n] Type Peripherals ConnectedDevice[n] UpgradeStatus Standby State SystemUnit State NumberOfActiveCalls SystemUnit State NumberOfInProgressCalls Time SystemTime UserInterface Extensions Widget[n] Value UserInterface Extensions Widget[n] WidgetId Video ActiveSpeaker PIPPosition Video Input Connector[n] Connected Video Input Connector[n] SignalState Video Input Connector[n] SourceId Video Input Connector[n] Type Video Input Source[n] ConnectorId

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Video Input Source[n] FormatStatus Video Input Source[n] FormatType Video Input Source[n] Resolution Height Video Input Source[n] Resolution RefreshRate Video Input Source[n] Resolution Width Video Output Connector[n] Connected Video Output Connector[n] ConnectedDevice CEC[n] DeviceType Video Output Connector[n] ConnectedDevice CEC[n] Name Video Output Connector[n] ConnectedDevice CEC[n] PowerControl Video Output Connector[n] ConnectedDevice CEC[n] PowerStatus Video Output Connector[n] ConnectedDevice CEC[n] VendorId Video Output Connector[n] ConnectedDevice Name Video Output Connector[n] ConnectedDevice PreferredFormat Video Selfview FullscreenMode Video Selfview Mode Video Selfview OnMonitorRole Video Selfview PIPPosition

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Chapter 2
About the API

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

API fundamentals
This chapter contains a top-level view of the mechanisms supported by the codec API.
Here you can read about how to access the API, how to use the command line and what the different parts of the API can be used for. Information on how to use the feedback functions that are available for the codec is included in this chapter.
The API consists of four major groups:
· Commands · Configurations · Status · Events
These four groups are hierarchically organized, which makes it easier to find related functionality. You can find the complete lists of all commands, configurations and statuses in the following chapters.

Connecting to the API
There are several ways to access the codec API. Regardless of which method you choose, the structure of the API stays the same. Choose the connection method that suits your application best. Before you start, please read this section about the different methods, as some of those may require additional configuration changes before being enabled.
The following configurations, apart from password, can be set from the System configuration menu on the web interface or from the command line interface. All of the examples are for the command line interface.
Password
The video system is delivered with a default user account with full credentials. The user name is admin, and initially, no password is set for the default user.
It is mandatory to set a password for the admin user in order to restrict access to system configuration. You should in addition set a password for any other user with similar credentials.
You can set the password on the codec's web interface. Open a web browser and enter the IP address of the video system in the address bar and log in. Click your user name in the upper right corner and choose Change password in the drop down menu.

SSH
SSH is a secure TCP/IP connection and it is enabled by default on the codec. It can be disabled. You need a SSH client, such as PuTTY, to access the API over SSH.
xConfiguration NetworkServices SSH Mode: <Off,On>
Telnet
Telnet can be viewed as the equivalent of the serial protocol in the TCP/IP world. Telnet is disabled by default. Before connecting to the codec with Telnet you have to enable it.
To enable Telnet service, configure the following setting on the codec. Changing this setting does not require a reboot of the device, but it may take some time to take effect.
xConfiguration NetworkServices Telnet Mode: <Off,On>
HTTP/HTTPS
As HTTP/HTTPS are connectionless protocols, there is no persistent connection. There are several ways of communicating with the API over HTTP.
In order to enable or disable the HTTP and HTTPS services, configure the following setting on the codec.
xConfiguration NetworkServices HTTP Mode: <Off/HTTP+HTTPS/HTTPS>

Connecting
You can inspect the API by entering the IP-address or host name of the codec in your favorite web browser. In the web interface, you can find the API documents under the menu section Integration > Developer API. The HTTP POST and GET methods are used to execute commands and get feedback from the codec. This is described in "Using HTTP" on page 20 in this document.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

RS-232 / serial connection
The serial connection can be used without an IP address, DNS or a network. Serial connection is allowed by default.
xConfiguration SerialPort Mode: <Off/On> For the SX20 codec you need a USB to RS-232 adapter to connect to the USB port.
Baud-rate and other serial port parameters
The serial port uses 8 data bits, no parity and 1 stop bit. The default baud rate is set to 38400 bps.
The codec can give very much feedback. We therefore recommend keeping the connection at this speed or higher to avoid sluggishness.
You can change the baud rate if required. xConfiguration SerialPort BaudRate: <9600/19200/38400/57600/115200>
During the initial boot sequence, the codec uses a baud rate of 38400 bps regardless of the baud rate you have set.
Login and password
You can choose whether login is required or not for serial connections. For security reasons the password prompting is turned on by default, but it can be turned off if preferred.
xConfiguration SerialPort LoginRequired: <Off/On>

User roles
A user account may hold one or a combination of user roles. A user account with full access rights, like the default admin user, should possess the ADMIN, USER and AUDIT roles.
These are the user roles:
ADMIN: A user with this role can create new users, change most settings, make calls, and search the contact lists. The user cannot upload audit certificates and change the security audit settings.
USER: A user with this role can make calls and search the contact lists. The user can modify a few settings, for example adjust the ringtone volume and set the time and date format.
AUDIT: A user with this role can change the security audit settings and upload audit certificates.
ROOMCONTROL: A user with this role can create in-room controls. The user has access to the In-room control editor and corresponding developement tools.
INTEGRATOR: A user with this role has access to settings, commands and status that are required to set up advanced AV scenarios, and to integrate our video systems with 3rd party equipment. Such a user can also create in-room controls.
Cisco Spark registered systems
If a video system is registered to Cisco's cloud service (Cisco Spark), only local users with the INTEGRATOR and ROOMCONTROL user roles are available.

xStatus

API Reference Guide
Appendices

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

API output
The xPreferences is used to set preferences for the RS-232, Telnet and SSH sessions.
The output modes
· Terminal: Line based output for use with line based control systems
· XML: XML output for use with control systems that understand XML.
· JSON: JSON format is convenient when integrating with web based systems.
The default output mode is terminal. To change this you have to define your preferences for each session individually. Examples in this guide are in terminal mode.
To set output mode to XML, issue the command: xPreferences outputmode xml
To revert to terminal mode, issue the command: xPreferences outputmode terminal

Example: Layout command in terminal mode
xCommand Audio Volume Set Level: 50
Example: Layout command in XML mode
<Command> <Audio> <Volume> <Set command="True"> <Level>50</Level> </Set> </Volume> </Audio> </Command>

xStatus

API Reference Guide
Appendices

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

Using the command line
Help To get a list of all supported top level commands you can type ? or help after connecting to the TelePresence System using RS-232, Telnet or SSH (Example 1).
Bye Typing the bye command closes the command line interface.

xConfiguration

xCommand

xStatus

Example 1:
? - User Commands -

help xgetxml bye OK

xcommand xdocument echo

xconfiguration xevent

xpreferences xtransaction

log

systemtools

xfeedback xstatus

API Reference Guide
Appendices

API commands
xConfiguration
Configurations are system settings, such as system name and network settings. These are persistent across boots. Refer to "Configurations" on page 16.
xCommand
Commands instruct the codec to execute actions, such as to dial a number or to search the phone book. Refer to "Commands" on page 16.
xStatus
A status contains the current state of the codec, such as connected calls, the status of the gatekeeper registration, connected inputs and output sources. Refer to "Status" on page 16.
xFeedback
The Feedback commands are used to specify what parts of the configuration and status hierarchies to monitor. Feedback is only issued on the RS-232, Telnet or SSH session for which it is specified. If you are connecting to the codec with multiple sessions, you have to define feedback individually for each session. Refer to "Feedback mechanism" on page 18.

xPreferences The xPreferences command is used to set preferences for the RS-232, Telnet and SSH sessions. Refer to "API output" on page 13.
Echo <on/off> If echo is set to On the key inputs are displayed when entering text in a command line interface. If echo is set to Off user input is not displayed when entering text in a command line interface.
xEvent The xEvent command returns information on which events are available for feedback. Refer to "Events" on page 17.
xGetxml The xGetxml request returns an XML document based on the location parameter attached to the request. The elements (or a complete document) matching the expression will be returned. Refer to "Feedback mechanism" on page 18.

Other commands
Systemtools
The systemtools commands are a set of command line tools for administrative control and diagnostics. The commands can be used for advanced troubleshooting together with Cisco technical support. Systemtools are not a part of the programming API. Refer to "The SystemTools commands" on page 186.
Log
The log command is used to enable advanced logs. It is only used for debugging the system.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Command line shortcuts
If your client supports it, there are some timesaving shortcuts you can use:
· Tab-completion to complete the commands and arguments.
· Arrow up and arrow down keys to navigate your command history.
· <CTRL-a>: Jump to the beginning of the line. · <CTRL-e>: Jump to the end of the line. · <CTRL-r>: Incremental command history search. · <CTRL-w>: Erase the current line.

Searching
You can use // to search for elements anywhere in the status or configuration hierarchy (Example 1).
You can also combine multiple //'s (Example 2).
NOTE: The search shortcuts work well for inspecting the API, but should not be used in applications. We recommend that you always use the complete paths to avoid command ambiguity when upgrading to newer firmware releases.
Example 1: List all configurations that include words that starts with OUT and HDMI:
xconfiguration //out//hdmi *c xConfiguration Audio Output HDMI 1 Level: 0 *c xConfiguration Audio Output HDMI 1 Mode: On *c xConfiguration Audio Output HDMI 2 Level: 0 *c xConfiguration Audio Output HDMI 2 Mode: Off ** end
Example 2: Get the resolution width of all connected sources for both inputs and outputs:
xStatus //vid//res//wid *s Video Input Source 1 Resolution Width: 1920 *s Video Input Source 2 Resolution Width: 0 *s Video Input Source 3 Resolution Width: 0 *s Video Input Source 4 Resolution Width: 0 *s Video Output Connector 1 Resolution Width: 1920 *s Video Output Connector 2 Resolution Width: 1280 *s Video Output Connector 3 Resolution Width: 1280 ** end

Value types and formats
The system supports the following value types: · Integer values: <x..y>
Defines the valid range for an integer input. x = min value, y = max value. · Literal values: <X/Y/../Z> Defines the possible values for a given configuration. · String values: <S: x, y> Defines that the valid input for this configuration is a string with minimum length of x and maximum length of y characters. Strings can have rules that further specify their format and length.
Input values that contain spaces need to be quoted
Any values for configurations and commands containing spaces must be enclosed in quotes. Quotes are not necessary for values without spaces.
Example: Correct: xCommand dial number: "my number contains spaces" Correct: xCommand dial number: 12345 Incorrect: xCommand dial number: my number contains spaces
Case sensitivity
All commands are case-insensitive. All of the following commands will work.
XCOMMAND DIAL NUMBER: foo@bar.org xcommand dial number: foo@bar.org xCommand Dial Number: foo@bar.org

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Commands
Commands instruct the codec to execute actions, such as to dial a number or to search the phone book. All commands start with the prefix xCommand followed by a command path.
Writing xCommand ? on the command line will list all the top level commands.
To view the complete list of commands and their parameters, write xCommand ?? on the command line.
Command arguments are key-value pairs.
When issuing a xCommand, the command consists of one argument and one required parameter. In this document the command usage is described for all xCommands, with both required and optional parameters. The optional parameters are in brackets.
Example: xCommand Dial Number: 123
· xCommand is the command prefix. The command to be executed is Dial.
· The example contains one argument, Number: 123. Number is the key and 123 is its value. The key/value pair is separated with `:'.

Configurations
Configurations are system settings that are persistent across boots. Like commands, also configurations are structured in a hierarchy.
Writing xConfiguration ? on the command line lists all the top level configurations.
Writing xConfiguration ?? lists all configurations and their value spaces.
Writing xConfiguration lists all configurations and their current values. To list out only some of the configurations, write xConfiguration followed by one or more parts of the configuration paths.
Example: Set the H323 Alias ID
Write in: xConfiguration H323 Profile 1 H323Alias ID: "changed@company.com"
Example: Get the H323 Alias ID
Write in: xConfiguration H323 Profile 1 H323Alias ID
Result: *c xConfiguration H323 Profile 1 H323Alias ID: "changed@company.com" **end

Status
A status contains the current state of the codec, such as connected calls, the status of the gatekeeper registration, connected inputs and output sources.
Writing xStatus ? on the command line lists all top level statuses.
Writing xStatus lists all statuses and their current values.
To list out only some of the statuses, write xstatus followed by the relevant part of the status path (address expression):
xStatus <address expression>

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

Events
Event returns information about the events that are available for feedback. This overview presents examples of some the events that are available on the API. To get an overview of the supported events type ?, ?? or help after xEvent: · xEvent ? Lists the top level events · xEvent ?? List all of the available events · xEvent help Lists the top level events
The result for events depends on the state of the codec.

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Example 1: Outgoing Call Indication
Outgoing Call Indication is an event reported when an outgoing call is about to be dialled. Returns the CallId the call has been assigned.
*e OutgoingCallIndication CallId: x ** end
Example 2: Call Disconnect
Call Disconnect is an event reported when a call is disconnected. Returns the CallId of the disconnected call and reason for the call's disconnection.
*e CallDisconnect CallId: x CauseValue: 0 CauseString: "" CauseType: LocalDisconnect OrigCallDirection: "outgoing" ** end
Example 3: Call Successful
Call Succesful is an event reported when a call is connected successfully, that is when all channels are up and established.
*e CallSuccessful CallId: 132 Protocol: "h223" Direction: "outgoing" CallRate: 768 RemoteURI: "h223:integratorHQ@company.com" EncryptionIn: "Off" EncryptionOut: "Off" ** end

Example 4: FECC Action request
FECC Action request is an event reported when far end is sending FECC commands.
*e FeccActionInd Id: 132 Req: 1 Pan: 1 PanRight: 1 Tilt: 0 TiltUp: 0 Zoom: 0 ZoomIn: 0 Focus: 0 FocusIn: 0 Timeout: 300 VideoSrc: 0 m: 0 ** end
Example 5: TString message received
TString message received is an event reported when far end has sent a TString message.
*e TString CallId: 132 Message: "ee" ** end
Example 6: SString message received
SString message received is an event reported when far end has sent a SString message.
*e SString String: "ee" Id: 132 ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Feedback mechanism
To build solutions that can reliably keep the state between your application and the codec synchronized, you can set up a notification system to report the changes in the state of the codec.
The API supports notifications on the following:
· Configuration changes · Status changes · Event notifications
These notifications will not be sent unless you have explicitly told the codec to do so. You can subscribe to the feedback by registering feedback expressions. How you register feedback expressions varies according to the connection method used.
When using HTTP, the method of handling feedback differs slightly from what is presented in this section. See the "Feedback from codec over HTTP" on page 22 for more information.
WARNING: A codec may give very much feedback, especially when calls are connected and disconnected. Do only subscribe to the feedback you need.
Never register for all status feedback by issuing xFeedback register /Status. This may give the control application too much data to handle, which may lead to sluggish or unpredictable behavior.

Feedback expressions
The expression used when registering for feedback is a variant of the XPath language. The XPath language describes a way to select nodes from an XML/JSON document. The CE software contains three main feedback documents.

Document Status Configuration Event

API command xStatus xConfiguration xEvent

Path /Status /Configuration /Event

The syntax for feedback registering is: xFeedback register <path>
Never register for all status feedback by issuing xFeedback register /Status.
It is safe to register for all configuration changes using xFeedback register /Configuration, as configuration changes will most likely not occur that often.
By going through some examples, we can see how this information can be used to build feedback expressions. A good way to verify the expressions is to point your browser to http://<ip-address>/getxml?location=path or to execute xgetxml <path> from the terminal, and check that the output matches the nodes you want feedback on.

Example 1: Microphones Mute status.
Terminal query xStatus Audio Microphones Mute *s Audio Microphones Mute: Off ** end
Equivalent feedback expression xFeedback register /Status/Audio/Microphones/Mute
Example 2: Name of all video input connectors.
Terminal query xConfiguration Video Input Connector Name *c xConfiguration Video Input Connector 1 Name: "NameA" *c xConfiguration Video Input Connector 2 Name: "NameB" *c xConfiguration Video Input Connector 3 Name: "NameC" *c xConfiguration Video Input Connector 4 Name: "NameD" *c xConfiguration Video Input Connector 5 Name: "NameE" ** end
Equivalent feedback expression xFeedback register /Configuration/Video/Input/ Connector/Name
Example 3: Name of video input connector 3.
Terminal query xConfiguration Video Input Connector 3 Name *c xConfiguration Video Input Connector 3 Name: "NameC" ** end
Equivalent feedback expression xFeedback register /Configuration/Video/Input/ Connector[@item='3']/Name

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

Terminal connections
Managing feedback subscriptions
To register, list and deregister feedback expressions you use the command xFeedback and its corresponding sub commands.
The registered expressions are only valid for the currently active connection. If you open two Telnet sessions and register to get feedback in one session, you do not receive feedback in the other session. This also means that if you disconnect from a session, you have to re-register all expressions after reconnecting.
You can register up to 38 expressions.

Feedback output
The feedback output is exactly the same as you get when querying the system using the xConfiguration and xStatus commands. E.g., if you issue the command xStatus Standby Active on the command line the result is:
*s Standby Active: On ** end
If you have registered for feedback on status changes the feedback you get when the system goes to standby-mode will be exactly the same:
*s Standby Active: On ** end
This means that when you are programming against the device you only need to handle one format.

xStatus

API Reference Guide
Appendices

Example: Managing feedback subscriptions
A: Register feedback expressions. Write in: xFeedback register /Status/Audio Result: ** end
OK Write in: xFeedback register /Event/CallDisconnect Result: ** end
OK Write in: xFeedback register /Configuration/Video/
MainVideoSource Result: ** end
OK
B: List out currently registered expressions. Write in: xFeedback list Result: /Configuration/Video/MainVideoSource
/Event/CallDisconnect /Status/Audio ** end OK
C: Deregister feedback expressions. Write in: xFeedback deregister /Event/ CallDisconnect Result: ** end
OK Write in: xFeedback deregister /Status/Audio Result: ** end
OK
D: List the new feedback expressions. Write in: xFeedback list Result: /Configuration/Video/MainVideoSource
** end OK

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Using HTTP
The codec supports sending commands and configurations over HTTP and HTTPS. It is also possible to retrieve configurations and statuses this way. This interface exposes the same API as the command line, but in XML format.
HTTP XMLAPI Authentication
Access to the XMLAPI requires the user to authenticate using HTTP Basic Access Authentication as a user with `ADMIN' role. Unauthenticated requests prompt a 401 HTTP response containing a Basic Access Authentication challenge. How to use HTTP Basic Access Authentication varies according to the HTTP library or tool that you are using.
If your application will be issuing multiple commands through the API, we highly recommend that you use Session Authentication (see below). The standard basic authentication does a full re-authentication per request, which may affect the performance of your application.
HTTP XMLAPI Session Authentication
Authenticating with your username and password combination for each API request might introduce too much latency for some use-cases. To mitigate this, the API supports a session-based authentication mechanism.
To open a session, issue a POST to http://<ip-address>/xmlapi/session/begin with Basic Access Authentication. The response sets a SessionId-cookie that can be used with subsequent requests.
Note that when using API Session Authentication, it is important to explicitly close the session when you are done. Failing to do so may cause the device to run out of sessions, as there are a limited number of concurrent sessions available, and they do not time out automatically.

URL cheat sheet The following table contains the main URLs used when accessing the API over HTTP.

Method GET GET GET GET GET POST

URL http://<ip-address>/status.xml http://<ip-address>/configuration.xml http://<ip-address>/command.xml http://<ip-address>/valuespace.xml http://<ip-address>/getxml?location=<path> http://<ip-address>/putxml

Description Complete status document Complete configuration document Complete command document Complete valuespace document Retrieve document based on a path Configurations and commands in HTTP body

Example: Starting a HTTP XMLAPI session
Request: POST /xmlapi/session/begin HTTP/1.1 Authorization: Basic <Base64 encoded authentication string>
Response: HTTP/1.1 204 No Content Server: nginx/1.8.0 Connection: keep-alive Set-Cookie: SessionId=f08102c8ce5aaf8fba23a7238 cc2ef464b990e18bfbb7fb048820c0e28955c54; Path=/; HttpOnly
This session counts toward the systems concurrent sessions limit.
With an open session, provide the SessionId cookie to following requests. Your tool/library may do this automatically.
Example: Using a HTTP XMLAPI session
Request: GET /configuration.xml HTTP/1.1 Cookie: SessionId=f08102c8ce5aaf8fba23a7238cc2ef46 4b990e18bfbb7fb048820c0e28955c54

Response: HTTP/1.1 200 OK Server: nginx/1.8.0 Content-Type: text/xml; charset=UTF-8 Content-Length: 43549 Connection: keep-alive <?xml version="1.0"?> <Configuration product="Cisco Codec" version="ce8.2.0" apiVersion="4"> ... </Configuration>
To close a session after use, issue a POST to http://<ip-address>/xmlapi/session/end with the provided cookie.
Example: Closing a HTTP XMLAPI session
Request: POST /xmlapi/session/end HTTP/1.1 Cookie: SessionId=f08102c8ce5aaf8fba23a7238cc2ef46 4b990e18bfbb7fb048820c0e28955c54
Response: HTTP/1.1 204 No Content Server: nginx/1.8.0 Connection: keep-alive Set-Cookie: SessionId=; Max-Age=0; Path=/; HttpOnly

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Getting status and configurations
Example 1: Get all status entries on the codec. http://<ip-address>/getxml?location=/Status
Example 2: Get just the audio statuses of the codec. http://<ip-address>/getxml?location=/Status/Audio
Example 3: Get all configurations of the codec. http://<ip-address>/getxml?location=/Configuration
Example 4: Get all video configurations of the codec. http://<ip-address>/getxml?location=/Configuration/ Video

Sending commands and configurations
Using HTTP POST
When sending configurations and commands to the codec, it is important that the HTTP header Content-Type is set to text/xml, i.e. Content-Type: text/xml. The body of the POST should contain the XML content.
Example 1: Changing the system name. Request
POST /putxml HTTP/1.1 Content-Type: text/xml
<Configuration> <SystemUnit> <Name>newName</Name> </SystemUnit>
</Configuration>

Example 2: Setting the camera position.
Request POST /putxml HTTP/1.1 Content-Type: text/xml
<Command> <Camera> <PositionSet command="True"> <CameraId>1</CameraId> <Pan>200</Pan> <Tilt>200</Tilt> </PositionSet> </Camera>
</Command> Response
HTTP/1.1 200 OK Content-Type: text/xml Content-Length: 91
<?xml version="1.0"?> <Command> <CameraPositionSetResult item="1" status="OK"/> </Command>

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Feedback from codec over HTTP
You can get the device to post http feedback messages (also known as webhooks) on changes to the API state, e.g. statuses, events and configuration updates. The HTTP Post feedback messages will be sent to the specified ServerURL. You can choose between events being posted in either XML or JSON format. You can subscribe to changes on multiple parts of the API by register up to 15 different feedback expressions.
Registering for feedback
The command for registering is xCommand HttpFeedback Register. The syntax for this command and its arguments are described in this section.
HttpFeedback Register syntax:
xCommand HttpFeedback Register FeedbackSlot: <1..4> ServerUrl(r): <S: 1, 2048> Format: <XML/JSON> Expression: <S: 1, 255> Expression: <S: 1, 255> Expression: <S: 1, 255> Expression: <S: 1, 255> Expression: <S: 1, 255> Expression: <S: 1, 255> Expression: <S: 1, 255> Expression: <S: 1, 255> Expression: <S: 1, 255> Expression: <S: 1, 255> Expression: <S: 1, 255> Expression: <S: 1, 255> Expression: <S: 1, 255> Expression: <S: 1, 255> Expression: <S: 1, 255>

HttpFeedback Register arguments:
FeedbackSlot: The codec can register up to 4 slots of servers requesting HTTP feedback. Set the registering to one of them.
NOTE: Avoid using FeedbackSlot 3 in an environment where Cisco TelePresence Management Suite (TMS) is used as TMS uses this feedback slot to register its expressions.
ServerUrl: The URL to the HTTP server where you want the codec to post the HTTP feedback messages to.
Format: Set the format for the feedback from the HTTP server to XML or JSON.
Expression 1-15: The XPath expression specifies which parts of the Status, Configuration or Event documents are monitored. You can have from 1 to 15 XPath expressions
Register the expressions you want to receive feedback on. See the "Feedback mechanism" on page 18 section for more information about the expression formats.
Example: Registering feedback on configuration changes, disconnect events and call status changes.
POST /putxml HTTP/1.1 Content-Type: text/xml
<Command> <HttpFeedback> <Register command="True"> <FeedbackSlot>1</FeedbackSlot> <ServerUrl>http://127.0.0.1/ myhttppostscripturl</ServerUrl> <Format>XML</Format> <Expression item="1">/Configuration</ Expression> <Expression item="2">/Event/ CallDisconnect</Expression> <Expression item="3">/Status/Call</ Expression> </Register> </HttpFeedback>
</Command>

Feedback output
When the codec notifies the registered HTTP server about changes, the body contains the same XML as when polling. There is however one small difference. The root-node contains an Identification node with children that specify the codec from which the notification originated. This means that you can handle multiple codecs with a single HTTP server URI.
Example: Audio volume changed.
<Configuration xmlns="http://www.company.com/XML/ CUIL/2.0">
<Identification> <SystemName>My System Name</SystemName> <MACAddress>00:00:de:ad:be:ef</MACAddress> <IPAddress>192.168.1.100</IPAddress> <ProductType>Cisco Codec</ProductType> <ProductID>Cisco Codec SX20</ProductID> <SWVersion>CE8.3.0.199465</SWVersion> <HWBoard>101401-5 [08]</HWBoard> <SerialNumber>PH0000000</SerialNumber>
</Identification> <Audio item="1">
<Volume item="1">60</Volume> </Audio> </Configuration>

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

Translating from terminal mode to XML
Translating commands
The XML commands maintain the same structure as the terminal commands, but they use a parent-child relationship to describe the hierarchy. You can see this structure in the examples below.
Example 1: Setting up a call.
Terminal xCommand Dial Number: "12345" Protocol: H323
XML <Command> <Dial command="True"> <Number>12345</Number> <Protocol>H323</Protocol> </Dial> </Command>
Example 2: Assigning volume level
Terminal xCommand Audio Volume Set Level: 50
XML <Command> <Audio> <Volume> <Set command="True"> <Level>50</Level> </Set> </Volume> </Audio> </Command>

Translating configurations
Translating from xConfiguration to XML is similar to commands, but with the addition of a special attribute item="NN" for specifying the index in arrays.
Example: Configuring the input source type for video input connector 2.
Terminal xConfiguration Video Input Connector 2 InputSourceType: camera
XML <Configuration> <Video> <Input> <Connector item="2"> <InputSourceType>camera</InputSourceType> </Connector> </Input> </Video> </Configuration>

xStatus

API Reference Guide
Appendices

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

Dos and don'ts
Here are some best practices when programming the Cisco SX series API.
AVOID remote control emulation
The use of xCommand UserInterface OSD Key Click and xCommand UserInterface OSD Key Press commands is highly discouraged. The commands are still available in the API, but we recommend the use of direct commands, as this ensures backwards compatibility in your integrations. Program against the codec, not the on-screen-display.
DO use complete commands
You should always use complete commands when programming, i.e. always use xConfiguration Video instead of xconf vid. The shortcuts can be used for searches in the API on the command line, but not for programming. The reason for this is that you might end up with ambiguous code when additional commands are added to the API.
DO NOT subscribe to unnecessary feedback
Subscribing to too much feedback may congest the control application. Although the amount of feedback may seem fine in the current version, the amount of feedback may grow in future releases.

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Chapter 3
xConfiguration commands

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

Description of the xConfiguration commands
In this chapter, you can find a complete list of the xConfiguration commands. The examples show either the default value or an example of a value.
We recommend you visit our web site regularly for updated versions of the manual. Go to: http://www.cisco.com/go/sx-docs

xCommand

xStatus

API Reference Guide
Appendices

Audio configuration............................................................................................................................... 30 xConfiguration Audio DefaultVolume...........................................................................................................30 xConfiguration Audio Microphones Mute Enabled......................................................................................30 xConfiguration Audio SoundsAndAlerts RingTone......................................................................................30 xConfiguration Audio SoundsAndAlerts RingVolume.................................................................................30 xConfiguration Audio Input Line [1] VideoAssociation MuteOnInactiveVideo.............................................31 xConfiguration Audio Input Line [1] VideoAssociation VideoInputSource...................................................31 xConfiguration Audio Input Microphone [1..2] EchoControl Mode..............................................................31 xConfiguration Audio Input Microphone [1..2] EchoControl NoiseReduction..............................................31 xConfiguration Audio Input Microphone [1..2] EchoControl Dereverberation.............................................32 xConfiguration Audio Input Microphone [1..2] Level....................................................................................32 xConfiguration Audio Input Microphone [1..2] Mode...................................................................................32 xConfiguration Audio Output Line [1] Delay DelayMs..................................................................................32 xConfiguration Audio Output Line [1] Delay Mode.......................................................................................33
Cameras configuration.......................................................................................................................... 33 xConfiguration Cameras Camera [1] Backlight DefaultMode......................................................................33 xConfiguration Cameras Camera [1] Brightness Mode...............................................................................33 xConfiguration Cameras Camera [1] Brightness DefaultLevel....................................................................34 xConfiguration Cameras Camera [1] Flip.....................................................................................................34 xConfiguration Cameras Camera [1] Focus Mode.......................................................................................34 xConfiguration Cameras Camera [1] Gamma Mode....................................................................................34 xConfiguration Cameras Camera [1] Gamma Level....................................................................................35 xConfiguration Cameras Camera [1] Mirror.................................................................................................35 xConfiguration Cameras Camera [1] Whitebalance Mode..........................................................................35

xConfiguration Cameras Camera [1] Whitebalance Level...........................................................................35 xConfiguration Cameras Preset TriggerAutofocus......................................................................................36
Conference configuration...................................................................................................................... 36 xConfiguration Conference AutoAnswer Mode..........................................................................................36 xConfiguration Conference AutoAnswer Mute...........................................................................................36 xConfiguration Conference AutoAnswer Delay...........................................................................................37 xConfiguration Conference DefaultCall Protocol........................................................................................37 xConfiguration Conference DefaultCall Rate...............................................................................................37 xConfiguration Conference DoNotDisturb DefaultTimeout.........................................................................37 xConfiguration Conference Encryption Mode.............................................................................................38 xConfiguration Conference FarEndControl Mode.......................................................................................38 xConfiguration Conference MaxReceiveCallRate.......................................................................................38 xConfiguration Conference MaxTransmitCallRate.......................................................................................38 xConfiguration Conference MaxTotalReceiveCallRate................................................................................39 xConfiguration Conference MaxTotalTransmitCallRate...............................................................................39 xConfiguration Conference MultiStream Mode...........................................................................................39
H323 configuration................................................................................................................................ 40 xConfiguration H323 Authentication Mode.................................................................................................40 xConfiguration H323 Authentication LoginName........................................................................................40 xConfiguration H323 Authentication Password..........................................................................................40 xConfiguration H323 CallSetup Mode.........................................................................................................40 xConfiguration H323 Encryption KeySize....................................................................................................41 xConfiguration H323 Gatekeeper Address.................................................................................................41

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration H323 H323Alias E164.........................................................................................................41 xConfiguration H323 H323Alias ID..............................................................................................................41 xConfiguration H323 NAT Mode.................................................................................................................42 xConfiguration H323 NAT Address.............................................................................................................42
Network configuration........................................................................................................................... 43 xConfiguration Network [1] DNS Domain Name..........................................................................................43 xConfiguration Network [1] DNS Server [1..3] Address...............................................................................43 xConfiguration Network [1] IEEE8021X Mode..............................................................................................43 xConfiguration Network [1] IEEE8021X TlsVerify.........................................................................................43 xConfiguration Network [1] IEEE8021X UseClientCertificate.......................................................................44 xConfiguration Network [1] IEEE8021X Identity...........................................................................................44 xConfiguration Network [1] IEEE8021X Password.......................................................................................44 xConfiguration Network [1] IEEE8021X AnonymousIdentity........................................................................44 xConfiguration Network [1] IEEE8021X Eap Md5.........................................................................................45 xConfiguration Network [1] IEEE8021X Eap Ttls...........................................................................................45 xConfiguration Network [1] IEEE8021X Eap Tls...........................................................................................45 xConfiguration Network [1] IEEE8021X Eap Peap........................................................................................45 xConfiguration Network [1] IPStack.............................................................................................................46 xConfiguration Network [1] IPv4 Assignment..............................................................................................46 xConfiguration Network [1] IPv4 Address....................................................................................................46 xConfiguration Network [1] IPv4 Gateway...................................................................................................46 xConfiguration Network [1] IPv4 SubnetMask.............................................................................................47 xConfiguration Network [1] IPv6 Assignment..............................................................................................47 xConfiguration Network [1] IPv6 Address....................................................................................................47 xConfiguration Network [1] IPv6 Gateway...................................................................................................47 xConfiguration Network [1] IPv6 DHCPOptions...........................................................................................48 xConfiguration Network [1] MTU..................................................................................................................48 xConfiguration Network [1] QoS Mode........................................................................................................48 xConfiguration Network [1] QoS Diffserv Audio..........................................................................................49 xConfiguration Network [1] QoS Diffserv Video..........................................................................................49 xConfiguration Network [1] QoS Diffserv Data............................................................................................50 xConfiguration Network [1] QoS Diffserv Signalling....................................................................................50 xConfiguration Network [1] QoS Diffserv ICMPv6.......................................................................................51

xConfiguration Network [1] QoS Diffserv NTP.............................................................................................51 xConfiguration Network [1] RemoteAccess Allow.......................................................................................51 xConfiguration Network [1] Speed...............................................................................................................52 xConfiguration Network [1] VLAN Voice Mode............................................................................................52 xConfiguration Network [1] VLAN Voice VlanId...........................................................................................52
NetworkServices configuration............................................................................................................. 53 xConfiguration NetworkServices CDP Mode..............................................................................................53 xConfiguration NetworkServices H323 Mode............................................................................................53 xConfiguration NetworkServices HTTP Mode............................................................................................53 xConfiguration NetworkServices HTTPS Server MinimumTLSVersion.......................................................53 xConfiguration NetworkServices HTTPS StrictTransportSecurity .............................................................54 xConfiguration NetworkServices HTTPS VerifyServerCertificate..............................................................54 xConfiguration NetworkServices HTTPS VerifyClientCertificate................................................................54 xConfiguration NetworkServices NTP Mode..............................................................................................54 xConfiguration NetworkServices NTP Server [1..3] Address......................................................................55 xConfiguration NetworkServices SIP Mode................................................................................................55 xConfiguration NetworkServices SNMP Mode...........................................................................................55 xConfiguration NetworkServices SNMP Host [1..3] Address......................................................................55 xConfiguration NetworkServices SNMP CommunityName........................................................................56 xConfiguration NetworkServices SNMP SystemContact...........................................................................56 xConfiguration NetworkServices SNMP SystemLocation..........................................................................56 xConfiguration NetworkServices SSH Mode..............................................................................................56 xConfiguration NetworkServices Telnet Mode...........................................................................................57 xConfiguration NetworkServices UPnP Mode............................................................................................57 xConfiguration NetworkServices WelcomeText..........................................................................................57
Peripherals configuration....................................................................................................................... 58 xConfiguration Peripherals Profile Cameras...............................................................................................58 xConfiguration Peripherals Profile ControlSystems....................................................................................58 xConfiguration Peripherals Profile TouchPanels.........................................................................................58
Phonebook configuration....................................................................................................................... 59 xConfiguration Phonebook Server [1] ID.....................................................................................................59

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration Phonebook Server [1] Type.................................................................................................59 xConfiguration Phonebook Server [1] URL..................................................................................................59
Provisioning configuration..................................................................................................................... 60 xConfiguration Provisioning Connectivity...................................................................................................60 xConfiguration Provisioning Mode..............................................................................................................60 xConfiguration Provisioning LoginName.....................................................................................................61 xConfiguration Provisioning Password........................................................................................................61 xConfiguration Provisioning HttpMethod....................................................................................................61 xConfiguration Provisioning ExternalManager Address..............................................................................61 xConfiguration Provisioning ExternalManager AlternateAddress...............................................................62 xConfiguration Provisioning ExternalManager Protocol..............................................................................62 xConfiguration Provisioning ExternalManager Path....................................................................................62 xConfiguration Provisioning ExternalManager Domain...............................................................................62
Proximity configuration.......................................................................................................................... 63 xConfiguration Proximity Mode...................................................................................................................63 xConfiguration Proximity Services CallControl...........................................................................................63 xConfiguration Proximity Services ContentShare FromClients...................................................................63 xConfiguration Proximity Services ContentShare ToClients.......................................................................63
SerialPort configuration......................................................................................................................... 64 xConfiguration SerialPort Mode..................................................................................................................64 xConfiguration SerialPort BaudRate............................................................................................................64 xConfiguration SerialPort LoginRequired....................................................................................................64
SIP configuration................................................................................................................................... 65 xConfiguration SIP Authentication UserName............................................................................................65 xConfiguration SIP Authentication Password..............................................................................................65 xConfiguration SIP DefaultTransport...........................................................................................................65 xConfiguration SIP DisplayName.................................................................................................................65 xConfiguration SIP Ice Mode.......................................................................................................................66 xConfiguration SIP Ice DefaultCandidate....................................................................................................66 xConfiguration SIP ListenPort.....................................................................................................................66

xConfiguration SIP Proxy [1..4] Address......................................................................................................66 xConfiguration SIP Turn Server...................................................................................................................67 xConfiguration SIP Turn UserName.............................................................................................................67 xConfiguration SIP Turn Password..............................................................................................................67 xConfiguration SIP URI................................................................................................................................67
Standby configuration............................................................................................................................ 68 xConfiguration Standby Control..................................................................................................................68 xConfiguration Standby Delay.....................................................................................................................68 xConfiguration Standby BootAction............................................................................................................68 xConfiguration Standby StandbyAction......................................................................................................68 xConfiguration Standby WakeupAction.......................................................................................................69
SystemUnit configuration...................................................................................................................... 69 xConfiguration SystemUnit Name...............................................................................................................69
Time configuration................................................................................................................................. 70 xConfiguration Time TimeFormat................................................................................................................70 xConfiguration Time DateFormat................................................................................................................70 xConfiguration Time Zone...........................................................................................................................70
UserInterface configuration................................................................................................................... 72 xConfiguration UserInterface ContactInfo Type..........................................................................................72 xConfiguration UserInterface KeyTones Mode............................................................................................72 xConfiguration UserInterface Language.....................................................................................................72 xConfiguration UserInterface OSD Output..................................................................................................73
UserManagement configuration............................................................................................................ 73 xConfiguration UserManagement LDAP Mode...........................................................................................73 xConfiguration UserManagement LDAP Server Address...........................................................................73 xConfiguration UserManagement LDAP Server Port.................................................................................. 74 xConfiguration UserManagement LDAP Encryption................................................................................... 74 xConfiguration UserManagement LDAP MinimumTLSVersion.................................................................... 74 xConfiguration UserManagement LDAP VerifyServerCertificate............................................................... 74

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xConfiguration UserManagement LDAP Admin Filter.................................................................................75 xConfiguration UserManagement LDAP Admin Group...............................................................................75 xConfiguration UserManagement LDAP Attribute.......................................................................................75
Video configuration............................................................................................................................... 76 xConfiguration Video DefaultMainSource...................................................................................................76 xConfiguration Video Input Connector [1..2] CameraControl Mode............................................................76 xConfiguration Video Input Connector [1..2] CameraControl CameraId.....................................................76 xConfiguration Video Input Connector [2] DviType.....................................................................................76 xConfiguration Video Input Connector [1..2] InputSourceType...................................................................77 xConfiguration Video Input Connector [1..2] Name.....................................................................................77 xConfiguration Video Input Connector [1..2] Quality...................................................................................77 xConfiguration Video Input Connector [1..2] PresentationSelection...........................................................78 xConfiguration Video Input Connector [1..2] Visibility.................................................................................78 xConfiguration Video Monitors....................................................................................................................79 xConfiguration Video Output Connector [1..2] CEC Mode..........................................................................79 xConfiguration Video Output Connector [1..2] MonitorRole........................................................................80 xConfiguration Video Output Connector [1..2] OverscanLevel...................................................................80 xConfiguration Video Output Connector [1..2] Resolution...........................................................................81 xConfiguration Video Presentation DefaultSource......................................................................................81 xConfiguration Video Selfview Default Mode..............................................................................................81 xConfiguration Video Selfview Default FullscreenMode.............................................................................81 xConfiguration Video Selfview Default OnMonitorRole...............................................................................82 xConfiguration Video Selfview Default PIPPosition.....................................................................................82 xConfiguration Video Selfview OnCall Mode..............................................................................................83 xConfiguration Video Selfview OnCall Duration..........................................................................................83

xCommand

xStatus

API Reference Guide
Appendices

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Audio configuration
xConfiguration Audio DefaultVolume
Define the default volume for the speakers. The volume is set to this value when you switch on or restart the video system. Use the Touch controller or remote control to change the volume while the video system is running. You may also use API commands (xCommand Audio Volume) to change the volume while the video system is running, and to reset to default value.
Requires user role: ADMIN, INTEGRATOR, USER Default value: 50
USAGE: xConfiguration Audio DefaultVolume: DefaultVolume where DefaultVolume: Integer (0..100) Select a value between 1 and 100. This corresponds to the dB range from -34.5 dB to 15 dB, in steps of 0.5 dB. If set to 0 the audio is switched off.
xConfiguration Audio Microphones Mute Enabled
Define the microphone mute behaviour on the video system.
Requires user role: ADMIN, INTEGRATOR Default value: True
USAGE: xConfiguration Audio Microphones Mute Enabled: Enabled where Enabled: True/InCallOnly True: Muting of audio is always available. InCallOnly: Muting of audio is only available when the device is in a call. When Idle it is not possible to mute the microphone. This is useful when an external telephone service/ audio system is connected via the codec and is to be available when the codec is not in a call. When set to InCallOnly this will prevent the audio-system from being muted by mistake.

xConfiguration Audio SoundsAndAlerts RingTone
Define which ringtone to use for incoming calls.
Requires user role: ADMIN, INTEGRATOR, USER Default value: Sunrise
USAGE: xConfiguration Audio SoundsAndAlerts RingTone: RingTone where RingTone: Sunrise/Mischief/Ripples/Reflections/Vibes/Delight/Evolve/Playful/Ascent/ Calculation/Mellow/Ringer Select a ringtone from the list.
xConfiguration Audio SoundsAndAlerts RingVolume
Define the ring volume for incoming calls.
Requires user role: ADMIN, INTEGRATOR, USER Default value: 50
USAGE: xConfiguration Audio SoundsAndAlerts RingVolume: RingVolume where RingVolume: Integer (0..100) The value goes in steps of 5 from 0 to 100 (from -34.5 dB to 15 dB). Volume 0 = Off.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration Audio Input Line [1] VideoAssociation MuteOnInactiveVideo
The audio source can be associated with a video source on the video input connector, and you can determine whether to play or mute audio depending on whether the video source is presented or not.
Requires user role: ADMIN, INTEGRATOR Default value: On
USAGE: xConfiguration Audio Input Line n VideoAssociation MuteOnInactiveVideo: MuteOnInactiveVideo where n: Unique ID that identifies the audio line input. Range: 1..1 MuteOnInactiveVideo: Off/On Off: The audio source is not associated with a video source. The audio will be played locally and to far end regardless of whether the video source is presented.
On: The audio source is associated with a video source. The audio will be played (locally and to far end) when the associated video source is presented. The audio will be muted when the video source is not presented.
xConfiguration Audio Input Line [1] VideoAssociation VideoInputSource
The audio source can be associated with a video source on the video input connector.
Requires user role: ADMIN, INTEGRATOR Default value: 2
USAGE: xConfiguration Audio Input Line n VideoAssociation VideoInputSource: VideoInputSource where n: Unique ID that identifies the audio line input. Range: 1..1 VideoInputSource: 1/2 Select the video input connector to associate the audio source with.

xConfiguration Audio Input Microphone [1..2] EchoControl Mode
The echo canceller continuously adjusts itself to the audio characteristics of the room, and compensates for any changes it detects in the audio environment. If the changes in the audio conditions are significant, the echo canceller may take a second or two to re-adjust.
Requires user role: ADMIN, INTEGRATOR Default value: On
USAGE: xConfiguration Audio Input Microphone n EchoControl Mode: Mode where n: Unique ID that identifies the microphone input. Range: 1..2 Mode: Off/On Off: Turn off the echo control. Recommended if external echo cancellation or playback equipment is used.
On: Turn on the echo control. Recommended, in general, to prevent the far end from hearing their own audio. Once selected, echo cancellation is active at all times.
xConfiguration Audio Input Microphone [1..2] EchoControl NoiseReduction
The system has built-in noise reduction, which reduces stationary background noise, for example noise from air-conditioning systems, cooling fans etc. In addition, a high pass filter (Humfilter) reduces very low frequency noise. Noise reduction requires that Audio Input Microphone [n] EchoControl Mode is enabled.
Requires user role: ADMIN, INTEGRATOR Default value: On
USAGE: xConfiguration Audio Input Microphone n EchoControl NoiseReduction: NoiseReduction where n: Unique ID that identifies the microphone input. Range: 1..2 NoiseReduction: Off/On Off: Turn off the noise reduction.
On: Turn on the noise reduction. Recommended in the presence of low frequency noise.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xConfiguration Audio Input Microphone [1..2] EchoControl Dereverberation
The system has built-in signal processing to reduce the effect of room reverberation. Dereverberation requires that Audio Input Microphone [n] EchoControl Mode is enabled.
Requires user role: ADMIN, INTEGRATOR Default value: Off
USAGE: xConfiguration Audio Input Microphone n EchoControl Dereverberation: Dereverberation where n: Unique ID that identifies the microphone input. Range: 1..2 Dereverberation: Off/On Off: Turn off the dereverberation. On: Turn on the dereverberation.
xConfiguration Audio Input Microphone [1..2] Level
Define the audio level of the Microphone input connector.
Requires user role: ADMIN, INTEGRATOR Default value: 14
USAGE: xConfiguration Audio Input Microphone n Level: Level where n: Unique ID that identifies the microphone input. Range: 1..2 Level: Integer (0..24) Select a value between 0 and 24, in steps of 1 dB.

