The Eaton Reconditioned Offer

Reconditioned products have a low ecological footprint, preserve resources, and significantly reduce environmental impacts, particularly CO₂ emissions. Discover our range of reconditioned products in our French workshops. With the same quality standards as for new product manufacturing, Eaton has developed its own reconditioning processes to preserve the initial product certification. Eaton reconditioned products allow you to sustain and reduce the environmental impact of your installations. This is done in full compliance with standards and with the peace of mind and guarantee that only the manufacturer can offer.

Image showing a hand holding a globe with green leaves, symbolizing environmental protection.

Image of a safety lighting fixture with a green arrow indicating an escape route.

[NF certified] [PERFORMANCE SATI] [BBC] [SATI] [IP42] [IP66] [IK07] [IK10]

UNILED+ 45 C / 45 CES

Reconditioned evacuation luminaire for tertiary / humid areas

Key Features

Reconditioned autonomous luminaire ready to be mounted on an existing bracket/base (supplied without bracket/base).
100% LED luminaire, no relamping, low consumption.
Automatic tests (SATI) ⚙️
Reduced maintenance.
Compact size.
Initial certification preserved: NF EN 60598.2.22 / NFC 71820 / NFC 71800.
Non-polarized remote control inputs, protected against accidental mains connection.
Class II.

Technical Characteristics

Characteristic	Value
Flux	45 lm
Test system	Automatic SATI test ⚙️
Housing	Surface mounting
Mounting type	Polycarbonate
Material	White
Colour	IP42/IK07 - IP66 / IK10
Protection ratings	Automatic terminals for solid and stranded wires. For cross-section from 0.5 to 2.5 mm².
Connection	230V~50/60Hz
Power supply	5°C to 35°C
Ambient temperature range	Ni-Cd
Battery	2 White LEDs
Light source	240 x 80 x 74 mm
Dimensions (product mounted with base or existing bracket)	Waterproof version: 245 x 92 x 80 mm
Class	II
Weight	0.6 kg

Dimensions

UNILED+ 45 C - Dimensions (mm) (product mounted with base or existing bracket):

Diagram showing dimensions for UNILED+ 45 C (product mounted with base or existing bracket): Length 240 mm, Width 80 mm, Height 74 mm, with two oblong holes of Ø 4.2 mm.

UNILED+ 45 CES - Dimensions (mm) (product mounted with base or existing bracket):

Diagram showing dimensions for UNILED+ 45 CES (waterproof version, product mounted with base or existing bracket): Length 245 mm, Width 92 mm, Height 80 mm, with two holes of Ø 5 mm.

Order Codes

Product	Reference	Function	Emergency and standby lamps	Autonomy	Flux (lm)	Battery	Consumption
UNILED+ 45 C Reconditioned Without bracket	LUM16079RS	Evacuation	LED	1 hour	45	3 x 1.2 V / 0.8 Ah	1.2W
UNILED+ 45 CES Reconditioned Without base	LUM16078RS	Evacuation	LED	1 hour	45	3 x 1.2 V / 0.8 Ah	1.2W

Accessories

Product	Reference	Description/Image
Bracket compatible Uniled+ 45 C	LUM11279	[Accessory Icon: Compatible bracket for Uniled+ 45 C]
Base compatible Uniled+ 45 C ES	LUM11278	[Accessory Icon: Compatible base for Uniled+ 45 C ES]
Trim kit	LUM10540	[Accessory Icon: Trim kit]
Recessed mounting frame Ultraled 45	LUM10534	[Accessory Icon: Recessed mounting frame Ultraled 45]
Protective grille	LUM10418	[Accessory Icon: Protective grille]
Battery pack, LifePro 3.2V / 0.6Ah	LUM11139	[Accessory Icon: Battery pack, LifePro 3.2V / 0.6Ah]
Down arrow pictogram	LUM10401	[Accessory Icon: Down arrow pictogram] ⬇️
Right arrow pictogram	LUM10403	[Accessory Icon: Right arrow pictogram] ➡️
Left arrow pictogram	LUM10404	[Accessory Icon: Left arrow pictogram] ⬅️

	ULTRALED 8 / 8 ES: Bloc Habitation Reconditionné Non-Étanche et Étanche Fiche technique Eaton ULTRALED 8 / 8 ES, bloc autonome d'éclairage de sécurité reconditionné, non-étanche et étanche. Caractéristiques techniques, points forts et accessoires.
	Eaton V-CG-SE 4-400W Operating Instructions Comprehensive operating instructions for the Eaton V-CG-SE 4-400W electronic monitoring module, detailing its technical specifications, installation, mounting, and operational modes for safety lighting systems.
	ULTRALED 400/400 ES Reconditioned Anti-Panic Emergency Lighting - Eaton Discover the Eaton ULTRALED 400/400 ES, a reconditioned anti-panic emergency lighting solution designed for tertiary and humid locations. Featuring 100% LED technology, low consumption, and reduced maintenance, these lights offer eco-friendly performance and reliable safety.
	Eaton ULTRALED 2-45/2-8 Emergency Lighting Installation and Operation Manual Comprehensive manual for the Eaton ULTRALED 2-45 and ULTRALED 2-8 series emergency lighting fixtures. This guide covers installation, wiring, configuration, operation, autotest procedures, LED status indicators, and general safety instructions. It provides detailed textual descriptions of diagrams and technical specifications for these safety lighting products.
	Eaton Lighting Design Guide: Mains and Emergency Lighting A comprehensive guide to lighting design, covering mains lighting principles, interior lighting considerations, and detailed requirements for emergency lighting systems. Includes standards, calculations, and practical design advice.
	Eaton NexiTech LED CG-S Safety and Exit Sign Luminaires Datasheet Comprehensive datasheet for Eaton's NexiTech LED CG-S series of safety and exit sign luminaires, detailing features, technical specifications, ordering information, and planning assistance for emergency illumination.
	Datenblatt FI/LS-Kombination Eaton FRBMM-C13/1N/003-A Technisches Datenblatt für die Eaton FI/LS-Kombination FRBMM-C13/1N/003-A (13 A, 30 mA, Charakteristik C, Typ A) mit Lieferprogramm, technischen Daten und ETIM 7.0 Spezifikationen.
	Notice d'installation Sensea.CM B adr Installation notice for the Sensea.CM B adr fire alarm manual trigger system. This document provides detailed instructions on the installation, connection, and configuration of the Sensea.CM B adr, including technical specifications and maintenance guidelines.

Luminox Reconditioned Safety Lighting