深圳市灰度科技有限公司深圳市灰度科技有限公司
User Manual for Huidu Technology models including: HD-C08L, HD-C16L, HD-C08L-HD-C16L LED Controller, HD-C08L-HD-C16L, LED Controller
Huidu Asynchronous LED Display Controller HD-C16L C08L LED Multimedia – LED Wall Parts Store Huidu HD-C16LHuidu HD-C16L LED Controller SpecificationHuidu HD-C16L LED Controller User ManualHuidu HD-C08LHuidu HD-C08L LED Controller Specification
Huidu Asynchronous LED Display Controller HD-C16L C08L LED Multimedia – LED Controller Store
Shenzhen Huidu Technology Co., Ltd.—HD-C16L/C08L
File Info : application/pdf, 35 Pages, 1.58MB
DocumentDocumentUser Manual Shenzhen Huidu Technology Company www.huidu.cn CONTENT Chapter 1 Interface connection....................................................................................................................... 1 1.1 HD-C08L Appearance and interface................................................................................................... 2 1.2 Hardware connection ........................................................................................................................ 5 Chapter 2 HDPlayer installation ...................................................................................................................... 6 Chapter 3 HD-C08L Parameter settings ........................................................................................................... 8 3.1 Connection ........................................................................................................................................ 8 3.2 Basic Setting ...................................................................................................................................... 8 3.3 More setting .................................................................................................................................... 12 3.3.1 Device information ............................................................................................................... 12 3.3.2 WiFi setting........................................................................................................................... 15 3.3.3 Volume setting ..................................................................................................................... 16 Shenzhen Huidu Technology Company www.huidu.cn 3.3.4 Brightness setting ................................................................................................................. 17 3.3.5 Time correction .................................................................................................................... 21 3.3.6 Relay setting ......................................................................................................................... 24 3.3.7 Network setting .................................................................................................................... 25 3.3.8 Device lock setting................................................................................................................ 27 Chaper 4 Async Program Editing and Publishing ........................................................................................... 28 4.1 Publish programs by HDPlayer ........................................................................................................ 28 4.2 Publish programs by U-disk(FAT or FAT 32)...................................................................................... 31 Shenzhen Huidu Technology Company www.huidu.cn Chapter 1 Interface connection Shenzhen Huidu Technology Company www.huidu.cn 1 1.1 HD-C08L Appearance and interface No. Name 1 Power Supply port 2 Ethernet network port 3 USB 4 Wi-Fi antenna 5 Wi-Fi indicator light 6 7 Shenzhen Huidu Technology Company Battery interface TEMP interface Function DC 5V 100M input network port communication, connect to computer to debug and publish programs, used to access LAN or Internet Used to update programs or expand capacity Connect Wi-Fi antenna to enhance wireless signal AP mode: The AP mode is normal and the green light flashes; The module cannot be detected and the light does not light up; Cannot connect to the hotspot and the red light flashes; STA mode: STA mode is normal and the green light is always on; The bridge cannot connect to the Wi-Fi hotspot and the red light is always on; Unable to connect to the server, the yellow light is always on. Connect the 2PIN RTC battery Connect a temperature sensor to monitor the surrounding www.huidu.cn 2 8 GPS interface 8-1 GPS indicator light 9 Sensor interface 9-1 Sensor indicator light 10 HUB75E interface Display indicator light 11 12 3 sets of CTRL 13 TRS Audio output 14 Relay 15 System indicator light Shenzhen Huidu Technology Company environment temperature in real time When detecting that there is no GPS signal, the light does not light up; When the GPS star search number < 4, the green light flashes; When the GPS star search number >= 4, the green light is always on. Connect to GPS module for positioning and time adjustment External temperature, humidity, brightness, wind speed, wind direction, noise, PM2.5, PM10, CO and other sensors The sensor is connected normally, and the indicator light is flashing Connect HUB75 (B/D/E) interface module If the green light flashes, the FPGA system is running normally; if the green light is on or off, the system is running abnormally. Switching quantity detection, detecting 12V level input, controlling on/off screen TRS 3.5mm standard two-channel audio output port Relay on/off, supports maximum load: AC 250V~3A or DC 30V-3A PWR: Power indicator light, green light is always on, power input is normal RUN: System running light. If the green light flashes, the system is running normally; if the green light is always on www.huidu.cn 3 or off, the system is running abnormally. 