CABLE Code: TV Code: 7. Repeat steps 1 through 6 for each device you want to control. PROGRAMMING. TV/VCR COMBO ...
Fold Fold Fold Fold Fold Fold Fold Moto DRC450_Mnl 10/2/02 12:04 PM Page 1 DRC450 UNIVERSAL REMOTE CONTROL Fold MADE IN INDONESIA USER GUIDE OVERVIEW The Motorola DRC450 universal remote will control up to four devices, including Motorola's interactive digital terminals*, most TVs,VCRs,Amplifiers, DVD players, PVRs, Tuners, and CD players. *NOTE: Digital models include the DCT1000, DCT1200, DCT1700, DCT2000, DCT2500, and DCT5100. The DRC450 can also control older Motorola analog models like the CT1900, CFT2100, CFT2200, and CFT3300. The DRC450 requires two new AA alkaline batteries (included) and has easy programming to control your Motorola interactive digital terminal, as well as all of the basic functions of your other original remote controls. Moreover, the DRC450 helps eliminate the need to use multiple remote controls. For best results, please read and perform all instructions listed herein.Also, keep these instructions for future reference. FEATURES AND FUNCTIONS Use the DRC450 mode keys (i.e., AUDIO, VCR/DVD, CABLE, or TV) to control a specific device.When pressed, the selected mode key will light, confirming your choice. Use the other keys to perform desired actions (see the following key chart). NOTE: The selected mode will remain active until you press another mode key. Press AUDIO, VCR/DVD, CABLE, or TV once to control a device. Press POWER once to turn on or off the selected home entertainment device. Press HELP once to display the help screen. Press MUTE once to turn sound off or on. Use PAGE L (or PAGE M) to page up (or down) through menu screens and the electronic program guide. Use LOCK** to restrict viewing of selected programs (Parental Control). Use EXIT to exit menu or guide. Use INFO to display current channel and program information. Use these keys to move the cursor in the electronic program guide and menu screens. Use OK**to chose menu options, PPV events, and to tune programs from the electronic program guide. Use GUIDE to display the electronic program guide. Use MENU to display the main menu. In TV or CABLE mode, use VOLUME + (or VOLUME -) to raise (or lower) sound volume. Use CHANNEL + (or CHANNEL -) to select the next higher (or lower) channel. Use LAST to recall last channel or go back one screen in the menu. In the CABLE mode, press FAVORITE once to display programmed favorite cable channels. These functions are set by your cable system operator. Use the keypad (0 ~ 9) to directly select the channels (e.g., 09 or 031). Press TV/VCR BYPASS once to switch VCR to view TV or tape (not supported by all applications). Use ENTER/MUSIC to display menu of digital music channels, or to enter channels on some TV models. In the VCR/DVD and TV modes, use the STOP, PAUSE, PLAY, REW., and F.FWD. keys to control a VCR (or DVD player). To record a program on a VCR, press RECORD once. In the CABLE mode, press DAY> (or <DAY) once to move the electronic program guide ahead (or back) 24 hours. **NOTE: Functionality of the LOCK and OK keys are dependent on the software and the model of Motorola interactive digital terminal. INSTALLING BATTERIES 1. On the DRC450's back, pull back the battery cover and remove it. 2. Use the two (2) supplied fullycharged AA alkaline batteries. Match their + and - marks to the + and - marks in the battery case, then insert the batteries. 