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration Audio Input Microphone [1..2] Mode
Disable or enable audio on the microphone connector.
Requires user role: ADMIN, INTEGRATOR Default value: On
USAGE: xConfiguration Audio Input Microphone n Mode: Mode where n: Unique ID that identifies the microphone input. Range: 1..2 Mode: Off/On Off: Disable the audio input microphone connector. On: Enable the audio input microphone connector.
xConfiguration Audio Output Line [1] Delay DelayMs
To obtain lip-synchronization, you can configure each audio line output with an extra delay that compensates for delay in other connected devices, for example TVs and external loudspeakers. The delay that you set here is either fixed or relative to the delay on the HDMI output, as defined in the Audio Output Line [n] Delay Mode setting.
Requires user role: ADMIN, INTEGRATOR Default value: 0
USAGE: xConfiguration Audio Output Line n Delay DelayMs: DelayMs where n: Unique ID that identifies the audio line output. Range: 1..6 DelayMs: Integer (0..290) The delay in milliseconds.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration Audio Output Line [1] Delay Mode
You may add extra delay to an audio line output with the Audio Output Line [n] Delay DelayMs setting. The extra delay added is either a fixed number of milliseconds, or a number of milliseconds relative to the detected delay on the HDMI output (typically introduced by the connected TV).
Requires user role: ADMIN, INTEGRATOR Default value: RelativeToHDMI
USAGE: xConfiguration Audio Output Line n Delay Mode: Mode where n: Unique ID that identifies the audio line output. Range: 1..6 Mode: Fixed/RelativeToHDMI Fixed: Any extra delay (DelayMs) added to the output, will be a fixed number of millisecond.
RelativeToHDMI: Any extra delay (DelayMs) added to the output, will be relative to the detected delay on the HDMI output. The actual delay is HDMI-delay + DelayMs. The Audio Output Connectors Line [n] DelayMs status reports the actual delay.

Cameras configuration
xConfiguration Cameras Camera [1] Backlight DefaultMode
This configuration turns backlight compensation on or off. Backlight compensation is useful when there is much light behind the persons in the room. Without compensation the persons will easily appear very dark to the far end.
Requires user role: ADMIN, INTEGRATOR Default value: Off
USAGE: xConfiguration Cameras Camera n Backlight DefaultMode: DefaultMode where n: Unique ID that identifies the camera. Range: 1..1 DefaultMode: Off/On Off: Turn off the camera backlight compensation. On: Turn on the camera backlight compensation.
xConfiguration Cameras Camera [1] Brightness Mode
Define the camera brightness mode.
Requires user role: ADMIN, INTEGRATOR Default value: Auto
USAGE: xConfiguration Cameras Camera n Brightness Mode: Mode where n: Unique ID that identifies the camera. Range: 1..1 Mode: Auto/Manual Auto: The camera brightness is automatically set by the system. Manual: Enable manual control of the camera brightness. The brightness level is set using the Cameras Camera [n] Brightness DefaultLevel setting.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration Cameras Camera [1] Brightness DefaultLevel
Define the brightness level. Requires the Cameras Camera [n] Brightness Mode to be set to Manual.
Requires user role: ADMIN, INTEGRATOR Default value: 20
USAGE: xConfiguration Cameras Camera n Brightness DefaultLevel: DefaultLevel where n: Unique ID that identifies the camera. Range: 1..1 DefaultLevel: Integer (1..31) The brightness level.
xConfiguration Cameras Camera [1] Flip
With Flip mode (vertical flip) you can flip the image upside down. Flipping applies both to the self-view and the video that is transmitted to the far end.
Requires user role: ADMIN, INTEGRATOR Default value: Auto
USAGE: xConfiguration Cameras Camera n Flip: Flip where n: Unique ID that identifies the camera. Range: 1..1 Flip: Auto/Off/On Auto: If the camera detects that it is mounted upside down, the image is automatically flipped. If the camera cannot auto-detect whether it is mounted upside down or not, the image is not changed.
Off: Display the image on screen the normal way.
On: Display the image flipped upside down. This setting is used when a camera is mounted upside down, but cannot automatically detect which way it is mounted.

xConfiguration Cameras Camera [1] Focus Mode
Define the camera focus mode.
Requires user role: ADMIN, INTEGRATOR Default value: Auto
USAGE: xConfiguration Cameras Camera n Focus Mode: Mode where n: Unique ID that identifies the camera. Range: 1..1 Mode: Auto/Manual Auto: The camera will auto focus once a call is connected, as well as after moving the camera (pan, tilt, zoom). The system will use auto focus only for a few seconds to set the right focus; then auto focus is turned off to prevent continuous focus adjustments of the camera.
Manual: Turn the autofocus off and adjust the camera focus manually.
xConfiguration Cameras Camera [1] Gamma Mode
This setting enables gamma corrections, and applies only to cameras which support gamma mode. Gamma describes the nonlinear relationship between image pixels and monitor brightness.
Requires user role: ADMIN, INTEGRATOR Default value: Auto
USAGE: xConfiguration Cameras Camera n Gamma Mode: Mode where n: Unique ID that identifies the camera. Range: 1..1 Mode: Auto/Manual Auto: Auto is the default and the recommended setting.
Manual: In manual mode the gamma value is changed with the gamma level setting, ref. Cameras Camera [n] Gamma Level.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration Cameras Camera [1] Gamma Level
By setting the Gamma Level you can select which gamma correction table to use. This setting may be useful in difficult lighting conditions, where changes to the brightness setting does not provide satisfactory results. Requires the Cameras Camera [n] Gamma Mode to be set to Manual.
Requires user role: ADMIN, INTEGRATOR Default value: 0
USAGE: xConfiguration Cameras Camera n Gamma Level: Level where n: Unique ID that identifies the camera. Range: 1..1 Level: Integer (0..7) Define the gamma level.
xConfiguration Cameras Camera [1] Mirror
With Mirror mode (horizontal flip) you can mirror the image on screen. Mirroring applies both to the self-view and the video that is transmitted to the far end.
Requires user role: ADMIN, INTEGRATOR Default value: Auto
USAGE: xConfiguration Cameras Camera n Mirror: Mirror where n: Unique ID that identifies the camera. Range: 1..1 Mirror: Auto/Off/On Auto: If the camera detects that it is mounted upside down, the image is automatically mirrored. If the camera cannot auto-detect whether it is mounted upside down or not, the image is not changed.
Off: Display the image as other people see you.
On: Display the image as you see yourself in a mirror.

xConfiguration Cameras Camera [1] Whitebalance Mode
Define the camera white balance mode.
Requires user role: ADMIN, INTEGRATOR Default value: Auto
USAGE: xConfiguration Cameras Camera n Whitebalance Mode: Mode where n: Unique ID that identifies the camera. Range: 1..1 Mode: Auto/Manual Auto: The camera will continuously adjust the white balance depending on the camera view. Manual: Enables manual control of the camera white balance. The white balance level is set using the Cameras Camera [n] Whitebalance Level setting.
xConfiguration Cameras Camera [1] Whitebalance Level
Define the white balance level. Requires the Cameras Camera [n] Whitebalance Mode to be set to manual.
Requires user role: ADMIN, INTEGRATOR Default value: 1
USAGE: xConfiguration Cameras Camera n Whitebalance Level: Level where n: Unique ID that identifies the camera. Range: 1..1 Level: Integer (1..16) The white balance level.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration Cameras Preset TriggerAutofocus
The current position (pan and tilt), zoom and focus are stored with a preset. Use this setting to determine if the camera should refocus or use the focus value that is stored with the preset.
Requires user role: ADMIN Default value: Auto
USAGE: xConfiguration Cameras Preset TriggerAutofocus: TriggerAutofocus where TriggerAutofocus: Auto/Off/On Auto: Whether the camera refocuses or not when selecting a preset, depends on the camera type.
Off: The focus value that is stored with the preset will be used. The camera will not refocus when selecting a preset.
On: The camera will refocus when selecting a preset. The focus value that is stored with the preset may be overridden.

Conference configuration
xConfiguration Conference AutoAnswer Mode
Define the auto answer mode. Use the Conference AutoAnswer Delay setting if you want the system to wait a number of seconds before answering the call, and use the Conference AutoAnswer Mute setting if you want your microphone to be muted when the call is answered.
Requires user role: ADMIN Default value: Off
USAGE: xConfiguration Conference AutoAnswer Mode: Mode where Mode: Off/On Off: You must answer incomming calls manually by pressing the OK key or the green Call key on the remote control, or by tapping Answer on the Touch controller. On: The system automatically answers incoming calls, except if you are already in a call. You must always answer or decline incoming calls manually when you are already engaged in a call.
xConfiguration Conference AutoAnswer Mute
Define if the microphone shall be muted when an incoming call is automatically answered. Requires that AutoAnswer Mode is switched on.
Requires user role: ADMIN Default value: Off
USAGE: xConfiguration Conference AutoAnswer Mute: Mute where Mute: Off/On Off: The incoming call will not be muted. On: The incoming call will be muted when automatically answered.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration Conference AutoAnswer Delay
Define how long (in seconds) an incoming call has to wait before it is answered automatically by the system. Requires that AutoAnswer Mode is switched on.
Requires user role: ADMIN Default value: 0
USAGE: xConfiguration Conference AutoAnswer Delay: Delay where Delay: Integer (0..50) The auto answer delay (seconds).
xConfiguration Conference DefaultCall Protocol
Define the Default Call Protocol to be used when placing calls from the system.
Requires user role: ADMIN Default value: Auto
USAGE: xConfiguration Conference DefaultCall Protocol: Protocol where Protocol: Auto/H320/H323/Sip/Spark Auto: Enables auto-selection of the call protocol based on which protocols are available. If multiple protocols are available, the order of priority is: 1) SIP; 2) H323; 3) H320. If the system cannot register, the auto-selection chooses H323. H320: All calls are set up as H.320 calls (only applicable if connected to Cisco TelePresence ISDN Link). H323: All calls are set up as H.323 calls. Sip: All calls are set up as SIP calls. Spark: Reserved for Spark registered systems. Do not use.

xConfiguration Conference DefaultCall Rate
Define the Default Call Rate to be used when placing calls from the system.
Requires user role: ADMIN, INTEGRATOR Default value: 3072
USAGE: xConfiguration Conference DefaultCall Rate: Rate where Rate: Integer (64..6000) The default call rate (kbps).
xConfiguration Conference DoNotDisturb DefaultTimeout
This setting determines the default duration of a Do Not Disturb session, i.e. the period when incoming calls are rejected and registered as missed calls. The session can be terminated earlier by using the user interface. The default value is 60 minutes.
Requires user role: ADMIN, INTEGRATOR Default value: 60
USAGE: xConfiguration Conference DoNotDisturb DefaultTimeout: DefaultTimeout where DefaultTimeout: Integer (1..1440) The number of minutes (maximum 1440 minutes = 24 hours) before the Do Not Disturb session times out automatically.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration Conference Encryption Mode
Define the conference encryption mode. A padlock with the text "Encryption On" or "Encryption Off" displays on screen for a few seconds when the conference starts. NOTE: If the CE-NC software (no crypto) is installed on the video system, the encryption mode is always Off.
Requires user role: ADMIN Default value: BestEffort
USAGE: xConfiguration Conference Encryption Mode: Mode where Mode: Off/On/BestEffort Off: The system will not use encryption.
On: The system will only allow calls that are encrypted.
BestEffort: The system will use encryption whenever possible.
> In Point to point calls: If the far end system supports encryption (AES-128), the call will be encrypted. If not, the call will proceed without encryption.
> In MultiSite calls: In order to have encrypted MultiSite conferences, all sites must support encryption. If not, the conference will be unencrypted.
xConfiguration Conference FarEndControl Mode
Lets you decide if the remote side (far end) should be allowed to select your video sources and control your local camera (pan, tilt, zoom).
Requires user role: ADMIN Default value: On
USAGE: xConfiguration Conference FarEndControl Mode: Mode where Mode: Off/On Off: The far end is not allowed to select your video sources or to control your local camera (pan, tilt, zoom).
On: Allows the far end to be able to select your video sources and control your local camera (pan, tilt, zoom). You will still be able to control your camera and select your video sources as normal.

xConfiguration Conference MaxReceiveCallRate
Define the maximum receive bit rate to be used when placing or receiving calls. Note that this is the maximum bit rate for each individual call; use the Conference MaxTotalReceiveCallRate setting to set the aggregated maximum for all simultaneous active calls.
Requires user role: ADMIN Default value: 6000
USAGE: xConfiguration Conference MaxReceiveCallRate: MaxReceiveCallRate where MaxReceiveCallRate: Integer (64..6000) The maximum receive call rate (kbps).
xConfiguration Conference MaxTransmitCallRate
Define the maximum transmit bit rate to be used when placing or receiving calls. Note that this is the maximum bit rate for each individual call; use the Conference MaxTotalTransmitCallRate setting to set the aggregated maximum for all simultaneous active calls.
Requires user role: ADMIN Default value: 6000
USAGE: xConfiguration Conference MaxTransmitCallRate: MaxTransmitCallRate where MaxTransmitCallRate: Integer (64..6000) The maximum transmitt call rate (kbps).

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration Conference MaxTotalReceiveCallRate
This configuration applies when using a video system's built-in MultiSite feature (optional) to host a multipoint video conference. Define the maximum overall receive bit rate allowed. The bit rate will be divided fairly among all active calls at any time. This means that the individual calls will be up-speeded or downspeeded as appropriate when someone leaves or enters a multipoint conference, or when a call is put on hold (suspended) or resumed. The maximum receive bit rate for each individual call is defined in the Conference MaxReceiveCallRate setting.
Requires user role: ADMIN Default value: 6000
USAGE: xConfiguration Conference MaxTotalReceiveCallRate: MaxTotalReceiveCallRate where MaxTotalReceiveCallRate: Integer (64..6000) The maximum receive call rate (kbps).
xConfiguration Conference MaxTotalTransmitCallRate
This configuration applies when using a video system's built-in MultiSite feature (optional) to host a multipoint video conference. Define the maximum overall transmit bit rate allowed. The bit rate will be divided fairly among all active calls at any time. This means that the individual calls will be up-speeded or downspeeded as appropriate when someone leaves or enters a multipoint conference, or when a call is put on hold (suspended) or resumed. The maximum transmit bit rate for each individual call is defined in the Conference MaxTransmitCallRate setting.
Requires user role: ADMIN Default value: 6000
USAGE: xConfiguration Conference MaxTotalTransmitCallRate: MaxTotalTransmitCallRate where MaxTotalTransmitCallRate: Integer (64..6000) The maximum transmit call rate (kbps).

xConfiguration Conference MultiStream Mode
The video system supports multistream video for conferences, provided that the conference infrastructure supports the feature.
Requires user role: ADMIN Default value: Off
USAGE: xConfiguration Conference MultiStream Mode: Mode where Mode: Off Off: Multistream is disabled.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

H323 configuration
xConfiguration H323 Authentication Mode
Define the authenticatin mode for the H.323 profile.
Requires user role: ADMIN Default value: Off
USAGE: xConfiguration H323 Authentication Mode: Mode where Mode: Off/On Off: The system will not try to authenticate itself to a H.323 Gatekeeper, but will still try a normal registration. On: If an H.323 Gatekeeper indicates that it requires authentication, the system will try to authenticate itself to the gatekeeper. Requires the H323 Authentication LoginName and H323 Authentication Password settings to be defined on both the codec and the Gatekeeper.
xConfiguration H323 Authentication LoginName
The system sends the H323 Authentication Login Name and the H323 Authentication Password to an H.323 Gatekeeper for authentication. The authentication is a one way authentication from the codec to the H.323 Gatekeeper, i.e. the system is authenticated to the gatekeeper. If the H.323 Gatekeeper indicates that no authentication is required, the system will still try to register. Requires the H.323 Authentication Mode to be enabled.
Requires user role: ADMIN Default value: ""
USAGE: xConfiguration H323 Authentication LoginName: "LoginName" where LoginName: String (0, 50) The authentication login name.

xConfiguration H323 Authentication Password
The system sends the H323 Authentication Login Name and the H323 Authentication Password to an H.323 Gatekeeper for authentication. The authentication is a one way authentication from the codec to the H.323 Gatekeeper, i.e. the system is authenticated to the gatekeeper. If the H.323 Gatekeeper indicates that no authentication is required, the system will still try to register. Requires the H.323 Authentication Mode to be enabled.
Requires user role: ADMIN Default value: ""
USAGE: xConfiguration H323 Authentication Password: "Password" where Password: String (0, 50) The authentication password.
xConfiguration H323 CallSetup Mode
Defines whether to use a Gatekeeper or Direct calling when establishing H.323 calls. Direct H.323 calls can be made also when H323 CallSetup Mode is set to Gatekeeper.
Requires user role: ADMIN Default value: Gatekeeper
USAGE: xConfiguration H323 CallSetup Mode: Mode where Mode: Direct/Gatekeeper Direct: You can only make an H.323 call by dialing an IP address directly.
Gatekeeper: The system uses a Gatekeeper to make an H.323 call. When choosing this option, the H323 Gatekeeper Address must also be configured.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration H323 Encryption KeySize
Define the minimum or maximum key size for the Diffie-Hellman key exchange method, which is used when establishing the Advanced Encryption Standard (AES) encryption key.
Requires user role: ADMIN Default value: Min1024bit
USAGE: xConfiguration H323 Encryption KeySize: KeySize where KeySize: Min1024bit/Max1024bit/Min2048bit Min1024bit: The minimum size is 1024 bit. Max1024bit: The maximum size is 1024 bit. Min2048bit: The minimum size is 2048 bit.
xConfiguration H323 Gatekeeper Address
Define the IP address of the Gatekeeper. Requires H323 CallSetup Mode to be set to Gatekeeper.
Requires user role: ADMIN Default value: ""
USAGE: xConfiguration H323 Gatekeeper Address: "Address" where Address: String (0, 255) A valid IPv4 address, IPv6 address or DNS name.

xConfiguration H323 H323Alias E164
The H.323 Alias E.164 defines the address of the system, according to the numbering plan implemented in the H.323 Gatekeeper. The E.164 alias is equivalent to a telephone number, sometimes combined with access codes.
Requires user role: ADMIN Default value: ""
USAGE: xConfiguration H323 H323Alias E164: "E164" where E164: String (0, 30) The H.323 Alias E.164 address. Valid characters are 0-9, * and #.
xConfiguration H323 H323Alias ID
Define the H.323 Alias ID, which is used to address the system on a H.323 Gatekeeper and will be displayed in the call lists.
Requires user role: ADMIN Default value: ""
USAGE: xConfiguration H323 H323Alias ID: "ID" where ID: String (0, 49) The H.323 Alias ID. Example: "firstname.lastname@company.com", "My H.323 Alias ID"

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration H323 NAT Mode
The firewall traversal technology creates a secure path through the firewall barrier, and enables proper exchange of audio/video data when connected to an external video conferencing system (when the IP traffic goes through a NAT router). NOTE: NAT does not work in conjunction with gatekeepers.
Requires user role: ADMIN Default value: Off
USAGE: xConfiguration H323 NAT Mode: Mode where Mode: Auto/Off/On Auto: The system will determine if the H323 NAT Address or the real IP address should be used in signaling. This makes it possible to place calls to endpoints on the LAN as well as endpoints on the WAN. If the H323 NAT Address is wrong or not set, the real IP address will be used.
Off: The system will signal the real IP address.
On: The system will signal the configured H323 NAT Address instead of its real IP address in Q.931 and H.245. The NAT server address will be shown in the startupmenu as: "My IP Address: 10.0.2.1". If the H323 NAT Address is wrong or not set, H.323 calls cannot be set up.

xConfiguration H323 NAT Address
Define the external/global IP address to the router with NAT support. Packets sent to the router will then be routed to the system. Note that NAT cannot be used when registered to a gatekeeper. In the router, the following ports must be routed to the system's IP address: * Port 1720 * Port 5555-6555 * Port 2326-2487
Requires user role: ADMIN Default value: ""
USAGE: xConfiguration H323 NAT Address: "Address" where Address: String (0, 64) A valid IPv4 address or IPv6 address.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Network configuration
xConfiguration Network [1] DNS Domain Name
The DNS Domain Name is the default domain name suffix which is added to unqualified names. Example: If the DNS Domain Name is "company.com" and the name to lookup is "MyVideoSystem", this will result in the DNS lookup "MyVideoSystem.company.com".
Requires user role: ADMIN, USER Default value: ""
USAGE: xConfiguration Network n DNS Domain Name: "Name" where n: Index that identifies the network. Range: 1..1 Name: String (0, 64) The DNS domain name.
xConfiguration Network [1] DNS Server [1..3] Address
Define the network addresses for DNS servers. Up to three addresses may be specified. If the network addresses are unknown, contact your administrator or Internet Service Provider.
Requires user role: ADMIN, USER Default value: ""
USAGE: xConfiguration Network n DNS Server m Address: "Address" where n: Index that identifies the network. Range: 1..1 m: Index that identifies the DNS server. Maximum three DNS servers are allowed. Range: 1..3 Address: String (0, 64) A valid IPv4 address or IPv6 address.

xConfiguration Network [1] IEEE8021X Mode
The system can be connected to an IEEE 802.1X LAN network, with a port-based network access control that is used to provide authenticated network access for Ethernet networks.
Requires user role: ADMIN, USER Default value: Off
USAGE: xConfiguration Network n IEEE8021X Mode: Mode where n: Index that identifies the network. Range: 1..1 Mode: Off/On Off: The 802.1X authentication is disabled (default).
On: The 802.1X authentication is enabled.
xConfiguration Network [1] IEEE8021X TlsVerify
Verification of the server-side certificate of an IEEE802.1x connection against the certificates in the local CA-list when TLS is used. The CA-list must be uploaded to the video system. This can be done from the web interface. This setting takes effect only when Network [1] IEEE8021X Eap Tls is enabled (On).
Requires user role: ADMIN, USER Default value: Off
USAGE: xConfiguration Network n IEEE8021X TlsVerify: TlsVerify where n: Index that identifies the network. Range: 1..1 TlsVerify: Off/On Off: When set to Off, TLS connections are allowed without verifying the server-side X.509 certificate against the local CA-list. This should typically be selected if no CA-list has been uploaded to the codec.
On: When set to On, the server-side X.509 certificate will be validated against the local CA-list for all TLS connections. Only servers with a valid certificate will be allowed.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration Network [1] IEEE8021X UseClientCertificate
Authentication using a private key/certificate pair during an IEEE802.1x connection. The authentication X.509 certificate must be uploaded to the video system. This can be done from the web interface.
Requires user role: ADMIN, USER Default value: Off
USAGE: xConfiguration Network n IEEE8021X UseClientCertificate: UseClientCertificate where n: Index that identifies the network. Range: 1..1 UseClientCertificate: Off/On Off: When set to Off client-side authentication is not used (only server-side). On: When set to On the client (video system) will perform a mutual authentication TLS handshake with the server.
xConfiguration Network [1] IEEE8021X Identity
Define the user name for 802.1X authentication.
Requires user role: ADMIN, USER Default value: ""
USAGE: xConfiguration Network n IEEE8021X Identity: "Identity" where n: Index that identifies the network. Range: 1..1 Identity: String (0, 64) The user name for 802.1X authentication.

xConfiguration Network [1] IEEE8021X Password
Define the password for 802.1X authentication.
Requires user role: ADMIN, USER Default value: ""
USAGE: xConfiguration Network n IEEE8021X Password: "Password" where n: Index that identifies the network. Range: 1..1 Password: String (0, 32) The password for 802.1X authentication.
xConfiguration Network [1] IEEE8021X AnonymousIdentity
The 802.1X Anonymous ID string is to be used as unencrypted identity with EAP (Extensible Authentication Protocol) types that support different tunneled identity, like EAP-PEAP and EAP-TTLS. If set, the anonymous ID will be used for the initial (unencrypted) EAP Identity Request.
Requires user role: ADMIN, USER Default value: ""
USAGE: xConfiguration Network n IEEE8021X AnonymousIdentity: "AnonymousIdentity" where n: Index that identifies the network. Range: 1..1 AnonymousIdentity: String (0, 64) The 802.1X Anonymous ID string.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration Network [1] IEEE8021X Eap Md5
Define the Md5 (Message-Digest Algorithm 5) mode. This is a Challenge Handshake Authentication Protocol that relies on a shared secret. Md5 is a Weak security.
Requires user role: ADMIN, USER Default value: On
USAGE: xConfiguration Network n IEEE8021X Eap Md5: Md5 where n: Index that identifies the network. Range: 1..1 Md5: Off/On Off: The EAP-MD5 protocol is disabled. On: The EAP-MD5 protocol is enabled (default).
xConfiguration Network [1] IEEE8021X Eap Ttls
Define the TTLS (Tunneled Transport Layer Security) mode. Authenticates LAN clients without the need for client certificates. Developed by Funk Software and Certicom. Usually supported by Agere Systems, Proxim and Avaya.
Requires user role: ADMIN, USER Default value: On
USAGE: xConfiguration Network n IEEE8021X Eap Ttls: Ttls where n: Index that identifies the network. Range: 1..1 Ttls: Off/On Off: The EAP-TTLS protocol is disabled. On: The EAP-TTLS protocol is enabled (default).

xConfiguration Network [1] IEEE8021X Eap Tls
Enable or disable the use of EAP-TLS (Transport Layer Security) for IEEE802.1x connections. The EAP-TLS protocol, defined in RFC 5216, is considered one of the most secure EAP standards. LAN clients are authenticated using client certificates.
Requires user role: ADMIN, USER Default value: On
USAGE: xConfiguration Network n IEEE8021X Eap Tls: Tls where n: Index that identifies the network. Range: 1..1 Tls: Off/On Off: The EAP-TLS protocol is disabled. On: The EAP-TLS protocol is enabled (default).
xConfiguration Network [1] IEEE8021X Eap Peap
Define the Peap (Protected Extensible Authentication Protocol) mode. Authenticates LAN clients without the need for client certificates. Developed by Microsoft, Cisco and RSA Security.
Requires user role: ADMIN, USER Default value: On
USAGE: xConfiguration Network n IEEE8021X Eap Peap: Peap where n: Index that identifies the network. Range: 1..1 Peap: Off/On Off: The EAP-PEAP protocol is disabled. On: The EAP-PEAP protocol is enabled (default).

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xConfiguration Network [1] IPStack
Select if the system should use IPv4, IPv6, or dual IP stack, on the network interface. NOTE: After changing this setting you may have to wait up to 30 seconds before it takes effect.
Requires user role: ADMIN, USER Default value: Dual
USAGE: xConfiguration Network n IPStack: IPStack where n: Index that identifies the network. Range: 1..1 IPStack: Dual/IPv4/IPv6 Dual: When set to Dual, the network interface can operate on both IP versions at the same time, and can have both an IPv4 and an IPv6 address at the same time. IPv4: When set to IPv4, the system will use IPv4 on the network interface. IPv6: When set to IPv6, the system will use IPv6 on the network interface.
xConfiguration Network [1] IPv4 Assignment
Define how the system will obtain its IPv4 address, subnet mask and gateway address. This setting applies only to systems on IPv4 networks.
Requires user role: ADMIN, USER Default value: DHCP
USAGE: xConfiguration Network n IPv4 Assignment: Assignment where n: Index that identifies the network. Range: 1..1 Assignment: Static/DHCP Static: The addresses must be configured manually using the Network IPv4 Address, Network IPv4 Gateway and Network IPv4 SubnetMask settings (static addresses). DHCP: The system addresses are automatically assigned by the DHCP server.

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration Network [1] IPv4 Address
Define the static IPv4 network address for the system. Applicable only when Network IPv4 Assignment is set to Static.
Requires user role: ADMIN, USER Default value: ""
USAGE: xConfiguration Network n IPv4 Address: "Address" where n: Index that identifies the network. Range: 1..1 Address: String (0, 64) A valid IPv4 address.
xConfiguration Network [1] IPv4 Gateway
Define the IPv4 network gateway address. Applicable only when the Network IPv4 Assignment is set to Static.
Requires user role: ADMIN, USER Default value: ""
USAGE: xConfiguration Network n IPv4 Gateway: "Gateway" where n: Index that identifies the network. Range: 1..1 Gateway: String (0, 64) A valid IPv4 address.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration Network [1] IPv4 SubnetMask
Define the IPv4 network subnet mask. Applicable only when the Network IPv4 Assignment is set to Static.
Requires user role: ADMIN, USER Default value: ""
USAGE: xConfiguration Network n IPv4 SubnetMask: "SubnetMask" where n: Index that identifies the network. Range: 1..1 SubnetMask: String (0, 64) A valid IPv4 address.
xConfiguration Network [1] IPv6 Assignment
Define how the system will obtain its IPv6 address and the default gateway address. This setting applies only to systems on IPv6 networks.
Requires user role: ADMIN, USER Default value: Autoconf
USAGE: xConfiguration Network n IPv6 Assignment: Assignment where n: Index that identifies the network. Range: 1..1 Assignment: Static/DHCPv6/Autoconf Static: The codec and gateway IP addresses must be configured manually using the Network IPv6 Address and Network IPv6 Gateway settings. The options, for example NTP and DNS server addresses, must either be set manually or obtained from a DHCPv6 server. The Network IPv6 DHCPOptions setting determines which method to use.
DHCPv6: All IPv6 addresses, including options, will be obtained from a DHCPv6 server. See RFC 3315 for a detailed description. The Network IPv6 DHCPOptions setting will be ignored.
Autoconf: Enable IPv6 stateless autoconfiguration of the IPv6 network interface. See RFC 4862 for a detailed description. The options, for example NTP and DNS server addresses, must either be set manually or obtained from a DHCPv6 server. The Network IPv6 DHCPOptions setting determines which method to use.

xConfiguration Network [1] IPv6 Address
Define the static IPv6 network address for the system. Applicable only when the Network IPv6 Assignment is set to Static.
Requires user role: ADMIN, USER Default value: ""
USAGE: xConfiguration Network n IPv6 Address: "Address" where n: Index that identifies the network. Range: 1..1 Address: String (0, 64) A valid IPv6 address including a network mask. Example: 2001:DB8::/48
xConfiguration Network [1] IPv6 Gateway
Define the IPv6 network gateway address. This setting is only applicable when the Network IPv6 Assignment is set to Static.
Requires user role: ADMIN, USER Default value: ""
USAGE: xConfiguration Network n IPv6 Gateway: "Gateway" where n: Index that identifies the network. Range: 1..1 Gateway: String (0, 64) A valid IPv6 address.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration Network [1] IPv6 DHCPOptions
Retrieve a set of DHCP options, for example NTP and DNS server addresses, from a DHCPv6 server.
Requires user role: ADMIN, USER Default value: On
USAGE: xConfiguration Network n IPv6 DHCPOptions: DHCPOptions where n: Index that identifies the network. Range: 1..1 DHCPOptions: Off/On Off: Disable the retrieval of DHCP options from a DHCPv6 server. On: Enable the retrieval of a selected set of DHCP options from a DHCPv6 server.
xConfiguration Network [1] MTU
Define the Ethernet MTU (Maximum Transmission Unit) size. The MTU size must be supported by your network infrastructure. The minimum size is 576 for IPv4 and 1280 for IPv6.
Requires user role: ADMIN, USER Default value: 1500
USAGE: xConfiguration Network n MTU: MTU where n: Index that identifies the network. Range: 1..1 MTU: Integer (576..1500) Set a value for the MTU (bytes).

xConfiguration Network [1] QoS Mode
The QoS (Quality of Service) is a method which handles the priority of audio, video and data in the network. The QoS settings must be supported by the infrastructure. Diffserv (Differentiated Services) is a computer networking architecture that specifies a simple, scalable and coarsegrained mechanism for classifying, managing network traffic and providing QoS priorities on modern IP networks.
Requires user role: ADMIN, USER Default value: Diffserv
USAGE: xConfiguration Network n QoS Mode: Mode where n: Index that identifies the network. Range: 1..1 Mode: Off/Diffserv Off: No QoS method is used.
Diffserv: When you set the QoS Mode to Diffserv, the Network QoS Diffserv Audio, Network QoS Diffserv Video, Network QoS Diffserv Data, Network QoS Diffserv Signalling, Network QoS Diffserv ICMPv6 and Network QoS Diffserv NTP settings are used to prioritize packets.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xConfiguration Network [1] QoS Diffserv Audio
This setting will only take effect if Network QoS Mode is set to Diffserv. Define which priority Audio packets should have in the IP network. The priority for the packets ranges from 0 to 63 - the higher the number, the higher the priority. The recommended class for Audio is CS4, which equals the decimal value 32. If in doubt, contact your network administrator. The priority set here might be overridden when packets are leaving the network controlled by the local network administrator.
Requires user role: ADMIN, USER Default value: 0
USAGE: xConfiguration Network n QoS Diffserv Audio: Audio where n: Index that identifies the network. Range: 1..1 Audio: Integer (0..63) Set the priority of the audio packets in the IP network - the higher the number, the higher the priority. The default value is 0 (best effort).

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration Network [1] QoS Diffserv Video
This setting will only take effect if Network QoS Mode is set to Diffserv. Define which priority Video packets should have in the IP network. The packets on the presentation channel (shared content) are also in the Video packet category. The priority for the packets ranges from 0 to 63 - the higher the number, the higher the priority. The recommended class for Video is CS4, which equals the decimal value 32. If in doubt, contact your network administrator. The priority set here might be overridden when packets are leaving the network controlled by the local network administrator.
Requires user role: ADMIN, USER Default value: 0
USAGE: xConfiguration Network n QoS Diffserv Video: Video where n: Index that identifies the network. Range: 1..1 Video: Integer (0..63) Set the priority of the video packets in the IP network - the higher the number, the higher the priority. The default value is 0 (best effort).

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration Network [1] QoS Diffserv Data
This setting will only take effect if Network QoS Mode is set to Diffserv. Define which priority Data packets should have in the IP network. The priority for the packets ranges from 0 to 63 - the higher the number, the higher the priority. The recommended value for Data is 0, which means best effort. If in doubt, contact your network administrator. The priority set here might be overridden when packets are leaving the network controlled by the local network administrator.
Requires user role: ADMIN, USER Default value: 0
USAGE: xConfiguration Network n QoS Diffserv Data: Data where n: Index that identifies the network. Range: 1..1 Data: Integer (0..63) Set the priority of the data packets in the IP network - the higher the number, the higher the priority. The default value is 0 (best effort).

xConfiguration Network [1] QoS Diffserv Signalling
This setting will only take effect if Network QoS Mode is set to Diffserv. Define which priority Signalling packets that are deemed critical (time-sensitive) for the realtime operation should have in the IP network. The priority for the packets ranges from 0 to 63 - the higher the number, the higher the priority. The recommended class for Signalling is CS3, which equals the decimal value 24. If in doubt, contact your network administrator. The priority set here might be overridden when packets are leaving the network controlled by the local network administrator.
Requires user role: ADMIN, USER Default value: 0
USAGE: xConfiguration Network n QoS Diffserv Signalling: Signalling where n: Index that identifies the network. Range: 1..1 Signalling: Integer (0..63) Set the priority of the signalling packets in the IP network - the higher the number, the higher the priority. The default value is 0 (best effort).

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration Network [1] QoS Diffserv ICMPv6
This setting will only take effect if Network QoS Mode is set to Diffserv. Define which priority ICMPv6 packets should have in the IP network. The priority for the packets ranges from 0 to 63 - the higher the number, the higher the priority. The recommended value for ICMPv6 is 0, which means best effort. If in doubt, contact your network administrator. The priority set here might be overridden when packets are leaving the network controlled by the local network administrator.
Requires user role: ADMIN, USER Default value: 0
USAGE: xConfiguration Network n QoS Diffserv ICMPv6: ICMPv6 where n: Index that identifies the network. Range: 1..1 ICMPv6: Integer (0..63) Set the priority of the ICMPv6 packets in the IP network - the higher the number, the higher the priority. The default value is 0 (best effort).

xConfiguration Network [1] QoS Diffserv NTP
This setting will only take effect if Network QoS Mode is set to Diffserv. Define which priority NTP packets should have in the IP network. The priority for the packets ranges from 0 to 63 - the higher the number, the higher the priority. The recommended value for NTP is 0, which means best effort. If in doubt, contact your network administrator. The priority set here might be overridden when packets are leaving the network controlled by the local network administrator.
Requires user role: ADMIN, USER Default value: 0
USAGE: xConfiguration Network n QoS Diffserv NTP: NTP where n: Index that identifies the network. Range: 1..1 NTP: Integer (0..63) Set the priority of the NTP packets in the IP network - the higher the number, the higher the priority. The default value is 0 (best effort).
xConfiguration Network [1] RemoteAccess Allow
Define which IP addresses (IPv4/IPv6) are allowed for remote access to the codec from SSH/ Telnet/HTTP/HTTPS. Multiple IP addresses are separated by a white space. A network mask (IP range) is specified by <ip address>/N, where N is 1-32 for IPv4, and N is 1-128 for IPv6. The /N is a common indication of a network mask where the first N bits are set. Thus 192.168.0.0/24 would match any address starting with 192.168.0, since these are the first 24 bits in the address.
Requires user role: ADMIN, USER Default value: ""
USAGE: xConfiguration Network n RemoteAccess Allow: "Allow" where n: Index that identifies the network. Range: 1..1 Allow: String (0, 255) A valid IPv4 address or IPv6 address.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xConfiguration Network [1] Speed
Define the Ethernet link speed. We recommend not to change from the default value, which negotiates with the network to set the speed automatically. If you do not use autonegotiation, make sure that the speed you choose is supported by the closest switch in your network infrastructure.
Requires user role: ADMIN, USER Default value: Auto
USAGE: xConfiguration Network n Speed: Speed where n: Index that identifies the network. Range: 1..1 Speed: Auto/10half/10full/100half/100full/1000full Auto: Autonegotiate link speed.
10half: Force link to 10 Mbps half-duplex.
10full: Force link to 10 Mbps full-duplex.
100half: Force link to 100 Mbps half-duplex.
100full: Force link to 100 Mbps full-duplex.
1000full: Force link to 1 Gbps full-duplex.

