Epomaker – epomaker
Epomaker – epomaker
Epomaker
DIY Guide: How to Replace Your Mechanical Keyboard Switches – epomaker
User Guide for EPOMAKER models including: EP108 108-Keys Hot Swappable Wired-Wireless Mechanical Gaming Keyboard, EP108, 108-Keys Hot Swappable Wired-Wireless Mechanical Gaming Keyboard, Wired-Wireless Mechanical Gaming Keyboard, Mechanical Gaming Keyboard, Gaming Keyboard, Keyboard
Epomaker EP108 Manual – epomaker
1 gün önce — PAIRING BLUETOOTH. 1. After the keyboard is turned on, press and hold Fn 1/2/3 until the indicator light flashes quickly to enter pairing mode.
16 hours ago — PAIRING BLUETOOTH. 1. After the keyboard is turned on, press and hold Fn 1/2/3 until the indicator light flashes quickly to enter pairing mode.
File Info : application/pdf, 6 Pages, 3.91MB
DocumentDocumentEN
EPOMAKER EP108
Print
Scroll Pause
Ins
Home PgUp
Del
End
PgDn
108-Keys Hot Swappable Wired/Wireless Mechanical Gaming Keyboard
Should you require more assistance please email us at support@epomaker.com
Made in China Manufacturer: Shenzhen Changyun Technology Co., Ltd. Address: Seventh Floor, Kai Daer Building, No.168 Tongsha Road, Xili Street, Nanshan Disctrict, Shenzhen,Guangdong, CN Email: support@epomaker.com
Web: www.epomaker.com
EC
REP
APEX CE SPECIALISTS LIMITED
Address: UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD CORK, T23 AT2P, IRELAND Contact: Wells Tel: +353212066339 Email: info@apex-ce.com
RoHS
COMPLIANT
WIN MODES
Fn+Esc (5s) Fn+Win Fn+S Fn+PgUp Fn+0 (numpad) Fn+F1 Fn+F2 Fn+F3 Fn+F4 Fn+F5
Fn+F6 Fn+F7 Fn+F8 Fn+F9 Fn+F10 Fn+F11 Fn+F12
Reset Win Lock MAC Modes Power Saving Battery Percentage My Computer Browser Computer Management Files Email Home Page Previous Track Play/Pause Next Track Search Lock Screen Lock Keyboard
CONNECTION MODE
Fn+1 Fn+2 Fn+3 Fn+4 Fn+5
BT1 BT2 BT3 2.4G Wired
MAC MODES
Fn+Esc (5s) Fn+Win Fn+S Fn+PgUp Fn+0 (numpad) F1 F2 F3 F4 F5
F6 F7 F8 F9 F10 F11 F12
Reset Win Mode MAC Modes Power Saving Battery Percentage Brightness Brightness + Task Manager Siri Previous Track Play/Pause Next Track Mute Volume Volume +
RGB SETTINGS
Fn+Backspace RGB Backlight On/Off
Fn+Ins
Change Backlight Effect
Fn+Home
Change Backlight Color
Fn+Del
Light Effect Direction
Fn+
Light Speed Adjustment
Fn+
Brightness Adjustment
EN
SWITCH THE CONNECTED DEVICE
1. Short press Fn+1/2/3/4/5 to switch the device connection mode 2. The indicator light flashes slowly during the connection process of the device, and the indicator light stays on for 2s after the connection is successful 3. If the connection fails, the indicator light goes out and the keyboard sleeps
PAIRING BLUETOOTH
1. After the keyboard is turned on, press and hold Fn+1/2/3 until the indicator light flashes quickly to enter pairing mode 2. Find the KC108 BT3.0/5.0 on the bluetooth receiving device and pair it with it. After the pairing is completed, the indicator light is always on for 2s 3. If the pairing fails, the keyboard indicator turns off and goes to sleep, please re-pair
PAIRING WIRELESS 2.4GHz
1. Press and hold 4 until the pairing indicator flashes quickly to enter the 2.4G pairing mode 2. Insert the 2.4G receiver and place the keyboard as close to the 2.4G receiver as possible 3. After the code matching is successful, exit the code matching, the mode light is always on for 10s 4. If the code matching device is not found successfully, the indicator light turns off and goes to sleep after 30s, please perform the code matching operation again.
POWER SAVE MODE
When wirelessly connected (Bluetooth/2.4G), turn off the backlight without any operation for 5 minutes, and enter into deep sleep without operation for 30 minutes Press Fn+PGUP to enter the battery saving mode.
