Manuals+

Instructions for Firmware Upgrading

Applicable for GardePro A3

  1. Press MENU, go to "Version" menu option, check current firmware version number.
  2. Check the website if there is a latest firmware available for your camera model. If yes, please download it from the website.
  3. Copy the firmware into the SD card drive.
  4. Insert SD card back into the camera, and make sure battery power is sufficient.
  5. Press and hold the MENU key.
  6. Move the power switch to the "SET" position.
  7. The camera will start the process of upgrading; it will take about 50-60 seconds.
  8. After completion, the camera will reboot automatically.
  9. Please check the "Version" in the menu settings to confirm it is correct.
  10. All done, congratulations! Enjoy your upgraded camera!

PDF preview unavailable. Download the PDF instead.

Instructions-for-GardePro-A3-Firmware-Upgrading Adobe PDF Library 15.0

Related Documents

PreviewGardePro A3 Trail Camera Instruction Manual
Comprehensive instruction manual for the GardePro A3 Trail Camera, covering setup, operation, features, and technical specifications for wildlife observation and security.
PreviewGardePro E6 Trail Camera Instruction Manual
Comprehensive instruction manual for the GardePro E6 Trail Camera, covering setup, features, operation, Wi-Fi connection, advanced settings, mounting, troubleshooting, and warranty information.