ZX Temperature & Humidity Sensor
Model: RSH-HS09
Technology: ZigBee
How It Works
- Install the battery into the device. Ensure your mobile phone is connected to the network and the smart gateway has been successfully added.
- Open the App. On the "Smart Gateway" page, click the "Add Sub Device" button and select "Temperature and Humidity Sensor".
- Press and hold the reset function button for more than 5 seconds until the indicator light flashes. Follow the APP instructions to add the device.
After successful addition, the device will appear in the "My Home" list.
Preparation for Use
Step 1: Connect your phone to Wi-Fi.
Diagram Description: A flow diagram illustrating the connection process: a 'Smart phone' connects to a 'Wi-Fi wireless router' via a network cable, which in turn connects to a 'ZigBee Hub'.
Ensure the product is within the effective coverage of the smart host (gateway) Zigbee network for a stable connection.
*Make sure that the smart host has been added.
Download and Open the App
Step 2: Download and open the App.
Search for "Smart Life" in your app store or scan the QR code provided to download and install the app. If this is your first time using the app, press the "Register" button to create an account. If you already have an account, press the "Login" button.
QR Code Description: A QR code is provided for downloading the "Smart Life" App.
Replacing the Battery
Diagram Description: An illustration shows the sensor. One view displays the sensor's front with a thermometer and wavy lines icon. Another view shows the sensor opened, revealing the battery compartment. Labels indicate 'Function keys', 'Indicator light', and the 'Battery' (CR2032).
The battery type is 3V CR2032 230mAh.
Product Specifications
| Product Name | Temperature and humidity sensor |
|---|---|
| Product Model | RSH-HS09 |
| Battery Type | 3V CR2032 230mAh |
| Temperature Detection Range | -10°C ~ 50°C |
| Temperature Detection Accuracy | ±0.5℃ |
| Humidity Detection Range | 0% ~ 95%RH (no condensation) |
| Humidity Detection Accuracy | ±5% |
| Wireless Protocol | Zigbee |
| Product Size | Φ29.3*53.4*10.5mm |
Packing List
- Sensor X 1
- User manual X 1
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
