BEAM 260 Moving Head Light

The BEAM 260 Moving Head Light is a professional lighting fixture combining advanced design with robust performance. It utilizes an aluminum alloy body and high-temperature durable engineering plastic for effective cooling. The transmission mechanism employs electronic positioning technology, and the product complies with CE standards using the international standard DMX512 control signal. It is suitable for television, disco, dance halls, nightclubs, and other indoor/outdoor performances.

Important Safety Information: This manual contains crucial information for safe installation and operation. Please read carefully and keep for future reference. Users must follow all stated warnings and instructions. Damage caused by misuse is not the responsibility of the manufacturer. Ensure the equipment is safely grounded.

The BEAM 250/260 weighs 13 kg and produces parallel beams similar to a laser, offering incredible output and pure white light. It features 13 different colors, 11 gobos, and can quickly change beam shapes, creating a spectacular half-empty effect. Its lightweight, low-power, fashionable design, powerful function, and high brightness make it easy to install in various settings like moving stages, TV activities, exhibition halls, or meeting rooms.

Technical Parameters:

• Lamp: GODN MSD 280R10
• Channel Mode: 18CH
• Level Scanning: 540° (16-bit precision scan) electronic error correction
• Vertical Scanning: 250° (16-bit precision scan) electronic error correction
• Color Wheel: 13 colors with white, with rotating rainbow effect
• Gobo Wheel: 11 gobos with rotating gradually change effect and pattern swing effect
• Shutter: Up to 13 times per second with automatic pulse effect
• Dimmer: 0%-100% linear dimmer
• Focus: 5 meters to infinity
• Prism: 24 prisms and 8 prisms (can be color prisms)
• Frost: 0%-100% linear frost
• Control Functions: Control table reset function and lamp control; Control table switch bubble function (bulb on/off selectable with power)
• Power Supply: AC110V-240V, 50/60HZ
• Light Body Size: 300x245x500mm

Signal Connection:

Lights and controllers must be connected using a two-core shielded wire with a diameter not less than 0.5 mm. Ensure XLR plugs and sockets do not contact the inner shell or other cores. For XLR-XLR control lines, connect the DMX outlet of the controller to the DMX input of the first machine, and subsequently connect the DMX outlet of each machine to the DMX input of the next. Complete the loop by connecting the last lamp's signal output. This ensures the controller mode connection is finished.

The control display board menu is designed for various moving lights with different control modes, offering easy operation. Some settings may be invalid for specific light types.

Menu Operation of Moving Head Light:

The control panel offers features like DMX address setting, bulb switch control, program running, and work mode selection.

DMX Address Setting:

Range: 001-512

Display Setting:

• Display Reverse: On/Off
• Language: English or Chinese
• Display Brightness: 000-007
• Backlit Delay: 1MIN, 5MIN, 8MIN, or Always On
• Menu Return: 1MIN, 5MIN, or 8MIN
• Backlight Flash: On/Off
• Menu Return: On/Off

Feature Settings:

• XY Setup: X reverse, Y reverse, XY speed, Y angle, XY optocoupler inspection, Menu return
• Shortest Path: On/Off
• Full Color: On/Off
• Channel Mode: Small, Standard, or Defined
• Receive Mode: DMX, Wire, or Auto
• Run Mode: Slave, Music, or Auto
• Signal Reset: On/Off
• DMX Reset: On/Off
• Menu Return: On/Off

Lamp Setting:

• Lamp Default: On/Off
• Manual Control: On/Off
• DMX Control Lamp: On/Off
• Lamp Working Time: Displays working hours
• Clearance Time: Displays clearance time
• Lamp Status: Displays lamp status
• Menu Return: On/Off

Information Inquiry:

• Working Hour: Displays hours
• Working Times: Displays number of cycles
• Fan1: Displays fan speed
• Fan2: Displays fan speed
• Software Version: Displays software version
• Remaining Time: Displays remaining time
• Remaining Number of Times: Displays remaining cycles
• Menu Return: On/Off

Control Channel:

Channel 01 - Channel 40

Assistant Tool:

• Factory Configuration
• Defaults Configuration
• Zero Adjustment
• Factory Set
• Inspection Code
• Menu Return

Reset:

• Cancel
• Execute
• Exit Menu

DMX Channel Breakdown:

Light Protection and Maintenance:

Replace lenses promptly if damaged. Replace bulbs if deformation or damage is observed, as aging bulbs pose a blowout risk. Check the power fuse if the light fails to start. Use a 5X20 T10A/250V fuse when replacing. The light has an overheating protection device that cuts off power when necessary. Check fan operation and clear any dirt or obstructions between the fan and fan grilles. Only qualified technical personnel should perform repairs.

Light Cleaning:

Regular cleaning is essential for reliable performance. Clean the fan every 15 days. Periodically clean the internal and external optical lenses, mirror, and coating color filter to optimize light output. Do not use chemical solvents on the color filter. Cleaning frequency depends on usage and environment. Use a soft cloth and general glass cleaning products. Clean the external optical system approximately every 20 days and the internal optical system at least every 30-60 days. Avoid using alcohol or organic solvents on the light's shell to prevent damage.