3. Push the battery cover back into place. 4. Test the unit by pressing POWER and any mode key (e.g., AUDIO, VCR/DVD, CABLE, or TV). If the batteries are inserted correctly, the selected mode key will be lit. NOTE: When a selected mode key blinks two times with each key press, this indicates that the batteries are getting low. Replace them within 20 minutes; otherwise the DRC450 may lose its settings and require reprogramming. PROGRAMMING A SPECIFIC DEVICE CONTROL The DRC450 is preprogrammed at the factory to operate a RCA TV and VCR (or DVD player), a Motorola (General Instrument) interactive digital terminal, and a Pioneer audio device. To control devices other than the default brands, perform the following steps; otherwise skip this section: NOTE: For programming TV/VCR Combo control, see the next section. 1. Turn on a device (e.g.,VCR) and, if applicable, insert media, (e.g., cassette or disc). NOTE: Please read steps 2-4 completely before proceeding. Highlight or write down the codes and device you wish to program before moving on to step 2. 2. On the DRC450, press and hold a mode key (i.e., AUDIO, VCR/DVD, CABLE, or TV) for at least 6 seconds, until you see the programming mode start. Each mode key light will turn off and on sequentially, starting with AUDIO on through TV, and the sequence will repeat twice. At this time, release the mode key and wait until it's lit continuously. 3. Locate the code for your device in Manufacturer's Codes on the back of this user guide. Brands are listed in alphabetical order with the most popular codes listed first. 4. Enter the first four-digit code for your device. If you perform this procedure correctly, the selected mode key will blink three times. NOTE: If you enter an invalid code, the selected mode key will turn off. Repeat steps 2 through 4 with a valid code. 5. Aim the DRC450 at your device and press POWER once. The device should turn off. If it does not respond, repeat steps 2-4, trying each code listed for your brand until you find one that works. If it still does not work, try Searching For Your Code. NOTE: If the device does not have a POWER key, press the (Play) key. 6. For future reference, write your device code in the appropriate boxes below: AUDIO Code: Device Type:______________ VCR/DVD Code: Device Type:______________ CABLE Code: TV Code: 7. Repeat steps 1 through 6 for each device you want to control. PROGRAMMING TV/VCR COMBO CONTROL 1. Turn on the TV/VCR Combo and insert a video cassette. NOTE: Please read steps 2-4 completely before proceeding. Highlight or write down the codes and device you wish to program before moving on to step 2. 2. On the DRC450, press and hold a VCR/DVD for at least 6 seconds, until you see the programming mode start. Each mode key light will turn off and on sequentially, starting with AUDIO on through TV, and the sequence will repeat twice. At this time, release VCR/DVD and wait until it's lit continuously. 3. Locate the code for your device in Setup Codes For TV/VCR Combos on the back. Brands are listed in alphabetical order with the most popular codes listed first. 