TrueLife NannyCam R5
Box Contents
- 1x camera (baby unit)
- 1x parent unit
- 2x USB-C adapters
- 1x wall mounting accessory
- 1x instructions
- 1x safety instructions
Product Description: Camera (Baby Unit)
The baby unit is depicted as a white, rounded device.
- 1. Light Sensor: Positioned above the camera lens.
- 2. Infrared LEDs for Night Vision: A circular array of LEDs surrounding the camera lens, enabling night vision.
- 3. Status Light: A small indicator light located below the camera lens.
- 4. Microphone: A small opening situated below the status light.
- 5. ON/OFF Switch: A slider switch located on the side of the unit.
- 6. Speaker: A large perforated grille on the back of the unit.
- 7. Temperature Sensor: A sensor located on the side of the unit, near the bottom.
- 8. USB-C Input for Power Cable: A USB-C port on the side of the unit for power connection.
- 9. Pairing Button: A small button located on the side of the unit, used for pairing.
Parent Unit
The parent unit is shown as a handheld device with a screen and controls.
- 1. Antenna: An extendable antenna at the top of the unit.
- 2. Brightness Adjustment Buttons: Buttons located on the side for adjusting the screen's brightness level.
- 3. Volume Adjustment Buttons: Buttons located on the side for adjusting the audio volume.
- 4. ON/OFF/VOX Button: A button on the side used for powering the unit on/off and activating VOX mode.
- 5. Charging Indicator Light: An LED on the front indicating charging status: Blue light signifies charging, while no light means fully charged.
- 6. LULLABY Button: A button on the front that turns lullabies on or off.
- 7. BACK Button: A button on the front to return to the previous screen or menu.
- 8. DIRECTION Buttons: A set of directional buttons (up, down, left, right) on the front for navigation.
- 9. OK/MENU Button: A central button, typically used to confirm selections or open menus.
- 10. Signal Indicator Light: An LED on the front showing signal status: Flashing red indicates waiting for pairing, and steady red indicates the camera is connected.
- 11. CALL Button: A button on the front; holding it activates two-way communication.
- 12. ZOOM Button: A button on the front used to toggle the zoom level on the camera feed.
- 13. Microphone: A small opening on the front for audio input.
- 14. Camera Volume Indicator (Baby Unit): An on-screen indicator showing the volume level of the baby unit.
- 15. Speaker: A large perforated grille on the back of the unit for audio output.
- 16. Battery Cover: Located on the back of the unit.
- 17. Stand: A foldable stand on the back for positioning the unit.
- 18. USB-C Input for Power Cable: A USB-C port on the bottom for power connection.
Location of Units
Choose the best placement for your units:
Option 1: For horizontal and solid surfaces
Place the parent unit and baby unit on a stable, flat surface.
Option 2: On a vertical surface
- Use the included mounting attachment.
- The package includes screws and plugs to attach the mount to a solid, clean, and flat surface.
- Once the attachment is firmly in place, screw the camera onto the thread and ensure it holds securely.
Option 3: Use the TrueLife NannyCam Holder
Wrap and securely lock the TrueLife NannyCam Holder (sold separately) to the selected location, then screw the camera onto the thread.
Pairing the Camera
The camera and parent unit are paired from the factory. If you need to re-pair or pair another camera, follow these steps:
- Press and hold the pairing button on the camera.
- Press the OK/MENU button on the parent unit.
- Select Camera → Add camera → confirm with OK.
- If pairing is successful, the parent unit will display “Pairing successful” and the camera image.
Rotating the Camera
You can remotely control and rotate the camera using the parent unit. Wake the parent unit by pressing any button, then use the DIRECTION buttons to rotate the camera in any direction.
Basic Functions
VOX Mode (Sleep Mode)
Set the parent unit to power-saving VOX mode to extend battery life. The parent unit display will turn off and only wake up when the baby unit detects a sound.
Feeding Reminder
The parent unit can remind you when it's time to feed your baby. You can set a specific time with a repeat option.
Connecting Cameras
Manage connected cameras and adjust the volume for two-way communication or lullabies.
Alert Tone
Adjust the volume and tones of the parent unit.
Range
- The maximum range of the baby monitor is 300 m in an open area and 50 m in a building.
- The maximum range and signal transmission can be affected by the environment, such as thick walls or reinforced concrete structures.
- If the connection is lost due to distance, the parent unit will indicate this on the display.
Specifications
Parent Unit
| Feature | Specification |
|---|---|
| Display | 5" IPS, HD (1280 × 720) |
| Battery life (screen on) | 8 hours (brightness level 3) |
| Battery life (VOX mode – audio only) | 16 hours (volume level 3) |
| Power input | USB-C |
| Energy consumption | 5V / 1.2 A |
| Batteries | 3050 mAh |
| Dimensions | 162 x 86 x 22 mm |
| Weight | 0.2 kg |
Camera (Baby Unit)
| Feature | Specification |
|---|---|
| Resolution | HD (1280 × 720) |
| Horizontal rotation | 330° (allows 360° viewing) |
| Vertical rotation | 135° (allows 165° viewing) |
| Automatic night vision | Yes (visibility up to 5 m) |
| Power input | USB-C |
| Energy consumption | 5V / 1.2 A |
| Dimensions | 71 x 71 x 116 mm |
| Weight | 0.19 kg |
Safety When Working With the Device
- Please read the safety instructions provided carefully.
- For proper handling of the product, download and read the latest version of the manual, which can be downloaded at: www.truelife.eu
Printing errors and changes to information reserved.
Manufacturer
elem6 s.r.o., Braškovská 15, 16100 Prague 6, Czech Republic
