l Before using an AFD always refer to the operating and warning instructions supplied with the tool. l For AFD models maximum power is achieved at 50% of no load speed. AFD Applications Ease of Incorporation into Machine or Process 3 lExtensive range of mounting clamps
Auto Feed Drills & Tappers Chicago PneumaticTM AFD Features Desoutter Auto Feed Drill and Tapper Features Integral belt tensioner on AFDE and AFTE models Heavy duty belts and pulleys on AFDE and AFTE models. Modular Control Block Options A1 - Full Feature Block l Pneumatic signal ports for stop, start and cycle complete l Facility for using proximity switches to sense depth and datum positions l Control of feed and retract speed A6 - Simple Control Block l Forward and retract port for control via remote valves l Facility for using proximity switches to sense depth and datum positions Rigid cast aluminium housing Motor Powers up to 2.2kW(3.OHP) Optional hydraulic control unit for fine feed control and reduction of `break through' force New crosshead design providing high torque resistance Dynamic thrusts up to 2670N (600lbf) Front of tools sealed to IP64** Interchangeable modular output spindles including multiple spindle and tapping heads General Information l All performance data is obtained at a line pressure of 6.3±0.15 bar in accordance with ISO2787 (1984). l All speeds are nominal. l Performance data is subject to alteration without prior notice. l Unless stated otherwise dimensions are in mm. l All imperial dimensions and performance data have been calculated from the measured metric values. l Sound levels are ±2dB(A) measured using CAGI-PNEUROP test code. l Before using an AFD always refer to the operating and warning instructions supplied with the tool. l For AFD models maximum power is achieved at 50% of no load speed. 2 l Modular components for flexibility of speed and function l Simple interfaces for communicating to other equipment l Control options including peck feed, dwell and skip feed ** AFD415, AFDE400/410 and AFDE600/610/62O tools only AFD Applications Model Type Pneumatic Feed and Drive AFD205, AFD215 0.22kW (0.29HP) AFD415 0.38kW (0.50HP) AFD/AFT60 0.52kW (0.70HP) Pneumatic Feed, Electric Drive AFDE200 0.25kW (0.33HP) AFDE400, AFDE600 0.33kW (0.40HP) AFDE410, AFDE610 0.75kW (1.00HP) AFDE620 1.10kW (1.50HP) AFDE700 1.50kW (2.00HP) AFDE710 2.20kW (3.00HP) Electric Feed and Drive via Leadscrew AFTE270 0.18kW (0.24HP) AFTE470 0.38kW (0.50HP) AFTE480 0.75kW (1.00HP) Ease of Incorporation into Machine or Process l Extensive range of mounting clamps l Control interfaces to link AFD(E) to other equipment through pneumatics or electrically l Single signal required for AFD(E) to perform cycle l Output signals at datum and depth l Electric motor mounting on 200, 400 and 600 series can be rotated through 180º Modular Design l Flexibility of unit function and speed l Common components in differing models reducing inventory l Multiple spindle head options l Drill and tapping options for all models Model Codes No Load Speed The free output speed of the drill or tapper with no drilling or tapping load applied. Control Block A1 Full feature type* A6 Simple type** A7 Leadscrew type A8 Leadscrew type Automatic cycle Remote cycle control PNP NPN Output Spindle** Output spindle to be supplied. How to Order AFDE400 -- * Not required on AFTE models. ** Does not apply for AFD60 and AFT60. 