Instruction Manual for maxcare models including: Comfy Patch, Comfy, Patch, Comfy Patch

隨心貼說明書 Eng

Comfy Patch

8. DO NOT use when there is a tendency to hemorrhage following acute trauma or fracture. 9. DO NOT use on areas with severe varicose veins. 10. DO NOT use if there is suspected or diagnosed

Comfy Patch | Maxcare

maxcareonlineshop.com


File Info : application/pdf, 8 Pages, 191.75KB

PDF preview unavailable. Download the PDF instead.

隨心貼說明書 Eng
Comfy Patch
Instruction Manual
Please read this manual carefully before using Comfy Patch.

This is not a medical device. It is only intended for general physical conditioning. No medical claims are implied or guaranteed by the use of the product.
Caution 1. DO NOT use on face, head, throat, chest or genital
area. 2. DO NOT place on any wounds, swollen, infected or
inflamed areas. 3. DO NOT place on sensitive skin, or areas with skin
conditions or nerve damage. 4. DO NOT use during pregnancy, on the abdomen
during heavy menstrual flow, or immediately after childbirth. 5. DO NOT use after any recent surgical procedure, including Caesarian section. 6. DO NOT use while sleeping, driving or operating heavy machinery.
7. DO NOT use on children.

8. DO NOT use when there is a tendency to hemorrhage following acute trauma or fracture.
9. DO NOT use on areas with severe varicose veins.
10. DO NOT use if there is suspected or diagnosed epilepsy, heart condition or multiple sclerosis, or if there is a risk of embolism.
11. DO NOT use if carrying a pacemaker.

Product Specifications

Product Name Product Model Voltage Electric Current Rated Power Timer Mode Net Weight

: Comfy Patch : MAX-C01CS36 : 3.3V-5V : 0.08A : 0.4W : 30 min : 6 Modes; 8 Intensity Levels 92g

How to Operate
1. Connect the patches to the magnetic buckle conducting wire.
2. Peel the protective film off the patches, and then place them on desired area. Both patches must be contacting the skin.
3. Connect the power plug to a smartphone, charger, PC tablet or the USB port of Comfy Chair.
4. Press the "M" button to begin massage. The blue light will be on. Press and hold for 2 seconds to turn off. The blue light will be off.
5. 8 intensity levels available: press "+" to increase intensity; "-" to decrease.
6. 6 cyclical modes: tui na, knocking, kneading, gua sha, acupuncture and cupping therapy. Each mode lasts for 5 minutes, one after another. Automatically switched off after 30 minutes of use. Press "+" on button to restart.
7. Please be reminded to stick the protective film onto the patches after use.

Package includes: hComfy Patch Controller hCase hElectrode gel pads x2

hMagnetic buckle conducting wires
hnstruction manual

(reusable)

hPower Plug (Micro USBLightningType CUSB)

Main parts and Function: hPower Button hDecrease Button hIncrease Button hSignal Light hConnecting Buckle h Patch

hTui na hKnocking hKneading hGua sha hAcupuncture hCupping therapy

Note
hIf you use a smartphone to drive this product, For Android, please use a mobile phone or tablet with a Micro USB or Type C charger.
hFor Apple iPhone, please use Apple iPhone 6 or newer models, or iPad models with lightning charging.
hYou can only adjust the mode and intensity level when the device is on and when the patches are in contact with the skin.
hEach patch can be used for around 30 times. Do not place and remove from the skin if you do not intend to use it.
hIf the patches are not properly placed on skin, the skin being too oily or wet, or if the patches are too damaged to function, there could be mild discomfort.
hSince the Comfy Patch's electric current is between 1mA and 35mA, if the load detection value of the power bank is high and it cannot detect the conducting wire. And the power bank will turn off the output and enter sleep. Please make sure the power bank output is not less than 5V/0.1A and wire control can be used.

Problems and Solution

Problem

Possible Causes

Signal light hPower plug not connected

is off

hConducting wire not connected

Not working

hPatches not connected to skin hIntensity level set too low hPatches are damaged - inadequate
conductive gel hPatches not placed properly

Maintenance
hDo not store the device in humid or hot places.
hDo not immerse the device or connection wire in water.
hIf the patches are dirty or lose their viscosity, wipe them gently with a piece of damp cloth, or place them under running water. Do not use irritating soaps. Allow to dry thoroughly before use.

Solution hProperly connect the power plug to the USB port hProperly connect the conducting wire to parts
hPlace the patched properly hPress "+" on button to gradually enhance intensity hClean the patches and replace with new ones hTurn off the device, and relocate the patches to other areas
Recommended Usage hOnce or twice daily; each session should not exceed 30
minutes.
Maxcare Industrial Limited
Hong Kong - (852) 2950-9383 China - (86) 400 882-1883 www.maxcare.net / www.maxcareonlineshop.com



References

Adobe PDF library 16.07 Adobe Illustrator 26.5 (Windows)