16 PCIE-4G socket 4G module socket (optional function, installed with 4G antenna by default) 16-1 SIM card holder Used to install 4G data card and provide networking function (optional, supports optional eSIM card) 16-2 4G antenna installation port External 4G antenna to enhance 4G signal The green light is always on, and the connection to the cloud server is successful; The yellow light is always on and cannot connect to the cloud service; 16-3 4G communication indicator light The red light is always on, there is no signal or the SIM is in arrears or cannot dial; The red light flashes and the SIM cannot be detected; The light does not light up and the module cannot be detected. Shenzhen Huidu Technology Company www.huidu.cn 4 1.2 Hardware connection Shenzhen Huidu Technology Company www.huidu.cn 5 Chapter 2 HDPlayer installation Please download the installation package of HDPlayer software from Huidu's official website www.huidu.cn, and complete the installation according to the diagrams below: 1.Run the software package,then select language for installer. Click [OK] to go on. Shenzhen Huidu Technology Company www.huidu.cn 6 2.After selecting a language, an installation wizard like below will appear. Click [Next]. Choose components, default installation. Choose the installation location, click [Browse] to change the default target location, then click [Install] after completing; After the installation is complete, you are ready to use HDPlayer. Shenzhen Huidu Technology Company www.huidu.cn 7 Chapter 3 HD-C08L Parameter settings 3.1 Connection Connect the C08L to the computer by net cable or WiFi(Default password:88888888). 3.2 Basic Setting 1.Run the HDPlayer software then it shows the C08L connected at the left-down corner. Shenzhen Huidu Technology Company www.huidu.cn 8 2.You need to create a new screen, then set the screen parameters. Click [OK] after you finish the setting. Shenzhen Huidu Technology Company www.huidu.cn 9 1.Untick 2.Select device 3ty.Epneter resolution 4.Set rotation Hardware parameter 5.Click [OK] Shenzhen Huidu Technology Company www.huidu.cn 10 3.After the previous steps, you can begin to edit the program. Shenzhen Huidu Technology Company www.huidu.cn 11 3.3 More setting 3.3.1 Device information You can view the running status of the device in the device information. Shenzhen Huidu Technology Company www.huidu.cn 12 Play mode: Support single program loop and order of play. Multi-screen Sync: Default setting is disable. If you want multiple screens to play synchronously, please enable. View the 3/4G network and sensor status. Key function: Screen testing or switch program Shenzhen Huidu Technology Company www.huidu.cn 13 Shenzhen Huidu Technology Company www.huidu.cn 14 3.3.2 WiFi setting Edit WiFi switch, mode, name and password, etc. Station mode enable C08L connect to the wireless network. Shenzhen Huidu Technology Company www.huidu.cn 15 3.3.3 Volume setting Fixed mode: set fixed volume According to the time period: Set the time frame. Shenzhen Huidu Technology Company www.huidu.cn 16 3.3.4 Brightness setting Default mode: Set fixed brightness Shenzhen Huidu Technology Company www.huidu.cn 17 Custom mode: Set the time frame for brightness Automatic mode: C08L automatically change Brightness according to the sensor. Sensitivity Indicates the frequency of detection.[High] means every 5 seconds;[in] mean 10;[low] mean 15. You'd better set Brightness monitoring interval to 3400-7000. Shenzhen Huidu Technology Company www.huidu.cn 18 Shenzhen Huidu Technology Company www.huidu.cn 19 Shenzhen Huidu Technology Company www.huidu.cn 20 3.3.5 Time correction Set the system time zone. C08L support summer time. Automatic synchronization: NTP mean time correct by network. Set GPS if installed the GPS module. Set RF if installed the RF device. Shenzhen Huidu Technology Company www.huidu.cn 21 Shenzhen Huidu Technology Company www.huidu.cn 22 3.3.6 Switch machines setting Set on/off time for C08L. Shenzhen Huidu Technology Company www.huidu.cn 23 3.3.6 Relay setting C08L supports relay installation. Shenzhen Huidu Technology Company www.huidu.cn 24 3.3.7 Network setting Default is automatic acquisition. You can set fixed IP for C08L. Shenzhen Huidu Technology Company www.huidu.cn 25 Shenzhen Huidu Technology Company www.huidu.cn 26 3.3.8 Device lock setting Set password to lock the device. After that People without passwords will not be able to make operational changes to the device. Shenzhen Huidu Technology Company www.huidu.cn 27 Chaper 4 Async Program Editing and Publishing 4.1 Publish programs by HDPlayer 1. Create new program Shenzhen Huidu Technology Company www.huidu.cn 28 2.Add content into Program Shenzhen Huidu Technology Company www.huidu.cn 29 3. Sending interface Shenzhen Huidu Technology Company www.huidu.cn 30 4.2 Publish programs by U-disk(FAT or FAT 32) 1. Export the program to the U-disk in HDPlayer Shenzhen Huidu Technology Company www.huidu.cn 31 2. Publish the video and picture in the U-disk Put the video and picture in the root catalog of U-disk Shenzhen Huidu Technology Company www.huidu.cn 32