Hilti Modular Support System
3.0 MODULAR SUPPORT SYSTEM
3.2.2 MT BASE CONNECTORS
MT-B-GXL S1 OC
Description
Base plate for fixation of MT-90 and MT-100 girder structures to 3.1"-6.9" steel flange widths (X-BT/S-BT/F-BT compatible).
Material Specifications
| Standard | Grade | Fⁱ, ksi (MPa) | F⁴, ksi (MPa) |
|---|---|---|---|
| GB/T 1591 | Q355 B | 51.49 (355) | 68.17 (470) |
1. Mechanical properties of GB/T 1591 Grade Q355 B meet or exceed the mechanical properties of ASTM A1011 SS Grade 50.
Corrosion Protection
Hot-Dipped Galvanized (HDG)
Ordering Information
| Description | Weight Per Piece lbs (kg) | Quantity Piece(s) | Item No. |
|---|---|---|---|
| MT-B-GXL S1 OC | 20.72 (9.4) | 2 | 2272106 |
Diagram: MT Girder Sandwiched to Steel
A diagram shows the MT-B-GXL S1 OC base plate connecting an MT-90/100 girder to a steel structure. Key components labeled are Fₓ, Fₗ, and the girder (A).
Table 93 - Allowable Strength Design (ASD) Load Data
| Fₓ lb (kN) | Fₗ lb (kN) | Fₗ lb (kN) | Mₓ lb ft (kN m) | Mₗ lb ft (kN m) | |
|---|---|---|---|---|---|
| 16,790 (74.7) | 3,345 (14.9) | 3,345 (14.9) | 4,835 (6.56) | 2,445 (3.32) |
1. Minimum safety factor, Ω, for tabulated values is 2.1.
2. Multiply tabulated values by 1.5 to obtain minimum Load and Resistance Factor Design (LRFD) values.
3. Tabulated values require that minimum grade 8.8 threaded rods must be used.
4. Tabulated values are for assembly shown in Figure 18. Design Professional is responsible for checking strength of supporting steel member.
5. Tabulated values are based on friction that is provided mechanically and not due to gravity loads.
Table 94 - Limit State Design (LSD) Load Data
| Fₓ lb (kN) | Fₗ lb (kN) | Fₗ lb (kN) | Mₓ lb ft (kN m) | Mₗ lb ft (kN m) | |
|---|---|---|---|---|---|
| 25,170 (112.0) | 5,035 (22.4) | 5,035 (22.4) | 6,290 (8.53) | 3,670 (4.98) |
1. Maximum resistance factor, Φ, for tabulated values is 0.7.
2. Tabulated values require that minimum grade 8.8 threaded rods must be used.
3. Tabulated values are for assembly shown in Figure 18. Design Professional is responsible for checking strength of supporting steel member.
4. Tabulated values are based on friction that is provided mechanically and not due to gravity loads.
Diagram: MT Girder Clamped to Steel
A diagram illustrates the MT-B-GXL S1 OC base connector clamping an MT-90/100 girder to a steel structure. It labels the forces Fₓ, Fₗ, and Mₗ, and shows the components A (MT-90/100) and the clamping mechanism (MI-SGC-M16).
Table 95 - Allowable Strength Design (ASD) Load Data
| Fₓ lb (kN) | Fₗ lb (kN) | Fₗ lb (kN) | Mₓ lb ft (kN m) | Mₗ lb ft (kN m) | |
|---|---|---|---|---|---|
| 14,380 (64.0) | 1,545 (6.88) | 1,545 (6.88) | 4,835 (6.56) | 2,100 (2.85) |
1. Minimum safety factor, Ω, for tabulated values is 2.3.
2. Multiply tabulated values by 1.5 to obtain minimum Load and Resistance Factor Design (LRFD) values.
3. Tabulated values are for assembly shown in Figure 19. Design Professional is responsible for checking strength of supporting steel member.
4. Tabulated values are based on friction that is provided mechanically and not due to gravity loads.
Table 96 - Limit State Design (LSD) Load Data
| Fₓ lb (KN) | Fₗ lb (kN) | Fₗ lb (kN) | Mₓ lb ft (kN m) | Mₗ lb ft (kN m) | |
|---|---|---|---|---|---|
| 21,580 (96.0) | 2,315 (10.3) | 2,315 (10.3) | 6,290 (8.53) | 3,145 (4.27) |
1. Maximum resistance factor, Φ, for tabulated values is 0.6.
2. Tabulated values are for assembly shown in Figure 19. Design Professional is responsible for checking strength of supporting steel member.
3. Tabulated values are based on friction that is provided mechanically and not due to gravity loads.
File Info : application/pdf, 2 Pages, 496.26KB
DocumentDocumentReferences
Adobe InDesign 18.2 (Macintosh) Adobe PDF Library 17.0
Power Tools, Fasteners and Software for Construction - Hilti USARelated Documents
 | HILTI MT- System (Outdoor) Environmental Product Declaration This Environmental Product Declaration (EPD) for the HILTI MT- System (Outdoor) provides comprehensive life cycle assessment data for the MT-100 OC profile, detailing environmental impacts from raw material extraction to end-of-life. |
 | Système de Rails Hilti MT : Spécifications Techniques et Applications Extérieures Découvrez le système de rails MT Hilti, conçu pour des applications extérieures robustes. Ce document détaille les spécifications techniques, les avantages et les diverses applications des rails MT Hilti, y compris les modèles MT-70, MT-80, MT-90, MT-90H et MT-100, soulignant leurs performances dans diverses conditions environnementales. |
 | HILTI MT-B-GXL Structural Mounting System Installation Guide Detailed instructions for assembling and installing HILTI MT-B-GXL S1, S2, and S3 structural mounting systems, including component lists and assembly steps. |
 | Hilti European Technical Assessments: Fire Resistant Solutions for Modular Support Systems Explore Hilti's European Technical Assessments for fire-resistant solutions for modular support systems, including MT System and pipe clamps. Discover innovative and ETA-approved systems for MEP supports under fire conditions, ensuring building safety and structural integrity. |
 | Hilti MT-SP Mounting System Components and Applications Guide to Hilti's MT-SP mounting system, detailing its use with MT-U-GL1, MT-70, MT-80, MT-90, and MT-100 profiles, and for pipe installations. Includes required quantities of MT-SP for various configurations. |
 | Connecteurs Hilti MT 90° Extérieur : Spécifications Techniques et Applications Spécifications techniques détaillées, applications et avantages des Connecteurs Hilti MT 90° Extérieur pour les structures de montage métallique et les supports MEP. |
 | Hilti Rails MT: Versatile Support Systems for MEP Installations Explore Hilti's Rails MT, a range of versatile C-channel support rails designed for efficient and simple installation in MEP (Mechanical, Electrical, Plumbing) applications. Discover technical specifications, advantages, and product codes for indoor and outdoor use. |
 | Hilti MT-RI Channel Installation Guide This guide provides instructions for installing Hilti MT-RI channels, including details on different channel types and mounting procedures. |