2850 -- A1 + B24 Model Code No Load Speed Control Block Output Spindle 3 What is an AFD? Drilling Pneumatic Drive 4 The Desoutter range of Auto Feed Drills and Tappers are fixture mounted tools combining linear feed and rotation for machining and tapping operations. There are 3 basic model types: l AFD/AFT Pneumatic Feed and Drive l AFDE Pneumatic Feed with Electric Drive l AFTE Electric Drive and Feed via a Leadscrew A wide range of accessories allow the tools to be configured to suit the application and include mounting clamps, output spindles, multiple spindle heads and various control options for interfacing with PLC's or pneumatics. AFD205/ AFD215 pneumatic drive l Options of compact AFD205 or long stroke AFD215 l High thrust / size ratio l Capacity up to 5mm (3/16") in aluminium l Modular output spindles SPEED 650, 1000, 2700, 4350, 10000, 18700 TOOL TYPE AFD205 AFD215 POWER HP 0.30 0.30 THRUST N 400 400 STROKE mm 50 90 WEIGHT kg 3.9 4.2 AFD415 pneumatic drive l Compact unit design l Long working stroke of 100mm (3.94") l Spindle sealed to IP64 standard l Capacity up to 8mm (5/16") in mild steel, 10mm (3/8") in aluminium l Modular output spindles SPEED 490, 790, 1250, 2100, 3400, 5400, 7000, 18000 TOOL TYPE AFD415 POWER HP 0.51 THRUST N 706 STROKE mm 100 WEIGHT kg 6.2 AFD60 pneumatic drive l Heavy duty pneumatic unit l Chuck supplied fitted to tool, 10mm (3/8") for 1600-4300rpm and 13mm (1 / 2") for 550-1000rpm l Full feature control block fitted as standard l Capacity up to 16mm (5/ 8") in aluminium, 12mm(1 /2") in mild steel SPEED 550, 700, 1000, 1600, 2100, 3000, 4300 TOOL TYPE AFD60 POWER HP 0.70 THRUST N 1200 STROKE mm 95 WEIGHT kg 8.1 Drilling Electric Drive AFDE200 electric drive l Compact unit size l High speed options up to 22400 rpm @ 50Hz, 26900 rpm @ 60Hz with K42 output l Capacity up to 5mm (3/16") in aluminium l Modular output spindles SPEED 850, 1200, 2350, 2850, 3750, 4600, 5250, 8000, 10000 TOOL TYPE AFDE200 POWER HP 0.34 THRUST N 320 STROKE mm 90 WEIGHT kg 10.1 AFDE400/ AFDE410 electric drive l Comprehensive speed range 330-10000 rpm @ 50Hz, 400-11900 rpm @ 60Hz l 0.33kW (0.44HP) and 0.75kW (1.00HP) options l Capacity up to 10mm (3/8") in aluminium or 8mm (5/16") in mild steel l Spindle sealed to IP64 standard l Modular output spindles SPEED 330, 550, 900, 1200, 1450, 1750, 2350, 2850, 3750, 4600, 5250, 8000, 10000 TOOL TYPE AFDE400 POWER HP 0.44 THRUST N 724 STROKE mm 100 WEIGHT kg 11.4 SPEED 330, 550, 900, 1200, 1450, 1750, 2350, 2850, 3750, 4600, 5250, 8000 AFDE410 1.00 724 100 12.4 AFDE600/ AFDE610/ AFDE620 electric drive l 3 power ratings to give optimum power / thrust combination l Heavy duty belts and pulley drive with integral belt tensioner l Capacity up to 12mm (½") in mild steel l Spindle sealed to IP64 standard l Modular output spindles SPEED 330, 550, 900, 1200, 1450, 1750, 2350, 2850, 3750, 4600, 5250 TOOL TYPE AFDE600 AFDE610 AFDE620 POWER HP 0.44 1.00 1.47 THRUST N 1557 1557 1557 STROKE mm 100 100 100 WEIGHT kg 17.4 18.4 22 AFDE700/ AFDE710 electric drive l Heavy duty drill unit l Base mounted with cross key location l Compact design l Capacity up to 20mm (3/4") in mild steel l Hydraulic feed option available upon request to provide up to 7400N (1660 lbf) of thrust SPEED 140, 280, 460, 950, 1400, 1900, 2850, 4750 TOOL TYPE AFDE700 AFDE710 POWER HP 2.00 2.95 THRUST N 2670 2670 STROKE mm 127 127 WEIGHT kg 63 63 5 Tapping Electric Drive -- AFDE tappers l Comprehensive range of tapping tools l Tapping gearboxes feature push-pull drive which automatically reverses when the tool returns (except AFDE700) l Capacity up to 22mm (3/4") in aluminium, 16mm (5/8") in mild steel tapping electric drive with pneumatic feed push-pull TOOL TYPE SPEED POWER TORQUE STROKE WEIGHT rpm HP Nm mm kg AFDE200 AFDE400/410 AFDE600/610 AFDE200-850 850 0.34 2.4 90 11.1 AFDE200-1200 1200 0.34 1.8 90 11.1 AFDE400-330 330 0.44 8.6 100 12.8 AFDE400-550 550 0.44 5.2 100 12.8 AFDE400-900 900 0.44 3.2 100 12.8 AFDE400-1200 1200 0.44 2.4 100 12.8 AFDE410-330 330 1.00 19.6 100 13.8 AFDE410-550 550 1.00 11.8 100 13.8 AFDE410-900 900 1.00 7.2 100 13.8 AFDE410-1200 1200 1.00 5.4 100 13.8 AFDE600-330 330 0.44 8.6 100 20.1 AFDE600-550 550 0.44 5.2 100 20.1 AFDE600-900 900 0.44 3.2 100 20.1 AFDE600-1200 1200 0.44 2.4 100 20.1 AFDE610-330 330 1.00 19.6 100 21.1 AFDE610-550 550 1.00 11.8 100 21.1 AFDE610-900 900 1.00 7.2 100 21.1 AFDE610-1200 1200 1.00 5.4 100 21.1 AFDE700-140 140 2.00 92 127 63 AFDE700-280 280 2.00 46 127 63 AFDE700-460 460 2.00 28 127 63 AFDE700-950 950 2.00 13.6 