APP Instructions For HONITURE G20

Mainly about:

1. Connect to WiFi
• 1.1 AP mode
• 1.2 Bluetooth mode
2. Connect to Alexa
3. Schedule a cleaning
4. More Function
• 4.1 Set the suction power
• 4.2 Set the water level
• 4.3 Change voice language
• 4.4 Select work mode
5. Share device
6. Connect to Google Assistant

1. Connect to WiFi

1.1 AP mode

1. Download app: Scan the QR code with your mobile phone or search in Google Play Store (Android devices) / App Store (iOS devices) to download the Honysmart app.
   iOS: Compatible with Operating Systems 10 and higher.
   Android: Compatible with Operating Systems 8.0 and higher.
2. Sign up for your account and log in.
3. Click '+' in the upper right corner of the page and choose G20.
4. Start the Robot. Press and hold the Power button for 3 seconds to turn on the robot. The robot will say "Turn on".
5. Reset WiFi. Press and hold the Power button and Recharge button at the same time for at least 3 seconds, until you hear the robot saying "WiFi has been reset" and the Power button flashes slowly in blue.
6. Enter the correct WiFi name and password (connected to the same WiFi as your phone) and click "Next".
7. Click "Go to connect" and it will automatically jump to the setting page of your mobile phone.
8. Go to the WiFi setting page and find the "SmartLife-XXXX" hotspot network and click to connect to it.
9. Return to the app and wait for the device adding to complete.
10. Click "Done" to complete the connection.

1.2 Bluetooth mode

Before connecting: Make sure your phone's Bluetooth is turned on.

1. Click '+' in the upper right corner of the page and choose G20.
2. Start the Robot. Press and hold the Power button for 3 seconds to turn on the robot. The robot will say "Turn on".
3. Reset Wifi. Press and hold the Power button and Recharge button at the same time for at least 3 seconds, until you hear the robot saying "WiFi has been reset" and the Power button flashes slowly in blue.
4. Connect to 2.4GHz WiFi.
5. Waiting for Connection.
6. Click "Done" to complete the connection.

2. Connect to Alexa

Before connecting: Please make sure you have made the robot connected to your home WiFi and power on. Please make sure you have made your Alexa WiFi connected and powered on.

1. On the Alexa app, go to the Setting--Skill & Games--search "Smart life".
2. Enable this skill and type the account that you created for the G20 robot that already logging in.

3. Schedule a cleaning

1. Access the "Schedule" section within the app.
2. Tap "Add" to create a new cleaning schedule.
3. Set the desired time, repeat options, and cleaning switch status.

4. More Functions

4.1 Set the suction power

Navigate to "More" > "Suction" and select from "Gentle", "Normal", or "Strong".

4.2 Set the water level

Navigate to "More" > "Water Control" and select from "Low", "Middle", or "High".

4.3 Change voice language

Navigate to "More" > "Language" and select your preferred language from the list (e.g., English, German, French, Italian, Spanish).

4.4 Select work mode

You can choose Only Sweep/Only Mop/Sweep & Mop. Navigate to "More" > "Work Mode" and select your desired mode.

5. Share Device

Please ensure that the person being shared has also registered a HonySmart account. You can share your device by entering their account information. Ensure the dual-mode device is connected to the internet for the recipient to control the product.

6. Connect to Google Assistant

Before connecting: Please make sure you have made the robot connected to your home WiFi and power on. Please make sure you have made your Google assistant WiFi connected and powered on.

1. On the Google Home app, go to the "Set up a new device" and search "Smart life".
2. Enable this device, then type the account and password you created for the G20 robot that already logging in.