Instruction Manual for RISUN MOTOR models including: UKC-1, Sine Wave Controller Connection
No information is available for this page.
36V-72V 1000W-2000W 45A eBike Controller with LCD Display Bluetooth Module 2.
Endless Sphere - Search
Sine Wave Controller Connection Manual 1. Power Supply: XT60 Male Plug (Yellow) Controller Side Battery Side XT60 Male Plug (Yellow) Red: Positive Red: Positive Black: Negative Black: Negative 2. Motor Cable 3-Phase Connection: "O" Ring Connection on Controller 3-Phase Controller Side Motor Side Yellow: A Phase Yellow: A Phase Blue: C Phase Blue: C Phase Green: B Phase Green: B Phase 3. Motor Cable Hall Sensor Connection: White DJ7061Y-2.8-21 Female Plug Controller Side Motor Side DJ7061Y-2.8-21 Female (White) DJ7061A-2.8-11 Male Red Red White If your motor has internal speed detector hall sensor, please plug this, otherwise just keep it empty. Black Black Yellow Yellow Green Green Blue Blue If you want motor rotate as reverse direction with original speed, then just need to change setting via computer or mobile phone: "Parameter Setting--MOTOR--Motor Rotate Direction", change value as 0 or 1 4. LCD Control Panel Connection: Black SM-5A Male plug Controller Side LCD Side SM-5A Male (Black) SM-5A Female Red Red Blue Blue Black Black Green Green Yellow Yellow If you don't want to use LCD, please just plug the jumper connector as follow photo (connect red and blue): 5. Throttle Connection: Black SM-3Y Female Plug Controller Side Throttle Side SM-3Y Female (Black) SM-3Y Male Red Red Black Black Green(Signal) White or other color(signal) 6. Electric Lock: White 2.8B-2 Female plug Controller Side DJ7021Y-2.8-21 Female (White) Red Pink If you use your own throttle and without electric lock, then please just loop as follow photo: 7. Brake Levers Connection: 2 x Black SM-2Y Female plugs Controller Side 2x SM-2Y Female (Black) Black Brown 8. PAS Connection: Black SM-3A Male plug Controller Side PAS Side SM-3A Male (Black) SM-3A Female Red Brown Black Black White (Signal) Yellow(Signal) 9. Speed Limit Connection: Black SM-2Y Female plug Controller Side SM-2Y Female (Black) Blue Blue If you want to active definite value speed limit at any time, please set speed limit value via computer or mobile phone (set percentage of full speed), and then install a switch on handlebar, you can active or cancel speed limit through this switch. 10. Alarm Connection: Red DJ7021A-2.8-11 Male, Red DJ7021Y-2.8-21 Female Plugs Controller Side DJ7021A-2.8-11 Male (Red) Red (Power input Positive) Black (Power input Negative) DJ7021Y-2.8-21 Female (Red) Yellow Brown Blue 11. Head Light Connection: Black SM-2A Male (Black) plug Controller Side SM-2A Male SM-2Y Female Red Your switch/head light positive wire Black Your head light negative wire 12. Bluetooth Connection: DJ7031A-2.8-11 Male (White) + DJ7031Y-2.8-21 Female (White) Controller Side DJ7031A-2.8-11 Male (White) DJ7031Y-2.8-21 Female (White) Yellow Yellow Green Green Brown Black (1). Connected: If you use colorful display, please connect both plugs (please check below photo). (2). Disconnected: If you use Bluetooth module and not use colorful display, please disconnect both plugs (please check below photo). 13. USB Data Cable Connection: (1) Connect with computer via USB Adapter Cable (2). Connect with mobile phone via Bluetooth moduleMicrosoft Word 2019