127 63 The following tools require suitable output spindles to fit a tapping head: TOOL TYPE AFDE200 AFDE600 AFDE610 OUTPUT SPINDLE K32 B24 B24 How to order Examples: AFDE200 - 850 - A1 + K32 + 357193(H21) AFDE400 - 550 - A1 + B7 AFDE610 - 900 - A1 + B24 + 383813(J19) Tapping Pneumatic Drive -- AFDE / AFT tappers l Compact tapping units l Tapping gearboxes feature push-pull drive which automatically reverses when the tool returns l Capacity up to 12mm (1/2") in aluminium, 8mm (5/16") in mild steel tapping pneumatic drive and feed push-pull TOOL TYPE SPEED POWER TORQUE STROKE WEIGHT AFD205/215 rpm HP AFD205-650 650 0.30 AFD205-1000 1000 0.30 AFD215-650 650 0.30 AFD215-1000 1000 0.30 AFD415-490 490 0.51 AFD415-790 790 0.51 AFD415-1250 1250 0.51 AFT60-550 550 0.70 AFT60-700 700 0.70 AFT60 Nm mm kg 4.3 50 4.5 2.8 50 4.5 4.3 90 4.8 2.8 90 4.8 9.9 100 6.6 6.1 100 6.6 3.9 100 6.6 12.1 95 11.9 9.5 95 11.9 The following tools require suitable output spindles to fit a tapping head: TOOL TYPE OUTPUT SPINDLE AFD415 6 AFD205 K32 AFD215 K32 How to order Examples: AFD205 - 650 - A1 + K32 + 357193(H21) AFD215 - 1000 - A6 + K32 + 357193(H21) AFD415 - 790 - A1 + B7 AFT60 - 700 Tapping Leadscrew AFTE270 leadscrew l Light duty high speed leadscrew tappers l Features 0.18kW (0.24HP) brake motor TOOL TYPE SPEED POWER TORQUE STROKE WEIGHT l Supplied fitted with proximity switches for depth, rpm HP Nm datum and `no hole' sensing, PNP or NPN AFTE270-1100 1100 0.24 1.4 AFTE270-1300 1300 0.24 1.1 l Quick release interchangeable leadscrew and nut AFTE270-1850 1850 0.24 0.9 mm kg 60 12 60 12 60 12 assembly AFTE270-2350 2350 0.24 0.7 60 12 l Capacity up to 6mm (1/4") in aluminium, 3mm (1/8") in AFTE270-2950 2950 0.24 0.6 60 12 mild steel depending on thread form leadscrew / nut assemblies AFTE270 SHAPE REPLACEMENT ORDERING THREAD SIZE/ REPLACEMENT ORDERING THREAD SIZE/ LEADSCREW/ CODE PITCH LEADSCREW/ CODE PITCH NUT ONLY NUT ONLY part no. part no. Proximity Sensor 380373 369933 369923 359303 359293 350713 350723 350733 350743 350753 350763 L34 0.25 L33 0.30 L32 0.35 L31 0.40 L30 0.45 L1 0.50 L2 0.60 L3 0.70 L4 0.75 L5 0.80 L6 1.00 350993 350923 350933 350943 350953 350963 350973 350983 L22 1/8" NPT(27 TPI) L23 0 BA L24 1 BA L25 2 BA L26 3 BA L27 4 BA L28 5 BA L29 6 BA Quick release Leadscrew and Nut Assembly Leadscrew Nut Leadscrew 402723 391533 391543 390333 350803 350813 350823 350833 350843 350853 L38 80 TPI L36 64 TPI L37 56 TPI L35 48 TPI L10 40 TPI L11 36 TPI L12 32 TPI L13 28 TPI L14 26 TPI L15 24 TPI Proximity switches included with tool. Control Blocks A7 PNP Switches A8 NPN Switches AFTE470 / AFTE480 leadscrew l High power brake motors with options of 0.38kW AFTE470 (0.50HP) or 0.75kW (1.00HP) AFTE470-180 180 0.50 17.9 l Supplied fitted with proximity switches for depth, AFTE470-330 330 0.50 9.8 datum and `no hole' sensing, PNP or NPN AFTE470-550 550 0.50 5.9 l Quick release interchangeable leadscrew and nut AFTE470-900 900 0.50 3.6 assembly AFTE470-1200 1200 0.50 2.7 AFTE470-1450 1450 0.50 2.2 l Capacity up to 10mm (3/8") in mild steel, 16mm (5/8") in aluminium depending on thread form AFTE480 AFTE480-180 180 1.00 35.8 AFTE480-330 330 1.00 19.5 AFTE480-550 550 1.00 11.7 AFTE480-900 900 1.00 7.2 AFTE480-1200 1200 1.00 5.4 AFTE480-1450 1450 1.00 4.4 leadscrew / nut assemblies AFTE470 / 480 SHAPE REPLACEMENT ORDERING THREAD SIZE/ LEADSCREW/ CODE PITCH NUT ONLY part no. Proximity Sensor Quick release Leadscrew and Nut Assembly Leadscrew Nut Leadscrew 380373 369933 369923 359303 359293 350713 350723 350733 350743 350753 350763 350773 350783 350793 402723 391533 391543 390333 350803 350813 L34 0.25 L33 0.30 L32 0.35 L31 0.40 L30 0.45 L1 0.50 L2 0.60 L3 0.70 L4 0.75 L5 0.80 L6 1.00 L7 1.25 L8 1.50 L9 1.75 L38 80 TPI L36 64 TPI L37 56 TPI L35 48 TPI L10 40 TPI L11 36 TPI 60 25 60 25 60 25 60 25 60 25 60 25 60 26.5 60 26.5 60 26.5 60 26.5 60 26.5 60 26.5 REPLACEMENT LEADSCREW/ NUT ONLY part no. 350823 350833 350843 350853 350863 350873 350883 