Instructions for Metra models including: Metra, Replacement, Headlight, with, Halo, and, Turn Signal

ZXLSL-243

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • Text

File Info : application/pdf, 1 Pages, 1.14MB

Replacement Headlight with Halo and Turn Signal
The headlight replacements come with a H4 connector. This connector contains, both high and low beam connections, and a common ground.
To use the DRL function, connect the DRL wire to a switched +12V source, such as an accessory or ignition circuit. The DRL halo will illuminate when this circuit is activated. Connect the Turn Signal wire to the +12V source for the turn signal light for that side of the vehicle.

386-257-2956

www.MetraOnline.com

460 Walker Street, Holly Hill, FL 32117
1/21