Introduction
This guide provides essential steps to get your ZTE MU5001 5G Mobile Hotspot up and running quickly. Learn how to prepare your device, install necessary components, and connect to the internet.
Getting Started
Preparation
Ensure you have a valid nano-SIM card. Locate the default Wi-Fi SSID, password, and Device Manager Website on the label inside the battery compartment.
Install Battery
Open the back cover, insert the battery, and then secure the cover.
Insert Nano-SIM Card
Use the provided ejector tool to open the SIM card tray. Place your nano-SIM card onto the tray and carefully slide it back into the device.
Power On Device
Press and hold the power button until the screen lights up. The device will automatically connect to the internet. Ensure the battery is charged if it is critically low.
Accessing the Internet
- Wi-Fi Connection: Connect your mobile devices to the MU5001's Wi-Fi network using the default SSID and password found on the device label.
- USB Type-C Connection: Connect the device to a computer using a USB Type-C cable for internet access.
- Network Cable Connection: Utilize the RJ45 LAN port to connect the device directly to a computer via a network cable.
Device Settings
Customize your device settings by accessing the 5G Mobile Hotspot configuration web page. Use the Device Manager Website IP address and password from the device label. Alternatively, many settings can be adjusted directly through the device's touch screen interface.
Troubleshooting & Support
This guide includes a troubleshooting section to help resolve common connection issues. For further assistance, users can contact ZTE via email at mobile@zte.com.cn or visit the official ZTE Devices website at www.ztedevices.com.
Home