350893 350903 350913 402793 ORDERING THREAD SIZE/ CODE PITCH L12 32 TPI L13 28 TPI L14 26 TPI L15 24 TPI L16 22 TPI L17 20 TPI L18 19 TPI L19 18 TPI L20 16 TPI L21 14 TPI L39 12 TPI 350993 L22 1/8" NPT(27 TPI) 350923 350933 350943 350953 350963 350973 350983 L23 0 BA L24 1 BA L25 2 BA L26 3 BA L27 4 BA L28 5 BA L29 6 BA Control Blocks : A7 PNP Switches, A8 NPN Switches 7 Control Blocks and Interfaces Control Blocks A1 Full Feature Control Block Part No. 436313 A6 Simple Control Block Part No. 103862 Air Connections R Air Return Port Connects to breather port in nose of tool to provide extra retract capability with heavy front end attachments (1/8" BSP) ST Start Button For manual operation and set-up 1 Remote Start Signal Port Pulse (M5) SP Manual Stop Button Interrupts cycle and returns AFD to datum P Remote Stop Signal Port Requires external signal pulse for returning the unit to datum rest position (M5) O Air inlet (1/4" BSP or 1/4" NPT) M Work Cycle Complete Port Used for sequence control with other AFD's clamps, index tables, etc (positive at datum position) (M5) O Depth Stop Signal Port Used with external circuits such as dwell or pecking (1/8" BSP) Retract rate adjustment control Advance rate adjustment control Feed rate adjustment control F Feed port (1/8" BSP) RN Return port (1/8" BSP) Electrical Interfaces (not included with control blocks) Electrical Connections S1 Start solenoid S2 Stop solenoid SW1 Datum return (M8 x 1.00) SW2 Depth position (M8 x 1.00) C10 Part No. 438223 Comprises : 2 x M8 Proximity Switches PNP (NO) 2 x Plug-in Cables 2 x Solenoid Valves (NC) C11 Part No. 438233 Comprises : 2 x M8 Proximity Switches PNP (NO) 2 x Plug-in Cables 1 x Solenoid Valve (NC) 1 x Solenoid Valve (NO) C3 Part No. 104002 Comprises : 2 x M8 Proximity Switches PNP (NO) 2 x Plug-in Cables C5 Part No. 104842 Comprises : 2 x M8 Proximity Switches NPN (NO) 2 x Plug-in Cables Solenoid Valves ALL 24V DC NC Valve normally closed NO Valve normally open Proximity Switches All 10-30V DC NC Normally closed NO Normally open C12 Part No. 438243 Comprises : 2 x M8 Proximity Switches NPN (NO) 2 x Plug-in Cables 2 x Solenoid Valve (NC) AFD60 / AFT60 Control Block (Supplied fitted) Air connection as above except M port which is negative at datum. To invert signal use kit Part No. 104822 Electrical Inputs and Outputs 24VD.C. Switched Red OV. Common Black 24VD.C. Switched Green Switch Yellow Switch Common White Switch Blue Electrical Interface Part No. 79532 24V DC Comprises: 2 metre cable Adaptor and O ring Interface block 8 AFD Control Options Output Spindles adjustable feed control unit Minimises burring on breakthrough. Constant feed maintained in all operating conditions. Hydraulic fluid sealed for life. MIN. PLUNGER MAX. LOAD MINIMUM FEED RATE MAX. STROKE A OPERATING LOAD AT 2230N (500LBS) LOAD kg kg mm mm mm D1 2.3 D2 2.3 D3 2.3 D7 4.1 D8 4.1 544 0.73 544 0.73 544 0.73 357 0.45 357 0.45 25 199 50 276 75 352 102 417 127 474 peck feed control B PART NO. mm 30.1 91942 55.5 91952 80.9 91962 106 104452 132 104462 Used when hole depth is five times hole diameter. Helps clear chips, avoids overheating and bit breakage. Hole accuracy is improved. For use with Full Feature Control Block. D4 25mm (1") stroke D5 50mm (2") stroke D6 75mm (3") stroke dwell control 92282 92292 92302 Used to dwell drill at bottom of stroke. Can be used to spot face, blind hole polish, friction weld plastic components and spin rivet. For use with Full Feature Control Block. E1 Dwell Control Unit Complete -- Dwell for AFD60 92372 78482 skip feed control Skip Drilling custom H.C.U.'s available on request. Skip control ensures minimum cycle times without breakthrough burrs when drilling tubes, pocketed castings etc, with two controlled feed movements linked by a distance of fast travel. Information Required 1. Depth of first cut 2. Depth of skip 3. Depth of second cut 4. Drill point anlge AFD205 / AFD215, AFDE200, AFTE270 l Interchangeable modular output spindles l Precision option for collet types, R2 and R36 FUNCTION ORDER FEATURES CODE High Speed Output K42 Spindle Collect Chuck can be fitted to any AFDE200 to step up speed by 4.28 : 1. Note: Max allowable speed 27000 rpm. PART NO. 375263 RECOMMENDED SPEED RANGE <5250 rpm 25.5mm (1") Collect Chuck K2 See range of collets. No. 1 Jacobs Taper K32 Output Spindle No. 1 Jacobs Taper and for use with chucks or. multi spindle heads 357183 382213 <18800 rpm <9600 rpm Tapping Head Output Spindle H21 4.5-8.0MM (3/16"-5/16") capacity. 