4. Enter the first four-digit code for your device. If you perform this procedure correctly, VCR/DVD will blink three times. NOTE: If you enter an invalid code, VCR/DVD will turn off. Repeat steps 2 through 4 with a valid code. 5. Aim the DRC450 at the TV/VCR combo and press POWER once. The device should turn off. If it does not respond, repeat steps 2-4, trying each code listed for your brand until you find one that works. If it still does not work, try Searching For Your Code. NOTE: If the device does not have a POWER key, press the (Play) key. NOTE: If you've located a TV/VCR code that works, but it has a separate TV code, you'll also need to program it into DRC450 to access volume control. Perform the steps in "Programming Device Control" and use TV for the mode key (e.g., press and hold TV). 6. For future reference, write your device codes in the boxes below: TV/VCR Combo Code: TV Code (if used): SEARCHING FOR YOUR CODE If your home entertainement device does not respond to the DRC450 after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, after trying all of the codes for your TV, you still cannot get the DRC450 to operate your TV, then: 1. Turn on your TV. 2. On the DRC450, press and hold TV (at least 6 seconds) until you see the programming mode start. Each of the mode key lights will turn off and on sequentially, starting with AUDIO on through TV, and the sequence will repeat twice. During this time, release TV and wait until it's lit continuously. 3. Press the (Up) cursor key once to start the search mode. NOTE: In the search mode, the DRC450 will send IR codes from its library to the selected component, starting with the most popular codes first. When the device responds to a subsequent key command (e.g., POWER), the correct device code will be found. 4. Press POWER once. The TV key will light on and off, showing that an IR code has been sent. 5. If your television does not turn off, press the (Up) cursor key once again to call up the next IR code and press POWER once again. 6. If your television still does not turn off, repeat step 5 as many times as needed until your TV turns off. 7. When your television does turn off, a working code has been found. Press OK once to save the code and the TV key will blink three times, confirming the selection. 8. To search for the codes of your other devices, repeat steps 1 through 7, but substitute the appropriate mode key (i.e., VCR/DVD, CABLE, or AUDIO) for the device you are searching for. CHECKING THE CODES If you have set up the DRC450 using the Searching For Your Code procedure, you may need to find out which four-digit code is operating your equipment. Perform the following procedure after you have set up your devices to find out which four-digit code is operating your equipment. For example, to find out which code is operating your TV: 1. Turn on your TV. 2. On the DRC450, press and hold TV (at least 6 seconds) until you see the mode light sequence start. Each of the mode key lights will turn off and on sequentially, starting with AUDIO on through TV, and will repeat twice. During the sequence, release the TV key and wait until it stays lit continually. 3. Press 9 - 9 - 0. The TV key will blink three times. 