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration Network [1] VLAN Voice Mode
Define the VLAN voice mode. The VLAN Voice Mode will be set to Auto automatically if you have Cisco UCM (Cisco Unified Communications Manager) as provisioning infrastructure. Note that Auto mode will NOT work if the NetworkServices CDP Mode setting is Off.
Requires user role: ADMIN, USER Default value: Auto
USAGE: xConfiguration Network n VLAN Voice Mode: Mode where n: Index that identifies the network. Range: 1..1 Mode: Auto/Manual/Off Auto: The Cisco Discovery Protocol (CDP), if available, assigns an id to the voice VLAN. If CDP is not available, VLAN is not enabled.
Manual: The VLAN ID is set manually using the Network VLAN Voice VlanId setting. If CDP is available, the manually set value will be overruled by the value assigned by CDP.
Off: VLAN is not enabled.
xConfiguration Network [1] VLAN Voice VlanId
Define the VLAN voice ID. This setting will only take effect if Network VLAN Voice Mode is set to Manual.
Requires user role: ADMIN, USER Default value: 1
USAGE: xConfiguration Network n VLAN Voice VlanId: VlanId where n: Index that identifies the network. Range: 1..1 VlanId: Integer (1..4094) Set the VLAN voice ID.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

NetworkServices configuration
xConfiguration NetworkServices CDP Mode
Enable or disable the CDP (Cisco Discovery Protocol) daemon. Enabling CDP will make the endpoint report certain statistics and device identifiers to a CDP-enabled switch. If CDP is disabled, the Network VLAN Voice Mode: Auto setting will not work.
Requires user role: ADMIN Default value: On
USAGE: xConfiguration NetworkServices CDP Mode: Mode where Mode: Off/On Off: The CDP daemon is disabled. On: The CDP daemon is enabled.
xConfiguration NetworkServices H323 Mode
Define whether the system should be able to place and receive H.323 calls or not.
Requires user role: ADMIN Default value: On
USAGE: xConfiguration NetworkServices H323 Mode: Mode where Mode: Off/On Off: Disable the possibility to place and receive H.323 calls. On: Enable the possibility to place and receive H.323 calls (default).

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration NetworkServices HTTP Mode
Define whether or not to allow access to the video system using the HTTP or HTTPS (HTTP Secure) protocols. Note that the video system's web interface use HTTP or HTTPS. If this setting is switched Off, you cannot use the web interface. If you need extra security (encryption and decryption of requests, and pages that are returned by the web server), allow only HTTPS.
Requires user role: ADMIN Default value: HTTP+HTTPS
USAGE: xConfiguration NetworkServices HTTP Mode: Mode where Mode: Off/HTTP+HTTPS/HTTPS Off: Access to the video system not allowed via HTTP or HTTPS. HTTP+HTTPS: Access to the video system allowed via both HTTP and HTTPS. HTTPS: Access to the video system allowed via HTTPS, but not via HTTP.
xConfiguration NetworkServices HTTPS Server MinimumTLSVersion
Set the lowest version of the TLS (Transport Layer Security) protocol that is allowed.
Requires user role: ADMIN Default value: TLSv1.1
USAGE: xConfiguration NetworkServices HTTPS Server MinimumTLSVersion: MinimumTLSVersion where MinimumTLSVersion: TLSv1.1/TLSv1.2 TLSv1.1: Support of TLS version 1.1 or higher. TLSv1.2: Support of TLS version 1.2 or higher.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration NetworkServices HTTPS StrictTransportSecurity
The HTTP Strict Transport Security header lets a web site inform the browser that it should never load the site using HTTP and should automatically convert all attempts to access the site using HTTP to HTTPS requests instead.
Requires user role: ADMIN Default value: Off
USAGE: xConfiguration NetworkServices HTTPS StrictTransportSecurity : where : Off/On Off: The HTTP strict transport security feature is disabled.
On: The HTTP strict transport security feature is enabled.
xConfiguration NetworkServices HTTPS VerifyServerCertificate
When the video system connects to an external HTTPS server (like a phone book server or an external manager), this server will present a certificate to the video system to identify itself.
Requires user role: ADMIN Default value: Off
USAGE: xConfiguration NetworkServices HTTPS VerifyServerCertificate: VerifyServerCertificate where VerifyServerCertificate: Off/On Off: Do not verify server certificates.
On: Requires the system to verify that the server certificate is signed by a trusted Certificate Authority (CA). This requires that a list of trusted CAs are uploaded to the system in advance.

xConfiguration NetworkServices HTTPS VerifyClientCertificate
When the video system connects to a HTTPS client (like a web browser), the client can be asked to present a certificate to the video system to identify itself.
Requires user role: ADMIN Default value: Off
USAGE: xConfiguration NetworkServices HTTPS VerifyClientCertificate: VerifyClientCertificate where VerifyClientCertificate: Off/On Off: Do not verify client certificates.
On: Requires the client to present a certificate that is signed by a trusted Certificate Authority (CA). This requires that a list of trusted CAs are uploaded to the system in advance.
xConfiguration NetworkServices NTP Mode
The Network Time Protocol (NTP) is used to synchronize the system's time and date to a reference time server. The time server will be queried regularly for time updates.
Requires user role: ADMIN Default value: Auto
USAGE: xConfiguration NetworkServices NTP Mode: Mode where Mode: Auto/Manual/Off Auto: The system will use an NTP server for time reference. As default, the server address will be obtained from the network's DHCP server. If a DHCP server is not used, or if the DHCP server does not provide an NTP server address, the NTP server address that is specified in the NetworkServices NTP Server [n] Address setting will be used.
Manual: The system will use the NTP server that is specified in the NetworkServices NTP Server [n] Address setting for time reference.
Off: The system will not use an NTP server. The NetworkServices NTP Server [n] Address setting will be ignored.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xConfiguration NetworkServices NTP Server [1..3] Address
The address of the NTP server that will be used when NetworkServices NTP Mode is set to Manual, and when NetworkServices NTP Mode is set to Auto and no address is supplied by a DHCP server.
Requires user role: ADMIN Default value: 0.tandberg.pool.ntp.org
USAGE: xConfiguration NetworkServices NTP Server n Address: "Address" where n: Unique ID that identifies the NTP server. Range: 1..3 Address: String (0, 255) A valid IPv4 address, IPv6 address or DNS name.
xConfiguration NetworkServices SIP Mode
Define whether the system should be able to place and receive SIP calls or not.
Requires user role: ADMIN Default value: On
USAGE: xConfiguration NetworkServices SIP Mode: Mode where Mode: Off/On Off: Disable the possibility to place and receive SIP calls. On: Enable the possibility to place and receive SIP calls (default).

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration NetworkServices SNMP Mode
SNMP (Simple Network Management Protocol) is used in network management systems to monitor network-attached devices (routers, servers, switches, projectors, etc) for conditions that warrant administrative attention. SNMP exposes management data in the form of variables on the managed systems, which describe the system configuration. These variables can then be queried (set to ReadOnly) and sometimes set (set to ReadWrite) by managing applications.
Requires user role: ADMIN Default value: ReadOnly
USAGE: xConfiguration NetworkServices SNMP Mode: Mode where Mode: Off/ReadOnly/ReadWrite Off: Disable the SNMP network service.
ReadOnly: Enable the SNMP network service for queries only.
ReadWrite: Enable the SNMP network service for both queries and commands.
xConfiguration NetworkServices SNMP Host [1..3] Address
Define the address of up to three SNMP Managers. The system's SNMP Agent (in the codec) responds to requests from SNMP Managers (a PC program etc.), for example about system location and system contact. SNMP traps are not supported.
Requires user role: ADMIN Default value: ""
USAGE: xConfiguration NetworkServices SNMP Host n Address: "Address" where n: Identifies the SNMP host. Maximum three SNMP hosts are allowed. Range: 1..3 Address: String (0, 255) A valid IPv4 address, IPv6 address or DNS name.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration NetworkServices SNMP CommunityName
Define the name of the Network Services SNMP Community. SNMP Community names are used to authenticate SNMP requests. SNMP requests must have a password (case sensitive) in order to receive a response from the SNMP Agent in the codec. The default password is "public". If you have the Cisco TelePresence Management Suite (TMS) you must make sure the same SNMP Community is configured there too. NOTE: The SNMP Community password is case sensitive.
Requires user role: ADMIN Default value: ""
USAGE: xConfiguration NetworkServices SNMP CommunityName: "CommunityName" where CommunityName: String (0, 50) The SNMP community name.
xConfiguration NetworkServices SNMP SystemContact
Define the name of the Network Services SNMP System Contact.
Requires user role: ADMIN Default value: ""
USAGE: xConfiguration NetworkServices SNMP SystemContact: "SystemContact" where SystemContact: String (0, 50) The name of the SNMP system contact.

xConfiguration NetworkServices SNMP SystemLocation
Define the name of the Network Services SNMP System Location.
Requires user role: ADMIN Default value: ""
USAGE: xConfiguration NetworkServices SNMP SystemLocation: "SystemLocation" where SystemLocation: String (0, 50) The name of the SNMP system location.
xConfiguration NetworkServices SSH Mode
SSH (or Secure Shell) protocol can provide secure encrypted communication between the codec and your local computer.
Requires user role: ADMIN Default value: On
USAGE: xConfiguration NetworkServices SSH Mode: Mode where Mode: Off/On Off: The SSH protocol is disabled. On: The SSH protocol is enabled.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration NetworkServices Telnet Mode
Telnet is a network protocol used on the Internet or Local Area Network (LAN) connections.
Requires user role: ADMIN Default value: Off
USAGE: xConfiguration NetworkServices Telnet Mode: Mode where Mode: Off/On Off: The Telnet protocol is disabled. This is the factory setting.
On: The Telnet protocol is enabled.
xConfiguration NetworkServices UPnP Mode
Fully disable UPnP (Universal Plug and Play), or enable UPnP for a short time period after the video system has been switched on or restarted. The default operation is that UPnP is enabled when you switch on or restart the video system. Then UPnP is automatically disabled after the timeout period that is defined in the NetworkServices UPnP Timeout setting. Use the video system's web interface to set the timeout. When UPnP is enabled, the video system advertises its presence on the network. The advertisement permits a Touch controller to discover video systems automatically, and you do not need to manually enter the video system's IP address in order to pair the Touch controller.
Requires user role: ADMIN Default value: On
USAGE: xConfiguration NetworkServices UPnP Mode: Mode where Mode: <Off/On> Off: UPnP is disabled. The video system does not advertise its presence, and you have to enter the video system's IP address manually in order to pair a Touch controller to the video system.
On: UPnP is enabled. The video system advertises its presence until the timeout period expires.

xConfiguration NetworkServices WelcomeText
Choose which information the user should see when logging on to the codec through Telnet/ SSH.
Requires user role: ADMIN Default value: On
USAGE: xConfiguration NetworkServices WelcomeText: WelcomeText where WelcomeText: Off/On Off: The welcome text is: Login successful
On: The welcome text is: Welcome to <system name>; Software version; Software release date; Login successful.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Peripherals configuration
xConfiguration Peripherals Profile Cameras
Define the number of cameras that are expected to be connected to the video system. This information is used by the video system's diagnostics service. If the number of connected cameras does not match this setting, the diagnostics service will report it as an inconsistency.
Requires user role: ADMIN, INTEGRATOR Default value: Minimum1
USAGE: xConfiguration Peripherals Profile Cameras: Cameras where Cameras: NotSet/Minimum1/0/1/2/3/4/5/6/7 NotSet: No camera check is performed. Minimum1: At least one camera should be connected to the video system. 0-7: Select the number of cameras that are expected to be connected to the video system.

xConfiguration Peripherals Profile ControlSystems
Define if a third-party control system, for example Crestron or AMX, is expected to be connected to the video system. This information is used by the video system's diagnostics service. If the number of connected control systems does not match this setting, the diagnostics service will report it as an inconsistency. Note that only one third-party control system is supported. If set to 1, the control system must send heart beats to the video system using xCommand Peripherals Pair and HeartBeat commands. Failing to do so will cause the in-room control extensions to show a warning that the video system has lost connectivity to the control system.
Requires user role: ADMIN, INTEGRATOR Default value: NotSet
USAGE: xConfiguration Peripherals Profile ControlSystems: ControlSystems where ControlSystems: 1/NotSet 1: One third-party control system should be connected to the video system.
NotSet: No check for a third-party control system is performed.
xConfiguration Peripherals Profile TouchPanels
Define the number of touch panels that are expected to be connected to the video system. This information is used by the video system's diagnostics service. If the number of connected touch panels does not match this setting, the diagnostics service will report it as an inconsistency. Note that only one Cisco Touch controller is supported in this version.
Requires user role: ADMIN, INTEGRATOR Default value: NotSet
USAGE: xConfiguration Peripherals Profile TouchPanels: TouchPanels where TouchPanels: NotSet/Minimum1/0/1/2/3/4/5 NotSet: No touch panel check is performed.
Minimum1: At least one touch panel should be connected to the video system.
0-5: Select the number of Touch controllers that are expected to be connected to the video system.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Phonebook configuration
xConfiguration Phonebook Server [1] ID
Define a name for the external phone book.
Requires user role: ADMIN Default value: ""
USAGE: xConfiguration Phonebook Server n ID: "ID" where n: Unique ID that identifies the phonebook server. Range: 1..1 ID: String (0, 64) The name for the external phone book.
xConfiguration Phonebook Server [1] Type
Select the phonebook server type.
Requires user role: ADMIN Default value: Off
USAGE: xConfiguration Phonebook Server n Type: Type where n: Unique ID that identifies the phonebook server. Range: 1..1 Type: Off/CUCM/Spark/TMS/VCS Off: Do not use a phonebook. CUCM: The phonebook is located on the Cisco Unified Communications Manager. Spark: The phonebook is located on Spark. TMS: The phonebook is located on the Cisco TelePresence Management Suite server. VCS: The phonebook is located on the Cisco TelePresence Video Communication Server.

xConfiguration Phonebook Server [1] URL
Define the address (URL) to the external phone book server.
Requires user role: ADMIN Default value: ""
USAGE: xConfiguration Phonebook Server n URL: "URL" where n: Unique ID that identifies the phonebook server. Range: 1..1 URL: String (0, 255) A valid address (URL) to the phone book server.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Provisioning configuration
xConfiguration Provisioning Connectivity
This setting controls how the device discovers whether it should request an internal or external configuration from the provisioning server.
Requires user role: ADMIN, USER Default value: Auto
USAGE: xConfiguration Provisioning Connectivity: Connectivity where Connectivity: Internal/External/Auto Internal: Request internal configuration. External: Request external configuration. Auto: Automatically discover using NAPTR queries whether internal or external configurations should be requested. If the NAPTR responses have the "e" flag, external configurations will be requested. Otherwise internal configurations will be requested.

xConfiguration Provisioning Mode
It is possible to configure a video system using a provisioning system (external manager). This allows video conferencing network administrators to manage many video systems simultaneously. With this setting you choose which type of provisioning system to use. Provisioning can also be switched off. Contact your provisioning system provider/representative for more information.
Requires user role: ADMIN, USER Default value: Auto
USAGE: xConfiguration Provisioning Mode: Mode where Mode: Off/Auto/CUCM/Edge/Spark/TMS/VCS Off: The video system is not configured by a provisioning system.
Auto: Automatically select the provisioning server.
CUCM: Push configurations to the video system from CUCM (Cisco Unified Communications Manager).
Edge: Push configurations to the video system from CUCM (Cisco Unified Communications Manager). The system connects to CUCM via the Collaboration Edge infrastructure.
Spark: Push configurations to the video system from Spark.
TMS: Push configurations to the video system from TMS (Cisco TelePresence Management System).
VCS: Push configurations to the video system from VCS (Cisco TelePresence Video Communication Server).

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xConfiguration Provisioning LoginName
This is the username part of the credentials used to authenticate the video system with the provisioning server. This setting must be used when required by the provisioning server.
Requires user role: ADMIN, USER Default value: ""
USAGE: xConfiguration Provisioning LoginName: "LoginName" where LoginName: String (0, 80) A valid username.
xConfiguration Provisioning Password
This is the password part of the credentials used to authenticate the video system with the provisioning server. This setting must be used when required by the provisioning server.
Requires user role: ADMIN, USER Default value: ""
USAGE: xConfiguration Provisioning Password: "Password" where Password: String (0, 64) A valid password.

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration Provisioning HttpMethod
Select the HTTP method to be used for the provisioning.
Requires user role: ADMIN, USER Default value: POST
USAGE: xConfiguration Provisioning HttpMethod: HttpMethod where HttpMethod: GET/POST GET: Select GET when the provisioning server supports GET.
POST: Select POST when the provisioning server supports POST.
xConfiguration Provisioning ExternalManager Address
Define the IP Address or DNS name of the external manager / provisioning system. If an External Manager Address (and Path) is configured, the system will send a message to this address when starting up. When receiving this message the external manager / provisioning system can return configurations/commands to the unit as a result. When using CUCM or TMS provisioning, the DHCP server can be set up to provide the external manager address automatically (DHCP Option 242 for TMS, and DHCP Option 150 for CUCM). An address set in the Provisioning ExternalManager Address setting will override the address provided by DHCP.
Requires user role: ADMIN, USER Default value: ""
USAGE: xConfiguration Provisioning ExternalManager Address: "Address" where Address: String (0, 64) A valid IPv4 address, IPv6 address or DNS name.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration Provisioning ExternalManager AlternateAddress
Only applicable when the endpoint is provisioned by Cisco Unified Communication Manager (CUCM) and an alternate CUCM is available for redundancy. Define the address of the alternate CUCM. If the main CUCM is not available, the endpoint will be provisioned by the alternate CUCM. When the main CUCM is available again, the endpoint will be provisioned by this CUCM.
Requires user role: ADMIN, USER Default value: ""
USAGE: xConfiguration Provisioning ExternalManager AlternateAddress: "AlternateAddress" where AlternateAddress: String (0, 64) A valid IPv4 address, IPv6 address or DNS name.
xConfiguration Provisioning ExternalManager Protocol
Define whether to use the HTTP (unsecure communication) or HTTPS (secure communication) protocol when sending requests to the external manager / provisioning system. The selected protocol must be enabled in the NetworkServices HTTP Mode setting.
Requires user role: ADMIN, USER Default value: HTTP
USAGE: xConfiguration Provisioning ExternalManager Protocol: Protocol where Protocol: HTTPS/HTTP HTTPS: Send requests via HTTPS. HTTP: Send requests via HTTP.

xConfiguration Provisioning ExternalManager Path
Define the Path to the external manager / provisioning system. This setting is required when several management services reside on the same server, i.e. share the same External Manager address.
Requires user role: ADMIN, USER Default value: ""
USAGE: xConfiguration Provisioning ExternalManager Path: "Path" where Path: String (0, 255) A valid path to the external manager or provisioning system.
xConfiguration Provisioning ExternalManager Domain
Define the SIP domain for the VCS provisioning server.
Requires user role: ADMIN, USER Default value: ""
USAGE: xConfiguration Provisioning ExternalManager Domain: "Domain" where Domain: String (0, 64) A valid domain name.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Proximity configuration
xConfiguration Proximity Mode
Determine whether the video system will emit ultrasound pairing messages or not. When the video system emits ultrasound, Proximity clients can detect that they are close to the video system. In order to use a client, at least one of the Proximity services must be enabled (refer to the Proximity Services settings). In general, Cisco recommends enabling all the Proximity services.
Requires user role: ADMIN, USER Default value: Off
USAGE: xConfiguration Proximity Mode: Mode where Mode: Off/On Off: The video system does not emit ultrasound, and Proximity services cannot be used. On: The video system emits ultrasound, and Proximity clients can detect that they are close to the video system. Enabled Proximity services can be used.
xConfiguration Proximity Services CallControl
Enable or disable basic call control features on Proximity clients. When this setting is enabled, you are able to control a call using a Proximity client (for example dial, mute, adjust volume and hang up). This service is supported by mobile devices (iOS and Android). Proximity Mode must be On for this setting to take any effect.
Requires user role: ADMIN, USER Default value: Disabled
USAGE: xConfiguration Proximity Services CallControl: CallControl where CallControl: Enabled/Disabled Enabled: Call control from a Proximity client is enabled. Disabled: Call control from a Proximity client is disabled.

xConfiguration Proximity Services ContentShare FromClients
Enable or disable content sharing from Proximity clients. When this setting is enabled, you can share content from a Proximity client wirelessly on the video system, e.g. share your laptop screen. This service is supported by laptops (OS X and Windows). Proximity Mode must be On for this setting to take any effect.
Requires user role: ADMIN, USER Default value: Enabled
USAGE: xConfiguration Proximity Services ContentShare FromClients: FromClients where FromClients: Enabled/Disabled Enabled: Content sharing from a Proximity client is enabled.
Disabled: Content sharing from a Proximity client is disabled.
xConfiguration Proximity Services ContentShare ToClients
Enable or disable content sharing to Proximity clients. When enabled, Proximity clients will receive the presentation from the video system. You can zoom in on details, view previous content and take snapshots. This service is supported by mobile devices (iOS and Android). Proximity Mode must be On for this setting to take any effect.
Requires user role: ADMIN, USER Default value: Disabled
USAGE: xConfiguration Proximity Services ContentShare ToClients: ToClients where ToClients: Enabled/Disabled Enabled: Content sharing to a Proximity client is enabled.
Disabled: Content sharing to a Proximity client is disabled.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

SerialPort configuration
xConfiguration SerialPort Mode
Enable/disable the serial port (connection via USB and RS-232 adapter).
Requires user role: ADMIN, INTEGRATOR Default value: On
USAGE: xConfiguration SerialPort Mode: Mode where Mode: Off/On Off: Disable the serial port. On: Enable the serial port.
xConfiguration SerialPort BaudRate
Define the baud rate (data transmission rate, bits per second) for the serial port. Other connection parameters for the serial port are: Data bits: 8; Parity: None; Stop bits: 1; Flow control: None.
Requires user role: ADMIN, INTEGRATOR Default value: 38400
USAGE: xConfiguration SerialPort BaudRate: BaudRate where BaudRate: 9600/19200/38400/57600/115200 Set a baud rate from the baud rates listed (bps).

xConfiguration SerialPort LoginRequired
Define if login shall be required when connecting to the serial port.
Requires user role: ADMIN Default value: On
USAGE: xConfiguration SerialPort LoginRequired: LoginRequired where LoginRequired: Off/On Off: The user can access the codec via the serial port without any login. On: Login is required when connecting to the codec via the serial port.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

SIP configuration
xConfiguration SIP Authentication UserName
This is the user name part of the credentials used to authenticate towards the SIP proxy.
Requires user role: ADMIN Default value: ""
USAGE: xConfiguration SIP Authentication UserName: "UserName" where UserName: String (0, 128) A valid username.
xConfiguration SIP Authentication Password
This is the password part of the credentials used to authenticate towards the SIP proxy.
Requires user role: ADMIN Default value: ""
USAGE: xConfiguration SIP Authentication Password: "Password" where Password: String (0, 128) A valid password.

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration SIP DefaultTransport
Select the transport protocol to be used over the LAN.
Requires user role: ADMIN Default value: Auto
USAGE: xConfiguration SIP DefaultTransport: DefaultTransport where DefaultTransport: TCP/UDP/Tls/Auto TCP: The system will always use TCP as the default transport method. UDP: The system will always use UDP as the default transport method. Tls: The system will always use TLS as the default transport method. For TLS connections a SIP CA-list can be uploaded to the video system. If no such CA-list is available on the system then anonymous Diffie Hellman will be used. Auto: The system will try to connect using transport protocols in the following order: TLS, TCP, UDP.
xConfiguration SIP DisplayName
When configured the incoming call will report the display name instead of the SIP URI.
Requires user role: ADMIN Default value: ""
USAGE: xConfiguration SIP DisplayName: "DisplayName" where DisplayName: String (0, 550) The name to be displayed instead of the SIP URI.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration SIP Ice Mode
ICE (Interactive Connectivity Establishment, RFC 5245) is a NAT traversal solution that the video systems can use to discover the optimized media path. Thus the shortest route for audio and video is always secured between the video systems.
Requires user role: ADMIN Default value: Auto
USAGE: xConfiguration SIP Ice Mode: Mode where Mode: Auto/Off/On Auto: ICE is enabled if a TURN server is provided, otherwise ICE is disabled. Off: ICE is disabled. On: ICE is enabled.
xConfiguration SIP Ice DefaultCandidate
The ICE protocol needs some time to reach a conclusion about which media route to use (up to the first 5 seconds of a call). During this period media for the video system will be sent to the Default Candidate as defined in this setting.
Requires user role: ADMIN Default value: Host
USAGE: xConfiguration SIP Ice DefaultCandidate: DefaultCandidate where DefaultCandidate: Host/Rflx/Relay Host: Send media to the video system's private IP address. Rflx: Send media to the video system's public IP address, as seen by the TURN server. Relay: Send media to the IP address and port allocated on the TURN server.

xConfiguration SIP ListenPort
Turn on or off the listening for incoming connections on the SIP TCP/UDP ports. If turned off, the endpoint will only be reachable through the SIP registrar (CUCM or VCS).
Requires user role: ADMIN Default value: On
USAGE: xConfiguration SIP ListenPort: ListenPort where ListenPort: Off/On Off: Listening for incoming connections on the SIP TCP/UDP ports is turned off. On: Listening for incoming connections on the SIP TCP/UDP ports is turned on.
xConfiguration SIP Proxy [1..4] Address
The Proxy Address is the manually configured address for the outbound proxy. It is possible to use a fully qualified domain name, or an IP address. The default port is 5060 for TCP and UDP but another one can be provided.
Requires user role: ADMIN Default value: ""
USAGE: xConfiguration SIP Proxy n Address: "Address" where n: Index that identifies the proxy (maximum 4 proxys can be defined). Range: 1..4 Address: String (0, 255) A valid IPv4 address, IPv6 address or DNS name.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration SIP Turn Server
Define the address of the TURN (Traversal Using Relay NAT) server. It is used as a media relay fallback and it is also used to discover the endpoint's own public IP address.
Requires user role: ADMIN Default value: ""
USAGE: xConfiguration SIP Turn Server: "Server" where Server: String (0, 255) The preferred format is DNS SRV record (e.g. _turn._udp.<domain>), or it can be a valid IPv4 or IPv6 address.
xConfiguration SIP Turn UserName
Define the user name needed for accessing the TURN server.
Requires user role: ADMIN Default value: ""
USAGE: xConfiguration SIP Turn UserName: "UserName" where UserName: String (0, 128) A valid user name.
xConfiguration SIP Turn Password
Define the password needed for accessing the TURN server.
Requires user role: ADMIN Default value: ""
USAGE: xConfiguration SIP Turn Password: "Password" where Password: String (0, 128) A valid password.

xConfiguration SIP URI
The SIP URI (Uniform Resource Identifier) is the address that is used to identify the video system. The URI is registered and used by the SIP services to route inbound calls to the system. The SIP URI syntax is defined in RFC 3261.
Requires user role: ADMIN Default value: ""
USAGE: xConfiguration SIP URI: "URI" where URI: String (0, 255) An address (URI) that is compliant with the SIP URI syntax.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Standby configuration
xConfiguration Standby Control
Define whether the system should go into standby mode or not.
Requires user role: ADMIN, INTEGRATOR Default value: On
USAGE: xConfiguration Standby Control: Control where Control: Off/On Off: The system will not enter standby mode. On: The system will enter standby mode when the Standby Delay has timed out. Requires the Standby Delay to be set to an appropriate value.
xConfiguration Standby Delay
Define how long (in minutes) the system shall be in idle mode before it goes into standby mode. Requires the Standby Control to be enabled.
Requires user role: ADMIN, INTEGRATOR Default value: 10
USAGE: xConfiguration Standby Delay: Delay where Delay: Integer (1..480) Set the standby delay (minutes).

xConfiguration Standby BootAction
Define the camera position after a restart of the codec.
Requires user role: ADMIN, INTEGRATOR, USER Default value: RestoreCameraPosition
USAGE: xConfiguration Standby BootAction: BootAction where BootAction: None/DefaultCameraPosition/RestoreCameraPosition None: No action. RestoreCameraPosition: When the video system restarts, the camera returns to the position that it had before the restart. DefaultCameraPosition: When the video system restarts, the camera moves to the factory default position.
xConfiguration Standby StandbyAction
Define the camera position when going into standby mode.
Requires user role: ADMIN, INTEGRATOR Default value: PrivacyPosition
USAGE: xConfiguration Standby StandbyAction: StandbyAction where StandbyAction: None/PrivacyPosition None: No action. PrivacyPosition: When the video system enters standby, the camera turns to a sideways position for privacy.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration Standby WakeupAction
Define the camera position when leaving standby mode.
Requires user role: ADMIN, INTEGRATOR, USER Default value: RestoreCameraPosition
USAGE: xConfiguration Standby WakeupAction: WakeupAction where WakeupAction: None/RestoreCameraPosition/DefaultCameraPosition None: No action.
RestoreCameraPosition: When the video system leaves standby, the camera returns to the position that it had before entering standby.
DefaultCameraPosition: When the video system leaves standby, the camera moves to the factory default position.

SystemUnit configuration
xConfiguration SystemUnit Name
Define the system name. The system name will be sent as the hostname in a DHCP request and when the codec is acting as an SNMP Agent.
Requires user role: ADMIN Default value: ""
USAGE: xConfiguration SystemUnit Name: "Name" where Name: String (0, 50) Define the system name.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Time configuration
xConfiguration Time TimeFormat
Define the time format.
Requires user role: ADMIN, USER Default value: 24H
USAGE: xConfiguration Time TimeFormat: TimeFormat where TimeFormat: 24H/12H 24H: Set the time format to 24 hours. 12H: Set the time format to 12 hours (AM/PM).
xConfiguration Time DateFormat
Define the date format.
Requires user role: ADMIN, USER Default value: DD_MM_YY
USAGE: xConfiguration Time DateFormat: DateFormat where DateFormat: DD_MM_YY/MM_DD_YY/YY_MM_DD DD_MM_YY: The date January 30th 2010 will be displayed: 30.01.10 MM_DD_YY: The date January 30th 2010 will be displayed: 01.30.10 YY_MM_DD: The date January 30th 2010 will be displayed: 10.01.30

xConfiguration Time Zone
Define the time zone for the geographical location of the video system. The information in the value space is from the tz database, also called the IANA Time Zone Database.
Requires user role: ADMIN, INTEGRATOR, USER
Default value: Etc/UTC
USAGE:
xConfiguration Time Zone: Zone
where
Zone: Africa/Abidjan, Africa/Accra, Africa/Addis_Ababa, Africa/Algiers, Africa/Asmara, Africa/ Asmera, Africa/Bamako, Africa/Bangui, Africa/Banjul, Africa/Bissau, Africa/Blantyre, Africa/ Brazzaville, Africa/Bujumbura, Africa/Cairo, Africa/Casablanca, Africa/Ceuta, Africa/Conakry, Africa/Dakar, Africa/Dar_es_Salaam, Africa/Djibouti, Africa/Douala, Africa/El_Aaiun, Africa/ Freetown, Africa/Gaborone, Africa/Harare, Africa/Johannesburg, Africa/Juba, Africa/ Kampala, Africa/Khartoum, Africa/Kigali, Africa/Kinshasa, Africa/Lagos, Africa/Libreville, Africa/Lome, Africa/Luanda, Africa/Lubumbashi, Africa/Lusaka, Africa/Malabo, Africa/ Maputo, Africa/Maseru, Africa/Mbabane, Africa/Mogadishu, Africa/Monrovia, Africa/Nairobi, Africa/Ndjamena, Africa/Niamey, Africa/Nouakchott, Africa/Ouagadougou, Africa/PortoNovo, Africa/Sao_Tome, Africa/Timbuktu, Africa/Tripoli, Africa/Tunis, Africa/Windhoek, America/Adak, America/Anchorage, America/Anguilla, America/Antigua, America/Araguaina, America/Argentina/Buenos_Aires, America/Argentina/Catamarca, America/Argentina/ ComodRivadavia, America/Argentina/Cordoba, America/Argentina/Jujuy, America/Argentina/ La_Rioja, America/Argentina/Mendoza, America/Argentina/Rio_Gallegos, America/ Argentina/Salta, America/Argentina/San_Juan, America/Argentina/San_Luis, America/ Argentina/Tucuman, America/Argentina/Ushuaia, America/Aruba, America/Asuncion, America/Atikokan, America/Atka, America/Bahia, America/Bahia_Banderas, America/ Barbados, America/Belem, America/Belize, America/Blanc-Sablon, America/Boa_Vista, America/Bogota, America/Boise, America/Buenos_Aires, America/Cambridge_Bay, America/Campo_Grande, America/Cancun, America/Caracas, America/Catamarca, America/Cayenne, America/Cayman, America/Chicago, America/Chihuahua, America/ Coral_Harbour, America/Cordoba, America/Costa_Rica, America/Creston, America/Cuiaba, America/Curacao, America/Danmarkshavn, America/Dawson, America/Dawson_Creek, America/Denver, America/Detroit, America/Dominica, America/Edmonton, America/Eirunepe, America/El_Salvador, America/Ensenada, America/Fort_Nelson, America/Fort_Wayne, America/Fortaleza, America/Glace_Bay, America/Godthab, America/Goose_Bay, America/ Grand_Turk, America/Grenada, America/Guadeloupe, America/Guatemala, America/ Guayaquil, America/Guyana, America/Halifax, America/Havana, America/Hermosillo, America/Indiana/Indianapolis, America/Indiana/Knox, America/Indiana/Marengo, America/ Indiana/Petersburg, America/Indiana/Tell_City, America/Indiana/Vevay, America/Indiana/ Vincennes, America/Indiana/Winamac, America/Indianapolis, America/Inuvik, America/ Iqaluit, America/Jamaica, America/Jujuy, America/Juneau, America/Kentucky/Louisville, America/Kentucky/Monticello, America/Knox_IN, America/Kralendijk, America/La_Paz,

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

America/Lima, America/Los_Angeles, America/Louisville, America/Lower_Princes, America/ Maceio, America/Managua, America/Manaus, America/Marigot, America/Martinique, America/Matamoros, America/Mazatlan, America/Mendoza, America/Menominee, America/ Merida, America/Metlakatla, America/Mexico_City, America/Miquelon, America/Moncton, America/Monterrey, America/Montevideo, America/Montreal, America/Montserrat, America/ Nassau, America/New_York, America/Nipigon, America/Nome, America/Noronha, America/ North_Dakota/Beulah, America/North_Dakota/Center, America/North_Dakota/New_Salem, America/Ojinaga, America/Panama, America/Pangnirtung, America/Paramaribo, America/ Phoenix, America/Port-au-Prince, America/Port_of_Spain, America/Porto_Acre, America/ Porto_Velho, America/Puerto_Rico, America/Rainy_River, America/Rankin_Inlet, America/ Recife, America/Regina, America/Resolute, America/Rio_Branco, America/Rosario, America/ Santa_Isabel, America/Santarem, America/Santiago, America/Santo_Domingo, America/ Sao_Paulo, America/Scoresbysund, America/Shiprock, America/Sitka, America/St_ Barthelemy, America/St_Johns, America/St_Kitts, America/St_Lucia, America/St_Thomas, America/St_Vincent, America/Swift_Current, America/Tegucigalpa, America/Thule, America/Thunder_Bay, America/Tijuana, America/Toronto, America/Tortola, America/ Vancouver, America/Virgin, America/Whitehorse, America/Winnipeg, America/Yakutat, America/Yellowknife, Antarctica/Casey, Antarctica/Davis, Antarctica/DumontDUrville, Antarctica/Macquarie, Antarctica/Mawson, Antarctica/McMurdo, Antarctica/Palmer, Antarctica/Rothera, Antarctica/South_Pole, Antarctica/Syowa, Antarctica/Troll, Antarctica/ Vostok, Arctic/Longyearbyen, Asia/Aden, Asia/Almaty, Asia/Amman, Asia/Anadyr, Asia/ Aqtau, Asia/Aqtobe, Asia/Ashgabat, Asia/Ashkhabad, Asia/Baghdad, Asia/Bahrain, Asia/ Baku, Asia/Bangkok, Asia/Barnaul, Asia/Beirut, Asia/Bishkek, Asia/Brunei, Asia/Calcutta, Asia/Chita, Asia/Choibalsan, Asia/Chongqing, Asia/Chungking, Asia/Colombo, Asia/Dacca, Asia/Damascus, Asia/Dhaka, Asia/Dili, Asia/Dubai, Asia/Dushanbe, Asia/Gaza, Asia/Harbin, Asia/Hebron, Asia/Ho_Chi_Minh, Asia/Hong_Kong, Asia/Hovd, Asia/Irkutsk, Asia/Istanbul, Asia/Jakarta, Asia/Jayapura, Asia/Jerusalem, Asia/Kabul, Asia/Kamchatka, Asia/Karachi, Asia/Kashgar, Asia/Kathmandu, Asia/Katmandu, Asia/Khandyga, Asia/Kolkata, Asia/ Krasnoyarsk, Asia/Kuala_Lumpur, Asia/Kuching, Asia/Kuwait, Asia/Macao, Asia/Macau, Asia/ Magadan, Asia/Makassar, Asia/Manila, Asia/Muscat, Asia/Nicosia, Asia/Novokuznetsk, Asia/ Novosibirsk, Asia/Omsk, Asia/Oral, Asia/Phnom_Penh, Asia/Pontianak, Asia/Pyongyang, Asia/Qatar, Asia/Qyzylorda, Asia/Rangoon, Asia/Riyadh, Asia/Saigon, Asia/Sakhalin, Asia/ Samarkand, Asia/Seoul, Asia/Shanghai, Asia/Singapore, Asia/Srednekolymsk, Asia/Taipei, Asia/Tashkent, Asia/Tbilisi, Asia/Tehran, Asia/Tel_Aviv, Asia/Thimbu, Asia/Thimphu, Asia/ Tokyo, Asia/Tomsk, Asia/Ujung_Pandang, Asia/Ulaanbaatar, Asia/Ulan_Bator, Asia/Urumqi, Asia/Ust-Nera, Asia/Vientiane, Asia/Vladivostok, Asia/Yakutsk, Asia/Yekaterinburg, Asia/ Yerevan, Atlantic/Azores, Atlantic/Bermuda, Atlantic/Canary, Atlantic/Cape_Verde, Atlantic/ Faeroe, Atlantic/Faroe, Atlantic/Jan_Mayen, Atlantic/Madeira, Atlantic/Reykjavik, Atlantic/ South_Georgia, Atlantic/St_Helena, Atlantic/Stanley, Australia/ACT, Australia/Adelaide, Australia/Brisbane, Australia/Broken_Hill, Australia/Canberra, Australia/Currie, Australia/ Darwin, Australia/Eucla, Australia/Hobart, Australia/LHI, Australia/Lindeman, Australia/ Lord_Howe, Australia/Melbourne, Australia/NSW, Australia/North, Australia/Perth, Australia/ Queensland, Australia/South, Australia/Sydney, Australia/Tasmania, Australia/Victoria, Australia/West, Australia/Yancowinna, Brazil/Acre, Brazil/DeNoronha, Brazil/East, Brazil/West,

xCommand

xStatus

API Reference Guide
Appendices

CET, CST6CDT, Canada/Atlantic, Canada/Central, Canada/East-Saskatchewan, Canada/ Eastern, Canada/Mountain, Canada/Newfoundland, Canada/Pacific, Canada/Saskatchewan, Canada/Yukon, Chile/Continental, Chile/EasterIsland, Cuba, EET, EST, EST5EDT, Egypt, Eire, Etc/GMT, Etc/GMT+0, Etc/GMT+1, Etc/GMT+10, Etc/GMT+11, Etc/GMT+12, Etc/GMT+2, Etc/ GMT+3, Etc/GMT+4, Etc/GMT+5, Etc/GMT+6, Etc/GMT+7, Etc/GMT+8, Etc/GMT+9, Etc/GMT-0, Etc/GMT-1, Etc/GMT-10, Etc/GMT-11, Etc/GMT-12, Etc/GMT-13, Etc/GMT-14, Etc/GMT-2, Etc/ GMT-3, Etc/GMT-4, Etc/GMT-5, Etc/GMT-6, Etc/GMT-7, Etc/GMT-8, Etc/GMT-9, Etc/GMT0, Etc/Greenwich, Etc/UCT, Etc/UTC, Etc/Universal, Etc/Zulu, Europe/Amsterdam, Europe/ Andorra, Europe/Astrakhan, Europe/Athens, Europe/Belfast, Europe/Belgrade, Europe/Berlin, Europe/Bratislava, Europe/Brussels, Europe/Bucharest, Europe/Budapest, Europe/Busingen, Europe/Chisinau, Europe/Copenhagen, Europe/Dublin, Europe/Gibraltar, Europe/Guernsey, Europe/Helsinki, Europe/Isle_of_Man, Europe/Istanbul, Europe/Jersey, Europe/Kaliningrad, Europe/Kiev, Europe/Kirov, Europe/Lisbon, Europe/Ljubljana, Europe/London, Europe/ Luxembourg, Europe/Madrid, Europe/Malta, Europe/Mariehamn, Europe/Minsk, Europe/ Monaco, Europe/Moscow, Europe/Nicosia, Europe/Oslo, Europe/Paris, Europe/Podgorica, Europe/Prague, Europe/Riga, Europe/Rome, Europe/Samara, Europe/San_Marino, Europe/ Sarajevo, Europe/Simferopol, Europe/Skopje, Europe/Sofia, Europe/Stockholm, Europe/ Tallinn, Europe/Tirane, Europe/Tiraspol, Europe/Ulyanovsk, Europe/Uzhgorod, Europe/Vaduz, Europe/Vatican, Europe/Vienna, Europe/Vilnius, Europe/Volgograd, Europe/Warsaw, Europe/ Zagreb, Europe/Zaporozhye, Europe/Zurich, GB, GB-Eire, GMT, GMT+0, GMT-0, GMT0, Greenwich, HST, Hongkong, Iceland, Indian/Antananarivo, Indian/Chagos, Indian/Christmas, Indian/Cocos, Indian/Comoro, Indian/Kerguelen, Indian/Mahe, Indian/Maldives, Indian/ Mauritius, Indian/Mayotte, Indian/Reunion, Iran, Israel, Jamaica, Japan, Kwajalein, Libya, MET, MST, MST7MDT, Mexico/BajaNorte, Mexico/BajaSur, Mexico/General, NZ, NZ-CHAT, Navajo, PRC, PST8PDT, Pacific/Apia, Pacific/Auckland, Pacific/Bougainville, Pacific/Chatham, Pacific/ Chuuk, Pacific/Easter, Pacific/Efate, Pacific/Enderbury, Pacific/Fakaofo, Pacific/Fiji, Pacific/ Funafuti, Pacific/Galapagos, Pacific/Gambier, Pacific/Guadalcanal, Pacific/Guam, Pacific/ Honolulu, Pacific/Johnston, Pacific/Kiritimati, Pacific/Kosrae, Pacific/Kwajalein, Pacific/ Majuro, Pacific/Marquesas, Pacific/Midway, Pacific/Nauru, Pacific/Niue, Pacific/Norfolk, Pacific/Noumea, Pacific/Pago_Pago, Pacific/Palau, Pacific/Pitcairn, Pacific/Pohnpei, Pacific/ Ponape, Pacific/Port_Moresby, Pacific/Rarotonga, Pacific/Saipan, Pacific/Samoa, Pacific/ Tahiti, Pacific/Tarawa, Pacific/Tongatapu, Pacific/Truk, Pacific/Wake, Pacific/Wallis, Pacific/ Yap, Poland, Portugal, ROC, ROK, Singapore, Turkey, UCT, US/Alaska, US/Aleutian, US/ Arizona, US/Central, US/East-Indiana, US/Eastern, US/Hawaii, US/Indiana-Starke, US/ Michigan, US/Mountain, US/Pacific, US/Pacific-New, US/Samoa, UTC, Universal, W-SU, WET, Zulu
Select a time zone from the list.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

UserInterface configuration
xConfiguration UserInterface ContactInfo Type
Choose which type of contact information to show in the status field in the upper left corner of the display and Touch controller.
Requires user role: ADMIN Default value: Auto
USAGE: xConfiguration UserInterface ContactInfo Type: Type where Type: Auto/None/IPv4/IPv6/H323Id/H320Number/E164Alias/SipUri/SystemName/ DisplayName Auto: Show the address which another system should dial to reach this video system. The address depends on the default call protocol and system registration. None: Do not show any contact information. IPv4: Show the system's IPv4 address. IPv6: Show the system's IPv6 address. H323Id: Show the system's H.323 ID (refer to the H323 H323Alias ID setting). H320Number: Show the system's H.320 number as contact information (only applicable if connected to Cisco TelePresence ISDN Link). E164Alias: Show the system's H.323 E164 Alias as contact information (refer to the H323 H323Alias E164 setting). SipUri: Show the system's SIP URI (refer to the SIP URI setting). SystemName: Show the system's name (refer to the SystemUnit Name setting). DisplayName: Show the system's display name (refer to the SIP DisplayName setting).

xConfiguration UserInterface KeyTones Mode
You can configure the system to make a keyboard click sound effect (key tone) when pressing a key on the remote control, or when typing text or numbers on the Touch controller.
Requires user role: ADMIN, USER Default value: On
USAGE: xConfiguration UserInterface KeyTones Mode: Mode where Mode: Off/On Off: There is no key tone sound effect. On: The key tone sound effect is turned on.
xConfiguration UserInterface Language
Select the language to be used in menus and messages on the screen and Touch controller.
Requires user role: ADMIN, USER Default value: English
USAGE: xConfiguration UserInterface Language: Language where Language: Arabic/Catalan/ChineseSimplified/ChineseTraditional/Czech/Danish/Dutch/ English/EnglishUK/Finnish/French/FrenchCanadian/German/Hebrew/Hungarian/Italian/ Japanese/Korean/Norwegian/Polish/Portuguese/PortugueseBrazilian/Russian/Spanish/ SpanishLatin/Swedish/Turkish Select a language from the list.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration UserInterface OSD Output
Define on which monitor the on-screen information and indicators (OSD) should be displayed.
Requires user role: ADMIN, INTEGRATOR Default value: Auto
USAGE: xConfiguration UserInterface OSD Output: Output where Output: Auto/1/2 Auto: The system detects when a monitor is connected to a video output, and sends the on-screen information and indicators to the first monitor you connect. If you have a multi-monitor setup, and all monitors are connected before switching on the system, the on-screen information and indicators are sent to the video output with the lowest number, starting with Output Connector 1 (HDMI 1).
Range 1-2: The system sends the on-screen information and indicators to the specified output. Choose n to send the on-screen information and indicators to the system's Output Connector n.

