Instructions for POLARIS models including: TIF01, TIF01 2020 Toyota 79 Series Reverse Camera Integration, 2020 Toyota 79 Series Reverse Camera Integration, Reverse Camera Integration, Camera Integration, Integration

Office3

Wiring Diagram

Toyota Reverse Camera Integration - Polaris GPS

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
  

  File Info : application/pdf, 1 Pages, 342.61KB

  Document Document

TIF01 kit--2020 Toyota 79 series Instructions

1. Plug connector A directly into the back of the head unit

2. Plug connector B & C together

3. Plug Polaris miniature camera into connector D 4. Locate the 28 pin plug in the head unit (See Figure A)

Figure A

5. There is a GREEN wire from this pin that runs to a coil of black tubing. You should see a clip on the end of the GREEN wiring and this is needs to run to your reverse power.

6. Attach the clip to your reverse power which is a RED wire with BLACK stripe located in the DRIVERS SIDE KICK PANEL OR THE STEP PANEL

7. Put vehicle in reverse to test.

Note: If you do not have the camera plugged in when testing then nothing will happen on the screen

1300 555 514