Introduction
This document provides instructions for installing the Philips Hue Milliskin recessed smart lighting fixtures. It is available in multiple languages, including English, German, French, Spanish, Portuguese, Italian, Russian, Ukrainian, and Kazakh.
HUE Serial Number: Located on the product itself.
What's Included and Required
Included:
- Installation Manual (represented by icon A and B)
Not Included (Tools Required):
- Drill
- Hole saw (70-75mm diameter)
- Pencil
- Screwdrivers (Phillips and flathead)
Product Specifications and Warnings
Socket Type: GU10
Maximum Wattage: 6 W
Energy Efficiency Rating: G
Dimensions: Requires a ceiling cutout of 70-75mm diameter.
Minimum Clearance: 3 meters distance recommended; 100mm minimum clearance behind the fixture.
Usage: Indoor use only.
Compatibility: Designed for LED bulbs only. Not suitable for incandescent bulbs.
Electrical Safety: ⚠️ Ensure power is switched OFF at the breaker before installation. Follow all local electrical codes. Do not connect directly to mains power without proper wiring and junction box.
Tilt Angle: Maximum tilt angle of 20°.
Installation Steps
Step 1: Prepare the Ceiling
Mark the desired location for the fixture on the ceiling using a pencil. Ensure the marked area is within the 70-75mm diameter range for the cutout.
Diagram shows marking with a pencil, using a hole saw with a drill, and a screwdriver.
Use the hole saw attached to the drill to cut a precise hole in the ceiling at the marked location.
Step 2: Prepare the Fixture and Wiring
Open the junction box cover on the fixture.
Diagram shows opening a junction box cover.
Ensure there is at least 100mm clearance behind the fixture in the ceiling space.
Diagram shows a side view of the ceiling space with minimum clearance indicated (a: Min. 10cm, b: Min. 30cm).
Step 3: Connect the Wiring
Feed the mains supply cables into the junction box.
Diagram shows two cables being inserted into the junction box.
Connect the wires according to standard electrical practices (e.g., live to live, neutral to neutral, earth to earth). Use the provided terminals within the junction box.
Diagram shows wires being connected inside the junction box using a screwdriver to secure them.
Close the junction box cover securely.
Diagram shows closing the junction box cover.
Step 4: Install the Fixture
Carefully insert the assembled fixture into the prepared ceiling cutout. The fixture is designed to be spring-loaded for a secure fit.
Diagram shows hands inserting the light fixture into the ceiling opening, with spring clips engaging.
Step 5: Install the Bulb and Cover
Insert the GU10 LED bulb into the socket within the fixture.
Diagram shows a GU10 bulb being inserted into the fixture and rotated to secure.
Attach and secure the decorative cover of the fixture.
Diagram shows hands securing the fixture's cover with a rotational motion.
Step 6: Power On
Return to the electrical breaker panel and switch the power ON.
Diagram shows a finger switching a circuit breaker to the ON position.
Product Information and Support
For further assistance, detailed specifications, and troubleshooting, please visit the official Philips Hue website:
Company Information:
Signify
I.B.R.S. / C.C.R.I. Numéro 10461
5600 VB Eindhoven,
the Netherlands
00800-74454775
© 2022 Signify Holding. All rights reserved.
Product Codes:
4404 029 06215
929003047001 Milliskin Hue recessed R. aluminium
929003045101 Milliskin Hue recessed R. aluminium
929003047101 Milliskin Hue recessed R. white
929003045001 Milliskin Hue recessed R. white
Last Update: 01/2022
