Low Voltage Lighting Systems User Guide

1. THE COMPONENTS LIST

Components included:

• LED Controller (1 pcs)
• RF Control (1 pcs)
• POWER SUPPLY (1 pcs)
• RGB LED strip (1 pcs)

Description of connections:

USB Connector: Connect the lights to the controller.

2. INSTALLATION

1. Fix the LED strip on the furniture.
2. Screw the LED controller on furniture. Note: The controller cannot be installed in closed metal parts.
3. Connect the lights to the controller.
4. Connect the controller to the power supply.
5. Plug the power supply into the circuit.
6. Operate the Remote control to control the light bar (pull out the battery insulation before use).

Battery replacement method:

Pull out the battery insulation [?️]. Battery replacement method: CR2025 [?].

3. SPECIFICATIONS

• Power Supply: Input: 100-240V, 50Hz/ 60Hz
• LED lighting: Input: DC 12V
• Output: 12Vdc, Max. 4.0A
• Power: Max. 7.2 W/M

4. RF wireless Remote RGB LED Controller Instructions

Music Remote (Advanced Version)

Remote control pairing instruction:

1. Connect the light fixture to a USB port. Press and hold the "ON" button on the remote control within 5 seconds after the LED lights are powered on. The LED lights flash, indicating it is in searching and pairing mode.
2. The LED lights stop flashing, indicating that the remote control has been successfully paired with the light fixture.
3. This light fixture will not be controlled by another remote control until you perform the above pairing operation again.

APP mode

The APP name is "duoCo Strip". Please search for and install the APP using the QR code.

Functions are listed as follows:

• Adjust the brightness and color temperature of 16 million colors for monochrome LED strips.
• Six color sequence modes to choose from: Static, Strobe Flash, Gradual Change, Cross-Fade, and Jump Change, each with multiple color modes.
• In music sync mode, the LED lights can change color and speed to sync with the rhythm of the music.
• In External Microphone mode: the built-in high-sensitivity microphone can adjust the speed and color of the lighting to match the surrounding sounds.
• Schedule: Select the date and time to turn on/off the timing light. The light will turn on/off for the set time.

Interface Navigation:

• (1) Click to show the lamp list, view lamp list. [?]
• (2) Switch to color and brightness interface: Switch the color wheel, adjust the color, display RGB value, click to manual adjustment view. [?]
• (3) Switch to the mode interface: Scroll the selection mode, adjust speed, adjust luminance. [⚙️]
• (4) Switch to the music rhythm: Previous song, Pause/play, Next song, Recycle mode, Music list. [?]
• (5) Switch to the microphone rhythm interface: Music rhythm through cell phone microphone, Phone Microphone Mode, External Microphone Mode, 4-style rhythm, change the sensitivity of MIC to match the sound. [?]
• (6) Switch to the schedule: Set the time of Light-On, Enable or disable the light-On function, Set the time of Light-Off, Enable or disable the Light-Off function. [⏰]
• (7) Switch to the modify pin sequence interface: Click to save the new assignment, change the real color of this line. [➡️]

Local music download instructions:

For Android phones: Use music players to download or copy songs from computers to mobile phones. Restart "duoCo Strip" and switch to the Music Rhythm Interface to see the newly imported music files.

For iPhones: Install iTunes software on your computer. Log in to iTunes with the same Apple ID account on the iPhone. Use iTunes to import downloaded music files. The imported music files will be synchronized to the iPhone in real time. Restart and switch to the Music Rhythm Interface to see the newly imported music files.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

• (1) This device may not cause harmful interference, and
• (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.