UserManagement configuration
xConfiguration UserManagement LDAP Mode
The video system supports the use of an LDAP (Lightweight Directory Access Protocol) server as a central place to store and validate user names and passwords. Use this setting to configure whether or not to use LDAP authentication. Our implementation is tested for the Microsoft Active Directory (AD) service.
Requires user role: ADMIN Default value: Off
USAGE: xConfiguration UserManagement LDAP Mode: Mode where Mode: Off/On Off: LDAP authentication is not allowed. On: For client certificate verification to work when LDAP authentication is enabled, the codec requires a CA (Certificate Authority) certificate, and the user must have a Client Certificate that matches their user distinguishing name (DN) in the active directory (AD).
xConfiguration UserManagement LDAP Server Address
Set the IP address or hostname of the LDAP server.
Requires user role: ADMIN Default value: ""
USAGE: xConfiguration UserManagement LDAP Server Address: "Address" where Address: String (0, 255) A valid IPv4 address, IPv6 address or hostname.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration UserManagement LDAP Server Port
Set the port to connect to the LDAP server on. If set to 0, use the default for the selected protocol (see the UserManagement LDAP Encryption setting).
Requires user role: ADMIN Default value: 0
USAGE: xConfiguration UserManagement LDAP Server Port: Port where Port: Integer (0..65535) The LDAP server port number.
xConfiguration UserManagement LDAP Encryption
Define how to secure the communication between the video system and the LDAP server. You can override the port number by using the UserManagement LDAP Server Port setting.
Requires user role: ADMIN Default value: LDAPS
USAGE: xConfiguration UserManagement LDAP Encryption: Encryption where Encryption: LDAPS/None/STARTTLS LDAPS: Connect to the LDAP server on port 636 over TLS (Transport Layer Security). None: Connect to LDAP server on port 389 with no encryption. STARTTLS: Connect to LDAP server on port 389, then send STARTTLS to enable TLS encryption.

xConfiguration UserManagement LDAP MinimumTLSVersion
Set the lowest version of the TLS (Transport Layer Security) protocol that is allowed.
Requires user role: ADMIN Default value: TLSv1.2
USAGE: xConfiguration UserManagement LDAP MinimumTLSVersion: MinimumTLSVersion where MinimumTLSVersion: TLSv1.0/TLSv1.1/TLSv1.2 TLSv1.0: Support TLS version 1.0 or higher. TLSv1.1: Support TLS version 1.1 or higher. TLSv1.2: Support TLS version 1.2 or higher.
xConfiguration UserManagement LDAP VerifyServerCertificate
When the video system connects to an LDAP server, the server will identify itself to the video system by presenting its certificate. Use this setting to determine whether or not the video system will verify the server certificate.
Requires user role: ADMIN Default value: On
USAGE: xConfiguration UserManagement LDAP VerifyServerCertificate: VerifyServerCertificate where VerifyServerCertificate: Off/On Off: The video system will not verify the LDAP server's certificate. On: The video system must verify that the LDAP server's certificate is signed by a trusted Certificate Authority (CA). The CA must be on the list of trusted CAs that are uploaded to the system in advance. Use the video system's web interface to manage the list of trusted CAs (see more details in the administrator guide).

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration UserManagement LDAP Admin Filter
The LDAP filter is used to determine which users should be granted administrator privileges. If set, this setting takes precedence over the UserManagement LDAP Admin Group setting.
Requires user role: ADMIN Default value: ""
USAGE: xConfiguration UserManagement LDAP Admin Filter: "Filter" where Filter: String (0, 1024) Refer to the LDAP specification for the syntax of this string. Example: "(CN=adminuser)"
xConfiguration UserManagement LDAP Admin Group
Members of this AD (Active Directory) group will be given administrator access. This setting is a shorthand for saying (memberOf:1.2.840.113556.1.4.1941:=<group name>). If UserManagement LDAP Admin Filter is set, this setting is ignored.
Requires user role: ADMIN Default value: ""
USAGE: xConfiguration UserManagement LDAP Admin Group: "Group" where Group: String (0, 255) The distinguishing name of the AD group. Example: "CN=admin_group, OU=company groups, DC=company, DC=com"

xConfiguration UserManagement LDAP Attribute
The attribute used to map to the provided username. If not set, sAMAccountName is used.
Requires user role: ADMIN Default value: ""
USAGE: xConfiguration UserManagement LDAP Attribute: "Attribute" where Attribute: String (0, 255) The attribute name.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Video configuration
xConfiguration Video DefaultMainSource
Define which video input source shall be used as the main video source.
Requires user role: ADMIN, USER Default value: 1
USAGE: xConfiguration Video DefaultMainSource: DefaultMainSource where DefaultMainSource: 1/2 Set the source to be used as the main video source.
xConfiguration Video Input Connector [1..2] CameraControl Mode
Define whether the camera that is connected to this video input connector can be controlled or not. Note that camera control is not available for Connector 2 (DVI-I)
Requires user role: ADMIN, INTEGRATOR Default value: Connector 1: On Connector 2: Off
USAGE: xConfiguration Video Input Connector n CameraControl Mode: Mode where n: Unique ID that identifies the video input connector. Range: 1..2 Mode: Connector 1: Off/On Connector 2: Off Off: Disable camera control. On: Enable camera control.

xConfiguration Video Input Connector [1..2] CameraControl CameraId
The camera ID is a unique identifier of the cameras that are connected to the video input.
Requires user role: ADMIN, INTEGRATOR Default value: 1
USAGE: xConfiguration Video Input Connector n CameraControl CameraId: CameraId where n: Unique ID that identifies the video input connector. Range: 1..2 CameraId: 1 The camera ID is fixed and cannot be changed.
xConfiguration Video Input Connector [2] DviType
The official DVI standard supports both digital and analog signals. In most cases the default AutoDetect setting can detect whether the signal is analog RGB or digital. However, in some rare cases when DVI-I cables are used (these cables can carry both the analog and digital signals) the auto detection fails. This setting makes it possible to override the AutoDetect and select the correct DVI video input.
Requires user role: ADMIN Default value: AutoDetect
USAGE: xConfiguration Video Input Connector n DviType: DviType where DviType: AutoDetect/Digital/AnalogRGB/AnalogYPbPr AutoDetect: Set to AutoDetect to automatically detect if the signal is analog RGB or digital.
Digital: Set to Digital to force the DVI video input to Digital when using DVI-I cables with both analog and digital pins and AutoDetect fails.
AnalogRGB: Set to AnalogRGB to force the DVI video input to AnalogRGB when using DVI-I cables with both analog and digital pins and AutoDetect fails.
AnalogYPbPr: Set to AnalogYPbPr to force the DVI video input to AnalogYPbPr, as the component (YPbPr) signal cannot be auto detected.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration Video Input Connector [1..2] InputSourceType
Select which type of input source is connected to the video input.
Requires user role: ADMIN, INTEGRATOR Default value: Connector 1: camera Connector 2: PC
USAGE: xConfiguration Video Input Connector n InputSourceType: InputSourceType where n: Unique ID that identifies the video input connector. Range: 1..2 InputSourceType: camera/desktop/document_camera/mediaplayer/PC/whiteboard/other Camera: Use this when a camera is connected to the video input. Desktop: Note: The Desktop option is not supported in software version CE9.0.1. Document_camera: Use this when a document camera is connected to the video input. Mediaplayer: Use this when a media player is connected to the video input. PC: Use this when a computer is connected to the video input. Whiteboard: Use this when a whiteboard camera is connected to the video input. Other: Use this when the other options do not match.
xConfiguration Video Input Connector [1..2] Name
Define a name for the video input connector.
Requires user role: ADMIN, INTEGRATOR Default value: ""
USAGE: xConfiguration Video Input Connector n Name: "Name" where n: Unique ID that identifies the video input connector. Range: 1..2 Name: String (0, 50) Name for the video input connector.

xConfiguration Video Input Connector [1..2] Quality
When encoding and transmitting video there is a trade-off between high resolution and high frame rate. For some video sources it is more important to transmit high frame rate than high resolution and vice versa. This setting specifies whether to give priority to high frame rate or to high resolution.
Requires user role: ADMIN, INTEGRATOR Default value: Connector 1: Motion Connector 2: Sharpness
USAGE: xConfiguration Video Input Connector n Quality: Quality where n: Unique ID that identifies the video input connector. Range: 1..2 Quality: Motion/Sharpness Motion: Gives the highest possible frame rate. Used when there is a need for higher frame rates, typically when a large number of participants are present or when there is a lot of motion in the picture.
Sharpness: Gives the highest possible resolution. Used when you want the highest quality of detailed images and graphics.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration Video Input Connector [1..2] PresentationSelection
Define how the video system will behave when you connect a presentation source to the video input. In general, any input source can be used as a presentation source; normally, the main camera will not be used as a presentation source. If the video system is in standby mode, it will wake up when you connect a presentation source. Sharing the presentation with the far end requires additional action (select Share on the user interface) except when this setting is set to AutoShare.
Requires user role: ADMIN, INTEGRATOR Default value: Connector 1: Manual Connector 2: OnConnect
USAGE:
xConfiguration Video Input Connector n PresentationSelection: PresentationSelection where
n: Unique ID that identifies the video input connector. Range: 1..2 PresentationSelection: Manual/OnConnect
AutoShare: While in a call, the content on the video input will automatically be presented to the far end as well as on the local screen when you connect the cable, or when the source is activated otherwise (for example when a connected computer wakes up from sleep mode). You do not have to select Share on the user interface. If a presentation source is already connected when you make or answer a call, you have to manually select Share on the user interface.
Desktop: Note: The Desktop option is not supported in software version CE9.0.1.
Manual: The content on the video input will not be presented on the screen until you select Share from the user interface.
OnConnect: The content on the video input will be presented on screen when you connect the cable, or when the source is activated otherwise (for example when a connected computer wakes up from sleep mode). Otherwise, the behavior is the same as in manual mode.

xConfiguration Video Input Connector [1..2] Visibility
Define the visibility of the video input connector in the menus on the user interface.
Requires user role: ADMIN, INTEGRATOR Default value: Connector 1: IfSignal Connector 2: Always
USAGE: xConfiguration Video Input Connector n Visibility: Visibility where n: Unique ID that identifies the video input connector. Range: 1..2 Visibility: Always/IfSignal/Never Always: The menu selection for the video input connector will always be visible on the user interface.
IfSignal: Yhe menu selection for the video input connector will only be visible when something is connected to the video input.
Never: The input source is not expected to be used as a presentation source, and will not show up on the user interface.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration Video Monitors
A role is assigned to each monitor using the Video Output Connector [n] MonitorRole setting. The monitor role decides which layout (call participants and presentation) will appear on the monitor that is connected to this output. Monitors with different monitor roles will have different layouts. Both monitors can not have monitor role First. The monitor layout mode that is set in the Video Monitors setting should reflect the number of different layouts you want in your room setup. Note that some monitors can be reserved for presentations.
Requires user role: ADMIN, INTEGRATOR Default value: Auto
USAGE: xConfiguration Video Monitors: Monitors where Monitors: Auto/Single/Dual/DualPresentationOnly Auto: The number of monitors connected to the codec is automatically detected, and the layout is distributed on the monitors according to the MonitorRole settings.
Single: The layout is shown on one monitor. If two monitors are connected to the codec, one of them will be disabled.
Dual: The layout is distributed on monitors with monitor role First and Second. If a presentation is part of the layout, all participants in the call are shown on the monitor with monitor role First, and the presentation is shown on the monitor with monitor role Second.
DualPresentationOnly: All participants in the call are shown on the monitor with monitor role First. If a presentation is part of the layout, the presentation is shown on the monitor with monitor role Second.

xConfiguration Video Output Connector [1..2] CEC Mode
This video output (HDMI) supports Consumer Electronics Control (CEC). When this setting is On, the system will use CEC to set the monitor in standby when the system itself enters standby. Likewise the system will wake up the monitor when the system itself wakes up from standby. For this to happen, the monitor that is connected to the output must be CEC compatible and CEC must be configured on the monitor. Note that the different manufacturers uses different marketing names for CEC, for example Anynet+ (Samsung); Aquos Link (Sharp); BRAVIA Sync (Sony); HDMI-CEC (Hitachi); Kuro Link (Pioneer); CE-Link and Regza Link (Toshiba); RIHD (Onkyo); HDAVI Control, EZ-Sync, VIERA Link (Panasonic); EasyLink (Philips); and NetCommand for HDMI (Mitsubishi).
Requires user role: ADMIN, INTEGRATOR Default value: Off
USAGE: xConfiguration Video Output Connector n CEC Mode: Mode where n: Unique ID that identifies the video output connector. Range: 1..2 Mode: Off/On Off: Disable CEC control
On: Enable CEC control

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration Video Output Connector [1..2] MonitorRole
The monitor role describes which video streams will be shown on the monitor connected to this video output connector. Together the Video Monitors setting and the MonitorRole settings for all outputs define which layout (video streams) will be shown on each monitor.
Requires user role: ADMIN, INTEGRATOR Default value: Connector [1]: First Connector [2]: Second
USAGE: xConfiguration Video Output Connector n MonitorRole: MonitorRole where n: Unique ID that identifies the video output connector. Range: 1..2 MonitorRole: Auto/First/Second/PresentationOnly Auto: The system will detect when a monitor is connected, and a monitor role (First, Second) that corresponds with the Video Monitors setting will be assigned automatically.
First/Second: Define the role of the monitor in a multi-monitor setup. In a single-monitor setup, there is no difference between First and Second.
PresentationOnly: Show presentation video stream if active, and nothing else. Monitors/ outputs with this monitor role are disregarded by the Video Monitors setting.

xConfiguration Video Output Connector [1..2] OverscanLevel
Some monitors may not present the entire image that they receive. This means that the outer parts of the image that is sent from the video system may be cut off when displayed on the monitor. Use this setting to instruct the video system not to use the outer part of the available frame. This part might be cut off by the monitor. Both the video and messages on screen will be scaled in this case.
Requires user role: ADMIN Default value: None
USAGE: xConfiguration Video Output Connector n OverscanLevel: OverscanLevel where n: Unique ID that identifies the video output connector. Range: 1..2 OverscanLevel: None/Medium/High None: The video system will use all of the output resolution.
Medium: The video system will not use the outer 3% of the output resolution.
High: The video system will not use the outer 6% of the output resolution.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration Video Output Connector [1..2] Resolution
Define the resolution and refresh rate for the connected screen.
Requires user role: ADMIN, INTEGRATOR, USER Default value: Auto
USAGE: xConfiguration Video Output Connector n Resolution: Resolution where n: Unique ID that identifies the video output connector. Range: 1..2 Resolution: Auto/1280_720_50/1280_720_60/1920_1080_50/1920_1080_60 Auto: The system will automatically try to set the optimal resolution based on negotiation with the connected monitor. 1280_720_50: The resolution is 1280 x 720, and the refresh rate is 50 Hz. 1280_720_60: The resolution is 1280 x 720, and the refresh rate is 60 Hz. 1920_1080_50: The resolution is 1920 x 1080, and the refresh rate is 50 Hz. 1920_1080_60: The resolution is 1920 x 1080, and the refresh rate is 60 Hz.
xConfiguration Video Presentation DefaultSource
Define which video input source to use as a default presentation source. This setting may be used by the API and 3rd party user interfaces. It is not relevant when using the user interfaces provided by Cisco.
Requires user role: ADMIN, USER Default value: 2
USAGE: xConfiguration Video Presentation DefaultSource: DefaultSource where DefaultSource: 1/2 The video input source to use as default presentation source.

xConfiguration Video Selfview Default Mode
Define if the main video source (self-view) shall be displayed on screen after a call. The position and size of the self-view window is determined by the Video Selfview Default PIPPosition and the Video Selfview Default FullscreenMode settings respectively.
Requires user role: ADMIN, INTEGRATOR Default value: Current
USAGE: xConfiguration Video Selfview Default Mode: Mode where Mode: Off/Current/On Off: self-view is switched off when leaving a call.
Current: self-view is left as is, i.e. if it was on during the call, it remains on after the call; if it was off during the call, it remains off after the call.
On: self-view is switched on when leaving a call.
xConfiguration Video Selfview Default FullscreenMode
Define if the main video source (self-view) shall be shown in full screen or as a small picturein-picture (PiP) after a call. The setting only takes effect when self-view is switched on (see the Video Selfview Default Mode setting).
Requires user role: ADMIN, INTEGRATOR Default value: Current
USAGE: xConfiguration Video Selfview Default FullscreenMode: FullscreenMode where FullscreenMode: Off/Current/On Off: self-view will be shown as a PiP.
Current: The size of the self-view picture will be kept unchanged when leaving a call, i.e. if it was a PiP during the call, it remains a PiP after the call; if it was fullscreen during the call, it remains fullscreen after the call.
On: The self-view picture will be shown in fullscreen.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xConfiguration Video Selfview Default OnMonitorRole
Define which monitor/output to display the main video source (self-view) on after a call. The value reflects the monitor roles set for the different outputs in the Video Output Connector [n] MonitorRole settings. The setting applies both when self-view is displayed in full screen, and when it is displayed as picture-in-picture (PiP), but only if the Video Monitors setting is set to Dual.
Requires user role: ADMIN, INTEGRATOR Default value: Current
USAGE: xConfiguration Video Selfview Default OnMonitorRole: OnMonitorRole where OnMonitorRole: First/Second/Current First: The self-view picture will be shown on outputs with the Video Output HDMI MonitorRole set to First.
Second: The self-view picture will be shown on outputs with the Video Output HDMI MonitorRole set to Second.
Current: When leaving a call, the self-view picture will be kept on the same output as it was during the call.

xConfiguration Video Selfview Default PIPPosition
Define the position on screen of the small self-view picture-in-picture (PiP) after a call. The setting only takes effect when self-view is switched on (see the Video Selfview Default Mode setting) and fullscreen view is switched off (see the Video Selfview Default FullscreenMode setting).
Requires user role: ADMIN, INTEGRATOR Default value: Current
USAGE: xConfiguration Video Selfview Default PIPPosition: PIPPosition where PIPPosition: Current/UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/ LowerLeft/LowerRight Current: The position of the self-view PiP will be kept unchanged when leaving a call.
UpperLeft: The self-view PiP will appear in the upper left corner of the screen.
UpperCenter: The self-view PiP will appear in the upper center position.
UpperRight: The self-view PiP will appear in the upper right corner of the screen.
CenterLeft: The self-view PiP will appear in the center left position.
CentreRight: The self-view PiP will appear in the center right position.
LowerLeft: The self-view PiP will appear in the lower left corner of the screen.
LowerRight: The self-view PiP will appear in the lower right corner of the screen.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xConfiguration Video Selfview OnCall Mode
This setting is used to switch on self-view for a short while when setting up a call. The Video Selfview OnCall Duration setting determines for how long it remains on. This applies when selfview in general is switched off.
Requires user role: ADMIN, INTEGRATOR Default value: On
USAGE: xConfiguration Video Selfview OnCall Mode: Mode where Mode: Off/On Off: Self-view is not shown automatically during call setup. On: Self-view is shown automatically during call setup.
xConfiguration Video Selfview OnCall Duration
This setting only has an effect when the Video Selfview OnCall Mode setting is switched On. In this case, the number of seconds set here determines for how long self-view is shown before it is automatically switched off.
Requires user role: ADMIN, INTEGRATOR Default value: 10
USAGE: xConfiguration Video Selfview OnCall Duration: Duration where Duration: Integer (1..60) Range: Choose for how long self-view remains on. The valid range is between 1 and 60 seconds.

xCommand

xStatus

API Reference Guide
Appendices

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Chapter 4
xCommand commands

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

Description of the xCommand commands
In this chapter, you can find a complete list of all xCommand type commands with parameters.
We recommend you visit our web site regularly for updated versions of the manual. Go to: http://www.cisco.com/go/sx-docs

xCommand

xStatus

API Reference Guide
Appendices

Audio commands................................................................................................................................... 88 xCommand Audio Diagnostics MeasureDelay............................................................................................88 xCommand Audio Microphones Mute.........................................................................................................88 xCommand Audio Microphones ToggleMute..............................................................................................88 xCommand Audio Microphones Unmute....................................................................................................88 xCommand Audio Sound Play.....................................................................................................................88 xCommand Audio Sound Stop....................................................................................................................89 xCommand Audio SoundsAndAlerts Ringtone List.....................................................................................89 xCommand Audio SoundsAndAlerts Ringtone Play....................................................................................89 xCommand Audio Volume Decrease..........................................................................................................89 xCommand Audio Volume Increase............................................................................................................89 xCommand Audio Volume Mute..................................................................................................................89 xCommand Audio Volume Set....................................................................................................................90 xCommand Audio Volume SetToDefault.....................................................................................................90 xCommand Audio Volume ToggleMute.......................................................................................................90 xCommand Audio Volume Unmute.............................................................................................................90 xCommand Audio VuMeter Start................................................................................................................90 xCommand Audio VuMeter Stop.................................................................................................................90 xCommand Audio VuMeter StopAll.............................................................................................................91
Bookings commands............................................................................................................................. 91 xCommand Bookings Clear.........................................................................................................................91 xCommand Bookings Get............................................................................................................................91 xCommand Bookings List............................................................................................................................92
Call commands...................................................................................................................................... 92 xCommand Call Accept...............................................................................................................................92

xCommand Call Disconnect........................................................................................................................92 xCommand Call DTMFSend........................................................................................................................93 xCommand Call FarEndControl Camera Move...........................................................................................93 xCommand Call FarEndControl Camera Stop.............................................................................................93 xCommand Call FarEndControl RoomPreset Activate................................................................................93 xCommand Call FarEndControl Source Select...........................................................................................94 xCommand Call Forward.............................................................................................................................94 xCommand Call Hold...................................................................................................................................94 xCommand Call Ignore................................................................................................................................94 xCommand Call Join...................................................................................................................................94 xCommand Call Reject................................................................................................................................95 xCommand Call Resume.............................................................................................................................95 xCommand Call UnattendedTransfer..........................................................................................................95
CallHistory commands........................................................................................................................... 95 xCommand CallHistory AcknowledgeAllMissedCalls.................................................................................95 xCommand CallHistory AcknowledgeMissedCall.......................................................................................95 xCommand CallHistory DeleteAll................................................................................................................95 xCommand CallHistory DeleteEntry............................................................................................................96 xCommand CallHistory Get.........................................................................................................................96 xCommand CallHistory Recents..................................................................................................................97
Camera commands................................................................................................................................ 97 xCommand Camera PositionReset.............................................................................................................97 xCommand Camera PositionSet.................................................................................................................97 xCommand Camera Preset Activate...........................................................................................................98 xCommand Camera Preset ActivateDefaultPosition...................................................................................98

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xCommand Camera Preset Edit..................................................................................................................98 xCommand Camera Preset List..................................................................................................................99 xCommand Camera Preset Remove...........................................................................................................99 xCommand Camera Preset Show...............................................................................................................99 xCommand Camera Preset Store.............................................................................................................100 xCommand Camera Ramp........................................................................................................................100 xCommand Camera TriggerAutofocus......................................................................................................101
Conference commands........................................................................................................................101 xCommand Conference DoNotDisturb Activate.......................................................................................101 xCommand Conference DoNotDisturb Deactivate...................................................................................101 xCommand Conference SpeakerLock Release........................................................................................101 xCommand Conference SpeakerLock Set................................................................................................102
Diagnostics commands....................................................................................................................... 102 xCommand Diagnostics Run.....................................................................................................................102
Dial commands.................................................................................................................................... 103 xCommand Dial.........................................................................................................................................103
HttpFeedback commands.................................................................................................................... 103 xCommand HttpFeedback Deregister.......................................................................................................103 xCommand HttpFeedback Register..........................................................................................................104
Peripherals commands........................................................................................................................ 104 xCommand Peripherals Connect..............................................................................................................104 xCommand Peripherals HeartBeat............................................................................................................105 xCommand Peripherals List......................................................................................................................105 xCommand Peripherals Pairing DeviceDiscovery Start............................................................................105 xCommand Peripherals Pairing Pair..........................................................................................................105 xCommand Peripherals Pairing Unpair.....................................................................................................106 xCommand Peripherals Purge..................................................................................................................106
Phonebook commands........................................................................................................................ 106 xCommand Phonebook Contact Add........................................................................................................106

xCommand Phonebook Contact Delete....................................................................................................107 xCommand Phonebook Contact Modify...................................................................................................107 xCommand Phonebook ContactMethod Add...........................................................................................108 xCommand Phonebook ContactMethod Delete.......................................................................................108 xCommand Phonebook ContactMethod Modify.......................................................................................109 xCommand Phonebook Folder Add..........................................................................................................109 xCommand Phonebook Folder Delete......................................................................................................109 xCommand Phonebook Folder Modify...................................................................................................... 110 xCommand Phonebook Search................................................................................................................ 110
Presentation commands....................................................................................................................... 111 xCommand Presentation Start.................................................................................................................. 111 xCommand Presentation Stop.................................................................................................................. 111
Provisioning commands........................................................................................................................112 xCommand Provisioning CompleteUpgrade............................................................................................. 112 xCommand Provisioning PostponeUpgrade............................................................................................. 112 xCommand Provisioning StartUpgrade..................................................................................................... 112 xCommand Provisioning ExtensionMobility Login..................................................................................... 112 xCommand Provisioning ExtensionMobility Logout.................................................................................. 112
Proximity commands............................................................................................................................113 xCommand Proximity Services Activate................................................................................................... 113 xCommand Proximity Services Deactivate............................................................................................... 113
RoomPreset commands........................................................................................................................113 xCommand RoomPreset Activate............................................................................................................. 113 xCommand RoomPreset Clear.................................................................................................................. 113 xCommand RoomPreset Store.................................................................................................................. 114
Security commands..............................................................................................................................114 xCommand Security Persistency.............................................................................................................. 114 xCommand Security Session List............................................................................................................. 114 xCommand Security Session Terminate................................................................................................... 115

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Standby commands..............................................................................................................................115 xCommand Standby Activate.................................................................................................................... 115 xCommand Standby Deactivate................................................................................................................ 115 xCommand Standby ResetTimer............................................................................................................... 115
SystemUnit commands.........................................................................................................................116 xCommand SystemUnit Boot.................................................................................................................... 116 xCommand SystemUnit FactoryReset...................................................................................................... 116 xCommand SystemUnit Notifications RemoveAll..................................................................................... 117 xCommand SystemUnit OptionKey Add................................................................................................... 117 xCommand SystemUnit OptionKey List.................................................................................................... 117 xCommand SystemUnit OptionKey Remove............................................................................................. 117 xCommand SystemUnit OptionKey RemoveAll......................................................................................... 117 xCommand SystemUnit SignInBanner Clear............................................................................................. 117 xCommand SystemUnit SignInBanner Get............................................................................................... 117 xCommand SystemUnit SignInBanner Set................................................................................................ 118 xCommand SystemUnit SoftReset............................................................................................................ 118 xCommand SystemUnit SoftwareUpgrade............................................................................................... 118
Time commands...................................................................................................................................119 xCommand Time DateTime Get................................................................................................................ 119 xCommand Time DateTime Set................................................................................................................. 119
UserInterface commands.....................................................................................................................119 xCommand UserInterface Extensions Clear............................................................................................. 119 xCommand UserInterface Extensions List................................................................................................ 119 xCommand UserInterface Extensions Widget SetValue........................................................................... 119 xCommand UserInterface Extensions Widget UnsetValue.......................................................................120 xCommand UserInterface Message Alert Clear.......................................................................................120 xCommand UserInterface Message Alert Display....................................................................................120 xCommand UserInterface Message Prompt Clear...................................................................................120 xCommand UserInterface Message Prompt Display................................................................................ 121

xCommand UserInterface Message Prompt Response............................................................................ 121 xCommand UserInterface Message TextLine Clear................................................................................. 121 xCommand UserInterface Message TextLine Display..............................................................................122 xCommand UserInterface OSD Key Click.................................................................................................122 xCommand UserInterface OSD Key Press................................................................................................122 xCommand UserInterface OSD Key Release............................................................................................122 xCommand UserInterface Presentation ExternalSource Add...................................................................123 xCommand UserInterface Presentation ExternalSource List....................................................................123 xCommand UserInterface Presentation ExternalSource Remove............................................................123 xCommand UserInterface Presentation ExternalSource RemoveAll........................................................123 xCommand UserInterface Presentation ExternalSource Select...............................................................123 xCommand UserInterface Presentation ExternalSource State Set..........................................................124
UserManagement commands...............................................................................................................124 xCommand UserManagement RemoteSupportUser Create....................................................................124 xCommand UserManagement RemoteSupportUser Delete.....................................................................124 xCommand UserManagement RemoteSupportUser DisablePermanently...............................................124 xCommand UserManagement RemoteSupportUser GetState.................................................................125 xCommand UserManagement User Passphrase Change........................................................................125 xCommand UserManagement User Passphrase Set...............................................................................125
Video commands..................................................................................................................................126 xCommand Video ActiveSpeakerPIP Set..................................................................................................126 xCommand Video Input SetMainVideoSource..........................................................................................126 xCommand Video Layout LayoutFamily Set..............................................................................................126 xCommand Video Matrix Assign...............................................................................................................127 xCommand Video Matrix Reset.................................................................................................................127 xCommand Video Matrix Swap.................................................................................................................127 xCommand Video Matrix Unassign...........................................................................................................127 xCommand Video PresentationPIP Set.....................................................................................................128 xCommand Video PresentationView Set..................................................................................................128 xCommand Video Selfview Set.................................................................................................................128

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Audio commands
xCommand Audio Diagnostics MeasureDelay
This command will measure the audio delay/latency in a device connected to the video system. A typical use case it to measure the delay in a TV connected to the video system via the HDMI connector. If the delay in a TV is too high, the real-time experience of a video call will be substantially degraded. If the delay is more than 50 ms we recommend the user to find a TV setting that has shorter delay. Typical TV settings that can reduce the delay are: Gaming Mode and PC Mode. This command will measure the delay between output and input (microphone). This means that if you are using an external acoustic echo canceller or audio mixer, this command will also measure the delay of these devices.
Requires user role: ADMIN, USER
USAGE: xCommand Audio Diagnostics MeasureDelay [MeasurementLength: MeasurementLength] [Output: Output] [Volume: Volume] where MeasurementLength: Integer (1..100) The length of the measurement in number of seconds. In a noisy environment a longer measurement time will give a more reliable and robust result.
Output: HDMI/Line/Internal/All HDMI: Measure the delay of the device connected to the HDMI output.
Line: Measure the delay of the device connected to the Line output (only available on video systems that have a Line output).
Internal: Measure the delay of the internal loudspeaker (only available on video systems that have an internal loudspeaker).
All: Will measure the maximum delay of all outputs.
Volume: Integer (1..50) The volume for the test signal. In a noisy environment a higher volume gives more reliable and robust results.

xCommand Audio Microphones Mute
Mute all microphones. Requires user role: INTEGRATOR, USER USAGE:
xCommand Audio Microphones Mute
xCommand Audio Microphones ToggleMute
Toggle the microphone between muted and unmuted. Requires user role: INTEGRATOR, USER USAGE:
xCommand Audio Microphones ToggleMute
xCommand Audio Microphones Unmute
Unmute all microphones. Requires user role: INTEGRATOR, USER USAGE:
xCommand Audio Microphones Unmute
xCommand Audio Sound Play
Play a specified audio sound. Requires user role: INTEGRATOR, USER USAGE:
xCommand Audio Sound Play Sound: Sound where
Sound: Bump/Busy/CallDisconnect/CallInitiate/CallWaiting/Dial/KeyInput/KeyTone/Nav/ NavBack/Notification/OK/PresentationConnect/Ringing/SpecialInfo/TelephoneCall/VideoCall/ Volume
Choose which ringtone to play.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xCommand Audio Sound Stop
Stop playing audio sound.
Requires user role: INTEGRATOR, USER
USAGE: xCommand Audio Sound Stop
xCommand Audio SoundsAndAlerts Ringtone List
List all available ringtones. Use the xConfiguration Audio SoundsAndAlerts RingTone setting to choose a ringtone.
Requires user role: INTEGRATOR, USER
USAGE: xCommand Audio SoundsAndAlerts Ringtone List
xCommand Audio SoundsAndAlerts Ringtone Play
Play one of the available ringtones. Use the xCommand Audio SoundsAndAlerts Ringtone List command to get a list of the available ringtones.
Requires user role: INTEGRATOR, USER
USAGE: xCommand Audio SoundsAndAlerts Ringtone Play RingTone: "RingTone" where RingTone: String (1, 100) The name of the ringtone.

xCommand Audio Volume Decrease
Decrease the volume on the endpoint. By default, the volume is increased by 5 steps (each step is 0.5 dB). Use the Steps parameter if you want to override the default behavior.
Requires user role: ADMIN, USER
USAGE: xCommand Audio Volume Decrease [Steps: Steps] where Steps: Integer (1..10) Choose the number of steps to decrease the volume with. One step is 0.5 dB.
xCommand Audio Volume Increase
Increase the volume on the endpoint. By default, the volume is increased by 5 steps (each step is 0.5 dB). Use the Steps parameter if you want to override the default behavior.
Requires user role: ADMIN, USER
USAGE: xCommand Audio Volume Increase [Steps: Steps] where Steps: Integer (1..10) Choose the number of steps to increase the volume with. One step is 0.5 dB.
xCommand Audio Volume Mute
Mute the volume on the endpoint.
Requires user role: ADMIN, USER
USAGE: xCommand Audio Volume Mute

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand Audio Volume Set
Set the volume on the endpoint to a specified level. Requires user role: ADMIN, USER USAGE:
xCommand Audio Volume Set Level: Level where
Level: Integer (0..100) Select the gain level. 70 equals 0 dB gain, and 100 equals 15 dB gain.
xCommand Audio Volume SetToDefault
Set the volume to the default level that is defined in the xConfiguration Audio DefaultVolume setting. Requires user role: ADMIN, USER USAGE:
xCommand Audio Volume SetToDefault
xCommand Audio Volume ToggleMute
Toggle the loudspeaker between muted and unmuted. Requires user role: ADMIN, USER USAGE:
xCommand Audio Volume ToggleMute
xCommand Audio Volume Unmute
Set the volume on the endpoint back on after muting. Requires user role: ADMIN, USER USAGE:
xCommand Audio Volume Unmute

xCommand

xStatus

API Reference Guide
Appendices

xCommand Audio VuMeter Start
Start a VU meter to show the audio signal level on the specified connector. You have to specify both the connector's type and number (ConnectorType, ConnectorId) to uniquely identify the connector. The VU meter measures the input level for frequencies below 20 kHz.
Requires user role: ADMIN, USER
USAGE: xCommand Audio VuMeter Start ConnectorID: ConnectorID ConnectorType: ConnectorType where ConnectorID: Integer (1..2) for Microphone; Integer (1..1) for Line Select a connector number. Together with the ConnectorType it uniquely identifies the connector.
ConnectorType: Line/Microphone Select the connector type.
xCommand Audio VuMeter Stop
Stop the VU meter on the specified connector. You have to specify both the connector's type and number (ConnectorType, ConnectorId) to uniquely identify the connector.
Requires user role: ADMIN, USER
USAGE: xCommand Audio VuMeter Stop ConnectorID: ConnectorID ConnectorType: ConnectorType where ConnectorID: Integer (1..2) for Microphone; Integer (1..1) for Line Select a connector number. Together with the ConnectorType it uniquely identifies the connector.
ConnectorType: Line/Microphone Select the connector type.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xCommand Audio VuMeter StopAll
Stop all VU meters.
Requires user role: ADMIN, USER
USAGE: xCommand Audio VuMeter StopAll

xConfiguration

xCommand

xStatus

Bookings commands
xCommand Bookings Clear
Clear the current stored list of bookings. Requires user role: ADMIN, USER USAGE:
xCommand Bookings Clear
xCommand Bookings Get
Get the booking information for a specific ID. Requires user role: ADMIN, USER USAGE:
xCommand Bookings Get Id: "Id" where
Id: String (0, 128) The booking ID of a call or conference.