4. To view the code for the first digit, press and release 1. Count the number of TV key blinks (e.g., 3 blinks = 3) and write down the number in the leftmost TV code box in step 6 of Programming Device Control. NOTE: The mode key will not blink if the code digit is a "0". 5. Repeat step 4 three more times for each successive digit by pressing and releasing 2, 3, and then 4. Finish writing down the TV code in the remaining TV code boxes. 6. To check for the codes of your other devices, repeat steps 1 through 5, only substitute the appropriate mode key (i.e., VCR/DVD, CABLE, or AUDIO) for the device you are checking.Write down the codes in the appropriate device code boxes (see step 6 of Programming Device Control). CHANGING VOLUME LOCK Your new DRC450 is set to control the volume of a device through its associated mode (i.e., through the Motorola interactive digital terminal in the Cable mode, through the TV in the TV mode, through the VCR or DVD player in the VCR/DVD mode, and through the audio device in the Audio mode). If your TV is not remote controllable, or if you would like the volume to be controlled by a different device, you can change the Volume Lock setting to control a volume through a non-associated mode (e.g., through the Motorola interactive digital terminal in the TV mode). Changing the Volume Lock setting to the Cable,VCR/DVD, or TV mode will change the volume control for all modes except Audio, which will continue to control its own volume. If you change the Volume Lock setting to the Audio mode, all modes (i.e.,Audio., Cable, VCR/DVD, and TV) will be controlled by the Audio mode. To Change The Volume Lock Setting To Another Mode: 1. On the DRC450, press and hold a mode key (i.e., AUDIO, VCR/DVD, CABLE, or TV) for at least 6 seconds, until you see the programming mode start. Each mode key light will turn off and on sequentially, starting with AUDIO on through TV, and the sequence will repeat twice. At this time, release the mode key and wait until it's lit continuously. 2. Press and release VOLUME +. 3. The mode key's light will blink three times, indicating volume has been locked to the selected mode. 4. Now, whenever you press VOLUME +, VOLUME -, or MUTE on the DRC450, volume will be controlled by selected mode, independent of the current mode. To Unlock Volume Lock: 1. On the DRC450, press and hold a mode key (at least 6 seconds) until you see the programming mode start. Each mode key light will turn off and on sequentially, starting with AUDIO on through TV, and the sequence will repeat twice. During this time, release the mode key and wait until it's lit continuously. 2. Press and release VOLUME -. 3. The mode key light will blink three times, indicating volume has been unlocked for the selected mode. 4. Now, whenever you press VOLUME +, VOLUME -, or MUTE on the DRC450, the volume controls will reset to their original device. Fold TROUBLESHOOTING PROBLEM: A mode key does not blink or blinks 2 times when you press a key. SOLUTION: Replace the batteries with two (2) new AA alkaline batteries. PROBLEM: A mode key blinks when you press a key, but home entertainment component does not respond. SOLUTION: Make sure the DRC450 is aimed at your home entertainment device and is not farther than 15 feet away. continued on back... Fold Fold Fold Fold Fold Fold Fold Fold Fold Fold Fold