Xfinity Wireless TV Box: Get Started
Setting Up Your Device
This guide will help you set up your Xfinity Wireless TV Box.
Included Components:
- Wireless TV Box: A compact, rectangular device designed for streaming.
- Voice Remote: A remote control requiring 2 AA batteries, featuring voice command capabilities.
- Power Adapter: Used to supply power to the TV Box.
- HDMI Cable: Connects the TV Box to your television.
Setup Instructions:
- Before you begin: Ensure your Xfinity Wireless Gateway is powered on and activated, and within range of your Streaming TV Box. A wired connection using an Ethernet cable (not included) is also an option. Remove any protective clear film from your devices. If you have a Primary TV Box, confirm it is also powered on and activated.
- Connect to TV: Secure the HDMI cable between your TV and the Wireless TV Box. Turn on your TV and select the appropriate HDMI Input.
- Power Up: Plug the power adapter into an electrical outlet and connect the other end to the Power port on the Box. Once the power indicator lights up, the box is ready. Use only the supplied power adapter and avoid outlets controlled by dimmers.
- Activate Remote: Remove the pull tab from the back of the remote, aim it toward the Box, and wait for onscreen instructions.
Note: The billing for your new Xfinity service(s) will begin within 5 days from the date your order for service(s) is placed.
Regulatory Information
Federal Communication Commission (FCC) Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Country Code selection feature to be disabled for products marketed to the US/CANADA.
Industry Canada Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
- (1) This device may not cause interference
- (2) This device must accept any interference, including interference that may cause undesired operation of the device
The licence-exempt transmitter(s)/receiver(s) contained in this apparatus comply with Industry Canada's licence-exempt RSS(s). Operation is authorized under the following two conditions:
- (1) The apparatus must not produce interference;
- (2) The apparatus must accept any radio interference, even if the interference is likely to compromise its functioning.
Caution:
- (i) the device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
Operations in the 5.25-5.35GHz band are restricted to indoor usage only.
Avertissement:
- (i) les dispositifs fonctionnant dans la bande de 5 150 à 5 250 MHz sont réservés uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;
Les opérations dans la bande de 5.25-5.35GHz sont limités à un usage intérieur seulement.
Radiation Exposure Statement: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Déclaration d'exposition aux radiations: Cet équipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrôlé. Cet équipement doit être installé et utilisé à distance minimum de 20cm entre le radiateur et votre corps.