API Reference Guide
Appendices

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand Bookings List
List the stored bookings for the system. The list of booking details is received from the management system. All parameters are optional, and can be used to limit the search result. If no parameters are set, past, present and future bookings are all listed. To avoid listing bookings from yesterday and before, use DayOffset = 0.
Requires user role: ADMIN, USER
USAGE: xCommand Bookings List [Days: Days] [DayOffset: DayOffset] [Limit: Limit] [Offset: Offset] where Days: Integer (1..365) Number of days to retrieve bookings from.
DayOffset: Integer (0..365) Which day to start the search from (today: 0, tomorrow: 1...).
Limit: Integer (1..65534) Max number of bookings to list.
Offset: Integer (0..65534) Offset number of bookings for this search.

xCommand

xStatus

API Reference Guide
Appendices

Call commands
xCommand Call Accept
Accept an incoming call. If no CallId is specified, all incoming calls are accepted.
Requires user role: ADMIN, USER
USAGE: xCommand Call Accept [CallId: CallId] where CallId: Integer (0..65534) The CallID is returned when the xCommand Dial command is run. During the call you can run the xStatus Call command to see the CallId.
xCommand Call Disconnect
Disconnect a call.
Requires user role: ADMIN, USER
USAGE: xCommand Call Disconnect [CallId: CallId] where CallId: Integer (0..65534) The CallID is returned when the xCommand Dial command is run. During the call you can run the xStatus Call command to see the CallId.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand Call DTMFSend
Send DTMF tones to the far end.
Requires user role: ADMIN, USER
USAGE: xCommand Call DTMFSend [CallId: CallId] DTMFString: "DTMFString" where CallId: Integer (0..65534) The CallID is returned when the xCommand Dial command is run. During the call you can run the xStatus Call command to see the CallId. DTMFString: String (0, 32) Enter the DTMF string.
xCommand Call FarEndControl Camera Move
Move the far end camera (the remote camera). NOTE: The far end camera moves in the specified direction until the stop command (ref: xCommand FarEndControl Camera Stop) is issued.
Requires user role: ADMIN, USER
USAGE: xCommand Call FarEndControl Camera Move [CallId: CallId] Value: Value where CallId: Integer (0..65534) The CallID is returned when the xCommand Dial command is run. During the call you can run the xStatus Call command to see the CallId. Value: Left/Right/Up/Down/ZoomIn/ZoomOut Select the action for how to move the camera.

xCommand

xStatus

API Reference Guide
Appendices

xCommand Call FarEndControl Camera Stop
Stop the far end camera after the xCommand FarEndControl Camera Move has been issued.
Requires user role: ADMIN, USER
USAGE: xCommand Call FarEndControl Camera Stop [CallId: CallId] where CallId: Integer (0..65534) The CallID is returned when the xCommand Dial command is run. During a call you can run the xStatus Call command to see the CallId.
xCommand Call FarEndControl RoomPreset Activate
While in a call, this command is used to activate a preset on the far end codec. The preset covers the far end codec's camera positions and input video switcher settings. The preset must be stored on the far end codec beforehand, either by using the xCommand Preset Store command locally on the far end codec, or by using the xCommand FarEndControl Preset Store command from a remote codec. Note: The far end codec's xConfiguration Conference FarEndControl Mode setting must be switched On for the FarEndControl commands to work.
Requires user role: ADMIN, USER
USAGE: xCommand Call FarEndControl RoomPreset Activate [CallId: CallId] PresetId: PresetId where CallId: Integer (0..65534) The CallId is required to identify the far end codec only when in a Multipoint call. The CallId is returned when issuing the xCommand Dial command. During a call you can run the xStatus Call command to see the CallId.
PresetId: Integer (1..15) The ID of the preset that is stored on the far end codec.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xCommand Call FarEndControl Source Select
Select which video input source to use as the main source on the far end system.
Requires user role: ADMIN, USER
USAGE: xCommand Call FarEndControl Source Select [CallId: CallId] SourceId: SourceId where CallId: Integer (0..65534) The CallID is returned when the xCommand Dial command is run. During a call you can run the xStatus Call command to see the CallId. SourceId: Integer (0..15) Select a video input source on the far end.
xCommand Call Forward
Specifies what number or URI you want to forward your incoming calls to. The display name is a local reference for the forwarded destination. A message, together with the local reference, is shown on screen when you have configured the system to forward all calls.
Requires user role: ADMIN, USER
USAGE: xCommand Call Forward DisplayName: "DisplayName" Number: "Number" where DisplayName: String (0, 255) The local reference for the forwarded destination. Number: String (0, 255) The directory number or URI which you want to forward the incoming calls to.

xCommand Call Hold
Put a call on hold.
Requires user role: ADMIN, USER
USAGE: xCommand Call Hold [CallId: CallId] [Reason: Reason] where CallId: Integer (0..65534) The CallID is returned when the xCommand Dial command is run. During a call you can run the xStatus Call command to see the CallId. Reason: Conference/Transfer/Other Internal usage only.
xCommand Call Ignore
Turns off the ringtone for the incoming call. The call can still be answered.
Requires user role: ADMIN, USER
USAGE: xCommand Call Ignore CallId: CallId where CallId: Integer (0..65534) The CallID is returned when the xCommand Dial command is run. During a call you can run the xStatus Call command to see the CallId.
xCommand Call Join
Internal usage only.
Requires user role: ADMIN, USER
USAGE: xCommand Call Join CallId: CallId where CallId: Integer (0..65534)

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xCommand Call Reject
Reject incoming call. If no call id is specified, all incoming calls are rejected.
Requires user role: ADMIN, USER
USAGE: xCommand Call Reject [CallId: CallId] where CallId: Integer (0..65534) The CallID is returned when the xCommand Dial command is run. During a call you can run the xStatus Call command to see the CallId.
xCommand Call Resume
Resume a call that have been put on hold.
Requires user role: ADMIN, USER
USAGE: xCommand Call Resume [CallId: CallId] where CallId: Integer (0..65534) The CallID is returned when the xCommand Dial command is run. During a call you can run the xStatus Call command to see the CallId.
xCommand Call UnattendedTransfer
Transfers an ongoing call to another participant. Fully supported for SIP calls only.
Requires user role: ADMIN, USER
USAGE: xCommand Call UnattendedTransfer CallId: CallId Number: "Number" where CallId: Integer (0..65534) The CallID is returned when the xCommand Dial command is run. During a call you can run the xStatus Call command to see the CallId. Number: String (0, 255) The number the call is transfered to.

CallHistory commands
xCommand CallHistory AcknowledgeAllMissedCalls
Turns off the missed calls indicator on the touch controller for all missed calls.
Requires user role: ADMIN, USER
USAGE: xCommand CallHistory AcknowledgeAllMissedCalls
xCommand CallHistory AcknowledgeMissedCall
Turns off the missed calls indicator on the touch controller for the specified call.
Requires user role: ADMIN, USER
USAGE: xCommand CallHistory AcknowledgeMissedCall CallHistoryId: CallHistoryId [AcknowledgeConsecutiveDuplicates: AcknowledgeConsecutiveDuplicates] where CallHistoryId: Integer (1..2147483647) CallHistoryId for the call in question. Run xCommand CallHistory Get to get the id number. AcknowledgeConsecutiveDuplicates: False/True You can include or exclude all surrounding calls with duplicate information.
xCommand CallHistory DeleteAll
Deletes all information on previous calls.
Requires user role: ADMIN, USER
USAGE: xCommand CallHistory DeleteAll [Filter: Filter] where Filter: All/Missed/Placed/Received You can filter which calls to delete.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand CallHistory DeleteEntry
Deletes all information on the specified call.
Requires user role: ADMIN, USER
USAGE: xCommand CallHistory DeleteEntry CallHistoryId: CallHistoryId [AcknowledgeConsecutiveDuplicates: AcknowledgeConsecutiveDuplicates] where CallHistoryId: Integer (1..2147483647) CallHistoryId for the call in question. Run xCommand CallHistory Get to get the id number.
AcknowledgeConsecutiveDuplicates: False/True You can include or exclude all surrounding calls with duplicate information.

xCommand

xStatus

API Reference Guide
Appendices

xCommand CallHistory Get
Retrieve all information on previous calls made on the video system.
Requires user role: ADMIN, USER
USAGE: xCommand CallHistory Get [Filter: Filter] [Offset: Offset] [Limit: Limit] [DetailLevel: DetailLevel] [SearchString: "SearchString"] [CallHistoryId: CallHistoryId] where Filter: All/Missed/AnsweredElsewhere/Forwarded/Placed/NoAnswer/Received/Rejected/ UnacknowledgedMissed You can filter which calls to retrieve.
Offset: Integer (0..65534) Sets the call from which to start.
Limit: Integer (0..65534) Defines the amount of calls in the output.
DetailLevel: Basic/Full Sets the level of detail for the information on these calls.
SearchString: String ( 0, 255) Allows you to set the command to apply to a specified display name or call back number.
CallHistoryId: Integer (0..65534) CallHistoryId for the call in question.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand CallHistory Recents
Retrieve aggregated information on previous calls made on the video system.
Requires user role: ADMIN, USER
USAGE: xCommand CallHistory Recents [Filter: Filter] [Offset: Offset] [Limit: Limit] [DetailLevel: DetailLevel] [SearchString: "SearchString"] [CallHistoryId: CallHistoryId] [Order: Order] where Filter: All/Missed/AnsweredElsewhere/Forwarded/Placed/NoAnswer/Received/Rejected/ UnacknowledgedMissed You can filter which calls to retrieve.
Offset: Integer (0..65534) Sets the call from which to start.
Limit: Integer (0..65534) Defines the amount of calls in the output.
DetailLevel: Basic/Full Sets the level of detail for the information on these calls.
SearchString: String (0, 255) Allows you to set the command to apply to a specified display name or call back number.
CallHistoryId: Integer (0..65534) CallHistoryId for the call in question.
Order: OccurrenceTime/OccurrenceFrequency Define the order in which the previous calls are presented.

xCommand

xStatus

API Reference Guide
Appendices

Camera commands
xCommand Camera PositionReset
Reset the camera position to default position.
Requires user role: ADMIN, USER
USAGE: xCommand Camera PositionReset [Axis: Axis] CameraId: CameraId where Axis: All/Focus/PanTilt/Zoom Select which motor to reset. If not specified all are reset. CameraId: Integer (1..1) The ID of the camera preset you want to reset.
xCommand Camera PositionSet
Set the camera position.
Requires user role: ADMIN, USER
USAGE: xCommand Camera PositionSet CameraId: CameraId [Focus: Focus] [Pan: Pan] [Tilt: Tilt] [Zoom: Zoom] where CameraId: Integer (1..1) The ID of the camera preset you want to reset. Focus: Integer (0..65535) Focus the camera near or far. Pan: Integer (-10000..10000) Move the camera to the left or right. Tilt: Integer (-2500..2500) Move the camera up or down. Zoom: Integer (0..8500) Zoom in or out.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand Camera Preset Activate
Activate one of the stored camera presets. Note that the xCommand Camera Preset commands applies to an individual camera. This is in contrast to the xCommand Preset commands where a single preset covers ALL connected cameras plus the Video Input switcher settings.
Requires user role: ADMIN, USER
USAGE: xCommand Camera Preset Activate PresetId: PresetId where PresetId: Integer (1..35) The ID of the camera preset you want to activate.
xCommand Camera Preset ActivateDefaultPosition
Sets the cameras to their default position, if one is defined. The default position is defined by xCommand Camera Preset Store or by xCommand Camera Preset Edit. Only one default position can be defined per camera.
Requires user role: ADMIN, USER
USAGE: xCommand Camera Preset ActivateDefaultPosition [CameraId: CameraId] where CameraId: Integer (1..1) The ID of the camera preset you want to activate. If CameraId is not specified, all cameras will be set in their respective default position, if one is defined.

xCommand

xStatus

API Reference Guide
Appendices

xCommand Camera Preset Edit
Edit a stored camera preset. You can change the name of the camera preset and its position in the list that is returned by the xCommand Camera Preset List command. You can also change whether or not this preset is the default position for the associated camera. Note that the xCommand Camera Preset commands applies to an individual camera. This is in contrast to the xCommand Preset commands where a single preset covers ALL connected cameras and the Video Input switcher settings.
Requires user role: ADMIN, USER
USAGE: xCommand Camera Preset Edit PresetId: PresetId [ListPosition: ListPosition] [Name: "Name"] [DefaultProsition: DefaultProsition] where PresetId: Integer (1..35) The ID of the camera preset you want to edit.
ListPosition: Integer (1..35) The position in the list returned by the xCommand Camera Preset List command.
Name: String (0, 255) The name of the camera preset. It will be used in the list returned by the xCommand Camera Preset List command.
DefaultProsition: False/True Defines whether or not this preset is the default position for the associated camera. Note that each camera can only have one default position, so if set, the old default preset will automatically be marked as not default.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand Camera Preset List
List information about available camera presets. Note that the xCommand Camera Preset commands applies to an individual camera. This is in contrast to the xCommand Preset commands where a single preset covers ALL connected cameras plus the Video Input switcher settings.
Requires user role: ADMIN, USER
USAGE: xCommand Camera Preset List CameraId: CameraId [DefaultPosition: DefaultPosition] where CameraId: Integer (1..1) Only list presets for the specified camera. DefaultPosition: False/True List default positions only, or only those that are not default positions.
xCommand Camera Preset Remove
Remove a camera preset. Note that the xCommand Camera Preset commands applies to an individual camera. This is in contrast to the xCommand Preset commands where a single preset covers ALL connected cameras plus the Video Input switcher settings.
Requires user role: ADMIN, USER
USAGE: xCommand Camera Preset Remove PresetId: PresetId where PresetId: Integer (1..35) The ID of the camera preset you want to remove.

xCommand

xStatus

xCommand Camera Preset Show
Shows the preset details for the requested PresetId.
Requires user role: ADMIN, USER
USAGE: xCommand Camera Preset Show PresetId: PresetId where PresetId: Integer (1..35) The ID of the camera preset you wish to see.

API Reference Guide
Appendices

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xCommand Camera Preset Store
Store the current position (pan and tilt), zoom and focus of the chosen camera. The camera is identified by the CameraId parameter. Note that the xCommand Camera Preset commands applies to an individual camera. This is in contrast to the xCommand Preset commands where a single preset covers ALL connected cameras plus the Video Input switcher settings. The xCommand Camera Preset commands are useful when you want to handle multiple camera positions individually per camera, rather than working with complete sets of camera positions. The individual camera presets are not available for far end control.
Requires user role: ADMIN, USER
USAGE: xCommand Camera Preset Store [PresetId: PresetId] CameraId: CameraId [ListPosition: ListPosition] [Name: "Name"] [TakeSnapshot: TakeSnapshot] [DefaultProsition: DefaultProsition] where PresetId: Integer (1..35) The ID of this camera preset. If not set explicitly, the codec will assign a preset ID automatically.
CameraId: Integer (1..1) Select the camera for which to store the preset position.
ListPosition: Integer (1..35) The new camera preset's position in the list returned by the xCommand Camera Preset List command.
Name: String (0, 255) The name of the new camera preset. It will be used in the list returned by the xCommand Camera Preset List command.
TakeSnapshot: False/True Allow or disallow snapshot of the preview.
DefaultProsition: False/True Defines whether or not this preset shall be the default position of the associated camera. Note that each camera can hold only one default position, so if set, the old default preset will automatically be marked as not default.

xCommand Camera Ramp
Move the camera in a specified direction. The camera moves at specified speed until a stop command is issued. In a daisy chain, you need to know the CameraId for the camera you want to address. Be aware that pan and tilt can be operated simultaneously, but no other combinations. In the latter case only the first operation specified is executed. For example, if you try to run both zoom and pan at the same time, only zoom is executed. NOTE: You must run a stop command to stop the camera, see the example below.
Requires user role: ADMIN, USER
USAGE: xCommand Camera Ramp CameraId: CameraId [Pan: Pan] [PanSpeed: PanSpeed] [Tilt: Tilt] [TiltSpeed: TiltSpeed] [Zoom: Zoom] [ZoomSpeed: ZoomSpeed] [Focus: Focus] where CameraId: Integer (1..1) Select the camera.
Pan: Left/Right/Stop Move the camera to the Left or Right, followed by Stop.
PanSpeed: Integer (1..15) Set the pan speed.
Tilt: Down/Up/Stop Move the camera Up or Down, followed by Stop.
TiltSpeed: Integer (1..15) Set the tilt speed.
Zoom: In/Out/Stop Zoom the camera In or Out, followed by Stop.
ZoomSpeed: Integer (1..15) Set the zoom speed.
Focus: Far/Near/Stop Focus the camera Far or Near, followed by Stop.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

100

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand Camera TriggerAutofocus
Trigger the auto-focus functionality. The camera must support auto-focus functionality. If the camera is daisy chained, the CameraId is given by its place in the chain.
Requires user role: ADMIN, USER
USAGE: xCommand Camera TriggerAutofocus CameraId: CameraId where CameraId: Integer (1..1) Select the camera to auto-focus.

xCommand

xStatus

API Reference Guide
Appendices

Conference commands
xCommand Conference DoNotDisturb Activate
This command switches on the Do Not Disturb mode, and the Timeout parameter allows you to control when it is switched off again. When Do Not Disturb is switched on, all incoming calls are rejected and registered as missed calls. The calling side receives a busy signal.
Requires user role: ADMIN, USER
USAGE: xCommand Conference DoNotDisturb Activate [Timeout: Timeout] where Timeout: Integer (1..1440) Set the number of minutes before Do Not Disturb is switched off. If not set, Do Not Disturb times out after 1440 minutes (24 hours).
xCommand Conference DoNotDisturb Deactivate
Switch off the Do Not Disturb mode. When Do Not Disturb is switched off incoming calls come through as normal.
Requires user role: ADMIN, USER
USAGE: xCommand Conference DoNotDisturb Deactivate
xCommand Conference SpeakerLock Release
Releases locked speaker set by xCommand Conference SpeakerLock Set. Default voice switching is switched back on.
Requires user role: ADMIN, USER
USAGE: xCommand Conference SpeakerLock Release

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

101

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xCommand Conference SpeakerLock Set
For manually locking one of the speakers to the prominent speaker position. This overrides the default voice switching.
Requires user role: ADMIN, USER
USAGE: xCommand Conference SpeakerLock Set Target: Target [CallId: CallId] where Target: local/remote Identifies local or remote participant. CallId: Integer (0..65534) Identify CallID for the remote participant. Only relevant if Target is set to "remote".

Diagnostics commands
xCommand Diagnostics Run
This command runs self-diagnostics commands on the system.
Requires user role: ADMIN
USAGE: xCommand Diagnostics Run [ResultSet: ResultSet] where ResultSet: Alerts/All/None You can filter the diagnostics results to alerts, all or none. If not set, the result will show all results.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

102

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Dial commands
xCommand Dial
Dial out from the system. Returns information about the CallId and ConferenceId, which are required for some of the other commands.
Requires user role: ADMIN, USER
USAGE: xCommand Dial Number: "Number" [Protocol: Protocol] [CallRate: CallRate] [CallType: CallType] [BookingId: "BookingId"] [Appearance: Appearance] [DisplayName: "DisplayName"] where Number: String (0, 255) Enter the number or address.
Protocol: H320/H323/Sip/Spark Select the call protocol.
CallRate: Integer (64..6000) Set the call rate.
CallType: Audio/Video Select the call type.
BookingId: String (0, 255) Any identifier that an external booking system (e.g. TMS, CTS-MAN) can use for its own references to match placed calls with the booking systems internal identifier for a meeting. This can be any string, e.g. a GUID. The booking Id is supplied in call logs, call events etc for the call.
Appearance: Integer (1..999999999) Internal usage only.
DisplayName: String (0, 255) The display name of the remote participant.

HttpFeedback commands
xCommand HttpFeedback Deregister
Deregister the HTTP feedback over HTTP(S).
Requires user role: ADMIN
USAGE: xCommand HttpFeedback Deregister FeedbackSlot: FeedbackSlot where FeedbackSlot: Integer (1..4) Deregister the feedback slot that was registered using the xCommand HttpFeedback Register command.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

103

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xCommand HttpFeedback Register
Register the system to a HTTP(S) server to return XML feedback over HTTP(S) to specific URLs.
Requires user role: ADMIN
USAGE: xCommand HttpFeedback Register FeedbackSlot: FeedbackSlot [Format: Format] ServerUrl: "ServerUrl" [Expression[1..15]: "Expression[1..15]"] where FeedbackSlot: Integer (1..4) The codec can register up to 4 slots of servers requesting HTTP feedback. Set the registering to one of them.
Note: Avoid using FeedbackSlot 3 in an environment where Cisco TelePresence Management Suite (TMS) is used as TMS uses this feedbackslot to register its expressions.
Format: XML/JSON Set the format for the feedback from the HTTP server to XML or JSON.
ServerUrl: String (1, 2048) The URL to the HTTP server where you want the codec to post the HTTP feedback messages to.
Expression[1..15]: String (1, 255) The XPath expression specifies which parts of the Status, Configuration or Event XML documents are monitored. You can have from 1 to 15 XPath expressions.

Peripherals commands
xCommand Peripherals Connect
Register peripherals that are connected to the codec, such as control systems and touch panels. The registered peripherals are displayed on the web interface under Configuration > Peripherals. This command should be used when the peripheral connects to the codec for the first time or when the software version on the peripheral has changed. The list of connected devices is available with the command xStatus Peripherals ConnectedDevice [n] Status.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL, USER
USAGE: xCommand Peripherals Connect [HardwareInfo: "HardwareInfo"] ID: "ID" [Name: "Name"] [NetworkAddress: "NetworkAddress"] [SerialNumber: "SerialNumber"] [SoftwareInfo: "SoftwareInfo"] Type: Type where HardwareInfo: String (0, 100) The device's hardware number.
ID: String (1, 100) A unique ID for the device you are connecting to, typically a MAC address.
Name: String (0, 100) Define a name for the device.
NetworkAddress: String (0, 100) Network address for the device you are connecting to.
SerialNumber: String (0, 100) The device's serial number.
SoftwareInfo: String (0, 100) Software version the device is running.
Type: Byod/ControlSystem/Other/TouchPanel Define the type of device you are connecting to.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

104

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xCommand Peripherals HeartBeat
When a peripheral is registered as a connected device, you can set it to send a heartbeat to the codec to let the codec know that it is still connected. This will keep the device on the xStatus Peripherals ConnectedDevice list. If the peripheral is not set to send a heartbeat, the device will disappear from the list after a while. Note: Does not apply to cameras.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL, USER
USAGE: xCommand Peripherals HeartBeat ID: "ID" [Timeout: Timeout] where ID: String (1, 100) A unique ID for the device you are connecting to, typically a MAC address. Timeout: Integer (1..65535) Set how long the device will send heartbeat.
xCommand Peripherals List
Lists all currently and previously connected peripherals.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL
USAGE: xCommand Peripherals List [Connected: Connected] [Type: Type] where Connected: False/True Limit the search to currently connected devices. Type: All/ControlSystem/ISDNLink/Other/TouchPanel Limit the search by device type.

xCommand Peripherals Pairing DeviceDiscovery Start
Start device discovery to detect ISDN Links in the same network.
Requires user role: ADMIN
USAGE: xCommand Peripherals Pairing DeviceDiscovery Start [AutoPairing: AutoPairing] [DeviceType: DeviceType] [Timeout: Timeout] where AutoPairing: On/Off You can select to automatically pair the detected device to the endpoint. DeviceType: ISDNLink Only look for ISDN Link. Timeout: Integer (3..60) Set a maximum time for the search from 3 to 60 seconds.
xCommand Peripherals Pairing Pair
Pair an ISDN Link to an endpoint.
Requires user role: ADMIN
USAGE: xCommand Peripherals Pairing Pair MacAddress: "MacAddress" where MacAddress: String (1, 1450) Enter the MAC address for the ISDN Link you wish to pair to the endpoint.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

105

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xCommand Peripherals Pairing Unpair
Unpair endpoint from an ISDN Link, when the two have contact.
Requires user role: ADMIN
USAGE: xCommand Peripherals Pairing Unpair MacAddress: "MacAddress" where MacAddress: String (1, 100) MacAddress: Enter the MAC address for the ISDN Link you wish to unpair from the endpoint.
xCommand Peripherals Purge
Force unpair an endpoint from an ISDN Link when a connection has been lost. Note: You must also unpair the ISDN Link to be able to pair it to another endpoint.
Requires user role: ADMIN, USER
USAGE: xCommand Peripherals Purge ID: "ID" where ID: String (1, 100) Mac address of the ISDN Link in the format "xx:xx:xx:xx:xx:xx".

Phonebook commands
xCommand Phonebook Contact Add
Add a new contact to the local phonebook. The command returns the ContactId, which is a unique string that identifies the contact; typically the format is "localContactId-n". You can add several contact methods to a contact using the xCommand Phonebook ContactMethod Add command. Note that only the first contact method will appear in the Favorites list on the Cisco TelePresence Touch controller. All contact methods are available in the API, on the web interface and when using the remote control.
Requires user role: ADMIN, USER
USAGE: xCommand Phonebook Contact Add Name: "Name" [FolderId: "FolderId"] [ImageURL: "ImageURL"] [Title: "Title"] [Number: "Number"] [Protocol: Protocol] [CallRate: CallRate] [CallType: CallType] [Device: Device] [Tag: Tag] where Name: String (0, 255) The name of the contact.
FolderId: String (0, 255) The unique identifier for the folder that you want to store the contact in. The identifier will be returned by an xCommand Phonebook Search command. It was also returned when the xCommand Phonebook Folder Add command was issued to make the folder.
ImageURL: String (0, 255) Currently not in use.
Title: String (0, 255) The title of the contact.
Number: String (0, 255) The phone number or address of the contact.
Protocol: Auto/H320/H323/SIP/Spark Select the Auto, Spark, SIP, H323 or H320 protocol.
CallRate: Integer (0..6000) Set a call rate.
CallType: Audio/Video Select a call type (audio or video).

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

106

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

Device: Mobile/Other/Telephone/Video Select the device type.
Tag: Untagged/Favorite Tag the contact as a Favorite, or untag an already tagged contact.
xCommand Phonebook Contact Delete
Delete an existing contact from the local phonebook.
Requires user role: ADMIN, USER
USAGE: xCommand Phonebook Contact Delete ContactId: "ContactId" where ContactId: String (0, 255) The unique identifier for the contact. The identifier will be returned by an xCommand Phonebook Search command. It was also returned when the xCommand Phonebook Contact Add command was issued to make the contact.

xCommand

xStatus

API Reference Guide
Appendices

xCommand Phonebook Contact Modify
Modify contact details of an existing contact in the local phonebook. The following parameters can be changed using this command: Name, FolderId, ImageURL and Title. You must use the xCommand Phonebook ContactMethod Modify command to change the other parameters: Number, Protocol, CallRate, CallType and Device.
Requires user role: ADMIN, USER
USAGE: xCommand Phonebook Contact Modify ContactId: "ContactId" [Name: "Name"] [FolderId: "FolderId"] [ImageURL: "ImageURL"] [Title: "Title"] [Tag: Tag] where ContactId: String (0, 255) The unique identifier for the contact you want to modify. The identifier will be returned by an xCommand Phonebook Search command. It was also returned when the xCommand Phonebook Contact Add command was issued to make the contact.
Name: String (0, 255) The name of the contact.
FolderId: String (0, 255) A unique identifier for the folder. The identifier will be returned by an xCommand Phonebook Search command. It was also returned when the xCommand Phonebook Folder Add command was issued.
ImageURL: String (0, 255) Currently not in use.
Title: String (0, 255) The title of the contact.
Tag: Untagged/Favorite Tag the contact as a Favorite, or untag an already tagged contact.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

107

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xCommand Phonebook ContactMethod Add
Add contact details for an existing contact in the local phonebook. The command returns the ContactMethodId, which is a unique string that identifies the contact method; typically the format is "n". You can add several contact methods to a contact. Note that only the first contact method will appear in the Favorites list on the Cisco TelePresence Touch controller. The first contact method may have been created when issuing the xCommand Phonebook Contact Add command to make the contact. All contact methods are available in the API, on the web interface and when using the remote control.
Requires user role: ADMIN, USER
USAGE: xCommand Phonebook ContactMethod Add ContactId: "ContactId" [Device: Device] Number: "Number" [Protocol: Protocol] [CallRate: CallRate] [CallType: CallType] where ContactId: String (0, 255) The unique identifier for the contact that you want to add a contact method to. The identifier will be returned by an xCommand Phonebook Search command. It was also returned when the xCommand Phonebook Contact Add command was issued to make the contact.
Device: Mobile/Other/Telephone/Video Set which type of device to call to.
Number: String (0, 255) The phone number or address of the contact.
Protocol: Auto/H320/H323/SIP/Spark Select protocol.
CallRate: Integer (0..6000) Set a call rate.
CallType: Audio/Video Select a call type (audio or video).

xCommand Phonebook ContactMethod Delete
Delete a contact method from an existing contact in the local phonebook.
Requires user role: ADMIN, USER
USAGE: xCommand Phonebook ContactMethod Delete ContactId: "ContactId" ContactMethodId: "ContactMethodId" where ContactId: String (0, 255) The unique identifier for the contact you want to change. The identifier will be returned by an xCommand Phonebook Search command. It was also returned when the xCommand Phonebook Contact Add command was issued to make the contact.
ContactMethodId: String (0, 255) The unique identifier for the contact method you want to delete. The identifier will be returned by an xCommand Phonebook Search command. It was also returned when the xCommand Phonebook ContactMethod Add command was issued to make the contact method.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

108

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand Phonebook ContactMethod Modify
Modify details about the contact method for an existing contact in the local phonebook.
Requires user role: ADMIN, USER
USAGE: xCommand Phonebook ContactMethod Modify ContactId: "ContactId" ContactMethodId: "ContactMethodId" [Device: Device] [Number: "Number"] [Protocol: Protocol] [CallRate: CallRate] [CallType: CallType] where ContactId: String (0, 255) The unique identifier for the contact. The identifier will be returned by an xCommand Phonebook Search command. It was also returned when the xCommand Phonebook Contact Add command was issued to make the contact.
ContactMethodId: String (0, 255) The unique identifier for the contact method you want to modify. The identifier will be returned by an xCommand Phonebook Search command. It was also returned when the xCommand Phonebook ContactMethod Add or xCommand Phonebook Contact Add commands were issued to make the contact method.
Device: Mobile/Other/Telephone/Video Set which type of device to call to.
Number: String (0, 255) The phone number or address of the contact.
Protocol: Auto/H320/H323/SIP/Spark Select protocol.
CallRate: Integer (0..6000) Set a call rate.
CallType: Audio/Video Select a call type (audio or video).

API Reference Guide

xCommand

xStatus

Appendices

xCommand Phonebook Folder Add
Phonebook entries can be stored in folders. Use this command to add a folder to the local phonebook. The command returns the FolderId, which is a unique string that identifies the folder; typically the format is "localGroupId-n".
Requires user role: ADMIN, USER
USAGE: xCommand Phonebook Folder Add Name: "Name" [ParentFolderId: "ParentFolderId"] where Name: String (0, 255) The name of the folder.
ParentFolderId: String (0, 255) The unique identifier for the parent folder. The identifier will be returned by an xCommand Phonebook Search command. It was also returned when the xCommand Phonebook Folder Add command was issued to make the parent folder.

xCommand Phonebook Folder Delete
Delete an existing folder from the local phonebook.
Requires user role: ADMIN, USER
USAGE: xCommand Phonebook Folder Delete FolderId: "FolderId" where FolderId: String (0, 255) The unique identifier for the folder. The identifier will be returned by an xCommand Phonebook Search command. It was also returned when the xCommand Phonebook Folder Add command was issued to make the folder.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

109

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand Phonebook Folder Modify
Modify an existing phonebook folder.
Requires user role: ADMIN, USER
USAGE: xCommand Phonebook Folder Modify FolderId: "FolderId" [Name: "Name"] [ParentFolderId: "ParentFolderId"] where FolderId: String (0, 255) The unique identifier for the folder. The identifier will be returned by an xCommand Phonebook Search command. It was also returned when the xCommand Phonebook Folder Add command was issued to make the folder.
Name: String (0, 255) The name of the contact.
ParentFolderId: String (0, 255) The unique identifier for the parent folder. The identifier will be returned by an xCommand Phonebook Search command. It was also returned when the xCommand Phonebook Folder Add command was issued to make the parent folder.

xCommand

xStatus

API Reference Guide
Appendices

xCommand Phonebook Search
The search command lets you search in both the local and corporate phone books. A search gives a ResultSet. The total number of folders and contacts (TotalRows) is always included in the result set when searching the local phone book. When searching a corporate phonebook the total number of folders and contacts may not be included. Whether it is included or not depends on the backend corporate phonebook service (e.g. CUCM, VCS, TMS) and its version.
Requires user role: ADMIN, USER
USAGE: xCommand Phonebook Search [PhonebookId: "PhonebookId"] [PhonebookType: PhonebookType] [SearchString: "SearchString"] [SearchField: SearchField] [Offset: Offset] [FolderId: "FolderId"] [Limit: Limit] [Recursive: Recursive] [ContactType: ContactType] [Tag: Tag] where PhonebookId: String (0, 255) The identifier of the phonebook server that will be searched. See the xConfiguration Phonebook Server ID setting.
PhonebookType: Corporate/Local Define whether to search the local phone book or the corporate phonebook.
SearchString: String (0, 255) Search for entries containing this string (note that the entry does not have to begin with the string). If no FolderId is specified, all folders / phonebook directories will be searched.
SearchField: Name/Number Currently not in use.
Offset: Integer (0..65534) Get records starting with this offset in a search. The default value is 0. Offset is used together with Limit to support paging.
FolderId: String (0, 255) Search only in the specified folder. The FolderId (string) is listed in the ResultSet of a search result containing folders.
Limit: Integer (0..65534) Limit the number of records in the result set to this number. For example, if the limit is set to 10, the ResultSet will contain only 10 entries (Contacts and Folders) even if the total number of hits is larger. The maximum limit is 1000.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

110

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Recursive: False/True This parameter will only have effect when searching the local phone book. The setting determines whether a local phone book search should be limited to the given FolderId, or also recursively search in its subfolders. If not specified, the search will be recursive.
When issuing the command without specifying any parameters, all folders, contacts and contact methods in the local phone book will be returned.
ContactType: Any/Folder/Contact Search all contact types, or limit the search to folders or individual contacts.
Tag: Untagged/Favorite Limits the search to either contacts that have been tagged as favorite or the untagged contacts.

Presentation commands
xCommand Presentation Start
Open a media stream from the selected presentation source.
Requires user role: ADMIN, USER
USAGE: xCommand Presentation Start [PresentationSource: PresentationSource] [SendingMode: SendingMode] [ConnectorId: ConnectorId] [Instance: Instance] where PresentationSource: Integer (1..2) Select the video input source to be used for presentation, identified by source number. SendingMode: LocalRemote/LocalOnly Select whether the presentation is shown locally or locally and remotely. ConnectorId: Integer (1..2) Select the video input source to be used for presentation, identified by connectorId. Instance: New/1/2/3/4/5/6 Select which local presentation instance you wish to start.
xCommand Presentation Stop
Stop the media stream from the presentation source.
Requires user role: ADMIN, USER
USAGE: xCommand Presentation Stop [Instance: Instance] [PresentationSource: PresentationSource] where Instance: 1/2/3/4/5/6 Select which local presentation you wish to stop, identified by presentation instance. PresentationSource: Integer (1..2) Select which local presentation you wish to stop, identified by source number.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

111

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Provisioning commands
xCommand Provisioning CompleteUpgrade
Starts installing the software upgrade if you wish to install it before it is set to do so. Requires user role: ADMIN, USER USAGE:
xCommand Provisioning CompleteUpgrade
xCommand Provisioning PostponeUpgrade
Postpones the installing of the software upgrade. Requires user role: ADMIN, USER USAGE:
xCommand Provisioning PostponeUpgrade SecondsToPostpone: SecondsToPostpone where
SecondsToPostpone: Integer (0..65534) Set how long to postpone the upgrade. The value is in seconds.
xCommand Provisioning StartUpgrade
The codec software can be upgraded from the provisioning server. When starting the upgrade the software is automatically downloaded and installed. The codec reboots to complete the software upgrade. Requires user role: ADMIN, USER USAGE:
xCommand Provisioning StartUpgrade

xCommand Provisioning ExtensionMobility Login
Login command for the Extension Mobility service. You log in to the Extension Mobility service with a user name (UserId) and pin code (Pin). The user name and pin code are set up in CUCM. CUCM also supports multiple profiles for a user. If you, for a user that has multiple profiles, submit a login command with only user name and pin code, CUCM will send a list of available profiles back to the video system. Then the video system will create corresponding ExtensionMobilityProfileSelection Profile events, so that a new login command, which contains the Profile parameter in addition to the user name and pin code, can be submitted.
Requires user role: ADMIN, USER
USAGE: xCommand Provisioning ExtensionMobility Login UserId: "UserId" Pin: "Pin" [Profile: "Profile"] where UserId: String (1, 255) A valid user name, as set up in CUCM.
Pin: String (1, 255) A valid pin code for the user, as set up in CUCM.
Profile: String (1, 255) A valid profile for the user, as set up in CUCM. This parameter applies only if the user has multiple profiles.
xCommand Provisioning ExtensionMobility Logout
This command will log you out of your Extension Mobility profile.
Requires user role: ADMIN, USER
USAGE: xCommand Provisioning ExtensionMobility Logout

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

112

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

Proximity commands
xCommand Proximity Services Activate
Reactivate the Proximity services that were deactivated with xCommand Proximity Services Deactivate. Requires user role: ADMIN, USER USAGE:
xCommand Proximity Services Activate
xCommand Proximity Services Deactivate
This command deactivates all proximity services on the endpoint. To reactivate proximity services use the command xCommand Proximity Services Activate. Requires user role: ADMIN, USER USAGE:
xCommand Proximity Services Deactivate

xCommand

xStatus

API Reference Guide
Appendices

RoomPreset commands
xCommand RoomPreset Activate
Activate one of the locally stored presets. Note that information about all video input sources, and pan, tilt, zoom and focus values for all cameras are included in the same preset. In contrast, the xCommand Camera Preset commands applies to individual cameras only.
Requires user role: ADMIN, USER
USAGE: xCommand RoomPreset Activate PresetId: PresetId where PresetId: Integer (1..15) The ID of the preset you want to activate.
xCommand RoomPreset Clear
Delete a preset. Note that information about all video input sources, and pan, tilt, zoom and focus values for all cameras are included in the same preset. In contrast, the xCommand Camera Preset commands applies to individual cameras only.
Requires user role: ADMIN, USER
USAGE: xCommand RoomPreset Clear PresetId: PresetId where PresetId: Integer (1..15) The ID of the preset you want to delete.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

113

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xCommand RoomPreset Store
Store the connector selections for all video input sources and the current position (pan and tilt), zoom and focus values for all cameras. Note that information about all video input sources, and pan, tilt, zoom and focus values for all cameras are included in the same preset. The system may hold 15 such predefined video input presets. These presets are available for far end control, i.e. they are referred in the PresetId parameter of the xCommand FarEndControl Preset Activate command. In contrast, the xCommand Camera Preset commands applies to individual cameras only. Those presets are not available for far end control.
Requires user role: ADMIN, USER
USAGE: xCommand RoomPreset Store [Description: "Description"] PresetId: PresetId Type: Type where Description: String (0, 255) Enter a description of the camera preset.
PresetId: Integer (1..15) The ID of this preset.
Type: All/Camera Not applicable. If you want to ensure that a preset only affects camera positions we recommend that you select Camera.