Fold Fold Fold Moto DRC450_Mnl 10/2/02 12:04 PM Page 2 Fold TROUBLESHOOTING (continued) PROBLEM: DRC450 does not control home entertainment devices or commands are not working properly. SOLUTION: Try all listed codes for the device brands being set up. Make sure they can be operated with an infrared remote control. PROBLEM: TV/VCR combo does not respond properly. SOLUTION: Use the VCR codes for your brand. Some combo units may require both a TV code and a VCR code for full operation. PROBLEM: CHANNEL+ , CHANNEL- , and LAST do not work for your RCA TV. SOLUTION: Due to RCA design (19831987), only the original remote control will operate these functions. PROBLEM: Changing channels does not work properly. SOLUTION: If original remote control required pressing Enter to change channels, press ENTER on the DRC450 after entering the channel number. MANUFACTURER'S CODES Setup Codes For Audio Amplifiers Aiwa Carver Curtis Mathes Denon GE Harman/Kardon JVC Left Coast Linn Magnavox Marantz Nakamichi Optimus Panasonic Philips Pioneer Polk Audio RCA Realistic Sansui Sony Soundesign Technics Victor Wards Yamaha 0406 0269 0300 0160 0078 0892 0331 0892 0269 0269 0892, 0321, 0269 0321 0395, 0300 0308 0892, 0269 0013, 0300 0892, 0269 0300 0395 0321 0689, 0220 0078 0308 0331 0078, 0013 0354 Setup Codes For Audio Receivers ADC Aiwa Audiotronic Bose Capetronic 0531 1089, 1405, 0121, 0158, 0189, 0405 1189 1229 0531 Carver Casio Clarinette Curtis Mathes Denon Emerson Fisher Garrard Harman/Kardon Hewlett Packard JBL JVC Kenwood Koss LXI Linn Lloyd's MCS Magnavox Marantz Modulaire Motorola Musicmagic Nakamichi Onkyo Optimus Panasonic Penney Philips Pioneer Polk Audio Proscan Quasar RCA Realistic Sansui Sanyo Sharp Sherwood Sony Soundesign Stereophonics Sunfire Teac Technics Thorens Victor Wards Yamaha Yorx Zenith 1089, 1189, 0042, 0189, 0360 0195 0195 0080 1104, 1160, 0004 0424 0042, 0360 0424, 0463 0110, 0189, 0891 1181 0110 0074 1313, 1027, 1570, 1569, 0027, 0042, 0186 0424 0181 0189 0195 0039 1089, 1189, 0189, 0195, 0391, 0531 1089, 1189, 0039, 0189 0195 1191 1089 0097 0135 1023, 0042, 0080, 0181, 0186, 0531, 0670, 0738, 0801 1518, 0039, 0309, 0367 0195 1089, 1189, 1269, 0189, 0391, 1120 1023, 0014, 0080, 0150, 0244, 0531, 0630 0189 1254 0039 1023, 1254, 0080, 0360, 0531 0181, 0195 1089, 0189 0801 0186 0491, 0502 1058, 1258, 1158, 0158, 0474 0670 1023 1313 0463 1308, 1309, 1518, 0039, 0309 1189 0074 0014, 0080, 0158, 0189 0176, 0186, 1176 0195 0857 Setup Codes For Cable Converters (Interactive Digital Terminals) Director General Instrument Jerrold Motorola Supercable 0476 0476 0476, 0276 0476, 0276 0276 Setup Codes For CD Players Aiwa 0157, 0124 Burmester 0420 California Audio Labs 0029, 0303 Carver 0157, 0179, 0437 DKK 0000 DMX Electronics 0157 Denon 0873, 0003 Emerson 0305 Fisher 0174, 0179 Garrard 0393, 0420 Genexxa 0032, 0305 Harman/Kardon 0157, 0173 Hitachi 0032 JVC 0072 Kenwood 0681, 0826, 0626, 0028, 0037, 0190 Krell 0157 LXI 0305 Linn 0157 MCS MTC Magnavox Marantz Miro Mission NSM Nikko Onkyo Optimus Panasonic Parasound Philips Pioneer Polk Audio Proton QED Quasar RCA Realistic Rotel SAE Sansui Sanyo Scott Sears Sharp Sherwood Sonic Frontiers Sony Soundesign Tascam Teac Technics Victor Wards Yamaha Yorx 0029 0420 0157, 0305 0626, 0029, 0157, 