Aosu SolarCam D1 Max Quick Start Guide

I. What's Included

The following items are included in the package:

• 1. Camera (C9S2CH11)
• 2. Screw Pack
• 3. USB-C Charging Cable
• 4. Mounting Bracket
• 5. Quick Start Guide
• 6. Position Sticker

(Also listed in French, German, Spanish, Italian, and Japanese)

II. Product Overview

The camera features the following components:

• 1. Antenna
• 2. PIR Motion Sensor
• 3. Lens
• 4. Status LED
• 5. Infrared LEDs
• 6. Microphone
• 7. White LED Spotlights
• 8. USB-C Port
• 9. Charging Indicator
• 10. Speaker
• 11. Power
• 12. Micro SD Card Slot
• 13. Reset Button

(Also listed in French, German, Spanish, Italian, and Japanese)

Capacity Requirements: 8-128GB

Read and Write Speed Requirements: Class 10

File Format: FAT32

(Also listed in French, German, Spanish, Italian, and Japanese)

III. System Setup

To set up your Aosu camera:

1. Download the Aosu App from the App Store (iOS devices) or Google Play (Android devices).
2. Sign up for an Aosu App account.
3. Follow the onscreen instructions to complete the setup.

(Also listed in French, German, Spanish, Italian, and Japanese)

IV. Mounting the Camera

Height and Location:

• 1. Camera Field of View
• 2. Motion Detection Zone
• 3. Recommended height: 7-10 ft (2-3 meters)
• 4. Maximum detection range: Up to 30 ft (10 meters)

(Distances also listed in French, German, Spanish, Italian, and Japanese)

Camera Installation:

• 1. Sticker
• 2. Wall
• 3. Wall Anchors
• 4. Base Bracket
• 5. Screws
• 6. Camera

(Also listed in French, German, Spanish, and Japanese)

Solar Panel Angle:

Adjust the solar panel left or right by loosening the locking screw cap, turning the sleeve rod, and retightening the locking screw cap. The solar panel's angle can be adjusted up or down up to 90°.

(Instructions also listed in French, German, Spanish, Italian, and Japanese)

V. Notice

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.

FCC Radio Frequency Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The minimum separation distance is 20cm.

IC Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

(French translation provided)

IC RF Statement

This equipment complies with IC RSS - 102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

(French translation provided)

Declaration of Conformity (English)

Aosu declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the Web site: https://www.aosulife.com. This product can be used across EU member states.

Do not use the Device in the environment at too high or too low temperature, never expose the Device under strong sunshine or too wet environment.

The suitable temperature for Camera and accessories is -10°C - 50°C.

RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body.

For Camera: Wi-Fi Operating Frequency Range: 2412~2472MHz; Wi-Fi Max Output Power: 17.13dBm(EIRP)

This product is designed and manufactured with high quality materials and components, which can be recycled and reused. ♻️

This symbol ♻️ means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment.

For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

(Similar declarations also provided in French, German, Spanish, and Italian)

VI. Customer Service

For customer service and support, please refer to the contact information provided by Aosu, typically found on their website or within the product packaging.