JBL TUNER FM

1. What's in the Box

• JBL Tuner FM unit (x1)
• USB cable (x1)
• USB power adapter (x1)

2. Connections

Connect the included USB cable to the JBL Tuner FM and the USB power adapter for charging. You can also connect an external audio source (e.g., smartphone, computer) via a cable to the Tuner FM for audio playback.

3. Buttons

4. Language Setting

To set the language:

1. Press the power button to turn on the radio speaker.
2. On first use or after a factory reset, press the Tune+ or Tune- buttons to cycle through available languages. Press the SCAN button to confirm your selection.

Factory Reset: Press and hold the Bluetooth and Volume+ buttons simultaneously for more than 5 seconds.

5. Tune in to FM Radio Station

1. Press the FM button.
2. Use the Tune up or Tune down buttons to select a radio station.

6. Preset and Listen to Station

1. Select one of your favorite FM radio stations.
2. Press and hold a preset button (1, 2, 3, 4, or 5) for more than 2 seconds until the screen indicates the station is saved.
3. Press the desired preset button (1, 2, 3, 4, or 5) directly to play the saved station.

You can save a maximum of 5 preset radio stations.

7. Auto Scan Radio

Press the SCAN button to start scanning automatically. In FM mode, the JBL Tuner FM will search for and tune into available radio stations.

8. Bluetooth® Connectivity

1. Press the Bluetooth button to enter pairing mode.
2. On your Bluetooth device, search for and select "JBL Tuner FM" to connect.

9. Warnings and Precautions

• Do not excessively stretch or bend the antenna, as this can cause damage and affect signal reception. Avoid risky operations.
• If the speaker will not be used for an extended period, recharge the battery at least once every 3 months. Battery life may vary based on usage patterns and environmental conditions.
• It is recommended to use the bundled JBL USB adapter. Using other USB adapters may lead to reduced radio performance.

Specifications

• Transducer: 1 x 44.5mm
• Frequency response: 85Hz – 20kHz
• FM Tuning range: 76 MHz – 108 MHz (country dependent)
• Bluetooth version: 4.1
• Support: A2DP V1.2, AVRCP V1.5
• Rated power: 5WRMS
• Signal-to-noise ratio: >80dB
• Battery type: Lithium-ion polymer (3.7V/1500mAh)
• Battery charge time: 3.5 hours
• Music playtime: Up to 8 hours (varies by volume level and audio content)
• Bluetooth transmitter power: 0-9 dBm (EIRP)
• Bluetooth transmitter frequency range: 2.402-2.480GHz
• Bluetooth transmitter modulation: GFSK / π/4 DQPSK / 8DPSK
• Dimensions: 165 mm x 66mm x 66mm
• Weight: 450g

Legal and Compliance Information

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

This equipment operates on a secondary basis, meaning it is not protected against harmful interference, even from similar devices, and cannot cause interference to primary systems. This product is certified by ANATEL according to regulated procedures and meets technical requirements. For more information, consult the ANATEL website.

CE marking indicates compliance with relevant EU directives.