0180 0000 0157 0157 0174 0868, 0101 1063, 0000, 0032, 0037, 0145, 0179, 0305, 0420, 0437, 0468 0029, 0303 0420 0626, 0157 1063, 1062, 0032, 0305, 0468 0157 0157 0157 0029 1062, 0032, 0053, 0179, 0305, 0468, 0764 0179, 0180, 0420 0157, 0420 0157 0157, 0305 0179 0305 0305 0861, 0037, 0180 1067, 0180 0157 0490, 0000, 0185 0145 0420 0174, 0180, 0393, 0420 0029, 0303 0072 0157, 0053 0888, 0036, 0187 0461 Setup Codes For DVD Players Aiwa Apex Blue Parade Denon Emerson Enterprise Fisher GE Go Video Gradiente Greenhill Harman/Kardon Hitachi Hiteker JVC Kenwood Konka Magnavox Marantz Microsoft Mitsubishi NAD Onkyo Oritron Panasonic Philips Pioneer Princeton Proscan RCA Samsung Sanyo Sharp Sherwood Sony Technics Techwood Theta Digital Toshiba Urban Concepts Yamaha Zenith 0641 0672, 0755 0571 0490, 0634 0591 0591 0670 0522, 0717 0715 0651 0717 0582 0573, 0664 0672 0558, 0623 0534, 0682 0711, 0719, 0720, 0721 0503, 0675 0539 0522 0521 0704 0503, 0627 0651 0490, 0632, 0677 0503, 0539 0525, 0571, 0632 0674 0522 0522, 0571, 0717 0573 0670 0630 0633 0533 0490 0692 0571 0503 0503 0490, 0545 0503, 0591 Setup Codes For TVs A-Mark AOC Abex Admiral Adventura Aiko Aiwa Akai Alaron Ambassador America Action Ampro Anam Anam National Archer Audiovox Baysonic Belcor Bell & Howell Bradford Brockwood Broksonic CCE CXC Candle Carnivale Carver Celebrity Cineral Citizen Clairtone Concerto Contec Craig Crosley Crown Curtis Mathes Daewoo Daytron Denon Dumont Dwin Electroband Electrohome Emerson Envision Fisher Fujitsu Funai Futuretech GE Gibralter GoldStar Gradiente Grunpy Hallmark Harley Davidson Harman/Kardon Harvard Havermy Hitachi Infinity Inteq JBL JCB JVC Janeil KEC KTV Kaypani Kenwood Kloss Konka LG LXI Logik Luxman MEI 0003 0030, 0019, 0003, 0052, 0185 0032 0093, 0463 0046 0092 0701 0030 0179 0177 0180 0751 0180 0055 0003 0451, 0180, 0003, 0092, 0623 0180 0019 0154, 0016 0180 0019 0236, 0463, 0003 0217 0180 0030, 0056, 0046, 0186 0030 0054 0000 0451, 0092 0060, 0030, 0056, 0039, 0046, 0092, 0186, 0280 0185 0056 0180, 0157, 0185 0180 0054 0180, 0039 0047, 0054, 0154, 0051, 0451, 0093, 0060, 0030, 0145, 0056, 0016, 0039, 0166, 0466, 0747, 1147, 1347 0451, 0019, 0039, 0092, 0623, 0624 0019 0145 0017, 0019 0720, 0774 0000, 0185 0381 0154, 0236, 0463, 0180, 0282, 0178, 0019, 0179, 0039, 0038, 0177, 0185, 0280, 0623, 0624 0030 0154, 0159 0179, 0683 0180, 0179, 0171 0180 0047, 0051, 0451, 0093, 0282, 0178, 0021, 0055, 0027, 0135, 0747, 1147, 1347 0017, 0030, 0019 0030, 0178, 0019, 0056, 0001, 0032 0053, 0056 0180, 0179 0178 0179 0054 0180 0093 0145, 0056, 0016, 0032, 0038, 0151 0054 0017 0054 0000 0053 0046 0180 0180, 0030, 0039, 0185, 0217, 0280 0052 0030, 0019 0024, 0046 0628, 0632, 0638, 0703, 0707 0056 0047, 0054, 0154, 0156, 0178, 0747 0016 0056 0185 MGA MTC Magnavox Majestic Marantz Matsushita Megatron Memorex Midland Minutz Mitsubishi Motorola Multitech NAD NEC NTC Nikko Noshi Onwa Optimus Optonica Orion Panasonic Penney Philco Philips Pilot Pioneer Portland Princeton Prism Proscan Proton Pulsar Quasar RCA RadioShack Realistic Rhapsody Runco SSS Sampo Samsung Samsux Sansei Sansui Sanyo Scimitsu Scotch Scott Sears Semivox Semp Sharp Shogun Signature Simpson Sony Soundesign Spectricon Squareview Starlite Supre-Macy Supreme Sylvania Symphonic TMK TNCi Tandy