Security commands
xCommand Security Persistency
Set the following features to persistent or non-persistent mode. In non-persistent mode the information gathered by the specified feature does not persist a reboot of the system. Persistent mode is the default. This command reboots the system.
Requires user role: ADMIN
USAGE: xCommand Security Persistency Configurations: Configurations CallHistory: CallHistory InternalLogging: InternalLogging LocalPhonebook: LocalPhonebook DHCP: DHCP ConfirmAndReboot: ConfirmAndReboot where Configurations: NonPersistent/Persistent In non-persistent mode, all configurations are set back to default when the system reboots. CallHistory: NonPersistent/Persistent In non-persistent mode call history is deleted when the system reboots. InternalLogging: NonPersistent/Persistent In non-persistent mode eventlog is deleted when the system reboots. LocalPhonebook: NonPersistent/Persistent In non-persistent mode local phone book is deleted when the system reboots. DHCP: NonPersistent/Persistent In non-persistent mode all IP related information is deleted when the system reboots. ConfirmAndReboot: Yes Reboots the system.
xCommand Security Session List
List active sessions.
Requires user role: ADMIN, USER
USAGE: xCommand Security Session List

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

114

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand Security Session Terminate
Terminate a session.
Requires user role: ADMIN, USER
USAGE: xCommand Security Session Terminate SessionId: "SessionId" where SessionId: String (0, 32) The session ID number.

xCommand

xStatus

API Reference Guide
Appendices

Standby commands
xCommand Standby Activate
Set the system in standby mode, which turns off the video outputs and put the camera into sleep mode.
Requires user role: ADMIN, INTEGRATOR, USER
USAGE: xCommand Standby Activate
xCommand Standby Deactivate
Bring the system out of standby mode.
Requires user role: ADMIN, INTEGRATOR, USER
USAGE: xCommand Standby Deactivate
xCommand Standby ResetTimer
Set a temporary standby delay. If the system is in standby mode when the reset timer is set, the system is brought out of standby mode. When left idle for the given delay the system goes into standby mode. Setting the reset timer does not affect the Standby Delay in the Advanced configuration menu (or by xConfiguration Standby Delay). Next time this delay is the valid standby delay.
Requires user role: ADMIN, USER
USAGE: xCommand Standby ResetTimer Delay: Delay where Delay: Integer (1..480) Set the delay in minutes.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

115

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

SystemUnit commands
xCommand SystemUnit Boot
Reboot the system.
Requires user role: INTEGRATOR, USER
USAGE: xCommand SystemUnit Boot [Action: Action] where Action: Restart/Shutdown As a default the system restarts after a reboot. By selecting Shutdown, the system will not restart.

xCommand SystemUnit FactoryReset
Reset the codec to factory default settings. The call logs are deleted and all system parameters are reset to default values. All files that have been uploaded to the codec are deleted. Option key(s) are not affected. As a default the system restarts after the factory reset, but other behaviour can be forced by selecting a different TrailingAction.
Requires user role: ADMIN, USER
USAGE: xCommand SystemUnit FactoryReset Confirm: Confirm [Keep: Keep] [TrailingAction: TrailingAction] where Confirm: Yes Include to confirm your choice. Keep: LocalSetup/Network/Spark/Provisioning Select which configurations to keep when you factory reset the system. LocalSetup: xConfiguration Audio DefaultVolume xConfiguration Audio SoundsAndAlerts RingVolume xConfiguration Time Zone xConfiguration UserInterface Language xConfiguration Video Output Connector OverscanLevel xCommand Camera Preset Store Network: xConfiguration Network 1 xConfiguration NetworkServices Wifi Allowed xConfiguration NetworkServices Wifi Enabled Spark: xConfiguration Spark ServiceOverrides GdsBaseUrl xConfiguration Spark ServiceOverrides U2CBaseUrl xConfiguration Spark ServiceOverrides WdmBaseUrl

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

116

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

Provisioning: xConfiguration Provisioning Mode TrailingAction: NoAction/Restart/Shutdown Select Shutdown or NoAction to override the default behaviour (Restart).
xCommand SystemUnit Notifications RemoveAll
Clears the list of system notifications that are reported by xStatus SystemUnit Notifications Text/Type. Requires user role: ADMIN USAGE:
xCommand SystemUnit Notifications RemoveAll
xCommand SystemUnit OptionKey Add
Add an option key to support additional features. Requires user role: ADMIN USAGE:
xCommand SystemUnit OptionKey Add Key: "Key" where
Key: String (16, 24) The key you have received for the option you wish to switch on.
xCommand SystemUnit OptionKey List
List all option keys. Requires user role: ADMIN USAGE:
xCommand SystemUnit OptionKey List

xCommand

xStatus

xCommand SystemUnit OptionKey Remove
Remove a specified option key.
Requires user role: ADMIN
USAGE: xCommand SystemUnit OptionKey Remove Type: Type where Type: MultiSite/RemoteMonitoring

API Reference Guide
Appendices

xCommand SystemUnit OptionKey RemoveAll
Remove all option keys.
Requires user role: ADMIN
USAGE: xCommand SystemUnit OptionKey RemoveAll Confirm: Confirm where Confirm: Yes

xCommand SystemUnit SignInBanner Clear
Clear the sign in banner set with xCommand SystemUnit SignInBanner Set. Requires user role: ADMIN USAGE:
xCommand SystemUnit SignInBanner Clear
xCommand SystemUnit SignInBanner Get
Get the custom message set with xCommand SystemUnit SignInBanner Set. Requires user role: ADMIN USAGE:
xCommand SystemUnit SignInBanner Get

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

117

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand SystemUnit SignInBanner Set
Set a sign in banner with a custom message on the system's user interface. Use: xCommand SystemUnit SignInBanner Set <enter> Banner text <enter> . <enter>
Requires user role: ADMIN
USAGE: xCommand SystemUnit SignInBanner Set
xCommand SystemUnit SoftReset
Reset most parameters to their default values. This does not include parameters associated with room setup, such as camera position, language, and volume.
Requires user role: ADMIN, USER
USAGE: xCommand SystemUnit SoftReset Confirm: Confirm where Confirm: Yes

xCommand

xStatus

API Reference Guide
Appendices

xCommand SystemUnit SoftwareUpgrade
Initiate a software upgrade by fetching the software from a given URL. If the server requires username and password these parameters must be included.
Requires user role: ADMIN
USAGE: xCommand SystemUnit SoftwareUpgrade URL: "URL" [UserName: "UserName"] [Password: "Password"] [Forced: Forced] where URL: String (0, 255) The software package location
UserName: String (0, 255) User name to access the server location, if needed.
Password: String (0, 255) Password to access the server location, if needed.
Forced: False/True You can force a system to accept a software upgrade immediately, without giving users a chance to acknowledge or postpone the update.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

118

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

Time commands
xCommand Time DateTime Get
Read the time and date from the system. Requires user role: ADMIN, USER USAGE:
xCommand Time DateTime Get
xCommand Time DateTime Set
Set the date and time for the system, if not available from NTP (Network Time Protocol). Requires user role: ADMIN, USER USAGE:
xCommand Time DateTime Set [Year: Year] [Month: Month] [Day: Day] [Hour: Hour] [Minute: Minute] [Second: Second] where
Year: Integer (2015..2037)
Month: Integer (1..12)
Day: Integer (1..31)
Hour: Integer (0..23)
Minute: Integer (0..59)
Second: Integer (0..59)

xCommand

xStatus

API Reference Guide
Appendices

UserInterface commands
xCommand UserInterface Extensions Clear
Delete all user interface extensions (widgets) from the video system.
Requires user role: ADMIN
USAGE: xCommand UserInterface Extensions Clear
xCommand UserInterface Extensions List
List all user interface extensions (widgets) that exist on the video system.
Requires user role: INTEGRATOR, ROOMCONTROL, USER
USAGE: xCommand UserInterface Extensions List
xCommand UserInterface Extensions Widget SetValue
Set the value of the given widget. Updates the UserInterface Extensions status tree. Returns an error if the value is out of range.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL
USAGE: xCommand UserInterface Extensions Widget SetValue Value: "Value" WidgetId: "WidgetId" where Value: String (0, 255) The value of the widget. The range of values depends on the widget type. WidgetId: String (0, 40) The unique identifier for the widget.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

119

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand UserInterface Extensions Widget UnsetValue
Empties the value of the given widget. Updates the UserInterface Extensions status tree and notifies the user interface that this widget is no longer selected.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL
USAGE: xCommand UserInterface Extensions Widget UnsetValue WidgetId: "WidgetId" where WidgetId: String (0, 40) The unique identifier for the widget.
xCommand UserInterface Message Alert Clear
Remove the message which was displayed using the xCommand Message Alert Display command. This is required when the Duration parameter is not set.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL, USER
USAGE: xCommand UserInterface Message Alert Clear

xCommand

xStatus

API Reference Guide
Appendices

xCommand UserInterface Message Alert Display
Display a message on screen, for a specified duration of time (in seconds). NOTE: If Duration is not set, the command must be followed by xCommand Message Alert Clear. Use the xFeedback commands to monitor the feedback from the user. Read more about the xFeedback commands in the API introduction section in this guide.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL
USAGE: xCommand UserInterface Message Alert Display [Title: "Title"] Text: "Text" [Duration: Duration] where Title: String (0, 255) Enter a message title.
Text: String (0, 255) Enter the message to be displayed. The <p> and <br> HTML tags will result in line breaks as normal; any other tags will appear as plain text.
Duration: Integer (0..3600) Set how long (in seconds) the message is to be displayed on the screen. If set to 0 (zero) the message does not disappear until a xCommand Message Alert Clear message has been sent.
xCommand UserInterface Message Prompt Clear
Remove the window displayed using the xCommand Message Alert Display command. Use the xFeedback commands to monitor the feedback from the user. Read more about the xFeedback commands in the API introduction section in this guide.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL, USER
USAGE: xCommand UserInterface Message Prompt Clear [FeedbackId: "FeedbackId"] where FeedbackId: String (0, 255) The FeedbackId corresponds to the FeedbackId given by the xCommand Message Prompt Display command.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

120

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xCommand UserInterface Message Prompt Display
Display a small window on screen with a title, text and up to five options for response from the user. The message is displayed on screen until the user gives a response, or until the system receives the following command xCommand Message Prompt Clear. Use the xFeedback commands to monitor the feedback from the user. Read more about the xFeedback commands in the API introduction section in this guide. Title: Text: FeedbackId: Option.1 to Option.5:
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL
USAGE: xCommand UserInterface Message Prompt Display [Title: "Title"] Text: "Text" [FeedbackId: "FeedbackId"] [Option.1: "Option.1"] [Option.2: "Option.2"] [Option.3: "Option.3"] [Option.4: "Option.4"] [Option.5: "Option.5"] where Title: String (0, 255) Enter the message title.
Text: String (0, 255) Enter the text line to be displayed. The <p> and <br> HTML tags will result in line breaks as normal; any other tags will appear as plain text.
FeedbackId: String (0, 255) To identify the feedback enter a FeedbackId.
Option.1: String (0, 255) Enter the text to appear on the feedback options.
Option.2: String (0, 255) Enter the text to appear on the feedback options.
Option.3: String (0, 255) Enter the text to appear on the feedback options.
Option.4: String (0, 255) Enter the text to appear on the feedback options.
Option.5: String (0, 255) Enter the text to appear on the feedback options.

xCommand UserInterface Message Prompt Response
Give a response to the xCommand Message Prompt Display. Use the xFeedback commands to monitor the feedback from the user. Read more about the xFeedback commands in the API introduction section in this guide.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL, USER
USAGE: xCommand UserInterface Message Prompt Response [FeedbackId: "FeedbackId"] OptionId: OptionId where FeedbackId: String (0, 255) The FeedbackId corresponds to the FeedbackId given by the xCommand Message Prompt Display command. OptionId: Integer (1..5) The OptionId corresponds to the OptionIds given as possible responses in the xCommand Message Prompt Display command.
xCommand UserInterface Message TextLine Clear
Clears the text line which was defined by the xCommand Message TextLine Display command.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL, USER
USAGE: xCommand UserInterface Message TextLine Clear

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

121

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xCommand UserInterface Message TextLine Display
Display a text line on screen. Optionally you can place the text line at a specified location and for a specified duration of time (in seconds). NOTE: If Duration is not set, the command must be followed by xCommand Message TextLine Clear.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL
USAGE: xCommand UserInterface Message TextLine Display Text: "Text" [X: X] [Y: Y] [Duration: Duration] where Text: String (0, 140) Enter the text line to be displayed. The <p> and <br> HTML tags will result in line breaks as normal; any other tags will appear as plain text.
X: Integer (1..10000) Enter the X-coordinate (horizontal) on screen. X=0 is in the upper left corner.
Y: Integer (1..10000) Enter the Y-coordinate (vertical) on screen. Y=0 is in the upper left corner.
Duration: Integer (0..3600) Set how long (in seconds) the text line is to be displayed on the screen. If set to 0 (zero) the text line is displayed until a xCommand Message TextLine Clear command has been sent.
xCommand UserInterface OSD Key Click
Emulates a remote control key press, followed by a key release.
Requires user role: ADMIN
USAGE: xCommand UserInterface OSD Key Click Key: Key where Key: 0/1/2/3/4/5/6/7/8/9/C/Call/Disconnect/Down/F1/F2/F3/F4/F5/Grab/Home/Layout/Left/ Mute/MuteMic/Ok/PhoneBook/Presentation/Right/Selfview/Square/SrcAux/SrcCamera/ SrcDocCam/SrcPc/SrcVcr/Star/Up/VolumeDown/VolumeUp/ZoomIn/ZoomOut/+/Define the remote key to press.

xCommand UserInterface OSD Key Press
Emulates a remote control key press without releasing it. The Key Press command must be followed by a Key Release command to emulate releasing the key.
Requires user role: ADMIN
USAGE: xCommand UserInterface OSD Key Press Key: Key where Key: 0/1/2/3/4/5/6/7/8/9/C/Call/Disconnect/Down/F1/F2/F3/F4/F5/Grab/Home/Layout/Left/ Mute/MuteMic/Ok/PhoneBook/Presentation/Right/Selfview/Square/SrcAux/SrcCamera/ SrcDocCam/SrcPc/SrcVcr/Star/Up/VolumeDown/VolumeUp/ZoomIn/ZoomOut/+/Define the remote key to press.
xCommand UserInterface OSD Key Release
Emulates a remote control key release. The Key Release command is issued after a Key Press command.
Requires user role: ADMIN
USAGE: xCommand UserInterface OSD Key Release Key: Key where Key: 0/1/2/3/4/5/6/7/8/9/C/Call/Disconnect/Down/F1/F2/F3/F4/F5/Grab/Home/Layout/Left/ Mute/MuteMic/Ok/PhoneBook/Presentation/Right/Selfview/Square/SrcAux/SrcCamera/ SrcDocCam/SrcPc/SrcVcr/Star/Up/VolumeDown/VolumeUp/ZoomIn/ZoomOut/+/Define the remote control key to release.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

122

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xCommand UserInterface Presentation ExternalSource Add
Establish and set up an input source that is connected to the video system via an external switch.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL
USAGE: xCommand UserInterface Presentation ExternalSource Add ConnectorId: ConnectorId SourceIdentifier: "SourceIdentifier" Name: "Name" Type: Type where ConnectorId: Integer (1..3) The ID of the video system connector that the external switch is connected to. SourceIdentifier: String (0, 40) A unique string that identifies the input source. The identifier is used by other commands and events when addressing this specific input source. Name: String (0, 40) The name of the input source. This name will be displayed on the user interface. Type: camera/desktop/document_camera/mediaplayer/PC/whiteboard/other The type of input source. The type determines which icon to display on the user interface.
xCommand UserInterface Presentation ExternalSource List
Returns the current list of external input sources.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL
USAGE: xCommand UserInterface Presentation ExternalSource List

xCommand UserInterface Presentation ExternalSource Remove
Remove the input source (specified by the SourceIdentifier) from the list of external input sources.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL
USAGE: xCommand UserInterface Presentation ExternalSource Remove SourceIdentifier: "SourceIdentifier" where SourceIdentifier: String (0, 40) The unique string that identifies this input source. It was defined when the source was created with the UserInterface Presentation ExternalSource Add command.
xCommand UserInterface Presentation ExternalSource RemoveAll
Remove all input sources from the list of external input sources.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL
USAGE: xCommand UserInterface Presentation ExternalSource RemoveAll
xCommand UserInterface Presentation ExternalSource Select
Starts to present the input source (specified by the SourceIdentifier) if it is in Ready state (see the UserInterface Presentation ExternalSource State Set command). The input source will be shown in the user interface sharetray as "Presenting".
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL, USER
USAGE: xCommand UserInterface Presentation ExternalSource Select SourceIdentifier: "SourceIdentifier" where SourceIdentifier: String (0, 40) The unique string that identifies this input source. It was defined when the source was created with the UserInterface Presentation ExternalSource Add command.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

123

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xCommand UserInterface Presentation ExternalSource State Set
Set or change the state of the input source (specified by the SourceIdentifier).
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL
USAGE: xCommand UserInterface Presentation ExternalSource State Set SourceIdentifier: "SourceIdentifier" State: State [ErrorReason: "ErrorReason"] where SourceIdentifier: String (0, 40) The unique string that identifies this input source. It was defined when the source was created with the UserInterface Presentation ExternalSource Add command.
State: Hidden/Ready/NotReady/Error Ready: The input source will be presented when someone selects it (taps it on the user interface, or when the UserInterface Presentation ExternalSource Select command is issued).
NotReady: The input source is not ready, and cannot be selected.
Error: The input source is in an erroneous state. The ErrorReason parameter may be used to inform the user about the reason for failure.
Hidden: The input source will not be displayed in the user interface sharetray.
ErrorReason: String (0, 80) This string is displayed in the user interface sharetray, given that the State parameter is set to Error.

UserManagement commands
xCommand UserManagement RemoteSupportUser Create
Create a remote support user passphrase that Technical Assistance Center (TAC) can use to access the system for troubleshooting.
Requires user role: ADMIN
USAGE: xCommand UserManagement RemoteSupportUser Create [ExpiryDays: ExpiryDays] where ExpiryDays: Integer (1..31) Define the duration for the passphrase validity. Default is 7 days.
xCommand UserManagement RemoteSupportUser Delete
Delete the remote support user created with the command xCommand UserManagement RemoteSupportUser Create.
Requires user role: ADMIN
USAGE: xCommand UserManagement RemoteSupportUser Delete
xCommand UserManagement RemoteSupportUser DisablePermanently
Disable the creation of new remote support users. To enable the remote support user again you must factory reset your system.
Requires user role: ADMIN
USAGE: xCommand UserManagement RemoteSupportUser DisablePermanently Confirm: Confirm where Confirm: Yes

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

124

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xCommand UserManagement RemoteSupportUser GetState
Retrieves the state of the generated remote support user, if one exists. Requires user role: ADMIN USAGE:
xCommand UserManagement RemoteSupportUser GetState
xCommand UserManagement User Passphrase Change
Change the passphrase for the user you logged in as. If you are logged in as the administrator, this will change the administrator passphrase. Requires user role: ADMIN, AUDIT, INTEGRATOR, ROOMCONTROL, USER USAGE:
xCommand UserManagement User Passphrase Change NewPassphrase: "NewPassphrase" OldPassphrase: "OldPassphrase" where
NewPassphrase: String (0, 255)
OldPassphrase: String (0, 255)

xCommand UserManagement User Passphrase Set
Set a user passphrase for the specified user. You must be logged in as an administrator to set a user passphrase. Requires user role: ADMIN USAGE:
xCommand UserManagement User Passphrase Set NewPassphrase: "NewPassphrase" Username: "Username" YourPassphrase: "YourPassphrase" where
NewPassphrase: String (0, 255)
Username: String (0, 127)
YourPassphrase: String (0, 255)

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

125

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Video commands
xCommand Video ActiveSpeakerPIP Set
Sets position for the active speakers PiP (picture in picture).
Requires user role: ADMIN, USER
USAGE: xCommand Video ActiveSpeakerPIP Set Position: Position where Position: CenterLeft/CenterRight/LowerLeft/LowerRight/UpperCenter/UpperLeft/ UpperRight Select one of the predefined positions.
xCommand Video Input SetMainVideoSource
Set which input source is the main video source. You can identify the source either by the identifier of the connector that it is connected to; or by the identifier of the source itself. This command requires the use of one, and only one, of these parameters: ConnectorId or SourceId.
Requires user role: INTEGRATOR, USER
USAGE: xCommand Video Input SetMainVideoSource [ConnectorId: ConnectorId] [SourceId: SourceId] where ConnectorId: Integer (1..3) The identifier (ID) of the connector. Connector [n] has ID n. Run the following API command to find the ID: xStatus Video Input Connector. The connector ID is also printed on the codec connector panel. SourceId: Integer (1..3) The identifier (ID) of the input source. Input Source [n] has ID n. Run the following API command to find the ID: xStatus Video Input Source.

xCommand Video Layout LayoutFamily Set
Select the screen layout mode.
Requires user role: ADMIN, USER
USAGE: xCommand Video Layout LayoutFamily Set [Target: Target] [CallId: CallId] LayoutFamily: LayoutFamily [CustomLayoutName: "CustomLayoutName"] where Target: local/remote Select if the target is the local layout or the remote layout.
CallId: Integer (0..65534) The CallID is returned when the xCommand Dial command is run. During the call you can run the xStatus Call command to see the CallId.
LayoutFamily: auto/custom/equal/overlay/prominent/single Select a layout family.
CustomLayoutName: String (1, 128) Enter a name for the layout.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

126

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xCommand Video Matrix Assign
xCommand Video Matrix commands are a smart overlay to the xCommand Video Layout commands to make it easy to do simple video compositions.
Requires user role: ADMIN, USER
USAGE: xCommand Video Matrix Assign [Mode: Mode] Output: Output SourceId: SourceId where Mode: Add/Replace Choose whether to replace the existing source on that output rendered full screen or to add it. Using Add, the layout engine will recompose the multiple sources automatically. Replace is the default value. Output: Integer (1..2) Choose the output you wish to use for this layout. SourceId: Integer (1..3) The identifier (ID) of the input source. Input Source [n] has ID n. Run the following API command to find the ID: xStatus Video Input Source.
xCommand Video Matrix Reset
Reset the content on the output to the default layout xCommand Video Matrix commands are a smart overlay to the xCommand Video Layout commands to make it easy to do simple video compositions.
Requires user role: ADMIN, USER
USAGE: xCommand Video Matrix Reset [Output: Output] where Output: Integer (1..2) Choose the output you want to reset.

xCommand Video Matrix Swap
Swap the content defined with xCommand Video Matrix Assign between two outputs. xCommand Video Matrix commands are a smart overlay to the xCommand Video Layout commands to make it easy to do simple video compositions.
Requires user role: ADMIN, USER
USAGE: xCommand Video Matrix Swap OutputA: OutputA OutputB: OutputB where OutputA: Integer (1..2) The output you are swapping from. OutputB: Integer (1..2) The output you are swapping to.
xCommand Video Matrix Unassign
Remove a source from an output. Just as with xCommand Video Matrix Assign the layout engine will recompose the remaining sources automatically. xCommand Video Matrix commands are a smart overlay to the xCommand Video Layout commands to make it easy to do simple video compositions.
Requires user role: ADMIN, USER
USAGE: xCommand Video Matrix Unassign Output: Output SourceId: SourceId where Output: Integer (1..2) Choose the output you wish to remove the source from. SourceId: Integer (1..3) The identifier (ID) of the input source. Input Source [n] has ID n. Run the following API command to find the ID: xStatus Video Input Source.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

127

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xCommand Video PresentationPIP Set
Sets position for the presentation PiP (picture in picture).
Requires user role: ADMIN, USER
USAGE: xCommand Video PresentationPIP Set Position: Position where Position: CenterLeft/CenterRight/LowerLeft/LowerRight/UpperCenter/UpperLeft/ UpperRight Select one of the predefined positions.
xCommand Video PresentationView Set
Set the presentation view mode
Requires user role: ADMIN, USER
USAGE: xCommand Video PresentationView Set View: View where View: Default/Maximized/Minimized Select Default when you want the presentation to be viewed with the default settings for the codec. Select Maximized when you want the presentation to be displayed in full screen. Select Minimized when you want the presentation to be displayed in a small picture on screen.

xCommand Video Selfview Set
Sets self-view on/off and specifies its size and position. If the parameter is not specified, current value is used.
Requires user role: ADMIN, USER
USAGE: xCommand Video Selfview Set [Mode: Mode] [FullscreenMode: FullscreenMode] [PIPPosition: PIPPosition] [OnMonitorRole: OnMonitorRole] where Mode: On/Off Selfview is set to on or off.
FullscreenMode: On/Off Choose between displaying the self-view in full screen or as picture-in-picture.
PIPPosition: CenterLeft/CenterRight/LowerLeft/LowerRight/UpperCenter/UpperLeft/ UpperRight
Select the position for the self-view image.
OnMonitorRole: First/Fourth/Second/Third Displays self-view on monitors with this role.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

128

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Chapter 5
xStatus commands

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

129

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

Description of the xStatus commands
In this chapter, you can find all of the xStatus commands and the responses. Status type commands return information about the system and system processes. You can query all information or just some of it.
We recommend you visit our web site regularly for updated versions of the manual. Go to: http://www.cisco.com/go/sx-docs

xCommand

xStatus

API Reference Guide
Appendices

Audio status......................................................................................................................................... 135 xStatus Audio Input Connectors HDMI [n] EcReferenceDelay...................................................................135 xStatus Audio Input Connectors Microphone [n] ConnectionStatus.........................................................135 xStatus Audio Input Connectors Microphone [n] EcReferenceDelay........................................................135 xStatus Audio Input RemoteInput [n] CallId...............................................................................................135 xStatus Audio Microphones Mute.............................................................................................................135 xStatus Audio Output Connectors Line [n] DelayMs.................................................................................136 xStatus Audio Volume...............................................................................................................................136 xStatus Audio VolumeMute.......................................................................................................................136
Bookings status................................................................................................................................... 136 xStatus Bookings Current Id......................................................................................................................136
Call status.............................................................................................................................................137 xStatus Call [n] AnswerState.....................................................................................................................137 xStatus Call [n] AttendedTransferFrom......................................................................................................137 xStatus Call [n] CallbackNumber...............................................................................................................137 xStatus Call [n] CallType............................................................................................................................137 xStatus Call [n] DeviceType.......................................................................................................................137 xStatus Call [n] Direction............................................................................................................................137 xStatus Call [n] DisplayName.....................................................................................................................138 xStatus Call [n] Duration............................................................................................................................138 xStatus Call [n] Encryption Type................................................................................................................138 xStatus Call [n] FacilityServiceId................................................................................................................138 xStatus Call [n] HoldReason.......................................................................................................................138 xStatus Call [n] PlacedOnHold...................................................................................................................139

xStatus Call [n] Protocol.............................................................................................................................139 xStatus Call [n] ReceiveCallRate................................................................................................................139 xStatus Call [n] RemoteNumber.................................................................................................................139 xStatus Call [n] Status................................................................................................................................139 xStatus Call [n] TransmitCallRate...............................................................................................................139
Cameras status.................................................................................................................................... 140 xStatus Cameras Camera [n] Capabilities Options....................................................................................140 xStatus Cameras Camera [n] Connected..................................................................................................140 xStatus Cameras Camera [n] Flip..............................................................................................................140 xStatus Cameras Camera [n] HardwareID.................................................................................................140 xStatus Cameras Camera [n] MacAddress...............................................................................................140 xStatus Cameras Camera [n] Manufacturer..............................................................................................140 xStatus Cameras Camera [n] Model.......................................................................................................... 141 xStatus Cameras Camera [n] Position Focus............................................................................................ 141 xStatus Cameras Camera [n] Position Pan................................................................................................ 141 xStatus Cameras Camera [n] Position Tilt................................................................................................. 141 xStatus Cameras Camera [n] Position Zoom............................................................................................. 141 xStatus Cameras Camera [n] SerialNumber.............................................................................................. 141 xStatus Cameras Camera [n] SoftwareID..................................................................................................142
Capabilities status................................................................................................................................142 xStatus Capabilities Conference MaxActiveCalls.....................................................................................142 xStatus Capabilities Conference MaxAudioCalls......................................................................................142 xStatus Capabilities Conference MaxCalls...............................................................................................142 xStatus Capabilities Conference MaxVideoCalls......................................................................................143

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

130

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Conference status............................................................................................................................... 143 xStatus Conference ActiveSpeaker CallId................................................................................................143 xStatus Conference Call [n] BookingId......................................................................................................143 xStatus Conference Call [n] Capabilities FarendMessage Mode..............................................................143 xStatus Conference Call [n] Capabilities FECC Mode...............................................................................144 xStatus Conference Call [n] Capabilities FECC NumberOfPresets...........................................................144 xStatus Conference Call [n] Capabilities FECC NumberOfSources..........................................................144 xStatus Conference Call [n] Capabilities FECC Source [n] Name.............................................................144 xStatus Conference Call [n] Capabilities FECC Source [n] Options..........................................................144 xStatus Conference Call [n] Capabilities FECC Source [n] SourceId........................................................144 xStatus Conference Call [n] Capabilities Hold...........................................................................................145 xStatus Conference Call [n] Capabilities IxChannel Status.......................................................................145 xStatus Conference Call [n] Capabilities Presentation..............................................................................145 xStatus Conference Call [n] Manufacturer.................................................................................................145 xStatus Conference Call [n] MicrophonesMuted.......................................................................................145 xStatus Conference Call [n] SoftwareID....................................................................................................145 xStatus Conference DoNotDisturb............................................................................................................146 xStatus Conference Line [n] Mode............................................................................................................146 xStatus Conference Multipoint Mode........................................................................................................146 xStatus Conference Presentation CallId...................................................................................................146 xStatus Conference Presentation LocalInstance [n] SendingMode..........................................................147 xStatus Conference Presentation LocalInstance [n] Source.....................................................................147 xStatus Conference Presentation Mode...................................................................................................147 xStatus Conference SpeakerLock CallId...................................................................................................147 xStatus Conference SpeakerLock Mode..................................................................................................147
Diagnostics status............................................................................................................................... 148 xStatus Diagnostics Message [n] Description...........................................................................................148 xStatus Diagnostics Message [n] Level.....................................................................................................148 xStatus Diagnostics Message [n] References...........................................................................................148 xStatus Diagnostics Message [n] Type......................................................................................................149
H323 status.......................................................................................................................................... 149 xStatus H323 Gatekeeper Address...........................................................................................................149 xStatus H323 Gatekeeper Port.................................................................................................................149

xStatus H323 Gatekeeper Reason............................................................................................................149 xStatus H323 Gatekeeper Status..............................................................................................................150 xStatus H323 Mode Reason......................................................................................................................150 xStatus H323 Mode Status.......................................................................................................................150
HttpFeedback status.............................................................................................................................151 xStatus HttpFeedback [1..4] Expression [1..15].......................................................................................... 151 xStatus HttpFeedback [1..4] Format.......................................................................................................... 151 xStatus HttpFeedback [1..4] URL............................................................................................................... 151
MediaChannels status..........................................................................................................................151 xStatus MediaChannels Call [n] Channel [n] Audio Channels.................................................................... 151 xStatus MediaChannels Call [n] Channel [n] Audio Mute........................................................................... 151 xStatus MediaChannels Call [n] Channel [n] Audio Protocol.....................................................................152 xStatus MediaChannels Call [n] Channel [n] Direction...............................................................................152 xStatus MediaChannels Call [n] Channel [n] Encryption............................................................................152 xStatus MediaChannels Call [n] Channel [n] NetStat Bytes.......................................................................152 xStatus MediaChannels Call [n] Channel [n] NetStat ChannelRate...........................................................153 xStatus MediaChannels Call [n] Channel [n] NetStat Jitter........................................................................153 xStatus MediaChannels Call [n] Channel [n] NetStat LastIntervalLost......................................................153 xStatus MediaChannels Call [n] Channel [n] NetStat LastIntervalReceived..............................................153 xStatus MediaChannels Call [n] Channel [n] NetStat Loss........................................................................153 xStatus MediaChannels Call [n] Channel [n] NetStat MaxJitter.................................................................153 xStatus MediaChannels Call [n] Channel [n] NetStat Packets...................................................................154 xStatus MediaChannels Call [n] Channel [n] ParticipantId.........................................................................154 xStatus MediaChannels Call [n] Channel [n] Type.....................................................................................154 xStatus MediaChannels Call [n] Channel [n] Video ChannelRole..............................................................154 xStatus MediaChannels Call [n] Channel [n] Video FrameRate.................................................................155 xStatus MediaChannels Call [n] Channel [n] Video Protocol.....................................................................155 xStatus MediaChannels Call [n] Channel [n] Video ResolutionX................................................................155 xStatus MediaChannels Call [n] Channel [n] Video ResolutionY................................................................155
Network status..................................................................................................................................... 156 xStatus Network 1 CDP Address..............................................................................................................156 xStatus Network 1 CDP Capabilities.........................................................................................................156

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

131

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xStatus Network 1 CDP DeviceId..............................................................................................................156 xStatus Network 1 CDP Duplex................................................................................................................156 xStatus Network 1 CDP Platform..............................................................................................................156 xStatus Network 1 CDP PortID..................................................................................................................156 xStatus Network 1 CDP PrimaryMgmtAddress........................................................................................157 xStatus Network 1 CDP SysName............................................................................................................157 xStatus Network 1 CDP SysObjectID........................................................................................................157 xStatus Network 1 CDP Version................................................................................................................157 xStatus Network 1 CDP VoIPApplianceVlanID..........................................................................................157 xStatus Network 1 CDP VTPMgmtDomain...............................................................................................157 xStatus Network 1 DNS Domain Name.....................................................................................................158 xStatus Network 1 DNS Server [1..5] Address..........................................................................................158 xStatus Network 1 Ethernet MacAddress.................................................................................................158 xStatus Network 1 Ethernet Speed...........................................................................................................158 xStatus Network 1 IPv4 Address..............................................................................................................158 xStatus Network 1 IPv4 Gateway..............................................................................................................158 xStatus Network 1 IPv4 SubnetMask........................................................................................................159 xStatus Network 1 IPv6 Address..............................................................................................................159 xStatus Network 1 IPv6 Gateway..............................................................................................................159 xStatus Network 1 VLAN Voice VlanId......................................................................................................159
NetworkServices status....................................................................................................................... 160 xStatus NetworkServices NTP CurrentAddress ......................................................................................160 xStatus NetworkServices NTP Server [n] Address...................................................................................160 xStatus NetworkServices NTP Status.......................................................................................................160
Peripherals status.................................................................................................................................161 xStatus Peripherals ConnectedDevice [n] HardwareInfo..........................................................................161 xStatus Peripherals ConnectedDevice [n] ID.............................................................................................161 xStatus Peripherals ConnectedDevice [n] Name......................................................................................161 xStatus Peripherals ConnectedDevice [n] SoftwareInfo...........................................................................161 xStatus Peripherals ConnectedDevice [n] Status......................................................................................161 xStatus Peripherals ConnectedDevice [n] Type........................................................................................161 xStatus Peripherals ConnectedDevice [n] UpgradeStatus........................................................................162

Provisioning status............................................................................................................................... 162 xStatus Provisioning CUCM ExtensionMobility Enabled...........................................................................162 xStatus Provisioning CUCM ExtensionMobility LastLoggedInUserId........................................................162 xStatus Provisioning CUCM ExtensionMobility LoggedIn.........................................................................163 xStatus Provisioning Software Current CompletedAt...............................................................................163 xStatus Provisioning Software Current URL.............................................................................................163 xStatus Provisioning Software Current VersionId.....................................................................................163 xStatus Provisioning Software UpgradeStatus LastChange.....................................................................163 xStatus Provisioning Software UpgradeStatus Message.........................................................................163 xStatus Provisioning Software UpgradeStatus Phase..............................................................................164 xStatus Provisioning Software UpgradeStatus SessionId........................................................................164 xStatus Provisioning Software UpgradeStatus Status..............................................................................164 xStatus Provisioning Software UpgradeStatus URL.................................................................................164 xStatus Provisioning Software UpgradeStatus VersionId.........................................................................164 xStatus Provisioning Status.......................................................................................................................165
Proximity status................................................................................................................................... 165 xStatus Proximity Services Availability......................................................................................................165
Security status..................................................................................................................................... 166 xStatus Security FIPS Mode......................................................................................................................166 xStatus Security Persistency CallHistory..................................................................................................166 xStatus Security Persistency Configurations............................................................................................166 xStatus Security Persistency DHCP..........................................................................................................166 xStatus Security Persistency InternalLogging...........................................................................................166 xStatus Security Persistency LocalPhonebook.........................................................................................167
SIP status............................................................................................................................................. 167 xStatus SIP AlternateURI Alias [n] URI.......................................................................................................167 xStatus SIP AlternateURI Primary [n] URI..................................................................................................167 xStatus SIP Authentication........................................................................................................................167 xStatus SIP CallForward DisplayName......................................................................................................168 xStatus SIP CallForward Mode..................................................................................................................168 xStatus SIP CallForward URI.....................................................................................................................168 xStatus SIP Mailbox MessagesWaiting.....................................................................................................168

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

132

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xStatus SIP Mailbox URI............................................................................................................................168 xStatus SIP Proxy [n] Address...................................................................................................................168 xStatus SIP Proxy [n] Status......................................................................................................................169 xStatus SIP Registration [n] Authentication...............................................................................................169 xStatus SIP Registration [n] Reason..........................................................................................................169 xStatus SIP Registration [n] Status............................................................................................................169 xStatus SIP Registration [n] URI.................................................................................................................170 xStatus SIP Secure....................................................................................................................................170 xStatus SIP Verified...................................................................................................................................170
Standby status......................................................................................................................................171 xStatus Standby State............................................................................................................................... 171
SystemUnit status.................................................................................................................................171 xStatus SystemUnit Hardware Module CompatibilityLevel....................................................................... 171 xStatus SystemUnit Hardware Module SerialNumber.............................................................................. 171 xStatus SystemUnit Hardware Monitoring Fan [n] Status..........................................................................172 xStatus SystemUnit Hardware Temperature.............................................................................................172 xStatus SystemUnit Notifications Notification [n] Text..............................................................................172 xStatus SystemUnit Notifications Notification [n] Type.............................................................................172 xStatus SystemUnit ProductId...................................................................................................................172 xStatus SystemUnit ProductPlatform........................................................................................................173 xStatus SystemUnit ProductType..............................................................................................................173 xStatus SystemUnit Software DisplayName.............................................................................................173 xStatus SystemUnit Software Name.........................................................................................................173 xStatus SystemUnit Software OptionKeys MultiSite.................................................................................173 xStatus SystemUnit Software OptionKeys RemoteMonitoring.................................................................173 xStatus SystemUnit Software ReleaseDate.............................................................................................. 174 xStatus SystemUnit Software Version...................................................................................................... 174 xStatus SystemUnit State NumberOfActiveCalls...................................................................................... 174 xStatus SystemUnit State NumberOfInProgressCalls............................................................................... 174 xStatus SystemUnit State NumberOfSuspendedCalls............................................................................. 174 xStatus SystemUnit Uptime....................................................................................................................... 174

Time status...........................................................................................................................................175 xStatus Time SystemTime.........................................................................................................................175
USB status............................................................................................................................................175 xStatus USB Device [n] State....................................................................................................................175 xStatus USB Device [n] Type.....................................................................................................................175
UserInterface status.............................................................................................................................176 xStatus UserInterface ContactInfo ContactMethod [n] Number...............................................................176 xStatus UserInterface ContactInfo Name..................................................................................................176 xStatus UserInterface Extensions Widget [n] Value..................................................................................176 xStatus UserInterface Extensions Widget [n] WidgetId.............................................................................176
Video status..........................................................................................................................................177 xStatus Video ActiveSpeaker PIPPosition.................................................................................................177 xStatus Video Input Connector [n] Connected..........................................................................................177 xStatus Video Input Connector [n] SignalState.........................................................................................177 xStatus Video Input Connector [n] SourceId.............................................................................................177 xStatus Video Input Connector [n] Type....................................................................................................177 xStatus Video Input MainVideoSource......................................................................................................178 xStatus Video Input Source [n] ConnectorId.............................................................................................178 xStatus Video Input Source [n] FormatStatus............................................................................................178 xStatus Video Input Source [n] FormatType..............................................................................................178 xStatus Video Input Source [n] MediaChannelId.......................................................................................178 xStatus Video Input Source [n] Resolution Height.....................................................................................178 xStatus Video Input Source [n] Resolution RefreshRate............................................................................179 xStatus Video Input Source [n] Resolution Width......................................................................................179 xStatus Video Layout LayoutFamily Local.................................................................................................179 xStatus Video Layout LayoutFamily Remote.............................................................................................179 xStatus Video Monitors.............................................................................................................................179 xStatus Video Output Connector [n] Connected.......................................................................................180 xStatus Video Output Connector [n] ConnectedDevice CEC DeviceType................................................180 xStatus Video Output Connector [n] ConnectedDevice CEC Name.........................................................180 xStatus Video Output Connector [n] ConnectedDevice CEC PowerControl............................................180

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

133

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xStatus Video Output Connector [n] ConnectedDevice CEC PowerStatus..............................................181 xStatus Video Output Connector [n] ConnectedDevice CEC VendorId....................................................181 xStatus Video Output Connector [n] ConnectedDevice Name.................................................................181 xStatus Video Output Connector [n] ConnectedDevice PreferredFormat................................................181 xStatus Video Output Connector [n] MonitorRole.....................................................................................181 xStatus Video Output Connector [n] Resolution Height............................................................................182 xStatus Video Output Connector [n] Resolution RefreshRate...................................................................182 xStatus Video Output Connector [n] Resolution Width.............................................................................182 xStatus Video Output Connector [n] Type.................................................................................................182 xStatus Video Presentation PIPPosition....................................................................................................182 xStatus Video Selfview FullscreenMode...................................................................................................182 xStatus Video Selfview Mode...................................................................................................................183 xStatus Video Selfview OnMonitorRole.....................................................................................................183 xStatus Video Selfview PIPPosition...........................................................................................................183

xCommand

xStatus

API Reference Guide
Appendices

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

134

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Audio status
xStatus Audio Input Connectors HDMI [n] EcReferenceDelay
Returns the detected latency for each loudspeaker to microphone path for systems supporting HDMI input used as microphone input. The result is in milliseconds.
Requires user role: ADMIN, USER Value space of the result returned:
Integer Example:
xStatus Audio Input Connectors HDMI 1 EcReferenceDelay *s Audio Connectors HDMI 1 EcReferenceDelay: 0 ** end
xStatus Audio Input Connectors Microphone [n] ConnectionStatus
Indicates whether a microphone is detected on the microphone input connector.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
Connected/NotConnected/Unknown Example:
xStatus Audio Input Connectors Microphone ConnectionStatus *s Audio Input Connectors Microphone 1 ConnectionStatus: NotConnected *s Audio Input Connectors Microphone 2 ConnectionStatus: Connected ** end

xStatus Audio Input Connectors Microphone [n] EcReferenceDelay
Returns the detected latency for each loudspeaker to microphone path. The result is in milliseconds.
Requires user role: ADMIN, USER Value space of the result returned:
Integer Example:
xStatus Audio Input Connectors Microphone 1 EcReferenceDelay *s Audio Connectors Microphone 1 EcReferenceDelay: 120 ** end
xStatus Audio Input RemoteInput [n] CallId
Shows the CallId for the remote audio input. You can run the command xStatus Audio Input RemoteInput to find the identity [n] of the input.
Requires user role: ADMIN, USER Value space of the result returned:
0..65534 Example:
xStatus Audio Input RemoteInput 8 CallId *s Audio Input RemoteInput 8 CallId: 28 ** end
xStatus Audio Microphones Mute
Shows whether the microphones are muted.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
On/Off Example:
xStatus Audio Microphones Mute *s Audio Microphones Mute: Off ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

