Philips Hue Discover & Welcome Outdoor Lighting
User Manual & Installation Guide
Product Overview
This document provides instructions for installing and using the Philips Hue Discover and Welcome outdoor lighting fixtures. These fixtures offer smart, wireless lighting solutions for your home.
The product is certified for use with Zigbee technology, enabling seamless integration with the Philips Hue ecosystem.
Included in the Box
- Philips Hue Outdoor Light Fixture (Model dependent: Welcome or Discover)
- Mounting hardware (screws, anchors)
- User Manual / Quick Start Guide
Diagram Description: The 'Included' section shows two boxes labeled 'A' and 'B', each containing a manual icon, suggesting different versions or components of the manual are included.
Tools and Materials Not Included (Excl.)
- Power Drill
- Screwdrivers (Phillips and Flathead)
- Allen Key
- Utility Knife
- Pencil
Diagram Description: The 'Excluded' section displays icons representing a power drill, various screwdrivers (Phillips and Flathead), an Allen key, a utility knife, and a pencil.
Safety and Installation Precautions
- ⚠️ WARNING: Ensure the power supply is switched OFF at the circuit breaker before beginning installation.
- ℹ️ NOTE: This fixture has an IP44 rating, making it suitable for outdoor use against splashing water.
- ℹ️ NOTE: Proper grounding (?) is essential for safe operation.
- ℹ️ NOTE: Wire connections should be made securely. Recommended wire stripping length is 8mm.
- Electrical installation should be performed by a qualified electrician if you are not experienced.
- Avoid installing near water sources or in areas prone to flooding.
Diagram Description: Icons illustrate: a crossed-out speaker (do not install near sound sources), IP44 rating, grounding symbol, wire gauge (3/8" or 8mm), a crossed-out electrical plug, a question mark for general caution, and symbols indicating correct wire stripping and connection.
Installation Steps
Step 1: Mounting Preparation
Attach the mounting bracket to the desired surface (e.g., wall). Use the provided screws and anchors suitable for your wall material. Ensure the bracket is firmly secured.
Diagram Description: Shows the mounting bracket being positioned and secured with screws. Text indicates materials like 'Inox', 'Stainless Steel', 'Edelstahl' (stainless steel in various languages).
Step 2: Attaching the Fixture
Align the main light fixture with the mounting bracket and connect them. Rotate the fixture until it securely locks into place, often with an audible click.
Diagram Description: Illustrates the light fixture being attached to the already mounted bracket, with a rotational movement indicated.
Step 3: Cable Entry Sealing
Ensure the cable entry point is properly sealed to maintain the fixture's weather resistance (IP44).
Diagram Description: Shows a close-up of the cable entry point and a sealing mechanism.
Step 4: Wiring Connections
Open the terminal compartment. Connect the power wires: Live (L), Neutral (N), and Earth (?). Insert the stripped ends of the wires into the appropriate terminals and secure them.
Diagram Description: Shows the terminal block with labels L, N, and ?. Wires are shown being inserted. A close-up view details how to insert and secure wires in the terminal block.
Step 5: Securing Connections
Verify that all wire connections are firm and correctly inserted into the terminal block.
Diagram Description: A detailed view of the terminal block with wires connected.
Step 6: Cable Management and Closing
Route the power cable neatly and close the fixture's cover. Ensure it is properly seated and secured.
Diagram Description: Shows the internal wiring managed and the cover being closed over the fixture.
Step 7: Powering On
Once installation is complete, turn the power ON at the main circuit breaker.
Diagram Description: Shows a finger pressing a switch on a circuit breaker panel to the 'ON' position. The 'OFF' state is also depicted.
Product Identification
The fixture may have a serial number labeled on it. Look for 'HUE serial number' or 'Serial No: XXXXXX'.
Product Codes: 17435/**/P7, 17436/**/P7
Model Number: 4404 029 10912
The product is Zigbee certified, indicating compatibility with smart home systems.
Further Information
For more details, support, or to download the Quick Start Guide in various languages, visit the official Philips Hue website:
The Quick Start Guide is available in English, German, French, Spanish, Portuguese, and Italian.
Manufacturer Information
Signify
I.B.R.S. / C.C.R.I. Numéro 10461
5600 VB Eindhoven,
the Netherlands
Toll-free number: 00800-74454775
© 2021 Signify Holding. All rights reserved.
Last update: 05/2021
