Samsung HG40NC678 / HG48NC678 LED TV Quick Setup Guide
To register this product, please visit www.samsung.com/register.
List of Parts
- Remote Control (AA59-00817A) & Batteries (AAA x 2)
- Power Cord
- Owner’s Instructions
- Safety Guide
- Holder-Wire stand (1 EA)
- Hotel Mount Kit
- Sound Bar
Samsung Sound-Bars and Hospitality TVs in 2014
Samsung Sound-Bars and hospitality TVs support the ARC feature in HDMI 1.4. Connecting a compatible Samsung Sound-Bar to a compatible Samsung hospitality TV using a single HDMI cable allows guests to listen to the TV’s sound through the Sound-Bar.
The 'Sound bar Out' option in the Hospitality Option Menu controls TV sound output when the TV is turned on. If 'Sound bar Out' is On, the TV sound is automatically outputted to the Sound Bar device. If 'Sound bar Out' is Off, the TV sound is automatically outputted to the TV speaker.
Models supporting the ARC function include: Sound-Bars: HW-E350/E450/E550, HW-F350/F355/FM35/F450/FM45/FM45C/ F550/F551/FM55/FM55C/F750/F751.
Setting the Sound-Bar to Hotel Mode
Set the following Hotel menu options:
- Hotel option > System > Sound Bar Out = On.
- Hotel option > Power On > Power On Volume = User Defined.
- Hotel option > Power On > Power On Volume Num > Set greater than 0.
- Hotel option > Power On > Max Volume > Set greater than 0.
Connect an HDMI cable from the HDMI OUT jack at the back of the Sound-Bar to the HDMI3 port (supporting ARC) on the hospitality TV.
After the Sound-Bar is connected to the hospitality TV, when the TV turns on, the Sound-Bar automatically detects the TV and switches to Hotel Mode.
Sound Bar Hotel mode functional characteristics:
- Power On/Off is synchronized with the TV.
- HDMI_CEC defaults to On.
- Functions through the “HDMI OUT” port only.
- Disables the “Input mode” key on the VFD to prevent unexpected audio-source changes.
- Acquires adjustable Power On and Max Volume settings from the TV’s Hotel option menu. The Sound-Bar’s Power On Volume and Max Volume values are ½ of the TV’s Hotel options menu settings. (Example: If TV’s Power On Volume=20 and Max Volume=90, then Sound Bar’s Power On Volume=10 and Max Volume=45.)
Viewing the Connection Panel
The product color and shape may vary depending on the model.
- HDMI IN 1, 2(DVI), 3(ARC)
- USB (5V 0.5A) / CLONING
- VIDEO / L-AUDIO-R
- EX-LINK
- AUDIO OUT
- ANT IN (AIR/CABLE)
- GAME CONTROL DATA
Using the TV’s Controller
The TV’s Controller, a joystick-like button on the rear right side of the TV, allows control without the remote.
Note: The product color and shape may vary depending on the model.
- To exit the menu, press the Controller for more than 1 second.
- When selecting a function by moving the controller, do not press up on the controller. Pressing up first will prevent correct operation.
Standby mode
Your TV enters Standby mode when turned off and continues to consume a small amount of power. For safety and to decrease power consumption, do not leave the TV in standby mode for extended periods (e.g., during vacations). It is best to unplug the power cord.
Installing the LED TV Stand
HG40NC678 / HG48NC678
Components
- Stand (differs, depending on the model)
- Guide Stand
- Screws (M4 X L12)
- Security Screws (4EA, for 40” and above models)
Installation Steps:
- Place a soft cloth over the table to protect the TV, and then place the TV on the cloth screen-side down.
- Insert the Stand Guide into the slot on the bottom of the TV.
- Connect the Stand to the TV using the screws. Ensure correct orientation of the stand and guide.
- At least two people should lift and move the LED TV.
- When connecting the stand, lay the product on a soft surface with the screen facing down, and then fasten the screws. The number of screws may differ depending on the model.
Assembling the swivel
The 40” and larger LED TVs have swivel stands. You can set these stands to swivel 20, 60, or 90 degrees left and right.
- 20° swivel: Insert the prong on the bottom of the stand through the curved hole in the Bracket Holder Swivel marked 20°. Fix the Bracket Holder Swivel to the stand using three supplied screws.
- 60° swivel: Insert the prong on the bottom of the stand through the curved hole in the Bracket Holder Swivel marked 60°. Fix the Bracket Holder Swivel to the stand using three supplied screws.
