Notification of the product
Please follow these instructions carefully for safe and effective use of the BangTong&Li pull-up fitness equipment.
Important Safety Precautions:
- Use this product indoors, as it is designed for household use.
- Before use, ensure all screws, nuts, and other fixing parts are securely installed.
- Wear sports clothes and perform a warm-up for about 5 minutes before exercise, followed by stretching after exercise.
- This equipment can be used for rehabilitation exercises by the elderly, children, and individuals with disabilities. However, keep children away from the product to prevent danger.
- Pay special attention to children; plastic bags can cause asphyxiation.
- Due to the product's weight and height, carry or move it with at least two people. Handle with care to prevent tipping or falling.
- Do not place or keep the product in unstable, inclined, slippery, or vibrating locations. Avoid places with smoke, moisture, dust, poor ventilation, extreme temperatures, or direct sunlight. Keep away from heating appliances. In case of an earthquake, move the product to a safe place.
- If you have any questions, please contact us by email.
Visual Indicators:
- Correct motion: ✅
- Wrong motion: ❌
Tightening Instructions for Non-Slip Screws
To secure the nuts on either side, use two wrenches. Hold one wrench steady while rotating the other to tighten the screw.
Sand Exit Instructions:
Sand is used for cleaning pipes and does not affect the product's use. You can move the sand exit to the back for aesthetic reasons.
Guarantee
BangTong&Li offers a one-year warranty. If you encounter any issues with the products received, please feel free to contact us. Your satisfaction is our top priority.
User Guide: BangTong&Li Pull-up Fitness Equipment Assembly Steps
The following exercise actions are for reference only.
Confirm the Contents of the Package:
- (A) Base: 2PCS
- (B) Major frame: 2PCS
- (C) U plate: 2PCS
- (D) Connecting pipe A: 1PCS
- (E) Connecting pipe B: 1PCS
- (F) Cross-bar B: 1PCS
- (G) Expansion pipe: 2PCS
- (H) Cross-bar A: 1PCS
- (I) Armrest: 2PCS
- (J) Armrest cushion: 2PCS
- (K) Safety cushion: 1PCS
Hardware Included:
- X14 (3) 10x65: 2PCS
- X2 (5) 10x75: 2PCS
- X42 (7) 10x50: 2PCS
- X6 (9) 10x50: 2PCS
- X2 (4) 6x55: 20PCS
- X6 (6) 6x55: 6PCS
- X6 (8) 6x55: 6PCS
- X2 Tools
Assembly Steps:
- Step 1: Connect (A) Base and (B) Major frame as shown. Ensure correct orientation.
- Step 2: Assemble (C) U plate as shown. If the condition is unstable, prevent the product from dumping.
- Step 3: Assemble connecting pipe (D) and (E) as shown. If the condition is unstable, prevent the product from dumping.
- Step 4: Assemble (F) cross-bars B as shown. If the condition is unstable, prevent the product from dumping.
- Step 5: Adjust the height of the expansion pipe (G) and fix it with the knob. If the condition is unstable, prevent the product from dumping.
- Step 6: Assemble the (H) cross-bar A as shown. Caution: be careful not to pinch your hand.
- Step 7: Assemble (I) armrest as shown. Caution: be careful not to pinch your hand.
- Step 8: Assemble the (J) armrest cushion as shown. Caution: be careful not to pinch your hand.
- Step 9: Assemble the (K) safety cushion as shown. Caution: be careful not to pinch your hand.
Finish