SPECIFICATION PARAMETER
KEYS AMOUNT: KEYCAPS: HOTSWAP LIGHT: BATTERY CAPACITY: CONNECTIVITY: COMPATIBILITY: DIMENSION: WEIGHT:
108 Keys PBT YES RGB 6200mAh Type-C Wired & Bluetooth Wireless Windows/Mac 440mm×130mm×28mm 1030±20g
REPLACING KEYCAPS AND SWITCHES
For a full guide on how to remove keycaps and switches scan the QR Code or type in your browser: https://epomaker.com/blogs/guides/diy-guide-how-to-remove-and-replace-your-mechanical-keyboard-switches
Before installing switches, be sure the pins are clean and straight.
Push Straight Down
Please be gentle. Be sure the pins are aligned with the slots.
Included Tools
Mechanical
Switch
Example of a switch as seen from top after you remove the keycap to prepare for switch removal.
Logo Switch Shaft
Switch Puller
Keycap Puller
The Switch Puller tool aligns Vertically to the Switch to unclip the plastic securing the switch to the plate.
Remove Switches
1. Grab your Switch Removal Tool and align the gripping teeth vertically (on the Y-Axis) at the center of the switch, as shown in the example graphic above.
2. Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
3. Using firm but gentle force pull the switch away from the keyboard using a vertical motion.
Install Switches
1. Check that all the switch metallic pins are perfectly straight and clean. 2. Align the switch vertically to have the Gateron logo facing north. The
pins should align themselves to the keyboard PBC. 3. Press the switch down until you hear a click. This means your switch
clips have attached themselves to the keyboard plate. 4. Inspect the switch to ensure it's properly attached to your keyboard,
and test it.
Note: If the key doesn't work its possible you may have bent one of the switches while installing it. Pull the switch out and repeat the process.
Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing keycaps or switches. If you cannot remove or install keycaps or switches please contact customer service as soon as possible to avoid damage to the keyboard due to operating errors.
TECHNICAL ASSISTANCE
EN
For technical assistance, please email to support@epomaker.comwith your purchase order number and a detailed description of your issue.
We normally respond to enquiries within 24 hours. If you purchased your keyboard from a distributor or not from any official store of Epomaker, please contact them directly for any additional help.
COMMUNITY FORUMS
Join our community and learn together with other keyboard enthusiasts.
https://discord.gg/2q3Z7C2
https://www.reddit.com/r/Epomaker/
WARRANTY
EPOMAKER's Warranty covers any factory defects that might affect the proper functionality of your purchase. It doesn't cover any damage that may occur from normal wear and tear. If your product is defective we will send you a replacement unit. Replacement units might require you to send the defective unit back to Epomaker.
We provide a 1 year warranty for our products when bought from our website (EPOMAKER.com). Your item will not be covered by your 1 year warranty if the inspection shows any sign of modification or changes unsupported by the original product, these include: Changing internal components, Assembling and reassembling the product, Replacing Batteries, etc.
We will ONLY cover the item if it is bought from our official stores. You do not have a warranty with us if you bought the item from another reseller or likewise. Please contact the store that you bought your product from to resolve issues.
CN
EPOMAKER EP108
Print
Scroll Pause
Ins
Home PgUp
Del
End
PgDn
108/
support@epomaker.com
1687 : support@epomaker.com www.epomaker.com
EC
REP
APEX CE SPECIALISTS LIMITED
Address: UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD CORK, T23 AT2P, IRELAND Contact: Wells Tel: +353212066339 Email: info@apex-ce.com
RoHS
COMPLIANT
WIN
Fn+Esc (5s) Fn+Win Fn+S Fn+PgUp Fn+0 () Fn+F1 Fn+F2 Fn+F3 Fn+F4 Fn+F5
Fn+F6 Fn+F7 Fn+F8 Fn+F9 Fn+F10 Fn+F11 Fn+F12
WIN MAC /
Fn+1 Fn+2 Fn+3 Fn+4 Fn+5
1 2 3 2.4G
Mac
Fn+Esc (5s) Fn+A Fn+S Fn+PgUp Fn+0 () F1 F2 F3 F4 F5
F6 F7
F8 F9 F10 F11 F12
WIN MAC + Control+ siri -
/ +
RGB
Fn+Backspace
Fn+Ins
Fn+Home
Fn+Del
Fn+
+-
Fn+
+-
CN
1.Fn+1/2/3/4/5 2., 2s 3.
1.Fn+1/2/3 2.KC108 BT3.0/5.0 2s 3.
2.4G
1.42.4G 2.2.4G2.4G 3. 10s 4.30s
/2.4G,5 30 FN+PGUP,
: : : : :
108 PBT RGB 6200mah Type-C & Windows/Mac 440mm×130mm×28mm 1160±20g
2. 2.
4.
CN
https://discord.gg/2q3Z7C2 https://www.reddit.com/r/Epomaker/