- 90° swivel: Remove the Bracket Holder Swivel, and then screw the three supplied screws into the stand.
Hotel Mount Kit
WARNING: To prevent injury, securely attach the TV to the floor, a table, a dresser top, etc., with the Hotel Mount Kit as described in these instructions.
Affix the stand to a flat surface such as a dresser top, desk top, or entertainment center as shown.
Wall Mount Kit Specifications (VESA)
Install your wall mount on a solid wall perpendicular to the floor. For materials other than plasterboard, contact your nearest dealer. Mounting on a ceiling or slanted wall may cause the TV to fall and result in severe personal injury.
Standard dimensions for wall mount kits are shown in the table below. Samsung wall mount kits include a detailed installation manual.
Important Notes:
- Do not use screws that do not comply with VESA standard screw specifications or are too long, as this may damage the TV.
- Do not fasten screws too firmly to avoid product damage or falling, leading to personal injury. Samsung is not liable for such accidents.
- Samsung is not liable for product damage or personal injury from using non-VESA or non-specified wall mounts, or if installation instructions are not followed.
- Do not mount the TV at more than a 15-degree tilt.
- Always have two people mount the TV onto a wall.
- Do not install the wall mount kit while the TV is on to prevent electric shock.
| Product Family | TV size in inches | VESA screw hole specs (A * B) in millimeters | Standard Screw (Length* Pitch in mm) | Quantity |
|---|---|---|---|---|
| LED-TV | 40 | 200 X 200 | M8 | 4 |
| LED-TV | 48 | 400 X 400 | M8 | 4 |
Specifications
Environmental Considerations
- Operating Temperature: 50°F to 104°F (10°C to 40°C)
- Operating Humidity: 10% to 80%, non-condensing
- Storage Temperature: -4°F to 113°F (-20°C to 45°C)
- Storage Humidity: 5% to 95%, non-condensing
Model Name: HG40NC678 / HG48NC678
- Display Resolution: 1920 x 1080
- Screen Size (Diagonal): 40" Class (40.0" measured diagonally) / 48" Class (47.6" measured diagonally)
- Sound (Output): 10W x 2
- Dimensions (WxDxH):
- Body: 35.7 x 21.0 x 2.6 inches (906.6 x 532.9 x 65.1 mm) / 42.3 x 24.7 x 2.6 inches (1075.1 x 627.5 x 65.5 mm)
- With stand: 35.7 x 22.7 x 8.9 inches (906.6 x 577.6 x 226.5 mm) / 42.3 x 26.5 x 8.9 inches (1075.1 x 673.5 x 226.5 mm)
- Weight:
- Without Stand: 16.8lbs (7.6kg) / 24.0lbs (10.9kg)
- With Stand: 23.1lbs (10.5kg) / 30.6lbs (13.9kg)
- Stand Swivel (Left / Right): 20° / 60° / 90°
Note: Design and specifications are subject to change without prior notice. This device is a Class B digital apparatus.
WARNING: This product contains chemicals known to the State of California to cause cancer and reproductive toxicity.
Dimensions
HG40NC678 / HG48NC678
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
|---|---|---|---|---|---|---|---|
| HG40NC678 | 35.7 | 34.9 | 19.7 | 21 | 22.7 | 8.9 | 2.6 |
| HG48NC678 | 42.3 | 41.6 | 23.4 | 24.7 | 26.5 | 8.9 | 2.6 |
(unit: inches)
Connecting the TV with an SBB or STB
Steps:
- Connect the Lodgenet game controller to the [GAME CONTROLLER/DATA] jack of the TV.
- Connect the [DATA] jack of the TV to the [ETH MODEM] jack of the STB (SBB) with the data cable.
Note: The “ETH MODEM” jack name may differ depending on the SBB or STB type.
| Vendor | Cable code |
|---|---|
| OCC | BN39-00865B |
| NXTV | BN39-01011B |
| nStreams | BN39-01110A |
| MTI | BN39-01110C |
Licence Information
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
DTS, the DTS Symbol, and DTS and the DTS Symbol together are registered trademarks & DTS Premium Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.
DTS, the DTS Symbol, and DTS and the DTS Symbol together are registered trademarks & DTS Studio Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that has passed rigorous testing to verify that it plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274
Open Source License Notice
In the case of using open source software, Open Source Licenses are available on the product menu. Open Source License Notice is written only in English.
