ARES 4L Manual Brake Fluid Bleeder
Operations Manual & Warranty Information
Operations Manual
Safety Caution
⚠️ Brake fluid is corrosive. When fluid spills, use water to flush away immediately. (Compatible with ARES 18007 12-Piece Master Cylinder Adapter Set)
Filling Procedure
- Make sure no pressure remains inside the unit. Pressure can be released from the release valve by the side of the pump.
- Remove new fluid cap on top of the unit, and fill the unit with new brake fluid. Make sure no remaining old fluid or debris is in the tank.
Operating Instruction
- Select the adapter provided with the unit, or a suitable adapter from the ARES Master Adapter Set (sold separately). Install the adapter to the master cylinder of the brake system.
- Pump the handle of the unit until recommended bleeding pressure is reached. Connect the bleed hose to the bleed valve nipple, and the other end to a suitable bleeding reservoir. Open the brake bleed nipple by turning 1/4 turn, or until fluid starts to flow. After seeing the new, fresh brake fluid flowing into the bleeding reservoir, close off the brake bleed nipple. Repeat the process on all 4 wheels.
- Once the process is complete, release the pressure by pressing down on the release valve by the side of the pump. After releasing, disconnect the fluid supply hose from the adapter on the master cylinder. Note: Do not disconnect the adapter before releasing the pressure.
- If necessary, adjust brake fluid level in the master cylinder by filling fresh brake fluid to the fill line. Replace the master cylinder cap.
- Dispose of old or used brake fluid safely and in accordance with local regulations. DO NOT dispose of brake fluid in a drain or by conventional waste disposal means.
Need Help?
❓ Need Help?
Phone: (206) 453-6776
Website: www.arestool.com
Email: customerservice@arestool.com
Don't forget to register your product!
Warranty Information
You are backed by the ARES Tool Performance Assurance!
ARES TOOL warrants this product (excluding carrying cases and storage accessories and certain product categories) to the original purchaser for its useful life (not to exceed one year for products with electrical or electronic components) against defects and deficiencies in material and workmanship.
This LIMITED LIFETIME WARRANTY does not cover products that have been subject to negligence, misuse, abuse, accident, improper storage, alteration, improper repair, disassembly, or reassembly. Normal wear and tear are also excluded. Deficient products will be replaced or repaired.
For more details or to receive support, please call or email:
Phone: (206) 453-6776
Email: ares@arestool.com
This warranty excludes blades, bits, bit sockets, carrying cases, pouches, torque products, punches, dies, bulbs, fuses, batteries, and other consumables which must be replaced under normal use and service. These warranties are the sole warranties applicable to Products and are in lieu of all other warranties, whether expressed, implied, or statutory. The implied warranties of merchantability and fitness for a particular purpose are specifically excluded. The customer's sole and exclusive remedy for breach of this Warranty is, at the option of ARES TOOL, repair or replacement of the defective product.
Please visit WWW.ARESTOOL.COM to register your product and sign up for our ARES Tool Club.
Product Origin and Safety Information
Origin: B22 MADE IN CHINA (HECHO EN CHINA / FABRIQUÉ À CHINA)
⚠️ WARNING: Cancer and Reproductive Harm - Visit www.p65warnings.ca.gov
?️ ALWAYS WEAR EYE PROTECTION THAT COMPLIES WITH ANSI STANDARD.
⭐ LIMITED LIFETIME PERFORMANCE ASSURANCE WARRANTY
♻️ PLEASE RECYCLE
