ISKÄRNA LED Table Lamp
Design and Quality IKEA of Sweden
Important Safety Instructions
⚠️ For indoor use only.
Regularly check the cord, the transformer, and all other parts for damage. If any part is damaged, the product should not be used.
Important information! Keep these instructions for future use.
Light Source Replacement
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
Product Components
The package includes one power adapter and two connecting cables.
[Illustration shows a power adapter with two cables. A label indicates '1x'. Previous illustrations show a person looking confused at parts and another person consulting a device.]
Assembly and Usage
[Illustration shows two steps: 1. Connecting a cable to the back of the lamp. 2. Connecting the other end of the cable to the power adapter.]
- Connect the cable to the lamp.
- Connect the other end of the cable to the power adapter.
[Illustration shows two steps for operation. Step 1 (x1): Pressing the button on the lamp to turn it on/off. Step 2 (x2): Pressing the button twice to cycle through colors, indicated by a color wheel and light bulb.]
To operate the lamp:
- Press the button once (x1) to turn the lamp on or off.
- Press the button twice (x2) to cycle through different light colors.
[Illustration shows two more steps for operation. Step 1 (x3): Pressing the button three times to cycle through modes/colors, indicated by a rotating color wheel. Step 2 (x4): Pressing the button four times to turn the lamp off, indicated by a light bulb with a line through it.]
- Press the button three times (x3) to cycle through lighting modes or colors.
- Press the button four times (x4) to turn the lamp off.








