RANGER DESIGN 5044 Raised Base for Cab Box Installation Guide
File info: application/pdf · 6 pages · 528.92KB
Installation Guide 5044
Ranger Design Aluminum Van Cab Storage Box Raise Kit, Mercedes Sprinter – 5044 | U.S. Upfitters
Extracted Text
INSTALLATION GUIDE 5044 Raised Base for 5045 Cab Box Sprinter ( Steel ) QUICK START GUIDE Phase 1 - Assembly q 1.1 Setup............................................................................................................................................... 3 Phase 2 - Installation q 2.1 Installation....................................................................................................................................... 4 q 2.2 Install With 5045 Cab Box.............................................................................................................. 5 REQUIRED ITEMS q Cordless Impact q 3/8" Hex Socket Bit 1 PERSON PHASE 1 � ASSEMBLY 1.1 SETUP 1.1.1 Unpack all the components and compare with the bill of materials. 54-608 1.1.2 Verify all parts are present. BILL OF MATERIALS Item No. Description Qty. 54-608 Raised Base, Cab Box, Sprinter 1 90-5020 Install Fastener Kit 1 1.1.3 Fastener kits. 90-5020 Fastener Kit Screw HWH 5� # 92-100 #14 � 3/4" ZINC Screw HWH 5� # 92-104 #14 � 1-1/4" ZINC Fastener Install 5� #92-100 Screw #14 � 3/4" #92-104 Screw #14 � 1-1/4" For technical support, contact us at 1-800-565-5321 5044 Installation Guide | REV. C1 | Page 3 PHASE 2 � INSTALLATION 2.1 INSTALLATION 2.1.1 � Place the cab box raiser between the front seats. � Adjust the position forward or backward to avoid any seat armrests or mechanical handbrakes levers. WARNING: Verify with the vehicle manufacturer before drilling through the floor that no wires, cables or other items are underneath. Adjust the position of the cab box raiser to avoid any items underneath. � Use the 5 self-drilling screws to secure the cab box raiser to the floor. � Select the appropriate screw length to use. For technical support, contact us at 1-800-565-5321 TOOLS q Cordless drill q 3/8" Driver Bit HARDWARE USED 5� #92-100 Screw #14 � 3/4" #92-104 Screw #14 � 1-1/4" 5044 Installation Guide | REV. C1 | Page 4 PHASE 2 � INSTALLATION 2.2 INSTALL WITH 5045 CAB BOX 2.2.1 � Place and attach the 5045 Cab Box on the raiser. NOTE: 5045 Cab Box is a separate unit. TOOLS q Cordless Impact q 3/8" Socket HARDWARE USED IN 5045 4� #92-100 Screw #14 � 3/4" 5044 For technical support, contact us at 1-800-565-5321 5044 Installation Guide | REV. C1 | Page 5 You have successfully installed your 5044 Raised Base. Thank you for doing business with us. For any feedback or suggestions you may have, please contact: cs@rangerdesign.com For technical support, contact us at 1-800-565-5321 5044 Installation Guide | REV. C1 | Page 6