357193 <1200 rpm 9 Output Spindles 10 AFD415, AFDE400 / 410, AFDE600 / 610 / 620, AFTE470 / 480 FUNCTION ORDER FEATURES CODE PART NO. RECOMMENDED SPEED RANGE 10mm (3/8") key Adjustable Chuck B1 Output Spindle Part No. Includes chuck key 327723 <9600 Integral Collet Chuck Output Spindle B2 R2 Up to 7mm (0.276") collet capacity(See Collet Range) Standard Output Assembly Precision Output Assembly 326573 384113 <1800 Large Integral Collet Chuck Output Spindle R36 Up to16mm (0.63") collet capacity(See Collet Range) Precision Output Assembly 389273 <1800 Taper Output Spindle B24 and for use with chucks and multi B32 spindle heads B16 Preset Tooling DIN55058 Output Spindle B3 Preset Tooling TMS Standard Output Spindle B33 AFD415, AFDE400 Externally Adjustable B5 Screwdriver Head Output Spindle B6 AFD415, AFDE400 B7 410 Tapping Head Output Spindle B8 No.2 Jacobs Taper No.1 Jacobs Taper B16 Taper Output A = 30 (1.18") A = 24.1 (0.95") A = 34.8 (1.37") ØA ØB C D mm mm mm mm 16 25 74 79 Standard Output Assembly ØA ØB C D ins ins ins ins 5/8" 1 2.62 2.85 Standard Output Assembly 1/4" fem. hex. drive. Torque range 0.3 - 11 Nm (2.7 - 100 ins. lbs.) 5/16" fem. hex. drive. Torque range 0.3 - 11 Nm (2.7 - 100 ins. lbs.) 3.5 - 6.5mm (9/64" - 1/4") capacity 4.5 - 8mm (3/16" - 5/16") capacity 326593 355263 368163 <9600 326563 <5450 356373 324903 324913 <5450 <2100 92362 92892 <1450 AFDE600 / 610 Tapping Head J19 4.5 - 9.5mm (3/16" - 3/8") capacity Output Spindle For use with B24 output 383813 <1450 AFDE700 / 710 FUNCTION ORDER CODE DESCRIPTION Standard machine taper. Adapts to numerous standard machining T34 heads and equipment. ISO30 output taper, DIN 2080 Tooling spindles for `automotive' preset tooling. T3 Preset tooling spindle to DIN 55O58 Accepts tooling to DIN 6327 28m diameter, 85mm (3.25") deep PART NO. 362443 362453 Tooling spindles for `automotive' preset T33 tooling. Preset tooling spindle to T.M. Smith standard 1 373333 1 /16" diameter, 3.3"(84mm) deep Accepts straight shank drills up to 20mm diameter (7/8") T2 ER32 collet output spindle (see collets) Maximum drill depth 48mm (1.89") 362463 Drive spindle for use with multi-head or angle head. T35 Drive adaptor for multi-heads or angle head 373343 Collets For use with B2 (326573), R2 (384113), K2 (357183), K42 (375263), ER11 TYPE size part no. size part no. size part no. 0.5 - 1.0 (0.020 - 0.039) 1.1 - 1.5 (0.043 - 0.059) 1.6 - 2.0 (0.063 - 0.079) 6.0 - 7.0 (0.236 - 0.276) 7.1 - 8.0 (0.279 - 0.315) 8.1 - 9.0 (0.319 - 0.354) 9.1 - 10.0 (0.358 - 0.394) 5.0 - 6.0 (0.197 - 0.236) 6.1 - 7.0 (0.240 - 0.276) 7.1 - 8.0 (0.279 - 0.315) 8.1 - 9.0 (0.319 - 0.354) 9.1 - 10.0 (0.358 - 0.394) Chucks 52582 52592 52602 104942 104952 104962 104972 105092 105102 105122 105132 105142 2.1 - 2.5 (0.083 - 0.098) 2.6 - 3.0 (0.102 - 0.118) 3.1 - 4.0 (0.121 - 0.157) 52622 52632 52642 4.1 - 5.0 (0.161 - 0.197) 5.1 - 6.0 (0.201 - 0.234) 6.1 - 7.0 (0.240 - 0.276) For use with R36 (389273) ER25 TYPE 10.1 - 11.0 (0.397 - 0.433) 11.1 - 12.0 (0.437 - 0.472) 12.1 - 13.0 (0.476 - 0.512) 13.1 - 14.0 (0.516 - 0.551) 104982 104992 105002 105022 14.1 - 15.0 (0.555 - 0.591) 15.1 - 16.0 (0.594 - 0.630) For use with T2 (362463) ER32 TYPE 10.1 - 11.0 (0.397 - 0.423) 11.1 - 12.0 (0.437 - 0.472) 12.1 - 13.0 (0.476 - 0.512) 13.1 - 14.0 (0.516 - 0.551) 14.1 - 15.0 (0.555 - 0.591) 105152 105162 105172 105182 105192 15.1 - 16.0 (0.594 - 0.630) 16.1 - 17.0 (0.634 - 0.669) 17.1 - 18.0 (0.673 - 0.709) 