Tatung Technics Technol Ace Techwood Teknika Telefunken Toshiba 0150, 0030, 0178, 0019 0060, 0030, 0019, 0056, 0185 0054, 0030, 0179, 0020, 0024, 0096, 0186, 0187, 0386, 1254 0016 0054, 0030 0250 0178, 0145, 0003 0154, 0250, 0463, 0150, 0178, 0179, 0056, 0016 0047, 0017, 0051, 0039, 0032, 0135, 0747 0021 0093, 0150, 0178, 0019 0093, 0055 0180, 0217 0156, 0178, 0166 0030, 0019, 0056, 0497 0092 0030, 0178, 0092 0018 0180 0154, 0250, 0166 0093, 0165 0236, 0463, 0179 0250, 0051, 0055 0047, 0156, 0051, 0060, 0030, 0178, 0021, 0019, 0018, 0056, 0039, 0003, 0027, 0032, 0135, 0747, 1347 0054, 0463, 0030, 0145, 0019, 0020, 0096 0054 0030, 0019, 0039 0038, 0166, 0679 0019, 0039, 0092 0717 0051 0047, 0747 0178, 0003, 0052, 0466 0017, 0019 0250, 0051, 0165, 0055 0047, 0051, 0093, 0019, 0018, 0038, 0090, 0135, 0679, 0747, 1047, 1147, 1247, 1347, 1447 0047, 0154, 0165, 0180, 0030, 0178, 0019, 0056, 0039, 0032, 0747 0154, 0165, 0180, 0030, 0178, 0019, 0056, 0039, 0032 0185 0017, 0030, 0497, 0603 0180, 0019 0030, 0039, 0032, 0052 0060, 0030, 0178, 0019, 0056, 0032 0039 0451 0463 0154, 0146, 0159 0019 0178 0236, 0180, 0178, 0019, 0179 0047, 0054, 0154, 0156, 0178, 0179, 0056, 0146, 0159, 0171, 0747 0180 0156 0093, 0165, 0039, 0157, 0386, 0688 0019 0016 0186, 0187 0000, 0080, 0111 0180, 0178, 0179, 0186 0003 0171 0180 0046 0000 0054, 0030, 0020, 0096, 0381 0180, 0171 0178, 0056, 0177 0017 0093 0055, 0003 0250, 0051 0179 0051, 0056, 0003 0054, 0180, 0150, 0060, 0019, 0179, 0056, 0016, 0039, 0092, 0186 0056 0154, 0156, 0060, 1256 Tosonic Totevision Trical Universal Vector Research Victor Vidikron Vidtech Viking Wards Waycon White Westinghouse Yamaha Zenith Zonda 0185 0039 0157 0027 0030 0053 0054 0178, 0019 0046 0054, 0165, 0030, 0178, 0021, 0019, 0179, 0056, 0016, 0020, 0027, 0080, 0096, 0111 0156 0463, 0623, 0624 0030, 0019 0017, 0463, 0016, 0092, 0624 0003 Setup Codes for TV/VCR Combos: Broksonic Citizen Colt Curtis Mathes Daewoo Emerson Funai GE GoldStar Harley Davidson Hitachi JVC Lloyd's Magnasonic Magnavox Magnin Memorex MGA Mitsubishi Optimus Orion Panasonic Penney Quasar RadioShack RCA Sansui Sanyo Sears Sharp Sony Sylvania Symphonic Thomas White Westinghouse Zenith 0002, 0479 (for TV use 0463) 0278 0072 0035 (for TV use 0051) 0278 (for TV use 0624) 0002, 0278 (for TV use 0624), 0479 (for TV use 0463) 0000 0035 (for TV use 0051), 0240, 0048 (for TV use 0093), 0060 (for TV use 0047) 0037 (for TV use 0056) 0000 0000 0067 0000 0278 0000, 0081 (for TV use 0054) 0240 0037, 0162 (for TV use 0250), 0454, 1037, 1162, 1262 0240 0048 (for TV use 0093) 0162 (for TV use 0250), 0454, 1162, 1262 0002, 0479 (for TV use 0463) 0035 (for TV use 0051), 0162 (for TV use 0250), 1162, 1262, 1362 0035 (for TV use 0051), 0037 (for TV use 0056), 0240 0035 (for TV use 0051), 0162 (for TV use 0250) 1037 0035 (for TV use 0051), 0048 (for TV use 0093), 0060 (for TV use 0047), 0240 0000, 0479 (for TV use 0463) 0240 0000, 0037 (for TV use 0056) 0048 (for TV use 0093) 0000, 0032 (for TV use 0000) 0081 (for TV use 0054) 0000 0000 0278 (for TV use 0624) 0000, 0479 (for TV use 0463) Setup Codes For VCRs (and PVRs) Admiral Adventura Aiko Aiwa Akai America Action American High Asha Audiovox Beaumark Bell & Howell Broksonic CCE Calix Canon Carver 0048, 0209 0000 0278 0037, 