Dynavin N7-MST2010 PRO/Navos Audio Troubleshooting and Vehicle Wiring Configurations

Unit Connection Guide

Ensure the red circled 4-pin plug on the back of the Dynavin unit (pictured left) is connected and plugged in the correct direction to the 4-pin plug on the main harness labeled "9000". The accompanying image illustrates the proper orientation for connecting these plugs to each other.

Image Description: The top left image shows the rear of the Dynavin N7-MST2010 PRO unit. A red circle highlights a 4-pin plug. The top right image provides a close-up view of hands connecting two 4-pin plugs, demonstrating the correct alignment for a secure connection.

Factory Shaker Audio Wiring

This harness connection is necessary only if your subwoofers are not functioning. Note that your "subwoofer in" RCA connector may be green.

Image Description: This image displays the wire harness specifically for connecting factory Shaker Audio systems to the Dynavin/Navos unit. It shows various wires and RCA connectors. A yellow circle highlights an RCA connector, which is noted as potentially being green and labeled for "subwoofer in".

Factory Base Audio Wiring

Image Description: This image illustrates the wire harness for connecting factory Base Audio systems to the Dynavin/Navos unit. It features RCA connectors and presents a different harness configuration compared to the Shaker Audio setup.

Vehicle Wiring Configurations by Factory Audio Options

Without Shaker Audio (Not Amplified)

Image Description: This diagram outlines the wiring configuration for vehicles equipped without Shaker Audio, meaning the system is not amplified. Key connectors are labeled: "Main Harness", "AMP/SWC Required Plug", "Not Used", and "Connect to Factory Wiring Harness".

With Shaker Audio (Amplified)

Image Description: This diagram details the wiring configuration for vehicles that include Shaker Audio, indicating an amplified system. Labeled connectors include: "Main Harness", "AMP/SWC Required Plug", "Amplifier Output Harness", "Shaker Amplifier Integration Harness", and "Connect to Factory".

Troubleshooting and Amplifier Retention Harness Usage

Vehicles equipped with factory amplifiers might require the use of the provided amplifier retention harness. This harness facilitates a lower-level output from the Dynavin/Navos unit, designed to match the factory amplifier's input. It's important to note that not all vehicles will need this harness; determining its necessity may involve some trial and error to find the optimal setup for your specific car.

Audio Output Level Adjustments:

If the speaker output level is excessively high, utilize the amplifier retention harness.
If you encounter low-level static noise, the amplifier retention harness should be used.
If the audio output is very low, remove the amplifier retention harness and connect the main harness directly to the back of the unit.
For issues with bass or subwoofer functionality (not hearing bass/subs), connect the included green "Subwoofer Out" RCA cable to the red (or green) "Subwoofer In" RCA port on the main harness (this port is circled in yellow in the Shaker Audio diagram).

Additionally, the Dynavin unit features a "Factory Amplifier" setting within the "Audio" menu. This setting can be enabled and adjusted to precisely fine-tune the output level of the head unit for any given installation.

	Dynavin D8-MST2010 Connections Guide A comprehensive guide to connecting the Dynavin D8-MST2010 car audio system, detailing all ports and included parts for installation.
	Dynavin N7 Pro Owner's Manual - Features, Installation, and Operation Guide Comprehensive owner's manual for the Dynavin N7 Pro automotive multimedia system. Covers installation, system settings, radio, media playback, Bluetooth, iPod, USB, navigation, audio, and troubleshooting.
	Dynavin MST2010 Quick Manual and Wiring Diagram A quick manual and wiring diagram for the Dynavin MST2010, including installation guidance and support information.
	Dynavin 8 Quick Manual: Audi Multimedia System Operation Guide Concise guide to operating the Dynavin 8 multimedia system for Audi Concert and Symphony radios, covering features like CarPlay, Android Auto, sound integration, and system controls.
	Dynavin D8-MST2015L/H: Connections and Included Parts Guide Detailed guide to the connections and included parts for the Dynavin D8-MST2015L/H car infotainment system, covering SiriusXM, Bluetooth, WiFi, GPS, cameras, and audio integration.
	Dynavin Quick Manual for Ford Focus 2010-2014 Concise guide for Dynavin car audio systems, featuring a wiring diagram for Ford Focus 2010-2014, installation video links, navigation map management, system reboot instructions, and support resources.
	Dynavin MST2005 Quick Manual and Wiring Diagram A concise guide to installing and operating the Dynavin MST2005, including a detailed wiring diagram and support information.
	Dynavin N7 Pro Series Navi-Systeme: Technical Specifications and Vehicle Compatibility Explore the Dynavin N7 Pro series of 10", 9", 7", and 6.2" car navigation systems. This document details technical specifications, features, and compatibility with over 100 vehicle types from manufacturers like Audi, BMW, Ford, VW, Mercedes, and more.