18.1 - 19.0 (0.713 - 0.748) 19.1 - 20.0 (0.752 - 0.787) 52652 52662 52672 105032 105042 105202 105222 105232 105242 105252 drilling chucks FUNCTION DESCRIPTION PART NO. 6.5mm (1/4") Key Adjustable Chuck Part No. Includes Chuck Key. Use with No. 1 standard Jacobs taper outputs K32 and B32 29492 10mm (3/8") Key Adjustable Chuck Part No. Includes Chuck Key. Use with No. 2 standard Jacobs taper output B24 34752 13mm (1/2") Key Adjustable Chuck Part No. Includes Chuck Key. Use with No. 2 standard Jacobs taper output B24 34332 tapping chucks Tapping Chucks with flexible Collet (included) Spare or replacement Collets drill bit/ cutter adaptor JACOBS TAPER FITTING A B Ø TAP SHANK mm mm mm No. 1 64 27 3.5-6.5 No. 1 64 27 4.5-8 No. 2 79 37 4.5-9.5 2-4.5mm (5/64-3/16") Capacity to suit 29462 / 29452 3.5-6.5mm (9/64-1/4") Capacity to suit 29462 / 29452 4.5-8mm (3/16-5/16") Capacity to suit 29462 / 29452 4.5-9.5mm (3/16-3/8") Capacity to suit 34742 9-12.5mm (9/32-1/2") Capacity to suit 34742 29462 29452 34742 75142 29482 29472 36172 39242 Morse Taper Adaptor No. 2 Jacobs female taper to No. 2 Morse female taper 34862 Multi-spindle drilling / tapping heads Angle heads/ Offset heads Ø 10mm Shank Cutter Adaptor multiple spindle heads Fits thread of Single Collet Chuck Part Nos. 326573 and 384113 and Multi Heads Part Nos. 52362, 53232 52462, 92162, 92172, 104022, 104062 Fixed and adjustable spindle multi-heads When ordering state number of spindles, diameter of -- holes, material to be drilled and hole pattern required Angle heads available to order to suit When ordering state details of application, material to -- AFDE400/410/600/610/620/700/710/AFD4115 be machined, size and depth to cut 11 Guards Silencers Miscellaneous Accessories Multiple Spindle Heads How to order Examples: AFDE200-2850-A1 + K32 + 174183 AFD415-3400-A6 + B24 + 107552 AFDE610-900-A1 + B24 + 107672 AFD60-2100 + 52362 AFDE70-950-A1-T35 + MSD300 12 chuck guards FEATURES TOOL TYPES To prevent the user inadvertently touching rotating parts AFD205/215, AFDE200, AFTE270 AFD415, AFDE400/410, AFTE470/480 AFD60/AFDE600/610/620 control head guard Control Top Guard to enclose crosshead (Supplied with AFD60 as standard) A B C D 210mm (8.3") 236mm (9.3") 108mm (4.3") 55mm (2.2") AFD60, AFT60 AFD/AFT silencer Exhaust silencer fitted with 1/4" BSP screw-in silencer AFD205, AFD215 AFD415 AFD60, AFT60 PART NO. 66132 66122 304863 259093 91262 70642 70652 AFD205/215 HCU inverting kit HCU Inverting Assembly Particularly for use with AFD205 for applications with height restrictions 381003 AFD205/215, AFDE200, AFTE270 sealing ring Sealing Ring Threaded on to nose of unit in place of protection cap. Forms seal on quill shaft to prevent ingress of swarf. 104432 l Range of adjustable spindle positions for 2, 3 and 4 spindle heads l Special fixed spindle heads available for non standard hole patterns or dedicated applications drilling Multiple Spindle Head Part Numbers NUMBER SPINDLE MAXIMUM AFD205 AFD415 AFD60 AFDE600 AFDE700 AFTE270 AFTE-470 COLLET OF CENTERS COLLET AFD215 AFDE400 AFDE610 AFDE710 AFTE-480 TYPE SPINDLES OR PCD SIZE AFDE200 AFDE410 AFDE620 2 9.5-54 4.00 174183 92142 A 2 12.7-64 6.50 92152 B 2 18.4-87.3 7.00 92162 52362 104062 C 2 19-95 9.50 106662 204183 106672 D 2 41.1-109.9 7.00 92172 52462 104022 C 3 inline 19.0-57.1 9.50 107552 107572 107562 D 3 PCD 27.9-104.1 9.50 107582 107602 107592 D 4 PCD 42.7-118.9 9.50 107622 107612 D Fixed MSD100 MSD200 MSD200 MSD300 tapping 2 9.5-54 4.00 174183 92142 A 2 12.7-64 6.50 204173 92222 92152 B 2 18.4-87.3 7.00 92232 104122 92162 C 2 19-95 9.50 106682 204193 106692 106662 D 2 41.1-109.9 7.00 92242 104072 92172 C 3 inline 19.0-57.1 9.50 107632 107652 107642 107552 D 3 PCD 27.9-104.1 9.50 107662 107682 107672 107582 D 4 PCD 42.7-118.9 9.50 107702 107692 D Fixed MST100 MST200 MST200 MSD300 MSD100 output spindles for use with multiple spindle heads AFD205 AFD215 AFDE200 K32 AFD415 AFDE400 AFDE410 B24 AFD60 AFDE600 AFDE610 AFDE620 