Ensenior Ultra-Thin LED Recessed Lighting

Product Overview

Ensenior offers a range of ultra-thin LED recessed lights designed for easy installation and superior performance. Available in various sizes (4-inch and 6-inch) and configurations (single color temperature, selectable color temperature, and multi-color temperature options), these lights are suitable for a wide array of applications.

Key features include:

• Ultra-thin design for minimal ceiling clearance requirements.
• Integrated junction box for simplified wiring.
• Dimmable functionality for adjustable lighting levels.
• High brightness output (e.g., 750LM, 1050LM) with energy efficiency (e.g., 9W, 12W).
• ETL and Energy Star certifications for safety and energy efficiency.
• Selectable color temperatures (e.g., 2700K, 3000K, 3500K, 4000K, 5000K, 6000K) allowing users to choose their preferred white light.

Installation Guide

Important Safety Information: Always turn off power at the circuit breaker or fuse box before beginning installation. If you are unsure about any part of the installation process, consult a qualified electrician.

1. Prepare the Opening: Ensure the ceiling opening is the correct size for the selected Ensenior light model.
2. Connect the Wiring: Open the junction box attached to the LED light. Connect the house wires to the corresponding wires in the junction box (typically black to black, white to white, and ground to ground) using wire connectors.
3. Secure the Junction Box: Place the connected wires into the junction box and close the cover securely.
4. Install the Light Fixture: Insert the LED light fixture into the prepared ceiling opening. The integrated spring clips will hold the fixture in place.
5. Restore Power: Turn the power back on at the circuit breaker or fuse box.

Color Temperature Selection

For models with selectable color temperature (CCT), a switch is typically located on the junction box or the fixture itself. Before installing the fixture, slide the switch to your desired color temperature (e.g., 2700K for warm white, 4000K for neutral white, 5000K for cool white).

Note: Ensure the power is off before adjusting the CCT switch.

Troubleshooting

• Light does not turn on: Check that the power is on, the wiring connections are secure, and the circuit breaker is not tripped.
• Flickering: Ensure the dimmer switch is compatible with LED lights and is rated for the correct wattage. Loose wiring can also cause flickering.

Product Specifications

Refer to individual product packaging or the Ensenior website for detailed specifications, including lumen output, wattage, beam angle, and lifespan for specific models.

Example Specifications (may vary by model):

Warranty and Support

For warranty information and customer support, please visit the official Ensenior website or contact their customer service department.