IKEA MALM Dressing Table Assembly Instructions

Safety Warnings

WARNING: Serious or fatal crushing injuries can occur from furniture tip-over. ALWAYS secure this furniture to the wall using tip-over restraints.

To further reduce the risk of serious injury and death from tip-overs:

• Place heaviest items in the lower drawer.
• Do not set TVs or other heavy objects on top of this product.
• Never let children climb or hang on drawers, doors, or shelves.

Hebrew Warning:

אזהרה

נפילת הרהיט עלולה לגרום לפגיעה גופנית חמורה או קטלנית. יש לקבע את הרהיט לקיר באמצעות אבזרי הקיבוע המצורפים.

על-מנת למזער את סכנת הפגיעה הגופנית או המוות מנפילת רהיטים:

• מקמו את הפריטים הכבדים ביותר במגירה התחתונה.
• הימנעו מלהניח טלוויזיות או פריטים כבדים אחרים על מוצר זה.
• אין לאפשר לילדים לטפס על המגירות, הדלתות או המדפים.

Assembly Steps

The following steps detail the assembly of the IKEA MALM dressing table. Ensure all parts are present before beginning.

Tools and Parts Overview

The following tools are recommended for assembly:

• Screwdriver (Phillips head)
• Hammer
• Drill with drill bits (Ø 8 mm (5/16"), Ø 3 mm (1/8"))

Parts List:

The document includes a comprehensive list of parts with corresponding numbers and quantities. Key components include:

• Large screws (e.g., 114334, 110519)
• Wooden dowels (e.g., 101353, 101345)
• Drawer slides (e.g., 118250)
• Various brackets and connectors (e.g., 122998, 10003193)
• Small screws (e.g., 109558, 100823)
• Wall mounting hardware (screws, plugs, brackets)

Step-by-Step Assembly:

1. Step 1: Attach the first set of screws (114334) to the base panel.
2. Step 2: Assemble the drawer slides (118250) to the side panels using screws (100349).
3. Step 3: Insert wooden dowels (101353) into the side panels.
4. Step 4: Connect the side panels to the base panel using the dowels and screws.
5. Step 5: Attach the drawer support pieces (153548) to the side panels using screws (113453).
6. Step 6: Secure the wall mounting brackets (106989) to the top rear of the unit using screws (109049 and 100823).
7. Step 7: Place the top panel onto the assembled frame.
8. Step 8: Attach the back support brackets (10003193) to the underside of the top panel.
9. Step 9: Secure the top panel to the side panels using screws (109560).
10. Step 10: Assemble the drawer components.
11. Step 11: Insert the assembled drawer into the unit.
12. Step 12: Wall Mounting Instructions: The supplied screws and plugs are suitable for most solid (A) and hollow (B) walls. For solid wood (C), use screws without plugs. If uncertain, seek professional advice.
13. Step 13: Attach the final brackets to secure the unit to the wall.
14. Step 14: Insert the drawer runners into the drawer.
15. Step 15: Attach the drawer front using dowels (101345).
16. Step 16: Secure the drawer runners to the drawer sides using screws (110630).
17. Step 17: Slide the drawer into the unit.
18. Step 18: Attach the drawer front panel using screws (110519).
19. Step 19: Attach the drawer bottom panel using screws (110678).
20. Step 20: Insert the drawer into the unit.
21. Step 21: Secure the drawer with screws (109558).

Wall Mounting Details

The following diagrams illustrate how to mount the furniture to the wall using appropriate hardware for different wall types:

• Type A (Solid Wall): Drill a Ø 8 mm (5/16") hole, insert the plug, and secure with a screw. Depth: 70 mm (2 3/4").
• Type B (Hollow Wall): Drill a Ø 8 mm (5/16") hole, insert the plug, and secure with a screw. Depth: approximately 30 mm (≈1 1/4").
• Type C (Solid Wood): Drill a Ø 3 mm (1/8") hole and secure with a screw. Depth: approximately 30 mm (≈1 1/4").