135

Cisco TelePresence SX20 Codec

Introduction

About the API

xStatus Audio Output Connectors Line [n] DelayMs
Shows the delay in milliseconds.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
Integer (0..290) Example:
xStatus Audio Output Connectors Line 1 *s Audio Output Connectors Line 1 DelayMs: 60 ** end
xStatus Audio Volume
Shows the volume level (dB) of the loudspeaker output.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
0..100 Example:
xStatus Audio Volume *s Audio Volume: 70 ** end
xStatus Audio VolumeMute
Shows whether the endpoint volume is set to mute.
Requires user role: ADMIN, USER Value space of the result returned:
Off/On Example:
xStatus Audio VolumeMute *s Audio VolumeMute: Off ** end

xConfiguration

xCommand

xStatus

Bookings status
xStatus Bookings Current Id
The ID of the on going booking event, if any.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Bookings Current Id *s Bookings Current Id: "123" ** end

API Reference Guide
Appendices

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

136

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

Call status
xStatus Call [n] AnswerState
Indicates if a call is answered, ignored or has been automatically answered by a system.
Requires user role: ADMIN, USER Value space of the result returned:
Unanswered/Ignored/Autoanswered/Answered Example:
xStatus Call AnswerState *s Call 5 AnswerState: Answered ** end
xStatus Call [n] AttendedTransferFrom
Shows the CallId for the call the current call was transferred from.
Requires user role: ADMIN, USER Value space of the result returned:
Integer Example:
xStatus Call 1 AttendedTransferFrom *s Call 1 AttendedTransferFrom: 1234 ** end
xStatus Call [n] CallbackNumber
Shows the remote (far end) number or URI of an incoming or outgoing call, including the call protocol, for call back. You can run the command xStatus Call to find the call identity.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Call 27 CallbackNumber *s Call 27 CallbackNumber: "h323:firstname.lastname@company.com" ** end

xCommand

xStatus

API Reference Guide
Appendices

xStatus Call [n] CallType
Shows the call type of the incoming or outgoing call. You can run the command xStatus Call to find the call identity.
Requires user role: ADMIN, USER Value space of the result returned:
Video/Audio/AudioCanEscalate/ForwardAllCall/Unknown Example:
xStatus Call 27 CallType *s Call 27 CallType: Video ** end
xStatus Call [n] DeviceType
Indicates whether the remote system is a single endpoint or an MCU. Some Cisco endpoints (SX20, SX80, MX200 G2, MX300 G2) have built-in MCU capabilities.
Requires user role: ADMIN, USER Value space of the result returned:
Endpoint/MCU Example:
xStatus Call DeviceType *s Call 4 DeviceType: Endpoint ** end
xStatus Call [n] Direction
States the direction of the call initiation. You can run the command xStatus Call to find the call identity.
Requires user role: ADMIN, USER Value space of the result returned:
Incoming/Outgoing Example:
xStatus Call 27 Direction *s Call 27 Direction: Outgoing ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

137

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xStatus Call [n] DisplayName
Shows the name of the remote (far end) participant in an incoming or outgoing call. You can run the command xStatus Call to find the call identity.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Call 27 DisplayName *s Call 27 DisplayName: "firstname.lastname@company.com" ** end
xStatus Call [n] Duration
Shows the duration of a call (in seconds). You can run the command xStatus Call to find the call identity.
Requires user role: ADMIN, USER Value space of the result returned:
Integer Example:
xStatus Call 27 Duration *s Call 27 Duration: 2354 ** end
xStatus Call [n] Encryption Type
Shows the encryption type of the call. You can run the command xStatus Call to find the call identity.
Requires user role: ADMIN, USER Value space of the result returned:
None/Aes-128 Example:
xStatus Call 27 Encryption Type *s Call 27 Encryption Type: "None" ** end

xStatus Call [n] FacilityServiceId
When calling a facility service, the facility service id is shown. Otherwise the value 0 is returned.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
0..5 Example:
xStatus Call FacilityServiceId *s Call 3 FacilityServiceId: 1 ** end
xStatus Call [n] HoldReason
Shows the reason the current outgoing call was put on hold. Conference: On hold while the call is being merged into a conference. Transfer: On hold while the call is being transferred. None: All other instances.
Requires user role: ADMIN, USER Value space of the result returned:
Conference/Transfer/None Example:
xStatus Call 2 HoldReason *s Call 2 HoldReason: None ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

138

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xStatus Call [n] PlacedOnHold
Shows the placed on hold status of the call. You can run the command xStatus Call to find the call identity.
Requires user role: ADMIN, USER Value space of the result returned:
True/False Example:
xStatus Call 27 PlacedOnHold *s Call 27 PlacedOnHold: False ** end
xStatus Call [n] Protocol
Shows the call protocol of the incoming or outgoing call. You can run the command xStatus Call to find the call identity.
Requires user role: ADMIN, USER Value space of the result returned:
H320/H323/SIP/Spark/Unknown Example:
xStatus Call 27 Protocol *s Call 27 Protocol: "h323" ** end
xStatus Call [n] ReceiveCallRate
Shows the receive bandwidth in the call in kilobits per second (kbps). You can run the command xStatus Call to find the call identity.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
Integer Example:
xStatus Call 27 ReceiveCallRate *s Call 27 ReceiveCallRate: 4000 ** end

xStatus Call [n] RemoteNumber
Shows the remote (far end) number or URI of an incoming or outgoing call. You can run the command xStatus Call to find the call identity.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Call 27 RemoteNumber *s Call 27 RemoteNumber: "5585232" ** end
xStatus Call [n] Status
Shows the status of a call. You can run the command xStatus Call to find the call identity.
Requires user role: ADMIN, USER Value space of the result returned:
Idle/Dialling/Ringing/Connecting/Connected/Disconnecting/OnHold/EarlyMedia/Preserved/ RemotePreserved Example: xStatus Call 27 Status *s Call 27 Status: Connected ** end
xStatus Call [n] TransmitCallRate
Shows the transmit bandwidth in the call in kilobits per second (kbps). You can run the command xStatus Call to find the call identity.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
Integer Example:
xStatus Call 27 TransmitCallRate *s Call 27 TransmitCallRate: 768 ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

139

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

Cameras status
xStatus Cameras Camera [n] Capabilities Options
Shows the camera capabilities (ptzf = pan, tilt, zoom, focus).
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL Value space of the result returned:
String Example:
xStatus Cameras Camera 1 Capabilities Options *s Camera 1 Capabilities Options: "ptzf" ** end
xStatus Cameras Camera [n] Connected
Shows if the camera is connected or not.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL Value space of the result returned:
True/False Example:
xStatus Cameras Camera 1 Connected *s Camera 1 Connected: True ** end
xStatus Cameras Camera [n] Flip
In Flip mode (vertical flip) the image can be flipped upside down.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL Value space of the result returned:
Auto/On/Off Example:
xStatus Cameras Camera 1 Flip *s Camera 1 Flip: "Off" ** end

xCommand

xStatus

API Reference Guide
Appendices

xStatus Cameras Camera [n] HardwareID
Shows the hardware identity of the camera.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL Value space of the result returned:
String Example:
xStatus Cameras Camera 1 HardwareID *s Camera 1 HardwareID: "50000000" ** end
xStatus Cameras Camera [n] MacAddress
Shows the MAC (Media Access Control) address for the camera.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL Value space of the result returned:
String Example:
xStatus Cameras Camera 1 MacAddress *s Camera 1 MacAddress: "" ** end
xStatus Cameras Camera [n] Manufacturer
Shows the manufacturer of the camera.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL Value space of the result returned:
String Example:
xStatus Cameras Camera 1 Manufacturer *s Camera 1 Manufacturer: "Cisco" ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

140

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xStatus Cameras Camera [n] Model
Shows the camera model.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL Value space of the result returned:
String Example:
xStatus Cameras Camera 1 Model *s Camera 1 Model: "Precision 40" ** end
xStatus Cameras Camera [n] Position Focus
Shows the current focus position of the camera. The value range depends on camera type.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL Value space of the result returned:
0..65535 Example:
xStatus Cameras Camera 1 Position Focus *s Camera 1 Position Focus: 4597 ** end
xStatus Cameras Camera [n] Position Pan
Shows the current pan (move left and right) position of the camera. The value range depends on camera type.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL Value space of the result returned:
-65535..65535 Example:
xStatus Cameras Camera 1 Position Pan *s Camera 1 Position Pan: 412 ** end

xCommand

xStatus

API Reference Guide
Appendices

xStatus Cameras Camera [n] Position Tilt
Shows the current tilt (move up and down) position of the camera. The value range depends on camera type.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL Value space of the result returned:
-65535..65535 Example:
xStatus Cameras Camera 1 Position Tilt *s Camera 1 Position Tilt: 106 ** end
xStatus Cameras Camera [n] Position Zoom
Shows the current zoom (zoom in and out) position of the camera. The value range depends on camera type.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
0..65535 Example:
xStatus Cameras Camera 1 Position Zoom *s Camera 1 Position Zoom: 828 ** end
xStatus Cameras Camera [n] SerialNumber
Shows the camera serial number.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL Value space of the result returned:
String Example:
xStatus Cameras Camera 1 SerialNumber *s Camera 1 SerialNumber: "B1AB26B00010" ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

141

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xStatus Cameras Camera [n] SoftwareID
Shows the software identity of the camera.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL
Value space of the result returned: String
Example: xStatus Cameras Camera 1 SoftwareID *s Camera 1 SoftwareID: "S01718-4.0FINAL [ID:40063] 2014-10-20" ** end

xCommand

xStatus

API Reference Guide
Appendices

Capabilities status
xStatus Capabilities Conference MaxActiveCalls
Shows the the maximum number of simultaneous active calls. Calls that are set on hold/transfer are not counted as active.
Requires user role: ADMIN, USER Value space of the result returned:
0..5 Example:
xStatus Capabilities Conference MaxNumberOfActiveCalls *s Capabilities Conference MaxNumberOfActiveCalls: 3 ** end
xStatus Capabilities Conference MaxAudioCalls
Shows the the maximum number of simultaneous audio calls that is supported.
Requires user role: ADMIN, USER Value space of the result returned:
Integer Example:
xStatus Capabilities Conference MaxAudioCalls *s Capabilities Conference MaxAudioCalls: 3 ** end
xStatus Capabilities Conference MaxCalls
Shows the the maximum number of simultaneous calls.
Requires user role: ADMIN, USER Value space of the result returned:
0..5 Example:
xStatus Capabilities Conference MaxCalls *s Capabilities Conference MaxCalls: 3 ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

142

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xStatus Capabilities Conference MaxVideoCalls
Shows the the maximum number of simultaneous video calls that is supported.
Requires user role: ADMIN, USER
Value space of the result returned: Integer
Example: xStatus Capabilities Conference MaxVideoCalls *s Capabilities Conference MaxVideoCalls: 3 ** end

xCommand

xStatus

API Reference Guide
Appendices

Conference status
xStatus Conference ActiveSpeaker CallId
Shows the CallId of the current active speaker.
Requires user role: ADMIN, USER Value space of the result returned:
Integer Example:
xStatus Conference ActiveSpeaker CallId *s Conference ActiveSpeaker CallId: 3 ** end
xStatus Conference Call [n] BookingId
Shows the booking ID of a conference (if assigned). The booking ID can be used for easy identification of a call or conference.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Conference Call 2 BookingId *s Conference Call 2 BookingId: "MyConference" ** end
xStatus Conference Call [n] Capabilities FarendMessage Mode
Not applicable in this release.
Requires user role: ADMIN, USER Value space of the result returned:
On/Off Example:
xStatus Conference Call Capabilities FarendMessage Mode *s Conference Call 4 Capabilities FarendMessage Mode: Off ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

143

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xStatus Conference Call [n] Capabilities FECC Mode
Shows whether or not you have permission to control the input sources at a far end site. On: Far end input source control is permitted. Off: Far end input source control is not permitted.
Requires user role: ADMIN, USER Value space of the result returned:
On/Off Example:
xStatus Conference Call 2 Capabilities FECC Mode *s Conference Call 2 Capabilities FECC Mode: On ** end
xStatus Conference Call [n] Capabilities FECC NumberOfPresets
Shows the number of presets available for the input sources at a far end site.
Requires user role: ADMIN, USER Value space of the result returned:
1..15 Example:
xStatus Conference Call 2 Capabilities FECC NumberOfPresets *s Conference Call 2 Capabilities FECC NumberOfPresets: 15 ** end
xStatus Conference Call [n] Capabilities FECC NumberOfSources
Shows the number of input sources that can be connected at a far end site.
Requires user role: ADMIN, USER Value space of the result returned:
1..5 Example:
xStatus Conference Call 2 Capabilities FECC NumberOfSources *s Conference Call 2 Capabilities FECC NumberOfSources: 5 ** end

xCommand

xStatus

API Reference Guide
Appendices

xStatus Conference Call [n] Capabilities FECC Source [n] Name
Shows the name of an input source that can be connected at a far end site.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Conference Call 2 Capabilities FECC Source 1 Name *s Conference Call 2 Capabilities FECC Source 1 Name: "Main camera" ** end
xStatus Conference Call [n] Capabilities FECC Source [n] Options
Shows available options for an input source that can be connected at a far end site (for a camera: p=pan; t=tilt; z=zoom; f=focus).
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Conference Call 2 Capabilities FECC Source 1 Options *s Conference Call 2 Capabilities FECC Source 1 Options: "ptzf" ** end
xStatus Conference Call [n] Capabilities FECC Source [n] SourceId
Shows the ID of an input source that can be connected at a far end site.
Requires user role: ADMIN, USER Value space of the result returned:
Integer Example:
xStatus Conference Call 2 Capabilities FECC Source 1 SourceId *s Conference Call 2 Capabilities FECC Source 1 SourceId: 6 ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

144

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xStatus Conference Call [n] Capabilities Hold
Indicates whether the far-end site can be placed on hold or not.
Requires user role: ADMIN, USER Value space of the result returned:
True/False Example:
xStatus Conference Call Capabilities Hold *s Conference Call 2 Capabilities Hold: True ** end
xStatus Conference Call [n] Capabilities IxChannel Status
Not applicable in this release.
Requires user role: ADMIN, USER Value space of the result returned:
Active/Failed/Off Example:
xStatus Conference Call 4 Capabilities IxChannel Status *s Conference Call 4 Capabilities IxChannel Status: Active ** end
xStatus Conference Call [n] Capabilities Presentation
Lists the presentation capabilities for other participants in the conference.
Requires user role: ADMIN, USER Value space of the result returned:
True/False Example:
xStatus Conference Call 2 Capabilities Presentation *s Conference Call 2 Capabilities Presentation: True ** end

xCommand

xStatus

API Reference Guide
Appendices

xStatus Conference Call [n] Manufacturer
Shows the manufacturer of the video system at a far end site.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Conference Call 2 Manufacturer *s Conference Call 2 Manufacturer: "Cisco" ** end
xStatus Conference Call [n] MicrophonesMuted
Lists the audio mute status for other participants in the conference.
Requires user role: ADMIN, USER Value space of the result returned:
True/False Example:
xStatus Conference Call 2 MicrophonesMuted *s Conference Call 2 MicrophonesMuted: True ** end
xStatus Conference Call [n] SoftwareID
Shows the ID of the software running of the video system at a far end site.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Conference Call 2 SoftwareID *s Conference Call 2 SoftwareID: "CE8" ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

145

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xStatus Conference DoNotDisturb
Shows whether DoNotDisturb mode is switched on or not.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
Active/Inactive Example:
xStatus Conference DoNotDisturb *s Conference DoNotDisturb: Inactive ** end
xStatus Conference Line [n] Mode
Indicates whether the system is configured as private or shared line on CUCM.
Requires user role: ADMIN, USER Value space of the result returned:
Shared/Private Example:
xStatus Conference Line Mode *s Conference Line 1 Mode: Private ** end

xCommand

xStatus

API Reference Guide
Appendices

xStatus Conference Multipoint Mode
Shows how the Multipoint video conferences are handled. Auto: The multipoint method available will be choosen automatically; if none are available the Multipoint Mode will automatically be set to Off. If both MultiWay and MultiSite are available, the MultiWay service takes priority over the built-in MultiSite. Off: Multiparty conferences are not allowed. MultiSite: Multiparty conferences are set up using the built-in MultiSite feature. If MultiSite is chosen when the MultiSite feature is not available, the Multipoint Mode will automatically be set to Off. CUCMMediaResourceGroupList: Multiparty conferences (ad hoc conferences) are hosted by the CUCM configured conference bridge. This setting is provisioned by CUCM in a CUCM environment and should never be set manually by the user.
Requires user role: ADMIN, USER
Value space of the result returned: Auto/CUCMMediaResourceGroupList/MultiSite/Off
Example: xStatus Conference Multipoint Mode *s Conference Multipoint Mode: "Auto" ** end
xStatus Conference Presentation CallId
Shows the identity of the system that sends the presentation.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL
Value space of the result returned: Integer
Example: xStatus Conference Presentation CallId *s Conference Presentation CallId: 0 ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

146

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xStatus Conference Presentation LocalInstance [n] SendingMode
Shows whether a presentation source is shared locally or with a remote participant. There can be multiple local presentations which all have their own instance.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL Value space of the result returned:
LocalOnly/LocalRemote/Off Example:
xStatus Conference Presentation LocalInstance 1 SendingMode *s Conference Presentation LocalInstance 1 SendingMode: LocalOnly ** end
xStatus Conference Presentation LocalInstance [n] Source
Shows the SourceId for a current presentation. There can be multiple local presentations which all have their own instance.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL Value space of the result returned:
Integer Example:
xStatus Conference Presentation LocalInstance 1 Source *s Conference Presentation LocalInstance 1 Source: 1 ** end
xStatus Conference Presentation Mode
Shows the status of the secondary video stream.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL Value space of the result returned:
On/Off Example:
xStatus Conference Presentation Mode *s Conference Presentation Mode: Off ** end

xStatus Conference SpeakerLock CallId
Shows the CallId for the participant locked as the prominent speaker in the conference.
Requires user role: ADMIN, USER Value space of the result returned:
Integer Example:
xStatus Conference SpeakerLock CallId *s Conference SpeakerLock CallId: 0 ** end
xStatus Conference SpeakerLock Mode
Shows whether a speaker lock is set or not.
Requires user role: ADMIN, USER Value space of the result returned:
On/Off Example:
xStatus Conference SpeakerLock Mode *s Conference SpeakerLock Mode: Off ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

147

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

Diagnostics status
xStatus Diagnostics Message [n] Description
Shows a description of the current diagnostics alerts.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Diagnostics Message Description *s DiagnosticsResult Message 1 Description: "IP configuration incomplete" ** end
xStatus Diagnostics Message [n] Level
Shows the level of importance of the diagnostics message. Error: There is an error in the system. The system can still be used, but there can be some restrictions. Warning: A problem is detected and a more specific report follows indicating the exact problem. Critical: The warning level is critical. The system cannot be used.
Requires user role: ADMIN, USER Value space of the result returned:
Error/Warning/Critical Example:
xStatus Diagnostics Message 4 Level *s Diagnostics Message 4 Level: Warning ** end

xStatus Diagnostics Message [n] References
Additional information on the diagnostics alert, if available.
Requires user role: ADMIN, USER
Value space of the result returned: String
Example: xStatus Diagnostics Message 10 References *s Diagnostics Message 10 References: "delay=190" ** end

API Reference Guide
Appendices

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

148

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xStatus Diagnostics Message [n] Type
Shows information on the results of the latest diagnostics on the system.
Requires user role: ADMIN, USER
Value space of the result returned: CAPFOperationState/CTLinstallation/CUCMVendorConfigurationFile/ CallProtocolDualStackConfig/CallProtocolIPStackPlatformCompatibility/ CallProtocolVcsProvisioningCompatibility/CameraId/CameraPairing/CameraSerial/ CameraSoftwareVersion/CameraStatus/CamerasDetected/ConfigurationFile/ DefaultCallProtocolRegistered/EthernetDuplexMatches/FanStatus/PresenterTrack/ H320GatewayStatus/H323GatekeeperStatus/HasValidReleaseKey/ IpCameraStatus/IPv4Assignment/IPv6Assignment/IPv6Mtu/ISDNLinkCompatibility/ ISDNLinkIpStack/ITLinstallation/InvalidSIPTransportConfig/LockDown/RoomControl/ MediaBlockingDetected/NetLinkStatus/NetSpeedAutoNegotiated/NetworkQuality/ NTPStatus/OSDVideoOutput/OutputConnectorLocations/ProvisioningStatus/ SIPEncryption/SIPListenPortAndOutboundMode/SIPProfileRegistration/ SIPProfileType/SelectedVideoInputSourceConnected/SipIceAndAnatConflict/ TCPMediaFallback/TemperatureCheck/TLSVerifyRequiredCerts/TouchPanelConnection/ ControlSystemConnection/TurnBandwidth/UdpPortRangeViolation/ UltrasoundSpeakerAvailability/ValidPasswords/VideoFromInternalCamera/VideoInputStability/ VideoInputSignalQuality/SparkConnectivity/SpeakerTrackFrontPanelMountedCorrectly/ SpeakerTrackMicrophoneConnection/SpeakerTrackVideoInputs/ SpeakerTrackEthernetConnection/ANATOnVCS/ECReferenceDelay/AudioECRefDelay/ AudioPairingNoise/AudioPairingRate/AudioPairingSNR/AudioPairingInterference/ AudioPairingTokenDecode/AudioInternalSpeakerDisabled/AbnormalCallTermination/ HasActiveCallProtocol/SipOrH323ButNotBothEnabled/PresentationSourceSelection/ SoftwareUpgrade/PlatformSanity/ContactInfoMismatch/MicrophoneReinforcement/ FirstTimeWizardNotCompleted/CaptivePortalDetected/MonitorDelay
Example:
xStatus Diagnostics Message Type
*s Diagnostics Message 1 Type: CamerasDetected
** end

H323 status
xStatus H323 Gatekeeper Address
Displays the IP address of the gatekeeper where the system is registered.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus H323 Gatekeeper Address *s H323 Gatekeeper Address: "192.0.1.20" ** end
xStatus H323 Gatekeeper Port
Shows the port which is used when connecting to on the gatekeeper.
Requires user role: ADMIN, USER Value space of the result returned:
Integer Example:
xStatus H323 Gatekeeper Port *s H323 Gatekeeper Port: 1719 ** end
xStatus H323 Gatekeeper Reason
Shows the reason for rejected registration.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus H323 Gatekeeper Reason *s H323 Gatekeeper Reason: "" ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

149

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

xStatus H323 Gatekeeper Status
Shows the gatekeeper registration status.
Requires user role: ADMIN, USER
Value space of the result returned: Required/Discovering/Discovered/Authenticating/Authenticated/Registering/Registered/ Inactive/Rejected
Example: xStatus H323 Gatekeeper Status *s H323 Gatekeeper Status: Registered ** end
xStatus H323 Mode Reason
Shows whether there is a conflict between H.323 settings and xStatus H323 Mode Status. "": When H.323 is set to On and there is no conflict between H.323 Mode configuration and the rest of the system settings. "SIP is enabled": When H.323 Mode is set to On and SIP is enabled on a system that does not support the two simultaneously. "Not available": When a system does not support H.323.
Requires user role: ADMIN, USER
Value space of the result returned: String
Example: xStatus H323 Mode Reason *s H323 Mode Reason: "" ** end

xStatus H323 Mode Status
Shows the status for H.323 registration. Enabled: Registration is enabled. Disabled: Registration is disable, because SIP is enabled.
Requires user role: ADMIN, USER
Value space of the result returned: Enabled/Disabled
Example: xStatus H323 Mode Status *s H323 Mode Status: "Disabled" ** end

API Reference Guide
Appendices

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

150

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

HttpFeedback status
xStatus HttpFeedback [1..4] Expression [1..15]
Shows the feedback from the HTTP server. There can be up to 15 expressions for each URL. See the xCommand HttpFeedback commands for more information.
Requires user role: ADMIN, USER Value space of the result returned:
String
xStatus HttpFeedback [1..4] Format
Shows the format of the HTTP Feedback feedback from the HTTP server.
Requires user role: ADMIN, USER Value space of the result returned:
XML/JSON Example:
xStatus HttpFeedback 1 Format *s HttpFeedback 1 Format: XML ** end
xStatus HttpFeedback [1..4] URL
Shows the URL (Uniform Resource Locator) of the HTTP server. There can be up to three HTTP servers, specified by the URL.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus HttpFeedback 1 URL *s HttpFeedback 1 URL: "http://tms.company.com/tms/public/feedback/code.aspx" ** end

MediaChannels status
xStatus MediaChannels Call [n] Channel [n] Audio Channels
Shows the number of incoming or outgoing audio channels.
Requires user role: ADMIN, USER Value space of the result returned:
Integer Example:
xStatus MediaChannels Call 27 Channel 327 Audio Channels *s MediaChannels Call 27 Channel 327 Audio Channels: 1 ** end
xStatus MediaChannels Call [n] Channel [n] Audio Mute
Audio mute status of the incoming audio.
Requires user role: ADMIN, USER Value space of the result returned:
True/False Example:
xStatus MediaChannels Call 27 Channel 327 Audio Mute *s MediaChannels Call 27 Channel 327 Audio Mute: False ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

151

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xStatus MediaChannels Call [n] Channel [n] Audio Protocol
Shows the audio algorithm of the incoming or outgoing audio. AACLD: The AAC-LD is an MPEG-4 Low Delay Audio Coder audio compression format. G711A: The G.711 A-law algorithm is an ITU-T standard for audio compression. G711Mu: The G.711 Mu-law algorithm is an ITU-T standard for audio compression. G722: The G.722 algorithm is an ITU-T standard for audio compression. G7221: The G.722.1 algorithm is an ITU-T standard for audio compression. G7221C: The G.722.1 annex C algorithm is an ITU-T standard for audio compression. G723_1: The G.723.1 algorithm is an ITU-T standard for audio compression. G728: The G.728 algorithm is an ITU-T standard for audio compression. G729: The G.729 algorithm is an ITU-T standard for audio compression. G729A: The G.729 annex A algorithm is an ITU-T standard for audio compression. G729AB: The G.729 annex A and B algorithm is an ITU-T standard for audio compression. Off: No audio. Opus: Opus is a royalty-free IETF standard for audio compression.
Requires user role: ADMIN, USER
Value space of the result returned: AACLD/G711A/G711Mu/G722/G7221/G7221C/G723_1/G728/G729/G729A/G729AB/Off/Opus
Example: xStatus MediaChannels Call 27 Channel 327 Audio Protocol *s MediaChannels Call 27 Channel 327 Audio Protocol: AACLD ** end

xStatus MediaChannels Call [n] Channel [n] Direction
Shows the direction of the call. Incoming: The call is an incoming call. Outgoing: The call is an outgoing call.
Requires user role: ADMIN, USER Value space of the result returned:
Incoming/Outgoing Example:
xStatus MediaChannels Call 27 Channel 327 Direction *s MediaChannels Call 27 Channel 327 Direction: Incoming ** end
xStatus MediaChannels Call [n] Channel [n] Encryption
Shows the encryption status for audio or video on the incoming or outgoing call.
Requires user role: ADMIN, USER Value space of the result returned:
On/Off Example:
xStatus MediaChannels Call 27 Channel 327 Encryption *s MediaChannels Call 27 Channel 327 Encryption: On ** end
xStatus MediaChannels Call [n] Channel [n] NetStat Bytes
Shows the number of bytes for audio, video or data on the incoming or outgoing channel.
Requires user role: ADMIN, USER Value space of the result returned:
Integer Example:
xStatus MediaChannels Call 27 Channel 327 NetStat Bytes *s MediaChannels Call 27 Channel 327 NetStat Bytes: 496640 ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

152

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xStatus MediaChannels Call [n] Channel [n] NetStat ChannelRate
Shows the bandwidth for audio, video or data on the incoming or outgoing channel.
Requires user role: ADMIN, USER Value space of the result returned:
Integer Example:
xStatus MediaChannels Call 27 Channel 327 NetStat ChannelRate *s MediaChannels Call 27 Channel 327 NetStat ChannelRate: 128000 ** end
xStatus MediaChannels Call [n] Channel [n] NetStat Jitter
Shows the jitter for audio, video or data at the present moment on the incoming or outgoing channel, as specified by RFC 3550.
Requires user role: ADMIN, USER Value space of the result returned:
Integer Example:
xStatus MediaChannels Call 27 Channel 327 NetStat Jitter *s MediaChannels Call 27 Channel 327 NetStat Jitter: 2 ** end
xStatus MediaChannels Call [n] Channel [n] NetStat LastIntervalLost
Shows the number of packets lost for audio, video or data during the last interval on the incoming or outgoing channels.
Requires user role: ADMIN, USER Value space of the result returned:
Integer Example:
xStatus MediaChannels Call 27 Channel 327 NetStat LastIntervalLost *s MediaChannels Call 27 Channel 327 NetStat LastIntervalLost: 0 ** end

xStatus MediaChannels Call [n] Channel [n] NetStat LastIntervalReceived
Shows the number of packets received for audio, video or data during the last interval on the incoming or outgoing channels.
Requires user role: ADMIN, USER Value space of the result returned:
Integer Example:
xStatus MediaChannels Call 27 Channel 327 NetStat LastIntervalReceived *s MediaChannels Call 27 Channel 327 NetStat LastIntervalReceived: 289 ** end
xStatus MediaChannels Call [n] Channel [n] NetStat Loss
Shows the number of packets lost for audio, video or data on the incoming or outgoing channels.
Requires user role: ADMIN, USER Value space of the result returned:
Integer Example:
xStatus MediaChannels Call 27 Channel 327 NetStat Loss *s MediaChannels Call 27 Channel 327 NetStat Loss: 0 ** end
xStatus MediaChannels Call [n] Channel [n] NetStat MaxJitter
Shows the maximum jitter for audio, video or data that has been measured during last interval (about 5 seconds).
Requires user role: ADMIN, USER Value space of the result returned:
Integer Example:
xStatus MediaChannels Call 27 Channel 327 NetStat MaxJitter *s MediaChannels Call 27 Channel 327 NetStat MaxJitter: 2 ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

153

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xStatus MediaChannels Call [n] Channel [n] NetStat Packets
Shows the number of packets that was received or sent for audio, video or data on the incoming or outgoing channels.
Requires user role: ADMIN, USER Value space of the result returned:
Integer Example:
xStatus MediaChannels Call 27 Channel 327 NetStat Packets *s MediaChannels Call 27 Channel 327 NetStat Packets: 1551 ** end
xStatus MediaChannels Call [n] Channel [n] ParticipantId
Shows the ID of the Active Control participant on the incoming audio or video channel.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus MediaChannels Call 27 Channel 327 ParticipantId *s MediaChannels Call 27 Channel 327 ParticipantId: "" ** end

xStatus MediaChannels Call [n] Channel [n] Type
Shows the media type on the incoming or outgoing channel. Audio: The media type on the incoming or outgoing channel is audio. Video: The media type on the incoming or outgoing channel is video. Data: The media type on the incoming or outgoing channel is data.
Requires user role: ADMIN, USER Value space of the result returned:
Audio/Video/Data Example:
xStatus MediaChannels Call 27 Channel 327 Type *s MediaChannels Call 27 Channel 327 Type: Audio ** end
xStatus MediaChannels Call [n] Channel [n] Video ChannelRole
Shows the role of the incoming or outgoing video channel. Main: The main video is on the incoming or outgoing video channel. Presentation: The presentation is on the incoming or outgoing video channel.
Requires user role: ADMIN, USER Value space of the result returned:
Main/Presentation Example:
xStatus MediaChannels Call 27 Channel 327 Video ChannelRole *s MediaChannels Call 27 Channel 327 Video ChannelRole: Main ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

154

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xStatus MediaChannels Call [n] Channel [n] Video FrameRate
Shows the frame rate of the incoming or outgoing video channel.
Requires user role: ADMIN, USER
Value space of the result returned: Integer
Example: xStatus MediaChannels Call 27 Channel 327 Video FrameRate *s MediaChannels Call 27 Channel 327 Video FrameRate: 30 ** end
xStatus MediaChannels Call [n] Channel [n] Video Protocol
Shows the video algorithm of the incoming or outgoing video channel. Shows the video algorithm on the incoming/outgoing video channel. H261: The H.261 algorithm is an ITU-T standard for video compression. H263: The H.263 algorithm is an ITU-T standard for video compression. H263p: The H.263p (H.263+) algorithm is an ITU-T standard for video compression. H263pp: The H.263pp (H.263++) algorithm is an ITU-T standard for video compression. H264: The H.264 algorithm (MPEG-4 AVC) is an ITU-T and ISE/IEC standard for video compression. HEVC: The HEVC (H.265) algorithm (MPEG-H part 2) is an ITU-T and ISE/IEC standard for video compression. JPEG: The JPEG algorithm is an ISO/IEC standard for video compression. MP4V: The MP4V format is an ISO/IEC file format for video compression. Off: No video.
Requires user role: ADMIN, USER
Value space of the result returned: H261/H263/H263p/H263pp/H264/HEVC/JPEG/MP4V/Off
Example: xStatus MediaChannels Call 27 Channel 327 Video Protocol *s MediaChannels Call 27 Channel 327 Video Protocol: H264 ** end

xStatus MediaChannels Call [n] Channel [n] Video ResolutionX
Shows the width (resolution in direction X) of the incoming or outgoing video.
Requires user role: ADMIN, USER Value space of the result returned:
Integer Example:
xStatus MediaChannels Call 27 Channel 327 Video ResolutionX *s MediaChannels Call 27 Channel 327 Video ResolutionX: 1920 ** end
xStatus MediaChannels Call [n] Channel [n] Video ResolutionY
Shows the width (resolution in direction Y) of the incoming or outgoing video.
Requires user role: ADMIN, USER Value space of the result returned:
Integer Example:
xStatus MediaChannels Call 27 Channel 327 Video ResolutionY *s MediaChannels Call 27 Channel 327 Video ResolutionY: 1080 ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

155

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

Network status
xStatus Network 1 CDP Address
Returns the first network address of both receiving and sending devices.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Network CDP Address *s Network 1 CDP Address: "192.0.1.20" ** end
xStatus Network 1 CDP Capabilities
Describes the functional capability for the switch in form of a device type. See documentation for CDP protocol for more information.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Network CDP Capabilities *s Network 1 CDP Capabilities: "0x0029" ** end
xStatus Network 1 CDP DeviceId
Identifies the name of the switch in form of a character string.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Network CDP DeviceId *s Network 1 CDP DeviceId: "123456.company.com" ** end

xCommand

xStatus

API Reference Guide
Appendices

xStatus Network 1 CDP Duplex
Indicates the status (duplex configuration) of the CDP broadcast interface. Used by network operators to diagnose connectivity problems between adjacent network elements.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Network CDP Duplex *s Network 1 CDP Duplex: "Full" ** end
xStatus Network 1 CDP Platform
Returns the hardware platform name of the switch connected to the endpoint.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Network CDP Platform *s Network 1 CDP Platform: "cisco WS-C3750X-48P" ** end
xStatus Network 1 CDP PortID
Returns the identification the switch uses of the port the endpoint is connected to.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Network CDP PortID *s Network 1 CDP PortID: "GigabitEthernet1/0/23" ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

156

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xStatus Network 1 CDP PrimaryMgmtAddress
Returns the management address used to configure and monitor the switch the endpoint is connected to.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Network CDP PrimaryMgmtAddress *s Network 1 CDP PrimaryMgmtAddress: "10.1.1.2" ** end
xStatus Network 1 CDP SysName
Returns the SysName as configured in the switch the endpoint is connected to.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Network CDP SysName *s Network 1 CDP SysName: "" ** end
xStatus Network 1 CDP SysObjectID
Returns the SysObjectID as configured in the switch the endpoint is connected to.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Network CDP SysObjectID *s Network 1 CDP SysObjectID: "" ** end

xCommand

xStatus

API Reference Guide
Appendices

xStatus Network 1 CDP Version
Returns information about the software release version the switch is running.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Network 1 CDP Version *s Network 1 CDP Version: "Cisco IOS Software, C3560CX Software (C3560CXUNIVERSALK9-M), Version 15.2(3)E, RELEASE SOFTWARE (fc4)*Technical Support: http://www.cisco.com/techsupport*Copyright (c) 1986-2014 by Cisco Systems, Inc.*Compiled Sun 07-Dec-14 13:15 by prod _ rel _ team" ** end
xStatus Network 1 CDP VoIPApplianceVlanID
Identifies the VLAN used for VoIP traffic from the endpoint to the switch. For more information see documentation of the IEEE 802.1Q protocol.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Network CDP VoIPApplianceVlanID *s Network 1 CDP VoIPApplianceVlanID: "300" ** end
xStatus Network 1 CDP VTPMgmtDomain
Returns the switch's configured VTP management domain name-string.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Network CDP VTPMgmtDomain *s Network 1 CDP VTPMgmtDomain: "anyplace" ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

157

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xStatus Network 1 DNS Domain Name
Shows the domain name.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Network 1 DNS Domain Name *s Network 1 DNS Domain Name: "www.example.com www.example.int" ** end
xStatus Network 1 DNS Server [1..5] Address
Shows the IP address of the DNS server.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Network 1 DNS Server 1. Address *s Network 1 DNS Server 1 Address: "192.0.2.60" ** end
xStatus Network 1 Ethernet MacAddress
Shows the MAC (Media Access Control) address for the Ethernet interface.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Network 1 Ethernet MacAddress *s Network 1 Ethernet MacAddress: "00:50:60:02:FD:C7" ** end

xCommand

xStatus

API Reference Guide
Appendices

xStatus Network 1 Ethernet Speed
Shows the Ethernet speed in Mbps. The speed can be in full-duplex or half-duplex.
Requires user role: ADMIN, USER Value space of the result returned:
10half/10full/100half/100full/1000full Example:
xStatus Network 1 Ethernet Speed *s Network 1 Ethernet Speed: "100full" ** end
xStatus Network 1 IPv4 Address
Shows the IPv4 address that uniquely identifies this system.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Network 1 IPv4 Address *s Network 1 IPv4 Address: "192.0.2.149" ** end
xStatus Network 1 IPv4 Gateway
Shows the address of the IPv4 gateway.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Network 1 IPv4 Gateway *s Network 1 IPv4 Gateway: "192.0.2.10" ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

158

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xStatus Network 1 IPv4 SubnetMask
Shows the subnet mask which determines which subnet an IPv4 address belongs to.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Network 1 IPv4 SubnetMask *s Network 1 IPv4 SubnetMask: "255.255.255.0" ** end
xStatus Network 1 IPv6 Address
Shows the IPv6 address that uniquely identifies this system.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Network 1 IPv6 Address *s Network 1 IPv6 Address: "" ** end
xStatus Network 1 IPv6 Gateway
Shows the address of the IPv6 gateway.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Network 1 IPv6 Gateway *s Network 1 IPv6 Gateway: "" ** end

xCommand

xStatus

API Reference Guide
Appendices

xStatus Network 1 VLAN Voice VlanId
The feedback shows the VLAN Voice ID; or Off if the VLAN Voice Mode is not enabled.
Requires user role: ADMIN, USER
Value space of the result returned: Off/1..4094
Example: xStatus Network 1 VLAN Voice VlanId *s Network 1 VLAN Voice VlanId: "Off" ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

159

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

NetworkServices status
xStatus NetworkServices NTP CurrentAddress
Returns the address of the NTP server that is currently in use.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus NetworkServices NTP CurrentAddress *s NetworkServices NTP CurrentAddress: "123.254.15.121" ** end
xStatus NetworkServices NTP Server [n] Address
Returns the address of the NTP server(s) the codec is using.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus NetworkServices NTP Address *s NetworkServices NTP Address: "12.104.193.12 64.104.222.16 144.254.15.121" ** end

xCommand

xStatus

API Reference Guide
Appendices

xStatus NetworkServices NTP Status
Returns the status of the endpoints synchronizing with the NTP server. Discarded: The NTP result has been discarded. Synced: The system is in sync with the NTP server. NotSynced: The system is not in sync with the NTP server. Unknown: The state of the synchronization is unknown. Off: No synchronization with the NTP server.
Requires user role: ADMIN, USER
Value space of the result returned: Discarded/Synced/NotSynced/Unknown/Off
Example: xStatus NetworkServices NTP Status *s NetworkServices NTP Status: Synced ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