0000 0041 0278 0035 0240 0037 0240 0104 0184, 0121, 0209, 0002, 0479 0072, 0278 0037 0035 0081 Cineral 0278 Citizen 0037, 0278 Colt 0072 Craig 0037, 0047, 0240, 0072 Curtis Mathes 0060, 0035, 0162, 0041, 0760 Cybernex 0240 Daewoo 0045, 0278 Denon 0042 Dynatech 0000 Electrohome 0037 Electrophonic 0037 Emerex 0032 Emerson 0037, 0184, 0000, 0121, 0043, 0209, 0002, 0278, 0479 Fisher 0047, 0104 Fuji 0035, 0033 Funai 0000 GE 0060, 0035, 0048, 0240, 0760 Garrard 0000 Go Video 0432 GoldStar 0037, 0038 Gradiente 0000 HI-Q 0047 Harley Davidson 0000 Harman/Kardon 0081, 0038 Harwood 0072 Hitachi 0000, 0042, 0041 Hughes Network Sys. 0042 JVC 0067, 0041 Jensen 0041 KEC 0037, 0278 KLH 0072 Kenwood 0067, 0041, 0038 Kodak 0035, 0037 LXI 0037 Lloyd's 0000 Logik 0072 MEI 0035 MGA 0240, 0043 MGN Technology 0240 MTC 0240, 0000 Magnasonic 0278 Magnavox 0035, 0039, 0081, 0000, 0149, 0563 Magnin 0240 Marantz 0035, 0081 Marta 0037 Matsushita 0035, 0162, 0454 Memorex 0035, 0162, 0037, 0048, 0039, 0047, 0240, 0000, 0104, 0209, 0454, 0479, 1037, 1162, 1262 Minolta 0042 Mitsubishi 0048, 0067, 0043 Motorola 0035, 0048 Multitech 0000, 0072 NEC 0104, 0067, 0041, 0038 Nikko 0037 Noblex 0240 Olympus 0035 Optimus 1062, 0162, 0037, 0048, 0104, 0432, 0454, 1048, 1162, 1262 Orion 0184, 0209, 0002, 0479 Panasonic 1062, 0035, 0162, 0225, 0454, 0616, 1162, 1262, 1362 Penney 0035, 0037, 0240, 0042, 0038 Pentax 0042 Philco 0035, 0209, 0479 Philips 0035, 0081, 0618, 1081, 1181 Pilot 0037 Pioneer 0067 Polk Audio 0081 Profitronic 0240 Proscan 0060, 0760 Protec 0072 Pulsar 0039 Quasar 0035, 0162, 0454, 1162 RCA 0060, 0035, 0048, 0240, 0042, 0149, 0760 RadioShack 0000, 1037 Radix 0037 Randex 0037 Realistic 0035, 0037, 0048, 0047, 0000, 0104 ReplayTV 0614, 0616 Runco 0039 STS 0042 Samsung 0240, 0045 Sanky 0048, 0039 Sansui 0000, 0067, 0209, 0041, 0479 Sanyo Scott Sears Semp Sharp Shintom Shogun Singer Sony Sylvania Symphonic TMK Tatung Teac Technics Teknika Thomas Tivo Toshiba Totevision Unitech Vector Vector Research Video Concepts Videomagic Videosonic Villain Wards White Westinghouse XR-1000 Yamaha Zenith 0047, 0240, 0104 0184, 0045, 0121, 0043 0035, 0037, 0047, 0000, 0042, 0104 0045 0048 0072 0240 0072 0035, 0032, 0000, 0033, 0636, 1032 0035, 0081, 0000, 0043 0000 0240 0041 0000, 0041 0035, 0162 0035, 0037, 0000 0000 0618, 0636 0045, 0043 0037, 0240 0240 0045 0038 0045 0037 0240 0000 0060, 0035, 0048, 0047, 0081, 0240, 0000, 0042, 0072, 0149, 0760 0209, 0072, 0278 0035, 0000, 0072 0038 0039, 0000, 0209, 0033, 0479 ADDITIONAL INFORMATION The Motorola DRC450 does not have any user serviceable parts. Opening the case, except for the battery cover, may cause permanent damage to your Motorola remote control. No part of this publication may be reproduced, transmitted, transcribed, stored in any retrieval system, or translated to any language, in any form or by any means, electronic, mechanical, magnetic, optical, manual, or otherwise, without the prior written permission of Motorola. MOTOROLA and the stylized M logo are registered trademarks in the US Patent and Trademark Office.All other product or service names are the property of their respective owners. Copyright Motorola, Inc., 2002. M496116-001 8/02 Fold Fold Fold Fold Fold Fold Fold FoldAcrobat Distiller 4.0 for Macintosh