IQ Panel 4 Quick Guide

Johnson Controls

1. Wall Mount

Step 1: With a small Phillips screwdriver, undo the locking screw from the back of the panel and remove the SmartMount backplate.

Step 2: Mount the backplate to the wall using #6 flat head screws and appropriate wall anchors if needed, ensuring it is level. A screw is required in the breakaway wall tamper for UL 2610 compliance.

Step 3: Connect the power supply to the barrel jack on the back of the panel or to the (+) and (-) terminals on the backplate if using a custom length wire.

Step 4: Latch the top of the IQ Panel 4 onto the SmartMount backplate. Swing the panel down towards the backplate and press firmly against the wall. If using a custom length wire, power terminals will automatically connect and provide power to the IQ Panel.

Step 5: With a small Phillips screwdriver, screw in the locking screw from the bottom of the panel to secure it to the wall.

2. Power Connection

Connect power supply. WARNING! Use 7vDC Power Supply ONLY.

3. Power Up

Press and hold the power button on the right side of the panel for 3 seconds to power up.

4. App Integration

ALARM.COM

CREATE ACCOUNT

TRY THE MOBILE TECH APP

5. On-Screen Setup Wizard (Auto Launch)

Once the panel powers up, the on-screen wizard will automatically appear. Follow the prompts to complete your installation.

WELCOME!

Get started by using our easy installation wizard. Please make sure your panel is plugged in before proceeding.

[START BUTTON]

Setup Wizard (Manual Launch)

Tap to access settings tray.

Settings

Advanced (default installer password is 1111)

Setup Wizard (Launch Wizard)

Compliance Information:

UL/cUL Residential Fire and Burglary and UL/ULC Commercial Burglary Alarm Control Unit. Conforms to ANSI/UL Standards UL985, UL1023, & UL2610. Certified to ULC Sub. S545 & ULC Std. S304.

Doc#: IQP4-QG-04-21 Rev Date: 04/30/21

Certified by: [FC LOGO] [C_UL_US LOGO] [GLSYS LOGO]

Qolsys, Inc. proprietary. Reproduction without written consent is not permitted.

Got Questions?

Contact Tech Support:

techsupport@qolsys.com

	Qolsys IQ Panel 4 Quick Guide and End User License Agreement A comprehensive quick guide for installing and setting up the Qolsys IQ Panel 4, including detailed steps for mounting, power, and system initialization, along with the full End User License Agreement.
	IQ Panel 4 Installation Manual: Setup and Configuration Guide Comprehensive guide for installing and configuring the Qolsys IQ Panel 4, an all-in-one smart home security system. Covers setup, programming, testing, and maintenance.
	Qolsys IQ4 NS Quick Guide: Installation and Setup A concise guide to installing and setting up the Qolsys IQ4 NS security system, including wall mounting and initial configuration via the IQ Installer app.
	Qolsys IQ Panel 2 DIY Installation Manual: Setup, Usage, and Features Comprehensive DIY installation manual for the Qolsys IQ Panel 2 smart home security system. Covers unboxing, setup, sensor installation (door/window, motion), system operation, arming/disarming, camera features, settings, messaging, emergency panic, user management, and system testing.
	Qolsys IQ Panel Battery Replacement Guide Step-by-step instructions for safely replacing the battery in your Qolsys IQ Panel using the factory authorized part number QR0018-840. Includes important safety warnings and contact information.
	Qolsys IQ4 NS Keypad User Guide - Alarm.com Security System A comprehensive user guide for the Qolsys IQ4 NS security system, detailing the use of IQ Remotes and compatible LCD keypads, including features, firmware version retrieval via Partner Portal and MobileTech app, and basic panel arming operations.
	IQ Hub Installation Manual: Secure Your Home with Qolsys Comprehensive installation manual for the Qolsys IQ Hub, a 7-inch touchscreen security and smart home system. Learn how to install, configure, and operate your IQ Hub for optimal performance.
	Qolsys PowerG Technical Information Sheet A technical overview of the Qolsys PowerG sensor protocol, including its technology, pairing and device association, placement testing, and supported devices.