160

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

Peripherals status
xStatus Peripherals ConnectedDevice [n] HardwareInfo
Shows hardware information about connected device.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL Value space of the result returned:
String Example:
xStatus Peripherals ConnectedDevice 1007 HardwareInfo *s Peripherals ConnectedDevice 1007 HardwareInfo: "1122330-0" ** end
xStatus Peripherals ConnectedDevice [n] ID
Shows the MAC-address of the connected device.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL Value space of the result returned:
String Example:
xStatus Peripherals ConnectedDevice 1007 ID *s Peripherals ConnectedDevice 1007 ID: "00:10:20:20:be:21" ** end
xStatus Peripherals ConnectedDevice [n] Name
Shows the product name of connected device.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL Value space of the result returned:
String Example:
xStatus Peripherals ConnectedDevice 1007 Name *s Peripherals ConnectedDevice 1007 Name: "Cisco TelePresence Touch" ** end

xCommand

xStatus

API Reference Guide
Appendices

xStatus Peripherals ConnectedDevice [n] SoftwareInfo
Shows information of the software version running on the connected device.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL Value space of the result returned:
String Example:
xStatus Peripherals ConnectedDevice 1007 SoftwareInfo *s Peripherals ConnectedDevice 1007 SoftwareInfo: "TI7.2.0" ** end
xStatus Peripherals ConnectedDevice [n] Status
Shows peripheral devices that are currently connected to the endpoint.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL Value space of the result returned:
Connected/ResponseTimedOut Example:
xStatus Peripherals ConnectedDevice 1001 Status *s Peripherals ConnectedDevice 1001 Status: Connected ** end
xStatus Peripherals ConnectedDevice [n] Type
Shows the peripheral types that are connected to the endpoint. Note: The value space Camera only shows Precision 60 cameras.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL Value space of the result returned:
Byod/Camera/ControlSystem/ISDNLink/Other/SpeakerTrack/TouchPanel Example:
xStatus Peripherals ConnectedDevice 1001 Type *s Peripherals ConnectedDevice 1001 Type: TouchPanel ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

161

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xStatus Peripherals ConnectedDevice [n] UpgradeStatus
Shows the status of the previous software upgrade on the currently connected peripherals.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL
Value space of the result returned: Downloading/Failed/Installing/InstallationReady/None/Succeeded/Rebooting/Retrying/ Aborted/Paused
Example: xStatus Peripherals ConnectedDevice 1001 UpgradeStatus *s Peripherals ConnectedDevice 1001 UpgradeStatus: None ** end

xCommand

xStatus

API Reference Guide
Appendices

Provisioning status
xStatus Provisioning CUCM ExtensionMobility Enabled
Shows if Extension Mobility is enabled for a CUCM registered device.
Requires user role: ADMIN, USER Value space of the result returned:
True/False Example:
xStatus Provisioning CUCM ExtensionMobility Enabled *s Provisioning CUCM ExtensionMobility Enabled: False ** end
xStatus Provisioning CUCM ExtensionMobility LastLoggedInUserId
Returns the user id that was last logged in to the system. Only in use if CUCM Extension Mobility is enabled, and CUCM is configured to remember the last logged in user on an endpoint.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Provisioning CUCM ExtensionMobility LastLoggedInUserId *s Provisioning CUCM ExtensionMobility LastLoggedInUserId: "User 1" ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

162

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xStatus Provisioning CUCM ExtensionMobility LoggedIn
Shows if someone is logged in to Extension Mobility or not.
Requires user role: ADMIN, USER Value space of the result returned:
True/False Example:
xStatus Provisioning CUCM ExtensionMobility LoggedIn *s Provisioning CUCM ExtensionMobility LoggedIn: False ** end
xStatus Provisioning Software Current CompletedAt
Shows date and time for when the current software upgrade was completed.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Provisioning Software Current CompletedAt *s Provisioning Software Current CompletedAt: "2011-06-07T07:20:03Z" ** end
xStatus Provisioning Software Current URL
Shows the URL that the current software was uploaded from.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Provisioning Software Current URL *s Provisioning Software Current URL: "http://.../s52020ce8 _ 0 _ 0.pkg" ** end

xCommand

xStatus

API Reference Guide
Appendices

xStatus Provisioning Software Current VersionId
Shows the version ID of the current software.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Provisioning Software Current VersionId *s Provisioning Software Current VersionId: "s52020ce8 _ 0 _ 0.pkg" ** end
xStatus Provisioning Software UpgradeStatus LastChange
Shows the date and time for the latest software upgrade.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Provisioning Software UpgradeStatus LastChange *s Provisioning Software UpgradeStatus LastChange: "2011-06-07T07:20:03Z" ** end
xStatus Provisioning Software UpgradeStatus Message
Shows the system message for the software upgrade.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Provisioning Software UpgradeStatus Message *s Provisioning Software UpgradeStatus Message: "" ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

163

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xStatus Provisioning Software UpgradeStatus Phase
Shows the phase of the software upgrade.
Requires user role: ADMIN, USER Value space of the result returned:
None/DownloadPending/FormingHierarchy/Downloading/DownloadPaused/DownloadDone/ Seeding/AboutToInstallUpgrade/Postponed/PeripheralsReady/UpgradingPeripherals/Installing/ InstallingPeripherals Example: xStatus Provisioning Software UpgradeStatus Phase *s Provisioning Software UpgradeStatus Phase: None ** end
xStatus Provisioning Software UpgradeStatus SessionId
Shows the ID of the session for the software upgrade.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Provisioning Software UpgradeStatus SessionId *s Provisioning Software UpgradeStatus SessionId: "" ** end
xStatus Provisioning Software UpgradeStatus Status
Shows the status of the software upgrade.
Requires user role: ADMIN, USER Value space of the result returned:
None/InProgress/Failed/InstallationFailed/Succeeded Example:
xStatus Provisioning Software UpgradeStatus Status *s Provisioning Software UpgradeStatus Status: None ** end

xStatus Provisioning Software UpgradeStatus URL
Shows the URL that the new software currently is being uploaded and installed from.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Provisioning Software UpgradeStatus URL *s Provisioning Software UpgradeStatus URL: "http://.../s52020ce8 _ 0 _ 0.pkg" ** end
xStatus Provisioning Software UpgradeStatus VersionId
Shows the version ID of the software currently being uploaded and installed.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Provisioning Software UpgradeStatus VersionId *s Provisioning Software UpgradeStatus VersionId: "s52010ce8 _ 0 _ 0.pkg" ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

164

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xStatus Provisioning Status
Shows the status of the provisioning. Failed: The provisioning failed. AuthenticationFailed: The authentication failed. Provisioned: The endpoint is provisioned. Idle: The provisioning is not active. NeedConfig: The endpoint needs to be configured. ConfigError: An error occurred during configuration.
Requires user role: ADMIN, USER
Value space of the result returned: Failed/AuthenticationFailed/Provisioned/Idle/NeedConfig/ConfigError
Example: xStatus Provisioning Status *s Provisioning Status: Provisioned ** end

xCommand

xStatus

API Reference Guide
Appendices

Proximity status
xStatus Proximity Services Availability
Shows whether proximity services are available on the endpoint. Available: Proximity mode has been enabled with the command xConfiguration Proximity Mode and one or more of the proximity services have been enabled with xConfiguration Proximity Services commands. Disabled: Proximity mode has been disabled with xConfiguration Proximity Mode, or none of the services have been enabled with the xConfiguration Proximity Services commands. Deactivated: Proximity services have been deactivated with the command xCommand Proximity Services Deactivate.
Requires user role: ADMIN, USER
Example: xStatus Proximity Services Availability *s Proximity Services Availability: Disabled ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

165

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Security status
xStatus Security FIPS Mode
Shows the FIPS mode status.
Requires user role: ADMIN, USER Value space of the result returned:
On/Off Example:
xStatus Security FIPS Mode *s Security FIPS Mode: Off ** end
xStatus Security Persistency CallHistory
Shows whether call history logging is set to persistent or non-persistent mode. Persistent is the default mode.
Requires user role: ADMIN, USER Value space of the result returned:
NonPersistent/Persistent Example:
xStatus Security Persistency CallHistory *s Security Persistency CallHistory: Persistent ** end

xStatus Security Persistency Configurations
Shows whether the systems all configurations are set to persistent or non-persistent mode. Persistent is the default mode.
Requires user role: ADMIN, USER Value space of the result returned:
NonPersistent/Persistent Example:
xStatus Security Persistency Configurations *s Security Persistency Configurations: Persistent ** end
xStatus Security Persistency DHCP
Shows whether DHCP logging is set to persistent or non-persistent mode. Persistent is the default mode.
Requires user role: ADMIN, USER Value space of the result returned:
NonPersistent/Persistent Example:
xStatus Security Persistency DHCP *s Security Persistency DHCP: Persistent ** end
xStatus Security Persistency InternalLogging
Shows whether internal logging is set to persistent or non-persistent mode. Persistent is the default mode.
Requires user role: ADMIN, USER Value space of the result returned:
NonPersistent/Persistent Example:
xStatus Security Persistency InternalLogging *s Security Persistency InternalLogging: Persistent ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

166

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xStatus Security Persistency LocalPhonebook
Shows whether local phone book is set to persistent or non-persistent mode. Persistent is the default mode.
Requires user role: ADMIN, USER
Value space of the result returned: NonPersistent/Persistent
Example: xStatus Security Persistency LocalPhonebook *s Security Persistency LocalPhonebook: Persistent ** end

SIP status
xStatus SIP AlternateURI Alias [n] URI
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus SIP AlternateURI Alias *s SIP AlternateURI Alias URI: "" ** end
xStatus SIP AlternateURI Primary [n] URI
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus SIP AlternateURI Primary *s SIP AlternateURI Primary URI: "" ** end
xStatus SIP Authentication
Shows which authentication mechanism is used when registering to the SIP Proxy Server. Digest: Uses the Digest access authentication method, as specified by RFC 2069. NTLM: Uses the NTLM authentication method, which is a Microsoft authentication protocol. Off: No authentication mechanism is used.
Requires user role: ADMIN, USER Value space of the result returned:
Digest/Off Example:
xStatus SIP Authentication *s SIP Authentication: Off ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

167

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xStatus SIP CallForward DisplayName
Returns the URI that is displayed on the user interface for the forwarded call.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus SIP CallForward DisplayName *s SIP CallForward DisplayName: "" ** end
xStatus SIP CallForward Mode
Indicates whether the call forward mode for SIP is set to on or off.
Requires user role: ADMIN, USER Value space of the result returned:
On/Off Example:
xStatus SIP CallForward Mode *s SIP CallForward Mode: Off ** end
xStatus SIP CallForward URI
Indicates the address the incoming calls are directed to when call forward mode is set on.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus SIP CallForward URI *s SIP CallForward URI: "" ** end

xCommand

xStatus

API Reference Guide
Appendices

xStatus SIP Mailbox MessagesWaiting
Indicates how many new messages are in the mailbox.
Requires user role: ADMIN, USER Value space of the result returned:
Integer Example:
xStatus SIP Mailbox MessagesWaiting *s SIP Mailbox MessagesWaiting: 0 ** end
xStatus SIP Mailbox URI
Returns the URI for your SIP mailbox.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus SIP Mailbox URI *s SIP Mailbox URI: "12345678" ** end
xStatus SIP Proxy [n] Address
Shows the address of the SIP Proxy that the system communicates with.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus SIP Proxy 1 Address *s SIP Proxy 1 Address: "192.0.2.50" ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

168

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xStatus SIP Proxy [n] Status
Shows the status of the communication between the endpoint and the SIP Proxy server. Active: The communication between the endpoint and the SIP Proxy is active. DNSFailed: The attempt to establish communication to the DNS server failed. Off: There is no communication between the endpoint and the SIP Proxy. Timeout: The attempt to establish communication to the SIP Proxy timed out. UnableTCP: The system is unable to use TCP as the transport method. UnableTLS: The system is unable to use TLS as the transport method. Unknown: The status of the communication is not known. AuthenticationFailed: Wrong user name or password.
Requires user role: ADMIN, USER
Value space of the result returned: Active/DNSFailed/Off/Timeout/UnableTCP/UnableTLS/Unknown/AuthenticationFailed
Example: xStatus SIP Proxy 1 Status *s SIP Proxy 1 Status: Active ** end
xStatus SIP Registration [n] Authentication
Shows which authentication mechanism is used when registering to the SIP Proxy Server. Digest: Uses the Digest access authentication method, as specified by RFC 2069. NTLM: Uses the NTLM authentication method, which is a Microsoft authentication protocol. Off: No authentication mechanism is used.
Requires user role: ADMIN, USER
Value space of the result returned: Digest/Off
Example: xStatus SIP Registration 1 Authentication *s SIP Registration 1 Authentication: Off ** end

xCommand

xStatus

API Reference Guide
Appendices

xStatus SIP Registration [n] Reason
Shows a message to explain the reason why the SIP registration failed.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus SIP Registration 1 Reason *s SIP Registration 1 Reason: "404 Not Found" ** end
xStatus SIP Registration [n] Status
Shows the status of the registration to the SIP Proxy Server. Deregister: The system is in the process of de-registering to the SIP Proxy. Failed: The system failed to register to the SIP Proxy. Inactive: The system is not registered to any SIP Proxy. Registered: The system is registered to the SIP Proxy. Registering: The system is in the process of registering to the SIP Proxy.
Requires user role: ADMIN, USER Value space of the result returned:
Deregister/Failed/Inactive/Registered/Registering Example:
xStatus SIP Registration 1 Status *s SIP Registration 1 Status: Registered ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

169

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xStatus SIP Registration [n] URI
Shows the URI used for registration to the SIP Proxy server.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus SIP Registration 1 URI *s SIP Registration 1 URI: "firstname.lastname@company.com" ** end
xStatus SIP Secure
Shows the encryption status of the signaling with the SIP Proxy server.
Requires user role: ADMIN, USER Value space of the result returned:
True/False Example:
xStatus SIP Secure *s SIP Secure: True ** end

xCommand

xStatus

API Reference Guide
Appendices

xStatus SIP Verified
Shows whether or not the SSL certificate of the server that the video system / codec tries to register to is included in the codec's trusted CA-list. The server is typically a Cisco VCS or CUCM. True: The server's SIP certificate is checked against the trusted CA-list on the codec and found valid. Additionally, the fully qualified domain name of the server matches the valid certificate. False: A TLS connection is not set up because the SIP certificate verification failed or the domain name did not match. Note that the status also returns False when TLS is not used (xConfiguration SIP DefaultTransport not set to TLS) or certificate verification is switched off (SIP TlsVerify: Off. This setting is accessible through your products web interface).
Requires user role: ADMIN, USER
Value space of the result returned: True/False
Example: xStatus SIP Verified *s SIP Verified: False ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

170

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

Standby status
xStatus Standby State
Shows whether the system is in standby mode or not. Standby: The system is in standby state. EnteringStandby: The system is entring the standby state. Off: The system is not in standby.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL Value space of the result returned:
Standby/EnteringStandby/Off Example:
xStatus Standby State *s Standby State: Off ** end

xCommand

xStatus

API Reference Guide
Appendices

SystemUnit status
xStatus SystemUnit Hardware Module CompatibilityLevel
The Cisco TelePresence endpoints are using a NAND flash memory for general storage. The endpoints running TC software are manufactured with a new version of the flash memory. Endpoints having the new version of the flash memory must run software TC4.2.1 or later. Some previous TC software versions are updated to support the new flash memory. Please check the release note to find if the new version of the flash memory is supported. If your endpoint does not have the CompatibilityLevel command it does not have the new flash memory installed. The result returned when running the command is either 0 or 1: 0 = The system does not have the new flash memory installed. 1 = The system has the new flash memory installed. If downgraded, it can only be downgraded to previous TC software versions having support for the new version of the flash memory.
Requires user role: ADMIN, USER
Value space of the result returned: 1/0
Example: xStatus SystemUnit Hardware Module CompatibilityLevel *s SystemUnit Hardware Module CompatibilityLevel: 1 ** end
xStatus SystemUnit Hardware Module SerialNumber
Shows the serial number of the hardware module in the codec.
Requires user role: ADMIN, USER
Value space of the result returned: String
Example: xStatus SystemUnit Hardware Module SerialNumber *s SystemUnit Hardware Module SerialNumber: "F9AA99A00090" ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

171

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xStatus SystemUnit Hardware Monitoring Fan [n] Status
The feedback shows the speed (rpm) for the specified fan.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus SystemUnit Hardware Monitoring Fan 1 Status *s SystemUnit Hardware Monitoring Fan 1 Status: "locked on 1096 rpm" ** end
xStatus SystemUnit Hardware Temperature
Shows the current maximum temperature (degree Celsius) measured in the codec/system.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus SystemUnit Hardware Temperature *s SystemUnit Hardware Temperature: "64.0" ** end
xStatus SystemUnit Notifications Notification [n] Text
Lists text related to important system notifications. Notifications are issued e.g. when a system was rebooted because of a software upgrade, or when a factory reset has been performed. All the notifications can be removed from the list by issuing the xCommand SystemUnit Notifications RemoveAll command.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus SystemUnit Notifications Notification 1 Text *s SystemUnit Notifications Notification 1 Text: "OK" ** end

xStatus SystemUnit Notifications Notification [n] Type
Lists the system notification types. Notifications are issued e.g. when a system is rebooted because of a software upgrade, or when a factory reset is performed. FactoryResetOK: This value is returned after a successful factory reset. FactoryResetFailed: This value is returned after a failed factory reset attempt. SoftwareUpgradeOK: This value is returned after a successful software upgrade. SoftwareUpgradeFailed: This value is returned after a failed software upgrade attempt. RebootRequired: This value is returned when a reboot is required. Other: This value is returned for any other notifications. All the notifications can be removed from the list by issuing the xCommand SystemUnit Notifications RemoveAll command.
Requires user role: ADMIN, USER
Value space of the result returned: FactoryResetOK, FactoryResetFailed, SoftwareUpgradeOK, SoftwareUpgradeFailed, RebootRequired, Other
Example: xStatus SystemUnit Notifications Notification 1 Type *s SystemUnit Notifications Notification 1 Type: SoftwareUpgradeOK ** end
xStatus SystemUnit ProductId
Shows the product identity.
Requires user role: ADMIN, USER
Value space of the result returned: String
Example: xStatus SystemUnit ProductId *s SystemUnit ProductId: "Cisco TelePresence Codec SX80" ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

172

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xStatus SystemUnit ProductPlatform
Shows the product platform.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus SystemUnit ProductPlatform *s SystemUnit ProductPlatform: "SX80" ** end
xStatus SystemUnit ProductType
Shows the product type.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus SystemUnit ProductType *s SystemUnit ProductType: "Cisco Codec" ** end
xStatus SystemUnit Software DisplayName
Shows the name of the software that is installed on the codec, as it is displayed in the UI.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus SystemUnit Software DisplayName *s SystemUnit Software DisplayName: "Display Name" ** end

xCommand

xStatus

API Reference Guide
Appendices

xStatus SystemUnit Software Name
Shows the name of the software that is installed on the codec.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus SystemUnit Software Name *s SystemUnit Software Name: "s52010" ** end
xStatus SystemUnit Software OptionKeys MultiSite
Shows if the system has the option key installed that supports the MultiSite functionality.
Requires user role: ADMIN, USER Value space of the result returned:
False/True Example:
xStatus SystemUnit Software OptionKeys MultiSite *s SystemUnit Software OptionKeys MultiSite: "true" ** end
xStatus SystemUnit Software OptionKeys RemoteMonitoring
Shows whether the system has the remote monitoring option key installed. Remote monitoring option key enables snapshots from the web interface, and from a remote paired Touch 10.
Requires user role: ADMIN, USER Value space of the result returned:
False/True Example:
xStatus SystemUnit Software OptionKeys RemoteMonitoring *s SystemUnit Software OptionKeys RemoteMonitoring: "true" ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

173

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xStatus SystemUnit Software ReleaseDate
Shows the release date of the software installed on the codec.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus SystemUnit Software ReleaseDate *s SystemUnit Software ReleaseDate: "2015-05-05" ** end
xStatus SystemUnit Software Version
Shows the software version installed on the codec.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus SystemUnit Software Version *s SystemUnit Software Version: "CE8.0.0" ** end
xStatus SystemUnit State NumberOfActiveCalls
Shows the number of active calls.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL Value space of the result returned:
0..5 Example:
xStatus SystemUnit State NumberOfActiveCalls *s SystemUnit State NumberOfActiveCalls: 0 ** end

xCommand

xStatus

API Reference Guide
Appendices

xStatus SystemUnit State NumberOfInProgressCalls
Shows the number of calls in progress.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL Value space of the result returned:
0..5 Example:
xStatus SystemUnit State NumberOfInProgressCalls *s SystemUnit State NumberOfInProgressCalls: 0 ** end
xStatus SystemUnit State NumberOfSuspendedCalls
Shows the number of suspended calls.
Requires user role: ADMIN, USER Value space of the result returned:
0..5 Example:
xStatus SystemUnit State NumberOfSuspendedCalls *s SystemUnit State NumberOfSuspendedCalls: 0 ** end
xStatus SystemUnit Uptime
Shows the number of seconds since the last restart of the codec.
Requires user role: ADMIN, USER Value space of the result returned:
Integer Example:
xStatus SystemUnit Uptime *s SystemUnit Uptime: 597095 ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

174

Cisco TelePresence SX20 Codec

Introduction

About the API

Time status
xStatus Time SystemTime
Returns the date and time set on the system.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
String Example:
xStatus Time SystemTime *s Time SystemTime: "2014-04-25T10:04:03Z" ** end

xConfiguration

xCommand

xStatus

USB status
xStatus USB Device [n] State
Shows the USB device state.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
Empty/Unsupported/Supported Example:
xStatus USB Device 1 State *s USB Device 1 State: Supported ** end
xStatus USB Device [n] Type
Shows the USB device type.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
Ethernet/Unknown/None Example:
xStatus USB Device 1 Type *s USB Device 1 Type: Ethernet ** end

API Reference Guide
Appendices

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

175

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

UserInterface status
xStatus UserInterface ContactInfo ContactMethod [n] Number
Returns the system's active contact information. This address is used to reach this endpoint.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus UserInterface ContactInfo ContactMethod Number *s UserInterface ContactInfo ContactMethod 1 Number: "12345678" ** end
xStatus UserInterface ContactInfo Name
Returns the system's active contact name. The result depends on which protocol, if any, the system is registered on. The automatically set contact name may have been overridden with the command xConfiguration UserInterface ContactInfo Type. This results in a diagnostics warning about contact mismatch.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus UserInterface ContactInfo Name *s UserInterface ContactInfo Name: "MySystem" ** end
xStatus UserInterface Extensions Widget [n] Value
Returns the value for a widget. Widgets are used in custom panels, for example in-room controls, that are added to the user interface. The value space depends on the widget type. The value is an empty string until a value is set with the UserInterface Extensions Widget SetValue command.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL Value space of the result returned:
String

xStatus UserInterface Extensions Widget [n] WidgetId
Returns the unique identifier for a widget. Widgets are used in custom panels, for example in-room controls, that are added to the user interface.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL
Value space of the result returned: String

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

176

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Video status
xStatus Video ActiveSpeaker PIPPosition
Shows the position of the active speaker's image on the screen.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/LowerRight Example:
xStatus Video ActiveSpeaker PIPPosition *s Video PIP ActiveSpeaker Position: UpperCenter ** end
xStatus Video Input Connector [n] Connected
Shows whether is something is connected to the specified connector. Not all connections can be detected.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
False/True/Unknown Example:
xStatus Video Input Connector 1 Connected *s Video Input Connector 1 Connected: True ** end

xStatus Video Input Connector [n] SignalState
Shows the signal state for the specified input. Unknown: The signal format is unknown. OK: A signal is detected and the signal format is supported. Unsupported: A signal is detected, but the signal format is not supported.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
OK/Unknown/Unsupported Example:
xStatus Video Input Connector 1 SignalState *s Video Input Connector 1 SignalState: OK ** end
xStatus Video Input Connector [n] SourceId
Shows the identifer of the input source that the connector is associated with.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
Integer Example:
xStatus Video Input Connector 1 SourceId *s Video Input Connector 1 SourceId: 1 ** end
xStatus Video Input Connector [n] Type
Shows which connector type it is.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
Composite/DVI/HDMI/Unknown/YC Example:
xStatus Video Input Connector 1 Type *s Video Input Connector 1 Type: HDMI ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

177

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xStatus Video Input MainVideoSource
Returns the local video input currently used as the main source. The main video source is set with the xConfiguration Video DefaultMainSource command.
Requires user role: ADMIN, USER Value space of the result returned:
Integer Example:
xStatus Video Input MainVideoSource *s Video Input MainVideoSource: 1 ** end
xStatus Video Input Source [n] ConnectorId
Shows the identifier of the connector that is associated with the input source.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
Integer Example:
xStatus Video Input Source 1 ConnectorId *s Video Input Source 1 ConnectorId: 1 ** end
xStatus Video Input Source [n] FormatStatus
Shows the resolution format status for the video input source.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
Ok/OutOfRange/NotFound/Interlaced/Error/Unknown Example:
xStatus Video Input Source 1 FormatStatus *s Video Input Source 1 Resolution FormatStatus: Ok ** end

xCommand

xStatus

API Reference Guide
Appendices

xStatus Video Input Source [n] FormatType
Shows the resolution format type for the video input source.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
Unknown/AnalogCVTBlanking/AnalogCVTReducedBlanking/AnalogGTFDefault/ AnalogGTFSecondary/AnalogDiscreteTiming/AnalogDMTBlanking/AnalogCEABlanking/Digital Example: xStatus Video Input Source 1 FormatType *s Video Input Source 1 Resolution FormatType: Digital ** end
xStatus Video Input Source [n] MediaChannelId
For internal use only.
Requires user role: ADMIN, USER Value space of the result returned:
Integer Example:
xStatus Video Input Source MediaChannelId *s Video Input Source 1 MediaChannelId: 2 *s Video Input Source 2 MediaChannelId: 3 ** end
xStatus Video Input Source [n] Resolution Height
Shows the resolution height (in pixels) for the video input source.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
0..3000 Example:
xStatus Video Input Source 1 Resolution Height *s Video Input Source 1 Resolution Height: 1080 ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

178

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xStatus Video Input Source [n] Resolution RefreshRate
Shows the resolution refresh rate (Hz) for the video input source.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
0..300 Example:
xStatus Video Input Source 1 Resolution RefreshRate *s Video Input Source 1 Resolution RefreshRate: 50 ** end
xStatus Video Input Source [n] Resolution Width
Shows the resolution width (in pixels) for the video input source.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
0..4000 Example:
xStatus Video Input Source 1 Resolution Width *s Video Input Source 1 Resolution Width: 1920 ** end
xStatus Video Layout LayoutFamily Local
Shows the local screen layout family.
Requires user role: ADMIN, USER Value space of the result returned:
String Example:
xStatus Video Layout LayoutFamily Local *s Video Layout LayoutFamily Local: "equal" ** end

xCommand

xStatus

API Reference Guide
Appendices

xStatus Video Layout LayoutFamily Remote
Shows the remote screen layout family.
Requires user role: ADMIN, USER
Value space of the result returned: String
Example: xStatus Video Layout LayoutFamily Remote *s Video Layout LayoutFamily Remote: "equal" ** end
xStatus Video Monitors
Returns the monitor layout mode. Single: The same layout is shown on all monitors. Dual: The layout is distributed on two monitors. DualPresentationOnly: All participants in the call will be shown on the first monitor, while the presentation (if any) will be shown on the second monitor. Quadruple: The layout is distributed on four monitors, so that each remote participant and the presentation will be shown on separate monitors.
Requires user role: ADMIN, USER
Value space of the result returned: Single/Dual/DualPresentationOnly/Triple/TriplePresentationOnly/Quadruple
Example: xStatus Video Monitors *s Video Monitors: Single ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

179

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

xStatus Video Output Connector [n] Connected
Describes whether a device (for example a display) is connected to the output connector or not. When a display enters standby mode, the endpoint may not be able to detect it. The connector status will then return False/Unknown even if the display is physically connected. True: A device is connected to the video output connector. False: Nothing is connected to the video output connector.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned: True/False
Example: xStatus Video Output Connector 1 Connected *s Video Output Connector 1 Connected: True ** end
xStatus Video Output Connector [n] ConnectedDevice CEC DeviceType
Shows the type of CEC enabled device connected to the HDMI output the codec has detected. This information is only available when the device connected to the HDMI output has the CEC feature configured on and the codec has the configuration xConfiguration Video Output Connector [n] CEC Mode set to on.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned: Unknown/TV/Reserved/Recorder/Tuner/Playback/Audio
Example: xStatus Video Output Connector 1 ConnectedDevice CEC DeviceType *s Video Output Connector 1 ConnectedDevice CEC DeviceType: TV ** end

xStatus Video Output Connector [n] ConnectedDevice CEC Name
Returns the name of the connected device.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned: String
Example: xStatus Video Output Connector 1 ConnectedDevice CEC Name *s Video Output Connector 1 ConnectedDevice CEC 1 Name: "LG SIGNAGE TV" ** end
xStatus Video Output Connector [n] ConnectedDevice CEC PowerControl
Shows whether the codec is controlling the CEC enabled device connected to the HDMI output. This information is only available when the device connected to the HDMI output has the CEC feature configured on and the codec has the configuration xConfiguration Video Output Connector CEC Mode set to on.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned: Unknown/Ok/In progress/Failed to power on/Failed to standby
Example: xStatus Video Output Connector 1 ConnectedDevice CEC PowerControl *s Video Output Connector 1 ConnectedDevice CEC PowerControl: Ok ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

180

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xStatus Video Output Connector [n] ConnectedDevice CEC PowerStatus
Shows the state of the CEC enabled devise connected to the HDMI output. This information is only available when the device connected to the HDMI output has the CEC feature configured on and the codec has the configuration xConfiguration Video Output Connector CEC Mode set to on.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
Unknown/Ok/In progress/Failed to power on/Failed to standby Example:
xStatus Video Output Connector 1 ConnectedDevice CEC PowerStatus *s Video Output Connector 1 ConnectedDevice CEC PowerStatus: Ok ** end
xStatus Video Output Connector [n] ConnectedDevice CEC VendorId
Returns the vendor ID for the connected device.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
String Example:
xStatus Video Output Connector 1 ConnectedDevice CEC VendorId *s Video Output Connector 1 ConnectedDevice CEC 1 VendorId: "57489" ** end
xStatus Video Output Connector [n] ConnectedDevice Name
Shows the name of the monitor connected to the HDMI port as defined in the monitors EDID.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
String Example:
xStatus Video Output Connector 1 ConnectedDevice Name *s Video Output Connector 1 ConnectedDevice Name: "G2420HDBL" ** end

xCommand

xStatus

API Reference Guide
Appendices

xStatus Video Output Connector [n] ConnectedDevice PreferredFormat
Shows the preferred input format of the monitor connected to the HDMI port as defined in the monitors EDID. This is not necessarily the format the codec is sending out.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned: String
Example: xStatus Video Output Connector 1 ConnectedDevice PreferredFormat *s Video Output Connector 1 ConnectedDevice PreferredFormat: "1920x1080@60Hz" ** end
xStatus Video Output Connector [n] MonitorRole
Describes which video stream is shown on the device that is connected to the video output connector. First/Second/Third: The role of the monitor in a multimonitor setup. In a singlemonitor setup, there is no difference between First, Second and Third. PresentationOnly: Shows presentation video stream if active. Recorder: Shows all participants, including the local main video. If active, shows also the presentation.
Requires user role: ADMIN, USER
Value space of the result returned: First/Second/Third/PresentationOnly/Recorder
Example: xStatus Video Output Connector 1 MonitorRole *s Video Output Connector 1 MonitorRole: First ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

181

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xStatus Video Output Connector [n] Resolution Height
Shows the resolution height (in pixels) for the video output connector.
Requires user role: ADMIN, USER Value space of the result returned:
120..3000 Example:
xStatus Video Output Connector 1 Resolution Height *s Video Output Connector 1 Resolution Height: 1080 ** en
xStatus Video Output Connector [n] Resolution RefreshRate
Shows the resolution refresh rate (Hz) for the video output connector.
Requires user role: ADMIN, USER Value space of the result returned:
1..300 Example:
xStatus Video Output Connector 1 Resolution RefreshRate *s Video Output Connector 1 Resolution RefreshRate: 60 ** end
xStatus Video Output Connector [n] Resolution Width
Shows the resolution width (in pixels) for the video output connector.
Requires user role: ADMIN, USER Value space of the result returned:
176..4000 Example:
xStatus Video Output Connector 1 Resolution Width *s Video Output Connector 1 Resolution Width: 1920 ** end

xCommand

xStatus

API Reference Guide
Appendices

xStatus Video Output Connector [n] Type
Shows the type of connector. HDMI: It is an HDMI connector. DVI: It is an DVI connector.
Requires user role: ADMIN, USER Value space of the result returned:
HDMI/DVI Example:
xStatus Video Output Connector 1 Type *s Video Output Connector 1 Type: HDMI ** end
xStatus Video Presentation PIPPosition
Shows the position of the presentation image on the screen.
Requires user role: ADMIN, USER Value space of the result returned:
UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/LowerRight Example:
xStatus Video Presentation PIPPosition *s Video PIP Presentation Position: CenterLeft ** end
xStatus Video Selfview FullscreenMode
Shows whether selfview is set on full screen mode or not.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
On/Off Example:
xStatus Video Selfview FullscreenMode *s Video Selfview FullscreenMode: Off ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

182

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xStatus Video Selfview Mode
Shows whether selfview mode is set on or not.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
On/Off Example:
xStatus Video Selfview Mode *s Video Selfview Mode: Off ** end
xStatus Video Selfview OnMonitorRole
Identifies which monitor(s) contains the selfview, if present.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
First/Second/Third/Fourth Example:
xStatus Video Selfview OnMonitorRole *s Video Selfview OnMonitorRole: First ** end
xStatus Video Selfview PIPPosition
Shows the position of the selfview image on the screen.
Requires user role: ADMIN, INTEGRATOR, USER Value space of the result returned:
UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/LowerRight Example:
xStatus Video Selfview PIPPosition *s Video Selfview PIPPosition: LowerRight ** end

xCommand

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

183

xStatus

API Reference Guide
Appendices

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Chapter 6
Appendices

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

184

Cisco TelePresence SX20 Codec

Introduction

About the API

About startup scripts
You can add one or more startup scripts to the codec. A startup script contains commands (xCommand) and configurations (xConfiguration) that will be executed as part of the start up procedure every time the codec boots. A few commands and configurations cannot be placed in a startup script, e.g. xCommand SystemUnit Boot.
Use the codec's web interface to create and manage startup scripts.
Read more about the web interface and startup scripts in the Administrator guide for your product.

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

185

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

The SystemTools commands
NOTE: The systemtools commands are used for administrative control of the codec and is only available from a command line interface. Systemtools should not be used to program the codec.
Required parameters in angle brackets: <text>
Optional parameters in square brackets: [text]
To get an overview of the supported commands type "systemtools ?".
Example: systemtools ? boothalt camerarescue idefixversion touchpanelversion license network ntp pairing passwd pki rootsettings securitysettings securitystatus selectsw sudo whoami
To see the usage of the commands add a question mark after the command.
Example: systemtools network ? usage: network ping <hostname> | traceroute <hostname> | netstat | addrs | ifconfig

systemtools boothalt allow Allow the user to stop the system during the boot loader startup sequence using a serial console.
systemtools boothalt prevent Prevent the user from stopping the system during the boot loader startup sequence using a serial console.
systemtools boothalt status Show whether or not the system can be stopped during a boot loader startup sequence.
systemtools license list Lists all the licenses for the codec.
systemtools license show <name> Shows the content of a license file, define by the name.
<name>: The name of the license file.
systemtools network ping <hostname> Network debug command.
<hostname>: The IP address or URL of the host.
systemtools network traceroute <hostname> Network debug command.
<hostname>: The IP address or URL of the host.
systemtools network netstat Network debug command.
systemtools network addrs Check the systems IP address.

xStatus

API Reference Guide
Appendices

systemtools pairing unpair Remove association with Cisco TelePresence Touch controller.
systemtools passwd Change the password for the logged in user.
systemtools pki list Lists the codec certificate and CA list if they exist.
systemtools pki delete <cert-name> Delete the codec certificate and CA list if they exist.
<cert-name>: The name of the certificate.
systemtools securitysettings jitc Set up security requirements so they meet JITC. Set password and PIN polices enforced on the codec.
systemtools securitysettings isjitc Check if the current settings are JTIC compiant.
systemtools securitysettings default Revert to default security settings.
systemtools securitysettings ask Query for the separate configurations. When issuing this command you can see each policy separately. · Press enter to keep the current value. · Enter a number and press enter to change the given
policy. · The default value "0" indicates no restrictions.
Max failed login attempts [0]? · Number of failed logins until a user is set inactive.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

186

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

Suspend-time after max failed login attempts (minutes) [0]? · Number of minutes the user is set inactive after maximum
failed login attempts have been exceeded.
Max simultaneous sessions total [0]? · Maximum number of users that can be logged in simulta-
neous to web and maximum number of users that can be logged in simultaneous to ssh/Telnet.
Max simultaneous sessions per user [0]? · Maximum number of simultaneous sessions per user.
Number of passwords to remember [0]? · Number of previous passwords that the new password
must differ from.
Number of PINs to remember [0]? · Number of previous PINs that the new PIN must differ
from.
Maximum time between password renewals (days) [0]? · If the user has not changed the password within the
renewal time the user will be set inactive.
Minimum time between password renewals (hours) [0]? · The user can only change password once within this limit.
Maximum time between PIN renewals (days) [0]? · If the user has not changed the PIN within the renewal
time the user will be set inactive.
Minimum time between PIN renewals (hours) [0]? · The user can only change PIN once within this limit.
Maximum time between logins (days) [0]? · If the user has not logged in within this limit the user will
be set inactive.
Max consecutive equal digits in PINs [0]? · Maximum consecutive equal digits in PINs.
Minimum number of digits in PINs [0]? · Minimum number of digits in PINs.

Maximum number of digits in PINs [0]? · Maximum number of digits in PINs.
Max consecutive identical characters in passwords [0]? · Maximum consecutive identical characters in passwords.
Minimum number of characters in passwords [0]? · Minimum number of characters in passwords.
Maxmum number of characters in passwords [0]? · Maxmum number of characters in passwords.
Minimum number of lower-case letters in passwords [0]? · Minimum number of lower-case letters in passwords.
Minimum number of upper-case letters in passwords [0]? · Minimum number of upper-case letters in passwords.
Minimum number of numerical characters in passwords [0]? · Minimum number of numerical characters in passwords.
Minimum number of special characters in passwords [0]? · Minimum number of special characters in passwords.
Minimum number of character groups in passwords [0]? · Minimum number of character groups in passwords.
Minimum number of character changed from previous password [0]? · Minimum number of character changed from previous
password.
systemtools securitystatus Shows the security status for the codec.

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

187

xStatus

API Reference Guide
Appendices

Cisco TelePresence SX20 Codec

Introduction

About the API

About disconnect cause types
The following parameters are logged when a call is disconnected. The disconnect cause types are used in disconnect events (xEvent) and also logged in xHistory CallLogs.

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

CauseType
CauseString CauseCode CauseOrigin

Describes why the call was disconnected. The value space is { OtherLocal, LocalDisconnect, UnknownRemoteSite, LocalBusy, LocalReject, InsufficientSecurity, OtherRemote, RemoteDisconnect, RemoteBusy, RemoteRejected, RemoteNoAnswer, CallForwarded, NetworkRejected }
Describes the Cause Code.
The disconnect Cause Codes are defined in SIP and Q.850.
SIP, Q.850, internal.

Example 1:
xHistory CallLogs Call 694 ... *h xHistory CallLogs Call 694 DisconnectCause: "Normal" *h xHistory CallLogs Call 694 DisconnectCauseType: RemoteDisconnect *h xHistory CallLogs Call 694 DisconnectCauseCode: 16 *h xHistory CallLogs Call 694 DisconnectCauseOrigin: Q850 ... ** end

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

188

Cisco TelePresence SX20 Codec

Introduction

About the API

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

User documentation on the Cisco web site

User documentation for the Cisco TelePresence products is available at http://www.cisco.com/go/telepresence/docs Choose a product category in the right pane until you find the correct product. This is the path you have to follow:
TelePresence Integration Solutions > TelePresence SX Series
Alternatively, use the following short-link to find the documentation: http://www.cisco.com/go/sx-docs

The documents are organized in the following categories:
Install and Upgrade > Install and Upgrade Guides · Installation guides: How to install the product · Getting started guide: Initial configurations required to
get the system up and running · RCSI guide: Regulatory compliance and safety
information
Maintain and Operate > Maintain and Operate Guides · Getting started guide: Initial configurations required to
get the system up and running · Administrator guide: Information required to administer
your product · Administering CE Endpoints on CUCM: Tasks to
perform to start using the product with the Cisco Unified Communications Manager (CUCM)
Maintain and Operate > End-User Guides · User guides: How to use the product · Quick reference guides: How to use the product
Reference Guides | Command references · API reference guides: Reference guide for the
Application Programmer Interface (API)
Reference Guides > Technical References · CAD drawings: 2D CAD drawings with measurements

Design > Design Guides · Video conferencing room guidelines: General guide-
lines for room design and best practice · Video conferencing room guidelines: Things to do to
improve the perceived audio quality
Software Downloads, Release and General Information > Licensing Information · Open source documentation: Licenses and notices for
open source software used in this product
Software Downloads, Release and General Information > Release Notes · Software release notes

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

189

Cisco TelePresence SX20 Codec

Introduction

About the API

Intellectual property rights
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.
The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB's public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED "AS IS" WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
All printed copies and duplicate soft copies are considered un-Controlled copies and the original on-line version should be referred to for latest version.
Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the Cisco website at www.cisco.com/go/ offices.
TANDBERG is now a part of Cisco. TANDBERG® is a registered trademark belonging to Tandberg ASA.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)

D15316.06 SX20 Codec API Reference Guide CE9.0, APRIL 2017.

xConfiguration

xCommand

xStatus

API Reference Guide
Appendices

Cisco contacts On our web site you will find an overview of the worldwide Cisco contacts.
Go to: http://www.cisco.com/web/siteassets/contacts Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Dr. San Jose, CA 95134 USA

190