Your Safety is Paramount
This document provides essential safety and installation instructions for Whirlpool washers. It is crucial to read and understand these guidelines before operating the appliance to ensure safe and proper use. Always keep these instructions for future reference.
Key Safety Precautions
- Always follow the safety alert symbols and warnings (DANGER, WARNING) provided.
- Never wash articles contaminated with flammable or explosive substances like gasoline or dry-cleaning solvents.
- Ensure proper ventilation if hydrogen gas may have accumulated in the hot-water system.
- Supervise children closely when the appliance is in use.
- Before discarding the appliance, remove the door to prevent entrapment.
- Do not reach into the appliance while the tub or agitator is in motion.
- Avoid installing or storing the appliance in weather-exposed areas.
- Do not tamper with controls or attempt unauthorized servicing.
- Use only manufacturer-recommended replacement parts.
Installation Requirements
- Ensure the appliance is properly grounded according to local codes and ordinances.
- Use at least two people to move and install the washer to prevent injury.
- Connect water inlet hoses securely and do not overtighten.
- Ensure the drain hose is properly attached and inserted no more than 4.5 inches into the standpipe.
- Connect to a grounded 3-prong outlet with a 120V, 60Hz AC supply, protected by a 15A or 20A fuse. Do not use adapters or extension cords.
Maintenance and Care
- Replace inlet hoses every 5 years to prevent failure.
- Use High Efficiency (HE) detergents and follow manufacturer's dosage instructions.
- Periodically use warm or hot water wash settings.
- Leave the washer door/lid open between uses to allow drying and prevent odors.
- For front-load models, periodically clean the interior window and door seal.
Seasonal and Storage Care
- For non-use or vacation periods, unplug the appliance and turn off the water supply.
- For winter storage, winterize the washer by shutting off water, disconnecting hoses, draining them, and adding RV antifreeze to the basket before running a short cycle.
- When transporting the washer, follow winterization steps if freezing temperatures are expected, disconnect hoses, and secure the power cord.
Further Information
For detailed operating instructions and complete installation guidance, refer to the Quick Start Guide provided with the product or access online documentation.