B24 AFDE700 AFDE710 T35 AFTE270 K32 AFTE-470 AFTE-480 B24 Multiple Spindle Heads dimensions QUILL DATUM QUILL DATUM Drilling 2 spindles adjustable Tapping 3 spindles inline adjustable 3 spindles adjustable 4 spindles rectangular adjustable 2 3 4 5 spindles fixed adjustable spindle PART NO. MAXIMUM MAX. / MINI. MINIMUM SPEED rpm CENTERS PCD mm mm 52362 8500 52462 8500 92142 5300 92152 5300 92162 8500 92172 8500 92222 1400 92232 1400 92242 1400 104022 8500 104062 8500 104072 1400 104122 1400 106662 5300 106672 5300 106682 1500 106692 1500 107552 5300 107562 5300 107572 5300 107582 5300 107592 5300 107602 5300 107612 5300 107622 5300 107632 900 107642 900 107652 900 107662 900 107672 900 107682 900 107692 900 107702 900 174183 5300 204173 5300 204183 5300 204193 700 18.4-87.3 41.1-109.9 9.5-54 12.7-64 18.4-87.3 41.1-109.9 12.7-64 18.4-87.3 41.1-109.9 41.1-109.9 18.4-87.3 41.1-109.9 18.4-87.3 19-95 19-95 19-95 19-95 19-57.1 19-57.1 19-57.1 27.9 27.9 27.9 42.7 42.7 19-57.1 19-57.1 19-57.1 27.9 27.9 27.9 42.7 42.7 9.5-54 12.7-64 19-95 19-95 fixed spindle MAXIMUM PCD mm 104.1 104.1 104.1 118.9 118.9 104.1 104.1 104.1 118.9 118.9 C mm 62 62 50.8 50.8 62 62 50.8 62 62 62 62 62 62 76 76 76 76 99.2 99.2 99.2 120.3 120.3 120.3 147.6 147.6 99.2 99.2 99.2 120.3 120.3 120.3 147.6 147.6 50.8 50.8 76 76 D mm 115 137 83 83 115 137 83 115 137 137 115 137 115 124 124 124 124 142.9 142.9 142.9 132.6 132.6 132.6 130.4 130.4 142.9 142.9 142.9 132.6 132.6 132.6 130.4 130.4 83 83 124 124 PART NO. MAXIMUM MAX. / MINI. MINIMUM MAXIMUM OE SPEED CENTERS PCD PCD rpm mm mm mm mm F mm 60 60 50.8 50.8 60 60 50.8 60 60 60 60 60 60 68.3 68.3 68.3 68.3 68.3 68.3 68.3 68.3 68.3 68.3 68.3 68.3 68.3 68.3 68.3 68.3 68.3 68.3 68.3 68.3 50.8 50.8 68.3 68.3 F mm MSD100 5300 MST100 1400 MSD200 5300 MST200 700 MSD300 3500 MST300 1500 9.5-63.5 9.5/12.7 63.5 9.5-63.5 9.5/12.7 63.5 19-95 19 95 19-95 19 95 17.4-157 17.4 157 17.4-157 17.4 157 Spindle Coolant Adaptor for the AFDE700 Series 56-81.8 37/40.5 56-81.8 37/40.5 100.8-126.2 57.2 100.8-126.2 57.2 150-225 26-41 150-225 26-41 H mm 193.5 193.5 175.4 175.4 196 196 233.8 253 253 196 196 233.5 196 212 211 261.5 260 212.3 188 212.3 212.3 211.2 188 211.2 188 261.5 260 259.9 261.5 260 259.9 260 259.9 169.5 206.1 188 260.4 H mm 168/175.4 227.8/233.8 211.1 260 221-241 221-241 Two types of spindle coolant adaptors are now available for the AFDE700/710. The adaptors are available with the ER32 style collect holder (maximum collet 20mm) or a 32mm `U' drill holder. Both are supplied with DIN2080 ISO30 male tapers to fit the T34 output and include a support pillar mounted to the front of the AFDE to take the torque reaction. The heads are fully sealed and coolant enters the head via a port on the side of the head suitable for 10mm O.D. and 7mm I.D. pipe. Maximum Speed 5000 rpm Maximum Coolant Pressure 25 bar Weight Approx 7 kg (15.5lbs) ER Collet Type 32mm `U' Drill Type Part No. 107792 Part No. 107802 13 Multiple Spindle Heads Collets l Collects for multiple spindle heads l Types A, B and D are threaded types l Type C are Er11 type SIZE COLLET TYPE A B C SIZE COLLET TYPE D A B C SIZE COLLET TYPE D A B C mm mm mm 0.5 52582 4.1 0.6 52582 4.2 0.7 52582 4.3 0.8 52582 4.4 0.9 52582 4.5 1 60002 39442 52582 4.6 1.1 60022 39452 52592 4.7 1.2 60032 39462 52592 4.8 1.3 60042 39472 52592 4.9 1.4 60052 39482 52592 5 1.5 60062 39492 52592 5.1 1.6 60072 27852 52602 5.2 1.7 60082 39502 52602 5.3 1.8 60092 27862 52602 5.4 1.9 60102 39522 52602 5.5 2 60122 27872 52602 39302 5.6 2.1 60132 27882 52622 39322 5.7 2.2 60142 27892 52622 39322 5.8 2.3 60152 27902 52622 39342 5.9 2.4 60162 27922 52622 39352 6 2.5 60172 27932 52622 39362 6.1 2.6 60182 27942 52632 39372 6.2 2.7 60192 27952 52632 39382 6.3 2.8 60202 27962 52632 39392 6.4 2.9 60222 27972 52632 39402 6.5 3 60232 27982 52632 39422 6.6 3.1 60242 27992 52642 39432 6.7 3.2 60252 28002 52642 34902 6.8 3.3 60262 28032 52642 34932 6.9 3.4 60272 28042 52642 34942 7 3.5 60282 28052 52642 34952 3.6 60292 28062 52642 34962 3.7 60302 28082 52642 34982 3.8 60322 28092 52642 34992 3.9 60332 28102 52642 35002 4 60342 28122 52642 35022 28132 28142 28152 28162 28172 28182 28192 28202 28222 28232 28252 28272 28282 28292 28302 28322 28332 28342 28352 28372 28382 28392 28402 39532 39542 52652 52652 52652 52652 52652 52652 52652 52652 52652 52652 52662 52662 52662 52662 52662 52662 52662 52662 52662 52662 52672 52672 52672 52672 52672 52672 52672 52672 52672 52672 35032 7.1 35042 7.2 35052 7.3 35062 7.4 35072 7.5 35082 7.6 35092 7.7 35102 7.8 35122 7.9 35132 8 35152 8.1 35172 8.2 35182 8.3 35192 8.4 35202 8.5 35222 8.6 35232 8.7 35242 8.8 35252 8.9 35272 9 35282 9.1 35292 9.2 35302 9.3 35332 9.4 35342 9.5 35352 35362 35382 35392 35402 Applications D 35422 35432 35452 35462 35472 35492 35502 35522 35532 35552 35562 35572 35582 35592 35602 35622 35632 35652 35672 35682 35692 35722 35732 35752 35762 14 Auto Feed Drill and Tapper Applications Application ! Hydraulic cylinder ! Drilling and tapping Ø6mm holes in alloy steel Tool Type ! 4 AFD41-1250-A1-B2 with skip feed control unit ! 1 AFTE47-830-A6-B24 with tapping chuck and control box ! 1 R12104X 4 station rotary table ! Parallel and base clamps, tubes Application ! Carburettor components ! Drilling 2 Ø3mm and a Ø10mm hole in aluminium casting Tool Type ! 2 AFD22-4350-A1-K2 with hydraulic control units ! 1 AFD60-1600 ! Base and bar clamps ! 1 R12104H 4 station rotary table with hydrocheck Cycle Time ! 20 seconds Cycle Time ! 5 seconds per component Application ! Aluminium casting ! Drilling and tapping Ø8mm holes Tool Type ! 2 AFD41-3400-A6-B2 ! 2 AFD41-790-A6-B8 ! All tools fitted with interface kits and exhaust collectors ! Mounted on bar clamps to vertical slides for positioning Cycle Time ! Under 20 seconds Application ! Automotive component ! Drilling Ø6.4mm hole, 32mm deep and 4 Ø5.5mm holes in mild steel Tool Type ! AFD60-3000 fitted with 2 spindle head and hydraulic check unit ! AFD41-2100-A1-B1 fitted with 50mm peck feed kit ! 2 AFD22-2700-A1-K32 with chucks and hydraulic check units ! Mounted on swivel and right angle clamps, base clamps and tubes Cycle Time ! 12 seconds Application ! Air conditioning parts ! Drilling 2 Ø6mm holes and spot facing 6 Ø16mm holes 1.5mm deep in cast aluminium replacing operations performed by a CNC machine Tool Type ! 2 AFDE41-2350-A1-B2 fitted with interface kits and hydraulic check units ! AFE70-460-A1-T35 fitted with a 6 spindle head and dwell kit ! AFDE41 in bar, swivel, right angle and base clamps and tube Cycle Time ! 8 -9 seconds Application ! Stainless steel component ! Drilling Ø4mm and Ø8mm holes Tool Type ! AFDE41-1220-A1-B1 fitted with 25mm hydraulic check units ! AFDE62-860-A1-B1 fitted with 25mm hydraulic check unit ! Both tools mounted in swivel, right angle and base clamps with tubes Cycle Time ! 8 seconds 15 Mounting Clamps Used with AFD type AFD205, AFDE200, AFTE270 AFD415, AFDE400/410, AFTE470/480 AFD60, AFT60, AFDE600/610/620 Base Clamp Part No. 61842 76302 32542 Swivel clamp Part No. 61802 76332 32502 Right Angle Clamp Part No. 61822 76342 32522 Used with AFD type AFD205, AFDE200, AFTE270 AFD415, AFDE400/410, AFTE470/480 AFD60, AFT60, AFDE600/610/620 Mounting Columns Bar Clamp Part No. 61852 76272 32532 Used with AFD type 228mm 305mm AFD205, AFDE200, AFTE270 39702 AFD415, AFDE400/410, AFTE470/480 9452 AFD60, AFT60, AFDE600/610/620 -- 39722 9462 -- Parallel clamp Part No. 61832 76352 32492 457mm Column Length 610mm 760mm Part No. 39732 39742 39752 9472 9482 -- -- 32562 -- Pillar Support Part No. 61862 -- -- 915mm 1220mm -- -- 32572 -- -- 32582 Chicago Pneumatic Sales, A Division of Atlas Copco (India) Ltd. Chemtex House, Hiranandani Gardens, Powai, Mumbai-400 076. Websites : www.chicagopneumatic.com MUMBAI : 2570 89 94, 2570 89 11 DELHI : 5161 50 91, 2638 69 32 KOLKATA : 2226 15 76, 2246 98 53 CHENNAI : 2483 55 11, 2483 55 09 PUNE : 2543 21 05 JSB-05-03Corel PDF Engine Version 11.633 CorelDRAW Version 11.0